Flashing English ROM on Amazfit Verge, Stratos or Pace

[@Anonymous-iq5fr]

Hello can you please tell me how to flash English rom contains Alexa for pace

[@TechMishka]

Better check XDA's forums for updated turotials on this.

[@satakhunleethanasarn832]

Just got the 2nd hand from the market, it's a Chinese version though. Found this video and helped me out of misery. Thank you so much. It works like charm.

[@TechMishka]

Glad I could help! The Chinese version seems to be with identical hardware, so enjoy now the functions of the international software.

[@venukrithish007]

My verge is stuck on QR code menu. I've tried flashing the global rom and also formatting cache, data and internal. I don't know what I'm missing. Even after pairing the watch shows the QR menu and only that

[@jasontan6182]

Thanks bro! I have successfully flash an international rom on my CN version Stratos 2

[@TechMishka]

😎👍

[@fitnesscat761]

I am little bit confused that when the verge was in fastboot it was saying that waiting for device . So I have to wait for 5 min and then the (finished ) will come . Please tell me I am confused

[@TechMishka]

It;s been a long time ago when I did this... SO hard to remember how exactly it went.

[@AmirJaharimuzik]

I only have imac, how can i flash my verge on mac? Thanks!

[@TechMishka]

Not sure about the exact workflow - but you should start by installing adb on the iMac.

[@ReynaldiYusufKurniawan]

pro youtuber explaining tutorial video, thanks man

[@TechMishka]

Reynaldiyk - and thank you for stopping by to say a good word! 👍👍

[@centralbalatarza4906]

Hello, I think I accidentally deleted the system file while using the tool all in one program. My Amazfit verge watch stays where the balls are spinning on the splash screen. How can I fix this error?

[@MohammedElshafeixXx]

That's awesome and brilliant 👍🏻😍

[@TechMishka]

Thank you so much 😀

[@youtubedochris]

Buddy, thank you so much for your video. My verge watch is having a software issue where the seconds are not being displayed. Do you believe erasing cache might solve the problem? How do I get to fastboot erase cache? Once again, thank you so much!

[@TechMishka]

Hi Christian - most likely erasing cache would help, yes. But much easier is to try a factory reset - it may help too. As for the cache erasing procedure - refer to the xda-thread, it has each of these commands shown line by line.

[@JefreyDrummer]

Hi Tech4All, How about sa Stratos? because this is only for Verge

[@TechMishka]

You better follow this guide - kzbin.info/www/bejne/mWGsiI2AqLWVoZo and take the correstponding international ROM for Stratos.

[@NirHason]

Thanks for the video! The XDA thread says it's not for PACE or STRATOS and since I'm having the Pace (CN version) with OS 2.4 I'm wondering which OS version should I use and what steps. I hope you can help with that :)

[@TechMishka]

Sure - just find in XDA the suitable threads for PACE and Stratos and get the ROM from these threads; Each model has dedicated forum thread.

[@carlosbezerracarlos]

Then if you follow all the directions in the video, when the system boots, the device hangs in "launching apps" and I have to turn it off and on again, but nothing happens. It hangs right at startup. What did I do wrong or does the equipment have a problem?

[@TechMishka]

Sounds like you got the wrong download package; Better check the thread on xda developers forums carefully.

[@220pulsur]

I installed as you described on my Amazfit Stratos but now screen dosent show anything & my watch name changed to amzfit verge , please tell me what to do now?

[@TechMishka]

Hi Suraj - as mentioned in the video - you have to find the corresponding for your watch ROM. There are differences between the Verge and Stratos - make sure to find the Stratos thread and to download the Stratos ROM.

[@juangschirmer]

I'm on a bit of a problem. The Watch, Amazfit Verge stopped in the fastboot screen and I can't go foward to the next step that is charging the new room. The watch isn't being recognized by the pc. I have downloaded the drivers and connnected and restarted the PC. Do you know what I can do? Thanks!! Sorry but I did on a coworker watch and I don't want to break the bad news

[@TechMishka]

Most likely it is not too bad; Perhaps it is the fastboot driver not working. Try to execure the commands one by one manually - start from where it stopped.

[@feliphefc]

Hey. I have the same problem. Could you fix your watch?

[@feliphefc]

@@TechMishka , when I execute the command "adb.exe -d shell reboot bootloader" it returns an erro message: error: device not found. What should I do?

[@vikramprajapatii]

I'm having same problem, what did u do sir ?

[@juangschirmer]

@@vikramprajapatii i can't remember but I fixed it, sorry!

[@AliHassan-gd8qh]

At the flashing step ...when i run the flash_us it dosen't start and the only word displays "press any key to continue" .

[@TechMishka]

This sounds like good - did you press any key? That should start the procedure. There also is a totally manual flashing option, also described in the XDA thread.

[@zelintan1754]

Any idea how to get Verge Lite A1808 to be discoverable by PC? Amazfit Support told me it doesn’t have the ability to connect to PC

[@TechMishka]

The Lite doesn't have that option - it is only possible with the non-lite edition.

[@zelintan1754]

Tech4All isnt A1808 verge lite? Someone previously mentioned in the comment it works, or is A1808 and verge lite different products?

[@salmanmajeed1788]

i installed drivers and try to bet info about bootloader by using app,app freezes .and i also tried to use command prompt method,its doesnt recognize adb cervices.please help me out

[@TechMishka]

Sounds like a driver problem. Try another system.

[@salmanmajeed1788]

@@TechMishka Thanks for tip.it was actually a driver problem.i installed older version of adb installer and got it fixed. now i am enjoying International english Rom on my Amazfit Stratos. bundle of thanks.

[@josephchristiancalibuso8452]

please try it in a amazfit GTR chinese version.. Thank you

[@TechMishka]

Different os... It won't work.

[@Boszriyu]

Waiting for gtr English rom🥺

[@albertcabreira4220]

After I put the serial number and OS Version and I click the Check button, the watch goes to the Fastboot screen and the Bootloader Unlocker starts to hang. Ive clicked Yes and No and both resulted in the same thing. Kindly advise.

[@TechMishka]

Better check XDA's threads about it.

[@joechan2259]

Just bought a second hand verge. Is it impossible to unlock the bootloader now?

[@TechMishka]

Hm, I don't know. Should be possible.

[@vikramprajapatii]

Have u tried it sir ?

[@mrsame3686]

my amazfit pace stuck at fastboot mode on watch And waiting for any devices on pc , what should i do for this fucking situation??? HELP ME 😩😩😩

[@TechMishka]

better check XDA developers forums. Usually this means that on the PC the drivers are missing.

[@mrsame3686]

@@TechMishka I installed every single one of the damn drivers even manually , but didn't work , its stuck at "fastboot mode" on the watch and "waiting for devices" on the pc

[@josielmoraes8459]

I can't go into boot mode, I only managed once via the button. It's amazon Verge

[@TechMishka]

Check on XDA for possible workarounds.

[@tim_yrt]

I'm having invalid serial number prompt when requesting code, can someone give me some tips please?

[@TechMishka]

Often the message refers to the serial number, but is actually because of the ROM version. Make sure to enter a version from the Amazfit roms - I remember the algorithm was not accepting versions for the Verge when was trying that.

[@dakelei]

The XDA developer page is absurdly complicated. There are so many buttons I can't figure out WTF to do.

[@TechMishka]

Yeah - that's the nature of flashing... requires patience and lots of reading, and lots of trying 😕

[@dakelei]

@@TechMishka I'm not doing this for fun or because I'm particularly interested in learning the intricacies of "flashing." I'n an American living in China and bought the watch from Taobao when my Fitbit suddenly died without warning last summer. I had no idea that it couldn't be set to English. It's maddening that the phone app can be set to English but the watch itself cannot. There are quite a few functions of the watch that would be nice to be able to use a bit more easily without having to grope my way through the Chinese. I actually do know quite a bit of Chinese and can read a lot of characters but there are quite a few (perhaps 100,000 or so) that I DON'T know. It doesn't help that my 60 year-old eyes aren't what they used to be and I practically need a pair of binoculars to even read the numbers on the watch. I'm pretty close to getting this but I'm hung up on what the "bootloader number" is. One needs it to completely fill in the information required at the "unlock amazfit" website. I THINK I have the serial number but I'm really not even sure.

[@dakelei]

@@TechMishka The good news is I eventually managed to to make the "flash" thing work but totally bricked the watch in the process. Can't even turn it on. For around 30 seconds it appeared it might work and I was happy but then the watch face went black and that was it. I tried the unbrick thing and that went nowhere as well.

[@samways4231]

I bought a T-Rex direct in China. It was guaranteed to be a Global version. But it is not. I paid more and I have a watch in Chinese. Is there any application for the T-Rex? Please help me. That sad. I was tricked. Thank you very much.

[@TechMishka]

There is no such trick to reflash the ROM, but theoretically - you should be able to switch to English language from within the ZEPP app.

[@samways4231]

@@TechMishka Thanks for the answer! Thanks.... Well, I did the procedure to change the language from the Iphone to Chinese. It updates. However, when I return the iPhone to the English language it gives the bug (update and bla-bla-bla). If I change in Zepp, I have to keep the Iphone in Chinese. Do you have any suggestion? Thank you again. You are very cool. “Um abraço do Brasil”!

[@fatimashahid3589]

YOu deserve a treat ….

[@TechMishka]

Then - may I get one! 😇

[@linus-fn9919]

Its compatible to stratos 3?

[@TechMishka]

Not that I know.

[@alexhat4095]

it is possible to add support for Hebrew ?

[@TechMishka]

Not sure about that, Alex.

[@yalingwu4683]

Has anyone tried to flash Verge A1808 successfully? I can only get this version. Thanks.

[@TechMishka]

Yeah - works alright.

[@aldona6130]

no Mi Home app on english rom?

[@TechMishka]

No, it is removed for the international version.

[@cloudwind9801]

No hiccups what so ever after flashing?

[@TechMishka]

Nope - I have flashed the same way the Amazfit Stratos long time ago and it works without any troubles.

[@cloudwind9801]

@@TechMishka thanks, will try it✌🏻

[@cloudwind9801]

Successful ✌🏻

[@andrearibera84]

It work with chinese t-rex?

[@TechMishka]

I don't think so. The T-Rex runs a different OS as far as I know.

[@sanojmadushanka8011]

can flash my amazfit gtr 47 mm please help me

[@TechMishka]

No, you can't. Different hardware, and very different OS to the Stratos models.

[@sanojmadushanka8011]

my watch has a boot loop problem sir can you help me

[@นทีพัฒน์พัฒนจิตตาพงศ์]

How to know bootloader version

[@TechMishka]

it is shown in fastboot mode; you may use the automated tool linked in the description below the video.

[@Ianbrian]

@@TechMishka I tried the tool in one to get the bootloader version but it keeps crashing while my watch stays in fastboot mode

[@tarragon9964]

It keeps crashing :/

[@TechMishka]

That's bad :( Does factory reset help?

[@donaldtrumpet2716]

my pc cant detect my watch,hmm

[@TechMishka]

Sounds like a driver issue. Or try another USB port.

[@diasgendhis9671]

Ah mumet jonnnn

[@TechMishka]

Yeah.

[@carfanbr]

Mim

[@TechMishka]

Hm?

[@bch1511]

Sorry about this wrong msg.

[@abdul-xo5dx]

I need software for gtr2 ?

[@TechMishka]

You need the smartphone app