WhizzKids Drive and also why are you even commenting that its bad anyways?
@mouseplays15465 жыл бұрын
It works i tried and its the easiest you can get so stfu
@ariannaandmesellslimecomeg2225 жыл бұрын
I just face palmed so hard, I felt my brain.
@MarkyMooMoo5 жыл бұрын
Story Man 👌👌👌 I’m dying XD
@SRehill75 жыл бұрын
2:39 Fundamental step to pairing 2:58 Insertion 3:22 Corner/Edge not on top layer 3:44 White on top 4:05 Paired, but edge flipped wrong 6:26 Mistake 1: Edge placed on wrong side of corner 6:57 Mistake 2: Edge gets pushed into middle layer when showing corner during pairing 7:27 Mistake 3: When solving a new pair, you mess up a previously finished pair
@JPerm6 жыл бұрын
I like how simple this tutorial is. I personally am also a fan of "being able to do it" more than "doing it the best way", as a guideline for teaching, like you have presented it here. But I think you need a balance, because the simpler a concept becomes, the farther it strays from being the best way to do it in practice. At first I liked the simplicity of your method, but I think the lack of different techniques actually make this method slower than layer by layer, and requires a decent amount of relearning later on (such as ignoring RUR' inserts, and ignoring white-on-top for the corner). For ease of learning I think you did a really great job, but I don't really agree with the details of the method being taught.
@ChrisBandyJazz6 жыл бұрын
J Perm Thanks. I set the balance so that people could at least use F2L to complete a solve. This video is already 8 minutes long, so I didn’t want to start adding on more advanced stuff. If you watch my next video “Essentials,” then you can get some of the more intermediate techniques! A lot of people ignore that video, which is unfortunate for them.
@diegomastro56816 жыл бұрын
J Perm What were you doing seeing this lol, I mean you know a little more than begginers f2l :D
@marispedrabuena34573 жыл бұрын
@@ChrisBandyJazz i still cant get it so hard
@mrinvincible68493 жыл бұрын
J perm, finally I learnt f2l after watching that video more than 100rd times
@kilrazz29553 жыл бұрын
J perm your my favourite cuber
@ajaygodase4 жыл бұрын
This has to be the only tutorial you need.... instead of memorizing algorithms... You made me understand what I'm actually doing with the cube... Kudos to you
@miguel000004 жыл бұрын
dude, the other tutorials were so complicated, but this was really simple, it helped me a lot, thx!
@meryemnaciri7673 жыл бұрын
Yes this one is too easy and efficace
@gsrajj2 жыл бұрын
Exactly
@martinbruzek63835 жыл бұрын
1:28 yaah it's rewind time
@Twitchte5 жыл бұрын
Ah ha ha, ah that's hot, that's hot.
@jadesmediacorner5 жыл бұрын
this is the most easily digestible F2L tutorial ive ever seen. im gonna be somving F2L in no time
@charleshsieh95633 жыл бұрын
damn I've watched 4 f2l vids and there's still no vid that i could understand and actually learn how to f2l from it, anyone tell me how
@kraziforce24733 жыл бұрын
Same here
@heatplayz82423 жыл бұрын
Watch jperm
@heatplayz82423 жыл бұрын
@@kraziforce2473 watch jperm
@animalfighters69076 жыл бұрын
2:38: One Step to Pairing 3:18: Three Obstacles to Pairing 6:20: Three Mistakes in Pairing 4:39: Worst-Case Scenario
@abarusso3 жыл бұрын
Woah. That actually did help! Thanks to you and Brody's F2L flowchart, I've been able to solve it like 4 or 5 times today for the first time. Thank you.
@lane1244 жыл бұрын
very helpful! took some time to switch from beginners method to f2l but after practice and determination, i can finally use f2l to start solving my cubes. thank you!
@Yettii5 жыл бұрын
welp, I can't seem to get it. It feels like I've watched every tutorial for F2L on KZbin, it's crazy confusing for me, I'm not going to stop trying but geez I thought it would be easier.
@ChrisBandyJazz5 жыл бұрын
What exactly are you having trouble with? Like what part in this video do I say something and you think, "I don't understand that"?
@Namuundoesstuff5 жыл бұрын
Try J perm
@Yettii5 жыл бұрын
Chris Bandy it’s mainly most of the cases and algorithms.
@nichoIas_5 жыл бұрын
@@Yettii watch J Perms videod
@Yettii5 жыл бұрын
Nicholas Yeo I tried
@Svartr.HrafnSvartr6 жыл бұрын
Thanks for sharing! I'm trying to transition from Beginner's LBL to CFOP and other videos literally had me in tears from frustration; this vid really helped get some of the concepts clicking for me!
@rajlekhabhattacharyya91106 жыл бұрын
Svartr I don't know why but I burst out laughing while reading your "....literally had me in tears..." Line, perhaps it was because the same thing happened to me! Haha, Chris is a legend lol
@berniexs15004 жыл бұрын
Hello, Thanks for the video, But I am in the need of help. After making 3 of the 4 slots solved, I cannot complete another slot. I watched until the end but It says to always use a slot that is unsolved. But when I have 3 out of 4 solved there is no slot that isnt, as the other side of the unsolved slot will move when I use the unsolved slot. Please help. Thanks. ❤️
@nubgregory90347 жыл бұрын
I subscribed and liked the vid because you're the only one I understand about this F2L thing.Thank you so much keep up the great work
@ChrisBandyJazz7 жыл бұрын
Wow, I appreciate it man!!
@ricepatch6 жыл бұрын
So many double pairs broken in this video... Gives me shivers. Nice tutorial though, great for beginners.
@ChrisBandyJazz6 жыл бұрын
James Yang Lol ikr! Ppl gotta start somewhere tho
@manujolicoeur74992 жыл бұрын
Just started to learn f2l and from all of the tutorials that i've watched, this is the only one that I could understand clearly. Best f2l tuto on youtube ✋️
@SilliestBillyz2 жыл бұрын
agreed
@jeffbezos99443 жыл бұрын
This. Was. AMAZING!!! The steps were explained clearly and words like cross, open, and close were substituted for that “R-Prime” and “L-Prime” foolishness. Thank you, this video helped me reduce my solve time from 1:55 to 36 seconds!!!
@ChrisBandyJazz3 жыл бұрын
Awesome!!
@justsomeguy8923 жыл бұрын
If you're gonna get fast, you need to learn that "R prime L prime foolishness". That's called notation, and it's necessary for learning algorithms. Otherwise it'll be like learning guitar from someone telling you "put your first finger on the 3rd fret, your second finger on the 5th fret..(etc)...Congrats, now you know one note, 57 more to go!"
@jeffbezos99443 жыл бұрын
@@justsomeguy892 dude it was just a comment to show my appreciation for the video
@justsomeguy8923 жыл бұрын
@@jeffbezos9944 ok
@Kenjy1x4 жыл бұрын
This is the best f2l tutorial ever!!! All of the other tutorials r either to hars or to slow... this is perfect
@johanneslioddens99674 жыл бұрын
It isn't the fast way he showed the slow way
@johanneslioddens99674 жыл бұрын
It isn't the fast way he showed the slow way
@yadagiritelukuntla77594 жыл бұрын
nobody: me:watches inn 0.75 speed and is still confused
@akshatuniyal83696 жыл бұрын
Surely the best f2l tutorial available on youtube,everything described to the smallest detail.Keep up the good work bro.
@ChrisBandyJazz6 жыл бұрын
Akshat Uniyal Thank you so much!
@greygods98245 жыл бұрын
3:21 Corner or Edge not on top 3:44 Corner is white on top 4:03 Corner and edge not same color on top
@jinx19965 жыл бұрын
@IV BADSPORT VI5 lol
@spotakissexperience84087 жыл бұрын
you were the only person that helped me fine the 3rd layer
@ChrisBandyJazz7 жыл бұрын
Awesome I'm glad it helped!
@dimitrioskarampinis87753 жыл бұрын
''You are failing to think in all 3 dimentions'' XD
@MaddyM285 жыл бұрын
You are the best! I have watched MANY F2L videos, but could never understand them and I would usually end up quitting. This video is easy to understand and there are time stamps in the description that are very helpful. I finally did F2L and with a little more practice, I'll be a pro at this! Thank you so much!
@ChrisBandyJazz6 жыл бұрын
Planning to do a tutorial on Pyraminx, 3x3x2, and 2x2x3. That sound good to you guys? I could also do X-Cube, Mixup Cube, or Cubic 3x3x5 if you guys are interested-let me know!
@shedrickwilliams70496 жыл бұрын
Chris Bandy When i Insert and pair over and over again the lauers never solve. Im so confused right now lol. What am i doing wrong!!??
@sobiakashif23556 жыл бұрын
Everything but the pyraminx
@fullofgaming24765 жыл бұрын
Please do a 2x2x3 that will help me a lot
@ezra80015 жыл бұрын
thanks so much, I finally learned how to do f2l, I have been trying for weeks
@AvtarSingh-fv4fd5 жыл бұрын
Mixup
@rockcap68214 жыл бұрын
How to insert: 3:07 1st Obstacle: 3:20 2nd Obstacle: 3:44 3rd Obstacle: 4:05
@yousefmaher82062 жыл бұрын
You explain it so much better than any other video I've seen, thank you
@detard68083 жыл бұрын
2:38 One Step to Pairing 3:18 Three Obstacles to Pairing 6:20 Three Mistakes in Pairing 4:39 Worst-Case Scenario
@tperm42653 жыл бұрын
Thanks
@nitfitnit4 жыл бұрын
I've watched a few F2L for beginners videos, this is the easiest to understand.
@bucketson_rblx44315 жыл бұрын
Dude thank you so much its more simple and detailed unlike other tutorials
@Eszentric6 жыл бұрын
Chris, thank you for this very helpful tutorial. I like how you go back and break down what is going on in the algorithm, explaining step-by-step how, and why it worked. I also want to say that the quality of the video was excellent, and your voice was very clear, and understandable... quite professional!
@ChrisBandyJazz6 жыл бұрын
Robert Eszlinger Wow, thank you so much! My favorite comment!
@shamil66874 жыл бұрын
I managed to solve the three laterals but everytime i want to solve another, another one is broken
@billymcdoodles4555 жыл бұрын
Fantastic! Took me two days to learn the beginners way. Learned this in two hours!
@caelanvaneijnsbergen50574 жыл бұрын
jesus christ this solves every problem I had in 8 minutes
@oppaio4 жыл бұрын
Me too! I've been struggling for 2 days with F2L and I did it for the first time when I watched this video.
@mattheq99302 жыл бұрын
keep in mind this is still really slow and this is still beginner method
@mattheq99302 жыл бұрын
@@oppaio this isnt F2L this is still beginner method
@DemianLara5 жыл бұрын
Best step-by-step so far, thank you very much
@ifbrtap30215 жыл бұрын
I can’t do it bro it’s to confusing😡😒😔😫
@bensnow77215 жыл бұрын
Learn beginners method first and it may make it easier
@LeeMatias4 жыл бұрын
Fr I could listen to this guy speak all day 😂
@gold2g264 жыл бұрын
Instructions not clear I ate my orange middle piece
@bzeast4 жыл бұрын
Sniper Agario why the orange one
@yakovhadash4 жыл бұрын
Vitamin C
@SilliestBillyz2 жыл бұрын
i’m saving this and sending it to anyone who wants to learn f2l thank you
@susybaka99322 жыл бұрын
this was the first time I did every f2l pair correctly 😀😊 really love it love it tbh the other tutorials were really damn complicated you made it look so easy 😊 tysm!!! ❤️❤️ Edit - You've earned a Sub 😊
@marcusnielsen74996 жыл бұрын
The only video that maked sence. Great work with the video. I’ve been searching for a couple of days and then i found this video. Im not kidding but i watched this video 3 before i almost could do i like that. Thanks a lot
@Apoc2204 жыл бұрын
This video is great.!Took me a few watches but it totally makes sense! Now just a matter of practicing. I've made some timestamps for myself and hopefully this will help others. Intro 2:38 - One Step to Pairing Three Obstacles to Pairing 3:20 - Either corner or edge not on top 3:43 - Corner white on top 4:04 - Edge flipped wrong Demo 4:39 - Demo with Three Obstacles ("Worst-Case Scenarios") Three Mistakes in Pairing 6:24 - Edge on wrong side of corner 6:55 - Edge pushed into middle layer 7:22 - Un-solving pairs accidentally (slots explained)
@humongousfrog11583 жыл бұрын
I can’t do this.I HAVE TRIED DOZENS UPON DOZENS OF THESE STUPID TUTORIALS AND I HAVENT MADE ANY PROGRESS AT ALL! I JUST WANT TO BE A BIT FASTER! IS THAT TO MUCH TO ASK MY TINY BRAIN WHO ALL MY FRIENDS AND FAMILY SAY IS MASSIVE WHEN CLEARLY MY BRAIN JUST ISNT .
@perisanti75713 жыл бұрын
He start with a half solve cube like wtf. I take it I don't make a daisy a just want to solve a rubix cube quickly I'm willing to put in the time but no video make sense to me I just cry😓
I can do beginners method in 2 minutes average...trying to do cfop takes me about a half an hour. I've watched at least 5 different tuts on it. wtf?
@ChrisBandyJazz3 жыл бұрын
When you first learn F2L, it will be slower, but then eventually it will be faster than you can ever get on beginners method.
@ChrisBandyJazz3 жыл бұрын
Remember that this is only the very basics of F2L; watch my other two videos once you are ready to go more in depth.
@steelyfan77453 жыл бұрын
thank you for your videos man. I will keep trying
@bruh-xr2sl4 жыл бұрын
Sorry for that, you pointed me in the right direction and i found a different way how to get a pair thanks for the tutorial! I would recommend to watch this around 3-5 times to fully understand the obstacles and movements.
@harish25643 жыл бұрын
its a good starter to f2l and the comments are aweful
@lucario89002 жыл бұрын
2:42 start 3:20 corner or edge is not on top 3:43 white on top 4:04 together but one is flipped problems: 6:25 the tops are right but the sides aren't in a pair 7:24 when u solve one pair, another gets ruined
@SilliestBillyz2 жыл бұрын
thanks this helped alot
@SilliestBillyz2 жыл бұрын
you don’t understand this saved me so much time
@rockcap68214 жыл бұрын
I was searching for a very long time to find someone who could explain it decent, and you did the best. Thanks!
@flatgoods95644 жыл бұрын
This video explains F2L perfectly. I have watched so many videos and read many tutorials and it just frustrated me, thought I'd never understand it. Watched this video and the penny dropped - I can now do F2L! Thanks Chris, great video! EDIT: typo
@ChrisBandyJazz4 жыл бұрын
Sweet, thanks so much! I'm glad it helped!
@chasenw93264 жыл бұрын
Make a vid about it
@ChrisBandyJazz4 жыл бұрын
@@chasenw9326 About what?
@chasenw93264 жыл бұрын
Chris Bandy the penny dropping lol
@ChrisBandyJazz4 жыл бұрын
@@chasenw9326 Lol got it
@k3nnxd1972 жыл бұрын
Notes for myself How to insert: 3:09 Obstacle 3- Edge and corner won’t match. 4:06 Mistake 1: 6:25
@menidellaloisruthf.66214 жыл бұрын
This is honestly the only video that helped me understand f2l and I'm pretty dumb honestly
@johanneslioddens99674 жыл бұрын
But that is not the fast way
@tuwtel6 жыл бұрын
Im scrolling through the comments and this guy is a legend and also a savage when responding to people
@tornadoSPEEN4 жыл бұрын
Thank you, this is the first time i actually got it
@ChrisBandyJazz4 жыл бұрын
Awesome!
@johanneslioddens99674 жыл бұрын
But it is not the fast way
@ChrisBandyJazz4 жыл бұрын
@@johanneslioddens9967 Right, it's for people starting out with F2L
@johanneslioddens99674 жыл бұрын
@@ChrisBandyJazz it is not F2L
@ChrisBandyJazz4 жыл бұрын
@@johanneslioddens9967 Yes it is, watch the whole video.
@fraser26363 жыл бұрын
3:11 (for myself I can’t remember the algorithm for some reason)
@vecolityplayz54476 жыл бұрын
lol this is actually real in the beginning he just shows what beginners do but he actually shows how to do it thanks man
@ChrisBandyJazz6 жыл бұрын
Thank you man! haha ugh so many people don't watch all the way
@vecolityplayz54476 жыл бұрын
Chris Bandy ikr
@maximnegara38756 жыл бұрын
Great video tutorial , sadly i learned the method thsts much slower and ineficient but anyways this helped me understand from first try how f2l works 👍👍
@DinLokaleStalker4 жыл бұрын
Thank you god! For so long i wanted to learn the f2l and finally, this channel showed up!💪
@gordontuioti-mariner24365 жыл бұрын
2:38 One Step to Pairing 3:18 Three Obstacles to Pairing 6:20 Three Mistakes in Pairing 4:39 Worst-Case Scenario
@johnrowsell23626 жыл бұрын
this is wrong, this isnt f2l, this is the beginners method for getting the middle layer, f2l is when you get the first 2 layers at the same time, this is not that, this is showing you how to get two different layers at two different times, which is much slower, if you're looking for true f2l, dont watch this video
@ojsojs60045 жыл бұрын
Watch the whole video. This is f2l.
@heidiziglar47956 жыл бұрын
THANK YOU SOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO *takes a deep breath,and i mean REALLY deep* OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO MUCH!!1
@obviouslymatt64525 жыл бұрын
I learnt to f2l a few days ago and you overcomplicate this.
@INF-pj5wp5 жыл бұрын
You're right
@chiefsed44735 жыл бұрын
Constantinople, 1054 where did you learned it?
@SkepticalKookaboora Жыл бұрын
You're a Giga chad
@vhinoo5 жыл бұрын
Perfect vid: good camera good lighting good audio and good cube with good shades
@caseohsbellyy6 жыл бұрын
Thats beginners method
@bunnybeetle1304 Жыл бұрын
even if you coded this into my head i’d never understand it. i hate how dumb i am. i’ll forever be stuck at 3 mins.
@razvancotoi4526 Жыл бұрын
I get it man, i thought so too, rn im trying to learn cfop because so far i only know the begginers method and i want to get faster but it seems like i have the same time regardless :( dont give up tho, practice eventually makes perfect, just needs time
@MilesClancy Жыл бұрын
Yeah it does I recommend watching the beginner video
@nabranestwistypuzzler7019 Жыл бұрын
You can easily get sub 1 minute with beginner’s method. Also, learn from TheSergsB ans J Perm
@SMFR-Eye4 жыл бұрын
This is for myself: 5:04 4:40 5:13 5:47 6:43
@stevenli475 жыл бұрын
If you wanna learn f2l just watch j perm much easier
@deepasandeep40645 жыл бұрын
Exactly
@Nick-xt3yp5 жыл бұрын
Steven Li I watched it and it doesn’t work
@Nick-xt3yp5 жыл бұрын
Steven Li This tutorial is better
@JH-kj5zu3 жыл бұрын
It normally takes me 1 min to do the beginners method. But not with f2l it takes me 30 min. Thanks!!
@frostyguys11555 жыл бұрын
Chris, nice video. Do another one about oll and pll, please
@giggle30355 жыл бұрын
if you dont want to learn full oll and pll use these: ukcubestore.com/2-look-oll.html www.cubewhiz.com/2lookpll.php
@diptipanat7937 жыл бұрын
You can do this algorithm also Right: (U R U R’ U’) y (L’ U’ L U) Left: (U’ L’ U’ L U) y’ (R U R’ U’)
@koparaperera87517 жыл бұрын
This video is probably so far the best video that explains f2l clearly. This is really easy to understand
@ChrisBandyJazz7 жыл бұрын
Kopara Perera wow thank you!
@yagnoel4 жыл бұрын
Hey I have a problem.. When I do the pairs and insert them, other Pairs that I have already solved just get scrambled again. So you could technically do the edges infinite times.. I dont know what I'm doing wrong
@ChrisBandyJazz4 жыл бұрын
Watch the whole video-I explain that at the end
@er.you25944 жыл бұрын
.
@oscarwalls37704 жыл бұрын
its confusing tho i dont understand it
@ChrisBandyJazz4 жыл бұрын
@@oscarwalls3770 Every time you're about to twist one of the sides up or down, look and see-did that twist move one of my completed pairs? If yes, then go back (twist that side back to what it was). Adjust the lower two layers of the cube at the same time (i.e. a d-move) and try again. If no, then you're good to go. The point is to only do moves that don't disrupt the pairs you've already completed. There will always be an empty slot you can use.
@dwightschrute21124 жыл бұрын
What do you do when you are down to your last pair and you can't move them around? great video by the way
@MrMouthBeats4 жыл бұрын
This is a beginner's f2l, i know because i use the same method. You actually have to take the time to look and process and execute the moves and sometimes all blocks could have the color yellow. And the only way to remove the yellow is when you do a random ''Lateral Algorithm''. It's still a good method though but i wouldn't recommend it. Nice video tho! :)
@ChrisBandyJazz4 жыл бұрын
No this is F2L. It is an introduction but it is true F2L. Once people learn it they should watch my next 2 videos in the series to get more advanced concepts and algs
@MrMouthBeats4 жыл бұрын
@@ChrisBandyJazz Oh ok, thank you for making me understand/explaining it properly. I'll make sure to watch your next 2 videos to be more advanced in it. Keep up the good work buddy. #PositiveVibes
@spindoctor63854 жыл бұрын
When you come to do the last F2L pair, can you show how that works as you have no "open slot" to work with..
@spindoctor63854 жыл бұрын
Ah never mind... i was not orienting the pieces properly.. The last pair has very limited options though, So far i have added about 20 seconds to my 2 minute average just using total beginner layer by layer method.. The hardest bit is the recognition, I will keep practising.
@ChrisBandyJazz4 жыл бұрын
@@spindoctor6385 Keep up the good work! It is a learning experience! Most people start F2L when they're averaging 40-60 seconds. But if you can do it now, go for it! If you keep practicing, I'm almost certain you'll eventually get way faster than you ever could with LBL
@s.govindaraju3322 жыл бұрын
I don't why others did not like this tutorial But it very easy to learn and to educate and it helped me a lot
@jaybo1973062 жыл бұрын
.. Reporting back. So after just an hour or so, I am getting more fluent with this. I'm probably doing all those 40 odd algorithms without actually having to learn them. Thanks for making this so much easier 👍
@kel16605 жыл бұрын
Just call it a edge not a lateral it just confused me
@texark.7 жыл бұрын
"Because you're failing to think in all three dimensions" LMAO
@ChrisBandyJazz7 жыл бұрын
Blubbery Blue lol flat-thinkers aren’t so good at rubik’s cubes. Easy fix tho
@slowbruhh25876 жыл бұрын
Blubbery Blue LMAO he said that right when I read this comment
@68plus1.5 жыл бұрын
Whenever he said f2l is a list of 40 algorithims, I became like "NOPE NOPE NOT TODAY"😂
@ChrisBandyJazz5 жыл бұрын
Junky Tornado Haha you can solve it completely intuitively! but if you want to go the algorithm route you just memorize 40
@68plus1.5 жыл бұрын
@@ChrisBandyJazz ok
@68plus1.5 жыл бұрын
@@ChrisBandyJazz but intuitively??? how???!?!
@ChrisBandyJazz5 жыл бұрын
Junky Tornado have you watched this video? Have you watched the essentials video?
@68plus1.5 жыл бұрын
@@ChrisBandyJazz i dont understand anything you say there :(
@guitarbeaver98196 жыл бұрын
My ol brain has to watch these videos over n over lol. In the end it will all come together. Great vids thanks for taking the time
@xxlillshwerpyxx63935 жыл бұрын
You do know that F2L is solving the first two layers at the same time?
@ChrisBandyJazz5 жыл бұрын
That's correct!
@simi.n4 жыл бұрын
I know im so late to the video but how is it that most people dont get the instructions. It is so simple and he speaks so softly. Thank u so much for the tutorial it helped me alot.
@Chris-ij5fj5 жыл бұрын
i cant find any video that can explain easily how to do f2l
@funkman985 жыл бұрын
BEAST_pRo because it isn’t easy, it’s the hardest thing to learn, as you need a lot of intuition
@fronz13585 жыл бұрын
BEAST_pRo Go to Z3Cubings video that the title is "How to solve a rubiks cube (v3)". It's the best tutorial that taught me how to solve it and how to do F2L
@dravenkill6 жыл бұрын
its like you were listening to my ranting when i tried f2l for the first time last night. most of my questions are here. thanks alot
@elijahstroebel5 жыл бұрын
Thank you Soooo much after this my times went up by at least 10 sec within the first day! You are my hero keep making awesome videos like this one! 😆 👍
@edwardhsing41955 жыл бұрын
How every vid I have seen on f2l I do not understand how plz how
@blackpink48055 жыл бұрын
Ive been practicing f2l in 2 months but still doesnt understand
@gabrieljitaru55375 жыл бұрын
I suggest watching J Perms f2l tutorial.It is only 8 minutes long and it is pretty useful.Also don’t get scared if you are slower with f2l rather than corners and then edges at first.With practice,your times will become much better :)
@arundhatikar87624 жыл бұрын
Thanks a lot bro you helped me a lot keep it up
@ibraheemayub38944 жыл бұрын
I have a problem that sometimes I have a pair but the in the opposite way, so If do the insertion as example I will de orange pair on the Blue side and the Blue pair on the orange site. How do I fix this?
@paulstratigouleas72584 жыл бұрын
Same
@justsomeguy8923 жыл бұрын
This comment section is such a mess lol.
@Bam-uw1ek5 жыл бұрын
When I move the edge it messes up one of my corners
@yinkysubwee85505 жыл бұрын
cube must be twisted
@rik3nbaa1794 жыл бұрын
like i know how to do the f2l but its always the fricken last peice it just never seems to go where it needs to go i dont know whyyy its so hard
@itzsomebody7544 жыл бұрын
E to
@gabeyoshimuravr39884 жыл бұрын
Thanks man, this was very easy to follow
@noetrix33124 жыл бұрын
Nice! Better than other tutorials out there.
@scroojalix5 жыл бұрын
Question, how do you apply f2l if three of the slots are solved, and the last pair are not aligned?
@user-zr7wc8wg4c5 жыл бұрын
use the last slot where the pair will go
@artyads13665 жыл бұрын
Put pair together when over the slot
@anabsoluteg97932 жыл бұрын
When u hide the corner twist the face on the top then put the corner back up an f2l pair in a slot gets removed
@ChrisBandyJazz6 жыл бұрын
My bruddas, let us spit on dem who say, “this is beginner’s method.” Dey do not know de wey. Read the description! Who wants a 5x5x5 tutorial? 50 likes and I'll make it!
@valal96306 жыл бұрын
Chris Bandy i
@mynameisnotcarlo13586 жыл бұрын
This is beginners method...
@ChrisBandyJazz6 жыл бұрын
Virginia Rosario Oh really?
@scottsterz41436 жыл бұрын
Chris Bandy please do
@emilflognoid15326 жыл бұрын
If you have three edges done, how do you do the 4th without messing up the rest?.... nevermind, i fogured it out... just dont start with the white over your open corner... start over a solved corner...