Essential Mechanic Tools for DIY\Beginner for Toyota and Lexus

A Toyota Master Diagnostic Technician covers Essential Mechanic Tools for DIY mechanics and Beginner mechanics in the field. These are recommendations specific to working on Toyota, Lexus and Scion products.
I made a list of some tool recommendations in my amazon affiliate store which can be found in the link below:
www.amazon.com/shop/thecarcarenut
*as an Amazon associate, I earn from qualifying purchases.
In this much requested video by my viewers and patreon community I'll cover the very basics of tools. There's no way I can cover every single little detail of tools as tools have somewhat of a personal touch but I tried my best to convey as much information as possible in a single video which will help you make better decisions when it comes to tools.
I am a big advocate of experience over tools. I see this in the shop where the mechanics that do the least amount of work have the most amount of tools and the mechanics that do the biggest jobs have the least amount of tools. This theory only works in a single brand dealership. Mechanics in independent shops are forced to have a very large tool set because of the nature of their work.
DIY mechanics often start with the most basic tools and end up over buying or buying the incorrect sets and finding out later they need more tools. If you already know which type of cars you'll be working on you'll be able to narrow down which key tools you need to have in a particular set you're buying.
Follow the channel on Social Media :
/ thecarcarenut
/ thecarcarenut
Check out the channel Merch store
/ @thecarcarenut
Support the channel on Patreon:
/ thecarcarenut
Make a one time donation to the channel:
www.paypal.me/CCNdonate
Check out the amazon store:
www.amazon.com/shop/thecarcarenut
*as an Amazon associate, I earn from qualifying purchases.
#thecarcarenut #toyotamechanic #toyota #lexus #tools
0:00 Intro
0:42 Tools Overview
2:02 Basic Hand Tools : Sockets
8:36 Power Tools
15:34 Wrenches
20:14 Pliers and Screwdrivers
21:52 More Tool Recommendations
23:28 So which brand should you buy?

[@dogsarefun2]

My parents owned a 4 family house that we lived in too. Always helped my Dad paint and do electrical & plumbing & carpentry fixes. Never thought of it as "on the job training" when I was a teenager. Saved me thousands of dollars over the years with home ownership. Still have a few tools we used.... great memories.... Thanks Dad....you are missed.

[@Pepe-dq2ib]

That sucks, divorces are always bad for the kids.

[@joshhemingway7294]

I’ll be 30 this month, and my dad did the same with me (or at least tried, I was a knucklehead back then) those times with dad now that he’s gone, he passed over 7 years ago now, are my best memories. Sounds like you had the same great dad.

[@dogsarefun2]

@@joshhemingway7294 Sorry for your loss. I won't get into all the dumb ass things I did when I was young...but hopefully we all get wiser as we get older... Guess we all wish we could have some do-overs...

[@ricardotrujillo2538]

Good day, I’m glad to read that you had someone the took care of teaching you the basics to survive in this word. Thank God for him. I’m also glad that you recognize him as the great person on your side, blessings to you and your family. I strongly recommend all the fathers out there to do the same, teach your kids/teens or youngsters to defend their selves. Blessings. Unfortunately I grew up with out my dad, he was killed when I was four. I thank God there are still good people that are open to help, like they did with me.

[@ex8280]

I still have PTSD working with my dad, there were only 3 tools in the garage, a plier, screwdriver, and a wrench. Pick the wrong wrench, it always became a scene. Nowadays, if he needs help, it's better to just ignore him.

[@devwhit]

The 👎 is from someone who bought a complete tool kit right before watching this video. 😁

[@charlespayne1909]

Why you have to be right😁. I bought so many tools. Just to end up with a Pittsburgh 301pc set.

[@eliezerramosjr1017]

🤣 🤣 🤪

[@SlowDelSol]

@@charlespayne1909 That 301 set is low key one of the best when it comes to kits though.

[@wolvesdengaming9358]

Lol that was the best message!

[@njstorozuk]

Right outside of the return date

[@salvadorsepulveda6415]

My first tools were hand me downs from my Dad. We went thru his ammo boxes of tools and I ended up with a ammo box of a variety but basic assortment. The beginning of my career. I ended up as a mechanic then as Lead mechanic at our school district for 31yrs with a fleet of 98 buses. Now a great retirement 👍

[@jmartin1915]

That's awesome.

[@ferndog1461]

I drove pass a City of Houston,TX, Fire department ambulance broken down on a city street. Guess the city is cutting back on scheduled maintenance or laid off experienced mechanics. . .

[@JayTdub13]

Gear wrench is highly underrated too! Especially for a beginner. The prices are really really good. Bolt biters will change your life in the rust belt.

[@lindaduke7575]

Excellent video on “proper@ Tools to purchase. As a none mechanic, its very good to know as a “home” user A thank you once again for you open and honest opines A lot of information provided that should be taken to heart. .

[@jamesdodson9417]

Yep been using them for years my box is 75% gearwrench I love them and I have all the brands but I always go to my beloved gearwrench

[@JayTdub13]

@@jamesdodson9417 yep, they’re fantastic.

[@MrOnlinmrine]

I remember when I first started I would binge watch all of Ericthe carguy's content and then Chris fix, Scanner Danner and now I'm binge watching all of AMD videos. The minute I see you post a video I watch it like it and love it thank you so much for everything

[@je19662008]

I still binge watch Scotty Kilmer's clips. He's funny AF and his advice on what to look for when buying vehicles is usually excellent. His repair advice however, is not that great. I remember one time, he was demonstrating how to do a cylinder compression test using a conventional compression gauge. He said if the insert that you screw into the spark plug hole is ever tight or gets jammed for any reason, spray it with WD40. Now, that stuff is petroleum-based and is flammable. You don't want to use it around anything where fire or combustion is present. Engine cylinders have both! The only lubricant that's safe to use on anything that screws into the spark plug holes is copper-based anti-seize, which you're supposed to apply to spark plug threads every time you remove or replace them for any reason.

[@garycasper2929]

@@je19662008 says who..? Have you personally ever tried to light wd40 with just the spark of a bic lighter.??. Try it 1st b4 you go and blather on the web. And FYI if you lube up those spark plugs, you for sure will throw what ever torque setting they’re supposed to be set at into the weeds.

[@timothy5974]

30 years in the Airlines, my Craftsman tools have served me well. Trucks and cars at home a mix even tools from Pittsburgh have been fine. Car care nut is absolutely correct, some my best tools are the cheapest tools. I have literally beat Harbour Freight tools to death and never failed me. Thanx for another great video.

[@timothy5974]

@@Jj-gi2uv I don’t think so. I have more trouble getting a tool replaced with warranty. I go gear wrench or S&K mostly now. I really do have great luck at HF. No problems tearing stuff up. 👍

[@rockyj2008]

That’s because THEY USED to be the best, now their the worst

[@fuijika]

That's the most honest tool buying guide I have seen by far on the internet. Kudos! 👌

[@nordicpride9708]

Yeah I agree! Most of the idiots on KZbin are tool truck fan boys. Of course they are going to say buy only snap on or MAC… when you spend a huge amount of money you have to justify it some way psychologically

[@rightlanehog3151]

AMD, Once again thanks for sharing your practical experience. Your video needs to contain a proviso that buying a Toyota may result in having a lot of dust gather on your tool collection while you wait for something to fail. In general, people can save a lot of money by buying second hand tools.

[@josephr2766]

I’m an elevator mechanic. I still use old craftsman v series USA made stuff, Carlyle from Napa, and tekton from Amazon. I’ve got the added requirement that my tools must survive a fall.

[@jagtan13]

Isn't that a hot second to the tool being able to function as a hammer? Lol

[@starastronomer]

The v series Craftsman tools are very good. I also like Tekton tools.

[@mailmanjoe]

I got super blessed and received my late father's snap on tool box filled with snap on wrenches, socket wrenches and a plethera of specialty tools. Most all snap on brand. He was a master Honda tech for almost 20 years. I'll admit I didn't realize how good I got it until i started working on my own cars more.

[@cayman9873]

That was quite a memory to use your dads tools all the time. Keep them locked up better than you think. Would be sad to lose them. Consider engraving all of them..

[@starastronomer]

@@cayman9873 All mine are engraved with my house number. It is 4 digits. The chances of someone else having the same number is about 0%.

[@Daryl-S]

I feel the pride and joy you must feel! I have my old mans tools, lawn mower and car lol! I'm grateful and blessed too

[@joepacheco4038]

@@starastronomer knew a new mech who used to put a grind mark on wrenchs showed him error of his way - grabbed wrench and add second grind mark and told him I used two marks lol changed his I D marking

[@Not_Sure_]

Amazingly Harbor Freight has some really good socket sets.

[@PaulsToolReview]

My only complaint is the Pittsburgh sets have skips like 16 mm. Their Quinn and Icon sets have no skips so just make sure you realize that before you buy if that is important to you.

[@ericksoler1221]

Im a Toyota Technician as well and I definitely agree with MOST of what was said EXCEPT ever since I started at toyota I bought this 216 Piece tool set from Craftman and I can’t see myself using any other alternatives as much as that set on a daily. No it doesn’t hqve everything and occasionally you might need socket wrenches that can give a little more leverage but that set is so masterfully organized and the 3 drawers are divided all 3/8 in one drawer, all 1/2 in another and all 1/4 in another and it helps me so much not needing to get up of the floor every 3 minutes if I forget something. It only cost me 100 dollars and has produced 1000’s in earnings without breaking or losing any of them

[@ericksoler1221]

Also my experience I use Rigid and stand by that brand in regards to quality and price but Milwaukee is more versatile for a mechanic since the offer some really nice mechanic focused battery tools that Rigid doesn’t that said nothing out there competes with the Rigid subcompact impact wrenches they fit in a lot of uncomfortable areas and makes changing suspension componentes a breeze with a small impact wrench that wont damage anything since the torque isn’t overkill

[@etpy22]

Not a mechanic but I have a very similar if not the same set and it’s been fantastic. I’ve definitely used that 1/2 for things it’s not meant for and it’s held up great.

[@bryanvaldovinos]

Do you know exactly which tool set it is you bought ? Name would be helpful, thanks

[@ericksoler1221]

there is also a 230 piece similar box on special right now that includes torx sockets for 130$ on amazon but the wrenches are different looking so I don’t know if it’s the same quality

[@philipmasse5172]

When I built my toolset, I purchased All my Craftsman tools thru eBay. I Only bought vintage Craftsman tools “Made in USA”. They have served me extremely well.

[@williamwhite9767]

I'm a tool addict. I bought the OTC made in the usa ball joint press with the F150 adapter to replace my truck's ball joints and probably won't ever need it again.....

[@stevejette2329]

Now 76, I have been working on cars forever. Best tool: a jewelers eye 'lupe', 10 power. Sold in sets at Harbor Freight, 5 for $5. Close exam of threads, sliver removal, worn off part numbers, black on black plastic ... and as I get older ... ya.

[@pamed76]

I don’t drive a Toyota. Still, I love your videos. I’m a simple diy Mercedes guy and in really every video you posted I’m impressed by your attitude. So honest and correct. Please go on giving people knowledge!

[@retiredafce3373]

Awesome video! I got to replace the struts on my 99 Camry. What I love is how easy Toyota has engineered the car to perform maintenance with minimal tools.

[@terrysteel6706]

Well they don't make the oil change easy when you need a special tool to remove the filter cover. Poor design for what ? 😎

[@lejoshmont2093]

If you don't have the wobbly sockets and are working on the v6 you might be cursing those same engineers. 5sfe Camrys have access for days and are very easy to work on. One of the harder things to do on that car is actually the front sway bar bushings.

[@retiredafce3373]

@@lejoshmont2093 yeah I have the 5sfe and I did the sway bar ends. It wasn’t too bad. But I’m happy it’s not the v6.

[@coloradoboo1071]

I've been waiting for this one....great job! I agree, don't waste too much money on the professional grade stuff when other stuff will get the job done that we don't do every day! As a DIYer, I've found putting certain tools/items in those big orange Home Depot tool boxes (and are labeled) helps...I have "oil change" and "brake job" and "tire tools" and "electrical tools"...really makes the jobs go faster. And the 10mm socket stays on my little cheapo cordless power wrench...Toyota loves their 10mm bolts!

[@PaulsToolReview]

I believe you will need 16 mm socket for the Toyota Supra wiper arm nuts assuming it uses the standard size as most BMWs. In a pinch, you can use 5/8 inch SAE as its close enough if you have that. Also for the supra, you will need a good set of torques and allen (hex) drivers and/or bits especially 8mm, T20 and T25. For the home diyer like myself with 3 different manufacturers in my garage, you should just get sockets, bits, and wrenches without skips. Make sure all your hand tools have lifetime warranties like Icon and Quinn from Harbor Freight, Tekton, VIM, and Gearwrench. Also one last tip, the harbor freight quinn individual 90T ratches are identical to gearwrench and come from the same factory eith only cosmetic differences. You can save a few bucks at HF quinn rebadge and they have a great warranty process if you live near one.

[@marcellinden7305]

Building your tool kit is a life long thing. Way back in 1981 I bought a Stanley 1/2" metric/SAE socket set to work on my RX4, and it is still my main socket set today. Only last year I spent over $2500 in new tools at one retailer, and well over $4000 in unique test gear for my trade in communications electronics.... Yes, you are always buying more tools. Am so glad I haven't needed to use any of my tools on my Toyota so far...even though so many live in the back of it, including the socket set...

[@WhalerGA]

I bought one of those "mechanic's tool sets" (~ 300 pieces) about 20 years ago. I was lucky. It was the made in USA Craftsman variety. It was a really good value. I'm a fairly light DIY user so I still have the entire set without a single piece lost or broken. I guess I will sell them when I'm too old to use them.

[@lordjaashin]

how much for the whole set?

[@57bbb]

still have the entire set? Did you lock the 10mm spanner in a secure place lol

[@toyotatundra0455]

I wish I've seen your video 15 years ago. I've spent a lot of money on tool sets and they're collecting dust in my garage. As a hack and DIY, I've been using the Astro Pneumatic Tools and I have no complaints. I don't know who makes their tools. I did purchase several Craftsman tool sets from Sears and 90% of them have not been used. I own Japanese cars and the SAE tools are still in the original box.

[@coloradoboo1071]

Also handy tools are a 5/8" swivel magnetic spark plug socket (with a thin wall socket) and extra long Metric Allen Hex Bits (the 5mm is needed to remove/replace those intake manifolds). I, also, find myself using my needle nose pliers with 45 and 90 degree bends for a lot of things (hose clamps, cowl clips, etc.)

[@dgdiyer1191]

Great practical advice on this video. Based on the AMD rating scale I am just an "apprentice" that mostly does DIY brakes and suspension work. Having done brakes, struts, sway bar links, lower control arm, hubs, tie rods and more, I offer a couple of other tool considerations. 1) The corded impact drivers are another option that are bulky but reasonably good. Mine easily spins off lug nuts. 2) Jack stands. Since most of us DIYers don't have lifts and safety is at a premium getting under a vehicle consider jack stands made 100% in the USA.

[@landshass2849]

20 years ago, I started changing oil, I bought my first socket set from Kmart, champion brand. I still have them, the metrics are dirty but the standard are still shiny.

[@zacharypeery4082]

I've used 10mm socket by far the most on all types of different vehicles, that's the one I'm constantly replacing in my 220 piece set

[@lewishein1337]

Pawn shops often have a bucket or two of sockets. If you're broke and patient that can be a really good way to put together a socket set

[@staplezification]

Was looking at buying a complete tool kit as I felt like I never had the right tools. After watching this video I now know have 95% of the tools I will need to keep working on my 03 sequoia. And I just did my front suspension this weekend with 3 trips to get specific tools I needed 😂

[@rlenoxIII]

100% agree with you on IR guns, I bought my 1st one (IR231) as an auto tech student in 1989 and it’s still running strong. But have switch over to the M18/M12 stuff from Milwaukee

[@c63amgblack]

I'm a tech at a truck dealership who owns almost exclusively Toyota vehicles. Your advice is very interesting from my perspective. It makes sense in hindsight having worked on my cars, but at my job, the trucks use a smattering of s.a.e. and metric, 3/4 inch drive is a must, but also a long 1/4inch ratchet for high torque in a cramped space. Love your videos! And your voice is oddly soothing

[@kevinthacker8349]

The one tip,I got helping a neighbour (mechanic, ) when I was about 16 was. Keep your tools clean, something I sill to today at 64. Sill remember friends asking why I helped him for free. Ok he never paid me in cash, but the free teaching have save me more over my life time

[@sc3ku]

Biggest game changer for me this year was a 1/2 brushless Makita impact and a set of deep-well Icon impact sockets from harbor freight. The set goes down to 10mm, so the tool is so versatile for fastener removal-especially with the impact on Pwr Lvl 1 and in “fastener mode”, which auto-brakes once a fastener is loose, so as not to damage smaller stuff

[@shanedottie]

Savage

[@michaelbrennan7148]

Thank you. Don't forget a good jack and ramps as well. Eventually you can save up enough money for a lift :) Take care

[@deedle6073]

Thanks for an honest real world opinion. Some of these other tool KZbinrs I swear sound like undercover Snap-On salesmen.

[@nordicpride9708]

For a professional mechanic who is in a shop environment, Snap On is King. As stated in this video, a DIY application is far different. The truth is some Snap On stuff is a lot higher quality & far more DURABLE. Metallurgy is a thing. So it’s not a lie when someone says Snap On wrenches or sockets that are USA made are better than most Taiwan brands. This is a fact. Those who don’t understand manufacturing differences are ignorant to this. But for DIY there’s not a huge need to drop a lot of money on this type of tool. Cheers 🍻

[@perniciouspete4986]

Yes, I will own Toyotas forever. Thank you so much for this video. It's extremely helpful.

[@rickproulx6667]

Thank you for your knowledge on these tools, I appreciate all your videos 🙏🏼

[@fevzay9315]

You are my favorite spot on KZbin. Continued success, AMD.

[@danmccarthy8554]

Great, solid advice, regardless of what make you’ll be working on, any newbie wanting to get the best bang for the buck will benefit by the wisdom shared in this video. Some common sizes may be different but the basic guidance given will steer you in the right direction. I’ve been working in & around mechanic shops for well over 40 years and have called on several thousand shops in the 15 plus years I’ve done outside sales. Some advice I can add: Milwaukee cordless rules by far for cordless tools, rarely do I see DeWalt or the Mac version of the same. The Milwaukee holds up very well and works terrific. My favorites of their line up are the fuel 1/4” M12 hex driver, the fuel 3/8” M12 stubby impact and the fuel M18 1/2” mid torque impact. Their high torque 1/2” is a total beast but is significantly bigger and unless you work on large trucks or equipment the mid torque should handle most folks needs. Their grease guns are great for service use, Also like the M12 ratchets. I have a 3/8 regular and am seriously thinking of trying the new fuel high speed. Stick with impact sockets rather than chrome, cheaper & tougher, just not as easy to spot if you drop one. Gearwrech tools are pretty popular, work very well, see lots of Sunex sockets, work great, hold up well and very reasonably priced. Ingersoll is the way to go for air tools, top notch. A good set of prybars is invaluable as is good lighting. I am very fond of my SnapOn ratchets, really a pleasure to use, one place I think paying extra is worth it, and their flank drive wrenches are wonderful, especially on goobered up nuts, but I got mine years ago when they were far more reasonable, no way would I spend what they’re going for now. Their hose removal tool and small pic set are both super too. Lastly, Knipex are worth what they cost for pliers etc IMHO, best I’ve tried.

[@psdaengr911]

Most of hand tools are 40 years old Craftsman from 10-40 piece sets, but I've rarely used any of the sockets or combination wrenches outside of 8-14mm on a Toyota or Honda I've maintained. (None of them are outstanding quality except for the plating.) I have 2 dedicated wrenches for oil and tire changes. All the hand tools I use for car work fit in a pocketed tool roll I keep in the car. The stuff I rarely use is in an old large tool box gathering dust. That's where the large sockets I needed once to replace a clutch and wheel bearing reside. I discarded all then blow molded cases and bags those tool came in. I have few automotive power tools - a DA polisher and a tire compresser. I have many more tools for carpentry, plumbing and light appliance repair than I do for automotive.

[@Glenn_123]

I can not thank you enough for this practical "down to earth video". I have the older Craftsman tools that have been past down and some Pittsburgh stuff mixed in along with Husky..... I own one Snap-On wrench and it has not made me any smarter! Thanks again for what you do.

[@inasingtr]

Your honesty always makes your videos enjoyable to watch. My latest favourite tool. Chain wrench. Boy those camshaft bolts are tight!

[@stephenharvey5289]

Being a machine repair person for 30 years.. the true job is in your knowledge anyone can turn a wench, but know where and why is most important!!!

[@ethchhun5648]

Thank you so much about your advising us about what Tools we need to have

[@Thankyou_3]

Great video AMD, always enjoy your wisdom and encouragement.

[@12345.......]

Get a brand that is easy to warranty. Lowes, home depot, harbor freight. Always look for the discounted tools. A set of ratchet wrenches at lowes on discount was $24

[@je19662008]

I've heard nothing but bad things about Harbor Freight.

[@gianmariavolonte4315]

43 years at the Ford/Toyota dealership I have quite a collection of tools. I even have a special box of insulated tools for hybrid vehicles. Lucky for me, I bought a lot of new "real" Craftsman tools right before they turned to junk. Snap-On, I have very few, but they are specialty tools that see very heavy duty use. I can't justify the price of Snap-On tools for everyday wrenching. 100% agree on Husky and Gear Wrench, really good tools that have never failed me. Air tools...... Ingersoll-Rand all day!

[@RawSauce338]

Im a big advocate of starting with hand me downs! Go to garage sales and find old mechanics and tradesmen- tell them you need to put together a toolkit and are looking for pieces. I've met many great people who are glad to repurpose old tools to a starting DIY mechanic- I got old tool boxes full of automotive, soldering, electrical, etc equipment for great prices and people are just thankful to get rid of things they dont use amymore.

[@AldenPez]

I was about to ask for this video! Awesome that you already made it!

[@thepokerpilotapp]

AMD- I’ve been following you for quite a while now. You are not only informative you also present well and clearly. Bravo!

[@barryraven4745]

Very much enjoyed this video. I own a 4Runner and this really helps.

[@ChrisWilliams-pu8pj]

Your usual great presentation. Thank you!

[@megahurts2]

I will say, I feel very blessed to be able to use my dads tools for the repairs I've had to do so far. He's slowly over my entire life collected quite a few and man is that a money saver. Also, one can sometimes find good deals on tools at garage sales, auctions and places like that where (assuming you know what you're looking for) you can buy quality tools for quite cheap.

[@joruckus]

This video is very valuable to me! Thank you for taking the time to do this!

[@drewncars9505]

One of my biggest suggestions no matter the brand of power tool try to buy the same brand with swappable batteries. You can very easily eliminate the waiting for batteries to charge issue by just simply swapping the battery from one tool to the current tool and charge the one that’s dead. I know you didn’t like snap on cordless tools but I work on semis and have had their smaller 3/8impact for almost 5 years. I use it every single day and it’s never let me down. Keeping the rule of batteries I went ahead and got a flashlight and ratchet that all use the same ones. Could be better options but the modularity of them is awesome! Hand tools I’ve never understood why people use so many different ratchets but it’s also because I work on semis so tight spaces exist but not super often. I have two 3/8 ratchets one standard fixed head and one flex head with a long handle. 1/4 I have a mini ratchet fixed head and a locking flex head with a decent handle on it. I love gear wrench on 1/4 I started with snap on 3/8 and never replaced any other than a 10 I broke not lost (shocking right?) cheaper brands work great for diy guys but professionals should not be afraid to buy cheaper stuff sometimes. I use metric mostly so I buy higher quality metric but cheap standard as I don’t use standard much. Half inch I’ve been super impressed with Pittsburgh impact sockets. Again I work on semis and I’ve never broken a Pittsburgh impact socket. Wrenches honestly I think the larger the wrench the less you really need to have be expensive as they don’t need to be super tight clearance or super tight tolerance. I suggest only getting ratchet and stubby wrenches as you need them. I don’t own any of either. My regular length snap on wrenches have done everything I need them to do and for larger wrenches over an inch I have craftsman which work perfectly for me. Don’t get caught up in sets as they can cost you a lot of money buying stuff you don’t need! I always buy individual tools if I can whenever I need them.

[@kenburdier5884]

Thank you for this great video AMD! You did a great job and appreciate the size recommendations for the size socket's. I appreciate your knowledge and help, Thank you again

[@jamesdelong6401]

OUTSTANDING breakdown of what a gear head needs. Great video. 👍 love the way you dreak down your teaching and guiding people

[@geraldbriceno7425]

I'm so happy I found this video. Thank you so much sir.

[@Jeff-yf8pf]

Good info. I also love the Ingersoll it really lasts forever and have rebuilt several of them. Another thing I have noticed if your air line isn't big enough you lose a lot of power

[@Ineed2fabb]

Your so correct, thank you I really enjoy your videos and learn things cuz I'm always learning there's not a day that goes by with out learning some thing it might be small or large but it's some thing I did not know there's so many models out there it bogles the mind...

[@techman7141]

Great Video!, Thank you, I found your video really educational. Thanks for breaking down the tools you will really need to work on cars. Tanks for your honest opinion on tools and tool brands.

[@707ArtWorks]

Thank you so much for sharing your experience and wisdom through your videos. So much appreciated. As a tier 3 quality inspector for the manufacture of some of Toyota parts, it’s nice for me to work on my own RAV4 in my free time with confidence - knowing I’ve been advised by a professional, one who can relate to the DIY home mechanic. God bless! 👍🏽

[@manuelbejarano6121]

Thank you so much for this information!! BIG HELP.....keep up the good work!!!

[@garrettmcnulty1522]

This is perfect as someone trying to get a job at Lexus, thank you!!!

[@mattb9664]

Make sure your power tool battery comes with a long warranty. While using the 1/2" impact for breakaway torque, you likely will encounter and cause the battery voltage to drop, which causes the tool to stop rather than constantly hammering/impacting the bolt/nut to removal. The battery is still technically good for lighter torques or use as a vacuum or flashlight, but the battery really needs to be a higher quality level to sustain voltage drops experienced during higher loads. During a warranty request, they usually will let you keep the defective battery which can be used for lesser demand tasks.

[@jasoncampeau2948]

I love the 1/2 in cordless impact, takes off truck tires 👍

[@MPGunther1]

Being an Electrician, I know all about having the right tool for the job. Loved the video CCN.

[@normcook9335]

In Canada, don't overlook the maximum line from Canadian Tire. The majority of them have been very good quality for the DIY mechanic. The rest of my tools are Legacy Craftsman and I have a few Snap-on

[@ohadparan2853]

Dear Sir, I don't know if you are still reading the comments on this older video--but this is incredibly helpful! I watched it three times, and I paused the recording to make a list of your recommendations. I own a '97 4Runner and an '81 Mercedes 240D, which both use metric, and my investment in these tools will let me work on both my cars. Thanks for all the detail and logical reasoning.

[@landonashby2029]

As a DIYer I've been impressed by Tekton especially the Ratchet sets and standard Wrenches. Great Video!

[@cayman9873]

I have added on tekton stuff in the last years and have been very happy with them

[@bigdm9349]

I've got the full socket and wrench sets. Get a lot of tool for your buck. Easy to turn a profit for an entry mechanic.

[@johnmcrae5043]

My first ratchet/socket set was a 1/2-inch Penncraft set that I bought at a J.C. Penney's store, back when they had a hardware/paint/firearm department. I worked there during high school; their tools were made by Husky. My Dad liked Western Auto (Wizard) hand tools; I inherited a few of those.

[@ybgrsfd]

Great video! I've been buying a lot of Tekton tools lately and love them 👍

[@billybunt3716]

Thankyou for taking the time to make this video, i found this the most informative and helpful video i've watched about this subject.

[@jontnoneya3404]

AWESOME! THANK YOU! It's so hard to know what we need but this really helps. I would make one slight adjustment to your recommendation. When talking about electric vs pnumatic you said something like "Don't buy corded tools because you'll have to fuss with the cord and all that, buy cordless". I would say that corded tools offer a VERY affordable alternative and sometimes have better specs than the cordless. Harbor Freight has both the Bauer and Chicago Electric brands of corded impact wrench which have very impressive stats and based on reviews here on YT, seem to hold up really well. With a coupon for 10-25% off, this can really help the budget minded mechanic and offer a powerful tool. Anyways - keep up the great work you're doing on here. I learn so much from you.

[@surintanguay9630]

The 13mm size is fairly common outside Toyota. I recommend having a complete set because it's annoying when you need the one size you're missing . Fairly common with metric sets although SAE are always in a complete sequence.

[@Saladon89]

Thank you, I was waiting for this video, I luv tools, tool head, always looking around wut to buy next

[@mr.j8297]

Another great practical advice, extremely valuable!

[@philipmasse5172]

This man is AMAZING! Thank you.

[@mitchmalicoate2464]

AMD this is most awesome. I am getting more into more advanced diy repaires on my 2004 Tundra due to you and the Toyata Maintenance guys channels have given me the confidence to do timing belt , serpentine belt, valve cover gaskets, ball joints tie rods, brakes . I would much spend the money saved on travel.

[@danhal9966]

Great information,I continue to love your videos! Thanks

[@MadjikMan56]

Great video, thank you. For Toyotas I'd also recommend picking up a couple of JIS screwdrivers. Phillips heads tend to round out fastners.

[@Jayda08]

Back in 1996 a friend of mine bought me my first tool set at Sears. It was a Craftsman 56 piece set. To this day, I still use that tool set. Yes I did added some screwdrivers and a dozen specialty tools. But that tool set allowed me to work on Import, Domestic and JDM vehicles as DIY mechanic. And the only power tool that I still have, is a Ryobi cordless drill that came with a flashlight.

[@MrPeterJHarrison]

I started learning how to repair cars in the 70s with my Dad. Our first big project was a complete teardown and rebuild of a Dodge 270 cubic inches V8 for the Dodge Dart. (The same car I learned how to drive in three years later.) I still have some of the Craftsman sockets and wrenches from my Dad's tool kit.

[@frankcastle797]

You consistently produce quality content. God bless you!

[@rajendradathkalipersad1294]

Fully agree with you when you say it's not about the tool, but experience. If you are a DIY on a tight budget, you can be innovative to get the job done. 🇹🇹

[@riceburner4747]

Well said AMD. And great advice!!👏👍

[@jonathanmuniz4341]

Thank you for this video. Getting ready to invest in some tools to do my own basic maintenance on my 06 Sequoia and 04 LX 470 and this saved me from making some uneducated purchases. Love this channel.

[@JDM797]

I wish i had this video a couple years ago when i went on a hoarding spree collecting all sorts of tools i rarely use...I'm that apprentice 😲...Thank you for yet another informative video 👍

[@charlescatanzano5712]

Love the video, wish I saw it sooner. Please keep the videos coming.

[@N7492]

Excellent advice. I've been DIYing for 50 years, and I had to discover much of what he recommends the hard way.

[@viperxbr]

Excellent video AMD! As a Canadian I want to add that I would highly recommend the brand MAXIMUM/Mastercraft which is from our national auto store, Canadian Tire. Most of these tools come with a lifetime replaceable warranty. I had a 13yr old 3/8" Mastercraft torque wrench which failed on me. Brought it in and they replaced it on the spot, no questions asked! Great service for us DIY'ers! Cheers!

[@colmillojones1543]

Tools are like those good books to read, never lend always ready to help👌

[@h2o40fpv]

Im been buying a couple of sets before I saw this video and more or less Im with what you been saying thank you.

[@markreynolds3850]

Thanks for sharing this video, very interesting and informative, thanks so much.

[@shirmworm]

Hi!!! I just completed purshasing nearly all the tools (including power tools) as you recommended in the vid. My budget of costs was about $1,100.00 - $1,200.00 Thought subscribers may be interested. Thanks again for your help!!! Best!!!

[@chrisbritton8326]

thank you for this informational video. This is the kind and type of video I was looking for you to do. A behind the scenes/tool review. I'm the owner of a used 2011 scion tc 2.5l auto. I enjoy the car and learning from Toyota mechanics. You have good way of teaching with your videos. I look forward to watching and learning from you. thank you.

[@fizout]

"Open the top drawer of my toolbox, this is what you will find. These small number of tools..." *proceeds to show 8 drawers of tools worth $$$* :D Yes, not much for a professional, but quite the assortment for a DIYer. Still, love you AMD! Always good content and advice.

[@sleekitwan]

Very useful, because a beginner to Toyota can never possibly know this, no matter how studious, unless someone tells them. The only caveat is, if you buy different makes of car, or your wife etc has a different make or ‘size’ of car say, it’s inevitable you end up buying most of the sizes you don’t have! It’s always 8pm on a Sunday night, when you need the job finished, that you find that one darn bolt or nut, that’s a weird size, but your advice stands even this test - buying the whole lot blind, is costly, and if you can home in on a selection of sockets etc, you buy good ones. Don’t buy crud made out of cheese! Proper spanners, proper metal treated and tempered, and of the right alloy etc, costs proper money. And the first time you are forced to use a breaker bar, you will find out how good the sockets are. Usual top notch from CCN, thanks, take care all.

[@charliebates9141]

Jeez louise I love this video and wish I would have seen this before I started buying a lot of my tools. Oh well live and learn, but thanks for putting this out. Also I’m gonna use this list for tools I haven’t bought, and it will help when friends and family ask what I want for Xmas and bdays, lol.

[@p6102zrfxe]

Really useful video. Thank you AMD.

[@irfanspace]

Great topic , i collected my tools base on my work and always plane to buy on black-Friday or any day when sale is going on such as memorial day etc , and got knowledge while i use to go to the GYM , some people do the same exercise by using different machines and result same exercise for same muscle or portion for your body , same way sometimes tool work same way if you buy different brands etc , make sure the tool you have possible good for multipurpose use .