How To Make Pie Cuts | Quick & Easy Method - Stainless Steel Pie Cuts For Exhaust Fabrication

[@scotydog7868]

Finally someone explaining it nice and simple thank you sir 👌🏻👌🏻👌🏻

[@kieranoconnell5428]

Nice and easy to follow! Nice work!

[@FabCoUK]

Thanks Kieran!

[@tomscustomshop]

I’ve made a few pies but still learnt more of that vid ace

[@FabCoUK]

Glad it helped. Thanks for watching!

[@tom4szek]

Easy, simple guide! Thanks!

[@kurttoot]

Awesome video, easy to follow, I used a finger linisher to clean my inside burr

[@chrisrundlett3707]

Sweet! Just exactly what I was looking for!!!

[@artisarium]

Notice how he changed from imperial to metric to achieve better precision.

[@tigermoloney3619]

Great video well explained

[@mopedmarathon]

You can use a length of angle iron to mark a straight line down a tube. Just lay the open side of the angle along the tube. It self centres because it sits on the 2 outer edges of the angle. Then align the edge of the angle with your centre line from using the tape.

[@FabCoUK]

Yeah that works well, assuming you have a good straight piece of angle kicking about that’s not been used as a pry bar!🤣

[@chrissantos7865]

He mentioned that in the video if you watch it

[@dimestackwelding607]

dont you want to keep that first piece, as a transition from straight tube to pie cuts?

[@matthewjones7689]

Anyone know what kind of bandsaw he's using?

[@FabCoUK]

Baileigh BS-210

[@kungfuclutch2788]

Best vid on this by far

[@wengperez2643]

I love it

[@TonySopeano46]

Easier way to get the center line is use a piece of material that puts the sharpie at exactly 1/2 of the width of the pipe and just move all along the pipe.

[@malakiblunt]

A square will only work if the tube is cut square

[@calebc6028]

first straight to it.

[@АлександрКадеев-щ6ю]

Very easy work like that, when you have tools. I wanna see, how do that, if you have only angle grinder.

[@KrisKustomPaint]

Using a square assumes that your end cut is square. Angle iron works better for this.

[@BobbyBrown11]

Is the icengineworks for sale yet?

[@FabCoUK]

Very soon, just sorting out the last few bits of paperwork!

[@BobbyBrown11]

@@FabCoUK happy days dude

[@BobbyBrown11]

Out of stock already Gutted

[@FabCoUK]

@@BobbyBrown11 Plenty of pie cuts in stock. : )

[@Magoot2456]

Ok, i have the sharpie and masking tape...now i just need the $10,000 bandsaw :)

[@Kozak450]

cały film jak cuąć rure a na konieć ita kchj z tego

[@treeman5590]

some would say its as easy as pie. Ill see myself out.

[@ebrahimseedat5554]

Yeah... quick and easy if you have an expensive bandsaw that can be set to any precise angle 🤦

[@therealq10]

I’m doing basically the same thing with a $50 portaband used in the harbor freight $100 stand (that I got on sale for 25% off). That’s a lame excuse.

[@camerondamon293]

Or just use a rotary cut off wheel

[@iriandiaz5615]

Or a hacksaw

[@braappaholic]

Chop saw works too it just eats more material unless you have a special metal blade

[@sailshane]

At 0:54 he waves to Joe Biden.

[@runifuceeme406]

TOO MUCH WORK.. GONNA BUY A MACHINE THAT DOES ALL THAT FOR ME..

[@luismonroy9398]

Too much math 🙉