EP 082 - How to replace the Razer Naga Trinity Microswitch

#razer #electronicscreators
Join my Patreon and support the channel / microchipz
Join the official channel Facebook group / 357411463021624
EP 082 - Razer Naga Trinity Microswitch Replacement
The Left mouse button had become more annoying, double clicking and releasing, so its time to replace the micro switches.

[@miss_editor]

Oh my god thank you for this video! The angles and walkthrough were the clearest I found. (Though unfortunately I don't own a desolder gun, so just a lot more heating and wiggling for me.) Never done this before but managed to salvage my Naga thanks to this! Oh and to anyone else doing this, I used Kailh GM 2.0 (Blue) Switches and they work great, a little more "thud"-ey, but aren't known to exhibit the same double clicking issue as the OEM switches,

[@MicroChipz]

Hi, thanks i'm glad it help you.

[@thefaceman01]

awesome vid, now my naga is back to normal. i wnet with Kailh GM 4.0 so see how they hold up

[@MicroChipz]

@@thefaceman01 Excellent

[@rawralgreat]

Thank you for this! The parts I got from aliexpress (including the bottom pads), and the video instructions are very clear, I really enjoy my Razer Naga Trinity again, cheers mate!

[@MicroChipz]

Glad it helped.

[@deniskostov8126]

Awesome guide. Saved me at least 60 quid! Thanks

[@MicroChipz]

Thanks , happy i could help you and save a decent mouse from becoming e-waste.

[@paulord603]

Excellent guide. Thank you

[@MicroChipz]

Glad it was helpful!

[@zoratrippybieb3453]

Great guide! I have a cheap solder iron from ali, I can set the temp on it ( hope it's accurate) what kind of temp should I be using to try and take them out? and what kind of temp to solder the pins back in? Thank you !!

[@MicroChipz]

350c should do it.

[@alias5152]

I kinda.. broke it.. all buttons work except left/right click / 2 switches which i replaced.. I think i know what i break.. i don't have desolder gun.. so i used metod to warm up the pins and kinda.. "remove it" while i taking the switch back ( to take it off ) and i think i fried that area on the board because it was too much heat i guess.. Is there a way to check if i literaly break it or maybe it has no good contact ( i solder it nicely and switch is all way down ) ? For anyone who want to do this.. learn from my mistake, don't apply too much heat and be patient.. it's weird to do this alone, holding the pcb and trying to heat + taking switch off ( that's the only what i think did and it doesn't work for me, maybe is not this ). Anyway straight forward tutorial, thank you so much showing us this..

[@MicroChipz]

Hi, sorry it didn’t work out for you , trying to get the switch out is tricky at the best of times , double sided board and not having 3 hands .

[@alias5152]

@@MicroChipz It was my mistake i guess.. i should be more careful but yes.. i learned my lesson.. 😀

[@healingdayTV]

Really useful guide, thanks!

[@MicroChipz]

no problem

[@DEATH2U816]

Brilliant video mate thanks for the help!

[@MicroChipz]

Thanks I appreciate it.

[@MrKoti777]

Hi, Thank you very much for this video, I will follow the steps when my microswitches arrive next month. However, do you have a video on how to fix side panel buttons in this Razer Naga Trinity mouse or where to buy a reliable side panel?

[@MicroChipz]

Glad it helped you , i don't have a video on the side buttons , i presume they are tactile switches or some sort of pcb surface mount switch , i would try cleaning the contacts if its intermittent.

[@richmondo0076]

Hey there, I'm having an issue where the side panel of this mouse is not be detected unless I apply pressure on it, it does the same with all of the panels, any ideas?

[@MicroChipz]

Sounds like its dirty , give both sides a clean.

[@richmondo0076]

@@MicroChipz after cleaning I was still having the same problem I did however notice that one of the gold pins on the side gets stuck after putting the side panel on which probably explains why I need to add pressure, I’m wondering if there is any way to fix this?

[@MicroChipz]

Maybe drop a little wd40 on it ?

[@youtubeuserx]

Hello what microswitches did you buy and do you think the Height of the microswitch matters. I can find only 1 model in my hometown and theres a bit of difference in the height

[@MicroChipz]

Hi, i used OMRON D2FC-F-K(50m) from ebay, search for those and you are good.

[@youtubeuserx]

@@MicroChipz Thanks a lot I found them will follow the guide when they come!

[@ILoveCockInMyAss]

@@youtubeuserx Pretty late but did it work? Does your mouse' left and right click still malfunction? Im about to try it next week and im curious

[@alfonso5177]

is Omron D2fc-f-k(50m) compatible?

[@MicroChipz]

Yes

[@Bloker710]

Hey there, can anyone point me to where i can get microswitch that goes under the roll? It's smaller than "clickers" that goes under lmb and rmb and i can't seem to find the right one.

[@MicroChipz]

Something like this , might have to file the button down to make it correct size ? www.ebay.co.uk/itm/362591388429

[@nazarpentsak803]

Does anyone know the part number for the switch that sits on the S1B port of the motherboard that is the switch on the rear of the scroll wheel? looks a lot like these 3 prong switches but is 2 prongs and smaller in size. Thanks in advance

[@Cactus_Knight]

Have the same problem

[@Hibbard1986]

how did you get the old switches out?

[@MicroChipz]

Vacuum desolder gun

[@Hibbard1986]

@@MicroChipz i got a solder iron and it didnt seem to budge to much should i order the vacuum gun?

[@MicroChipz]

@@Hibbard1986 try to add some leaded solder to bring the temp down , it may take a bit of heat

[@Maczuga93]

Hello where you buy switch to mouse my mosue have left switch broken and need change switch to new switch

[@MicroChipz]

Ebay has lots of them , theres a link in the comments below somewhere

[@MicroChipz]

OMRON D2FC-F-K(50m) is the switch you need

[@Maczuga93]

@@MicroChipz thx

[@MrAcuta73]

VERY helpful!!! Do you happen to know of an optical switch that will fit in there? Also, I actually kinda laughed at trying to re-use mouse skates. Buy new ones, they are cheap!

[@MicroChipz]

Thanks , im still using the mouse and the skates have not come off , didn't realize you could buy new ones.

[@MrAcuta73]

@@MicroChipz Amazon, about $7 USD for PTFE feet, 2 sets. I replace mine annually or more often depending on wear. It will feel like a new mouse.

[@Mr_Sephiroth_EX]

What's that desoldering gun brand and model?

[@MicroChipz]

kzbin.info/www/bejne/epO6nnWcaLp1kKc

[@jk1112]

Got dammit, to late for me. Already destroyed my razer naga trinity, should have watch this before.

[@MicroChipz]

Opps

[@helijim]

2 references from NorthridgeFix. Cheeky! 😀

[@MicroChipz]

Better than factory ftw ;)

[@Cactus_Knight]

Hi good video but do can you help me. I need a microswitch for the scroll wheel where can I get one?

[@MicroChipz]

it looks like a surface mount tact switch , where from i cant help.

[@ILoveCockInMyAss]

Hey, in the description you typed "The Left mouse button had become more annoying, double clicking and releasing" do you mean by releasing that if you hold down the left mouse button it randomly stops being detected? because thats the case for my mouse I press the right and left mb and it just stops being pressed even though im still holding it

[@MicroChipz]

Try this site , and yes it double clocks and becomes annoying , if your button is faulty you will know about it. mousetester.com/

[@ILoveCockInMyAss]

@@MicroChipz No my mouse doesnt have the double click problem but more if I drag either of the buttons it randomly releases even do im still pressing down

[@MicroChipz]

same i think

[@ILoveCockInMyAss]

@@MicroChipz Oh thank you so much hopefully ill be able to fix it :D