EZCAD2 ENGRAVING SOFTWARE AND ADOBE ILLUSTRATOR TUTORIAL PART 1

[@antonradanov7625]

Great job. Thank god there is people like you, taking there time to this kind of videos.

[@toddltomlinson]

Great video - you just took all the mystery out of using EZCAD2 and Illustrator!

[@penslineusa]

Thank you so much for sharing your expertise. This will save our company 100's of hours.

[@phantienhung93]

you did an incredible job. I stuck on it for a long long time. Thank you so much

[@PatriotCoinRings]

Yes, this is what I was looking for! Same situation, bought the 50w fiber laser and couldn't get support on how to use the EZCad2...uggg. You're awesome!

[@PatriotCoinRings]

We might have the same machine, no matter how many times I called support about how I'm also in demo mode they won't give me a registration code or dongle (they said it's internal) and I was thinking hack as well. Well, great to know you confirmed it still works in demo state.

[@PatriotCoinRings]

OMG This is incredible and he speaks English!!!! Okay, tell me your in California so I can pay you for some one on one training!

[@PatriotCoinRings]

Binge Watched your entire KZbin channel last night!!!!

[@seanmerrill203]

@@PatriotCoinRings I was told to turn on the laser, red light then run ezcad to get out of demo mode.

[@PatriotCoinRings]

@@seanmerrill203 I was told something similar by a local laser shop who said that's the way to start up the dongle first. I'll try that, thank you!!!

[@gunhappyie]

Excellent Video and thanks for taking the time to post it. Im in the same trade just in europe :P It seems like lazers are hot at the minute :P

[@johnedlin517]

Excellent video and I would love one on EZCAD setting up to engrave wedding rings inside and outside.

[@chadshoemaker9687]

I appreciate the video... o just purchased a fiber laser and been running into the same issue of no training.... I am having problems trying to get the rotary to rotate when engraving Tumblers!!! Do you have a video of the rotary parameter?

[@jackiewebb9580]

once again thank you very very very much!!!! big help

[@complianceedgeknives]

Thank you so much for posting this!

[@AdamG81]

Super helpful! Thanks so much!

[@ΜΟΛΩΝΛΑΒΕ-μ5μ]

Great videos. Thanks for the explanation! My laser arrives next week. I don’t have AI, so I’ve been using Inkscape. Any chance you know how to do pattern fills that way? For like stippling?

[@yassineidmalek7040]

Thank you . i have a question please. i strugle adjusting the laser power and most times engraving rings. ring engraving thier little bet different and i haven't fegure out the whole thing yet

[@Designedbyalebanese]

you sir are a ROCKSTAR!

[@sunfirephoto]

excellent!!! You talked about Color engraving Steanless steel.... Where can I learn about that?

[@ChrisCustoms]

Hey there hoping I can get a little help here. I followed all the exact steps of your video however, I'm having trouble on Ezcad 2 in hatching the HK. I'm only getting the outline. Would you happen to know why? Thanks! Any help is GREATLY appreciated!

[@kelbyparker9712]

You probably find assistance here: facebook.com/groups/368089227540080/

[@ChrisCustoms]

@@kelbyparker9712 thanks I got it going!

[@Bkinsman2719]

@@ChrisCustoms did you end up figuring it out? I only get outlines and its driving me nuts

[@ChrisCustoms]

@@Bkinsman2719 Hey Brandon, yes! Once you hatch the drawing, zoom into it and you’ll notice the hatch marks. It’ll work!

[@EliasGrunberg]

Hello! Nice job on the video, very exploratory. I have a co2 marking machine for non metallic objects and it also uses EZcad2. I have a question, is there any configuration on the software that allows to engrave a round surfeses without (or at least with less) deformation? I need to engrave a logo on a 15 cm diameter wooden tube. Thanks !

[@ajimachining2537]

You need the rotary attachment or it will distort if you try to engrave a flat over the edge of the diameter where it falls away from the focal point.

[@EliasGrunberg]

@@ajimachining2537 Yes! i've seen videos with the rotary atachment, but my engraving wont pass the edge, its just a segment of 12 cm perimeter over a 15 cm diameter cilinder. I just need some kind of distortion on the vector image so it wont appear distorded on the engraved material. I dont know if i explained it clear, hope you can give an answer! Greetings.

[@ajimachining2537]

@@EliasGrunberg you could try pinching your art work in a vector program to make it look like an hour glass or bulge it. It will be trial and error. Also you could move your focus a little lower.

[@EliasGrunberg]

@@ajimachining2537 Thats good! Ill try that, thanks!

[@jojozam278]

Ok this video is excellent but sometimes when i open the vector file on the ezcad2 and i click on the H buttom it disappear some vectors can you help me with that??

[@bobreichel]

I've try using inkscape, illustrator and a converting online sight with SVG. DXI and AI none will open there just shutting down the program. Ive got no idea what to do.

[@sathurshananthi9558]

Hii, can you show how to mark patterns on ring using rotary device? Starting from illustrator to ezcad

[@matthiasgreiner8479]

You may can help me. Wenn i open an file the grafic ist shown correct in monitor, but the F1 button that shows the preview shows the logo rotated by 90 degrees. When i rotate it in the software it will fit. so, do you know a solution...? Thanks a lot!

[@rfulmer4395]

I did your exact same tutorial, but after the hatch settings, my colors did not fill? not sure why?

[@اسمك_ذهب]

👍👍👍👍

[@91BigRed1]

I’m having an issue with gaps in my images while burning. When the turntable turns for the next section it leaves a gap between the sections instead of making it a solid image. How can I fix this?

[@ajimachining2537]

Have you set the correct diameter in the rotate mark dialog box?

[@bachelorettepartyshirts3405]

HI, can you do one with Petid tags?

[@jackmoore8097]

Can you set the ezcad program from metric to inches

[@kelbyparker9712]

Try to ask in EzCad group: facebook.com/groups/368089227540080/

[@nasirmeghani5311]

Hi. Thank you for your videos. We have logo imported from corel draw and when we import it's not clean. Can you help how we can clean it. Thank you in advance. Nasir

[@penslineusa]

From CorelDraw there is no need to export to Illustrator. In Corel Draw enlarge the art to 10 inch and export to PLT and use in EZ-CAD2

[@shaunm2208]

Thank you sir

[@bobreichel]

Would Inkscape work as well? I have AI but on my Mac. I wish ezcad would work on Mac.

[@ajimachining2537]

Probably should. You will need to export it to DXF. I don't know if it will take a native inkscape file. You have to experiment like I did with illustrator

[@Bai_lu0923]

Click Mouse wheel to drag the model.

[@bobreichel]

I have illustrator CS6 and saved as AI 3 but will not open with ezcad2. Just shuts it down.

[@trollocat]

I also used Illustrator 8

[@lfmas7483]

From where can I output images to print them

[@fernandonunezaguilar783]

Hasta ahorita ninguno en español, tengo está máquina láser fibra óptica 50w.

[@fernandonunezaguilar783]

Como me gustaría encontrar un vídeo o tutorial en español

[@bolsopasionvideos757]

Alguien sabe cómo hacer para grabar el círculo prefecto? Uso la herramienta del círculo pero cuando lo grabo no me queda prefecto. Necesito ayuda urgente, ya que gasté mucha plata en mi máquina y aún no la he podido usar. :(

[@vnrats]

Super helpful! Thanks so much!