Ford Focus Quarter Panel Dent Repair

Check out my playlist for all the other repair videos.
Song
Supersonic
Artist
Rob Gasser
Licensed to KZbin by
AEI (on behalf of NCS); LatinAutor, Featherstone Music (publishing), UNIAO BRASILEIRA DE EDITORAS DE MUSICA - UBEM, LatinAutor - SonyATV, and 1 Music Rights Societies
Song
Let's Go!
Artist
Lensko
Licensed to KZbin by
AEI (on behalf of NCS); Featherstone Music (publishing), ASCAP, and 9 Music Rights Societies
Song: Ship Wrek, Zookeepers & Trauzers - Vessel [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Ship Wrek, Zookeepers ...
Download/Stream: ncs.io/VesselCr

[@beverlyjones3320]

I am 66 years old and you are quite a craftsman. Amazing detailed job!

[@jamesconley6919]

What does age have to do with skill?

[@faithexplorers1]

I hope you take my critique well and know I'm trying to help. The filler should only be used to take out deep scratches and small pinholes, and not to fill up dents. I can guarantee it will crack over time! You need to take out as much of the dent as possible!

[@kevinfigueroa6737]

Bro your tape technique for the body line was insanely useful thank you🙏🏻

[@PA-hb3eh]

Great job I 👍 like.your taping process for making the lines. Awesome thank you

[@kaizenyashin]

Great video could you update the description to include the tools you used? It would be helpful for future viewers

[@drivewithmekhan1144]

Really good finish

[@jumpinjojo]

Nice work, bro!!

[@Ronaldo-dm1bt]

Good job ! 👍

[@cameronhiggins5040]

Great work!

[@ahmadgul9692]

Wonderful job thanks for sharing✊👌😎

[@steveguest8028]

Great repair

[@AZEOforreal]

That is amazing work! I'm trying to do something similar on my 240sx. Danggg

[@coryleeboxing3047]

I really need this done on my car wow great job I’m in the dmv area if you close man great job

[@loveeveryonepeace9081]

That looks good

[@DuperSuperDave]

Good job...I have a nice dent in my Ford Focus SE I plan to fix as well.

[@EduardoHernandez-di8kl]

Great job! I have a 2014 Hyundai Sonata limited the rear ended passenger side fender is cracked I would like to see if you can get it fix but unfortunately I don’t think 🤔 you are close to me I’m in Florida 😒 so I’m going to have get it done here somewhere else… I really like your job seems that you have a lot of work experience and that’s good 👍 keep doing what you doing! Nice video!

[@soulmansaul]

When you did the fender lines, you had the tape over the fender and sanded both down at the same time. It then skips to where it's off and you have a perfect fender line. How did you do that bit?

[@VSMAutoLife]

You just follow the tape you pulled and sand an even amount on both sides. It takes a lot of practice to get that right and even I still struggle with it

[@JSCRILLA253]

Great job man! Liked subscribed 🙌🏽🙌🏽🔥🔥🙏🏽🙏🏽

[@RJC405]

Awesome fix what is the tool that you mentioned you rather have then the harbor freight one?

[@sharongrindstaff6078]

stud welder kit

[@rzzillar90b54]

Good video, you got a new subscriber.

[@jojomars1000]

Love it ❤

[@Luke-rr7ql]

what was the yellow tool at the start that you used to weld the barbs on

[@alexandrealmeida2932]

Bom trabalho de reparo.

[@chicofastpromotion2788]

How much you think would a body shop repair would charge to do that ?

[@ChristopherJones16]

Do you think that HF dent puller gun can pull out a crushed door jamb? Im thinking not but figured I would ask... its probably just for thin sheet metal.

[@VSMAutoLife]

Most likely not, my puller stick eventually went bad, it will weld the studs on but you’ll need something stronger to pull it out

[@balazssitku9161]

Hi, why is the fibre glass filler at the bottom? Is it better to use rather than applying a thick filler???

[@that1993mustang]

You don’t want to use fiber glass filler as your showing filler because it’s not as smooth and won’t show well when painted. The fiber glass in it makes it rough and uneven

[@moecivic5226]

That's good I use to do panel beating before but I forgot what am doing i need help I buyed a frv family car it has a rear panel and rear door damages what grid I need to rub down get the shine off? And please I need ur help thanks

[@VSMAutoLife]

Use 240-320 grit to remove shine for primer, use 80-120 grit to strip paint

[@PsyBee]

keep up the work, i support you with like and subscribe, go get the better tools soon, more power to you bro, i feel the hustle n hards work. i do my own repairs also coz im a car enthusiast, but i also lack tools a lot of times, just soundproofed my car doors.. keep it up!

[@marclaw4511]

That was a nice job.I need to do a less serious repair and hope it turns out half as good.

[@iMakeItHappen96]

Whats size/ brand compressor??

[@oclopez7008]

Great job man! Definitely inspired me to attempt similar repairs.

[@Gribootvod]

How did it go? 😂

[@oclopez7008]

@@Gribootvod still need practice 😂👌

[@kevin-qc7zv]

​@oclopez7008 did it look better than the dent? That's all that matters lol

[@a24z78]

Wow great job man is there a way I can contact you to help guide me with a repair

[@christenason]

Hey bro this really helped and I was thing of doing mine myself can you link to all the parts you used

[@VSMAutoLife]

Of course, I’ll try to add that in, but I want you to just look on amazon! Everything you’ll need will be on amazon or eBay! Also your local Home Depot or auto bodyshop send me a comment for more help !

[@chriskillin29]

Tool list plz

[@smokintires8181]

U need more subs

[@drift_life_357]

Got a sub from me buddy thanks for the info😅 made a oopsie last night with my Z

[@gofishinginternational1865]

Why you did not try hot glue system? it might have worked on your car....

[@taboe4858]

Would have been nice to get a bit more instruction on what grit of paper you were using and the products. I have to do something similar for my old car repair but not many videos actually on KZbin with something this size of a dent and complexity to repair. Nice job though!

[@VSMAutoLife]

Thank you! And yes I can prob make some more instructional in the future, check out a few of my other videos

[@carlosvega8417]

Where are you located? I have the same problem with my corolla.

[@VSMAutoLife]

I don’t do side work, just my own projects

[@jinxjinx2027]

Is it possible to push the dent back out without the machine u used to poke in holes? I have a dent in my quarter panel and I don’t have $1000 to fix

[@VSMAutoLife]

Very unlikely , you can try paint less dent repair but that’s limited

[@dattepo7534]

That spot welder is 100 bucks at harbor freight

[@Luke-rr7ql]

liked subscribed boom

[@moshazza5684]

great job...do you have previous experience of bodywork...looks professional?

[@VSMAutoLife]

I have some! but that can def better but thank you!

[@moshazza5684]

@@VSMAutoLife I thought so...no way am amateur /novice could do that straight away..and not mess up lol

[@kobebettinger1713]

You wanna help me fix my focus? Same problem😅

[@pmm4177]

What you would pay for 2 iPhones or what I'd pay for 2 iPhones? To me iPhones aren't worth but a few bucks

[@VSMAutoLife]

I’m not sure, Lol really random question

[@crukawb5092]

What’s the tool to melt the thing in there called?

[@anunpopularstance]

Stud welder

[@fixx9839]

Hi , what type of filler you use? is it fiber glass filler

[@VSMAutoLife]

Yes both fiberglass reinforced and regular, finish with glaze

[@fixx9839]

@@VSMAutoLife if i used normal filler on dented area about 0.4cm. is it ok or it can crack ? normally how long normal body filler can last before crack? 1 year ? or more if i used fiberglass filler on dented area about 0.4cm it will last longer?

[@hondas6463]

I have the same question can you tell me answers

[@recrdholdr]

Did you seriously just fill in the huge dent at the door jam with filler?

[@wehitthose2208]

Where are you located??? I need your assistance I will pay good money

[@markpratt845]

Damn. Do mine for me. Same car, same color. Serious. Where you at?

[@mechanicalnut7866]

Don’t get me wrong you did a nice job but I think you should of built up the gap on the quarter

[@markwillis5472]

How much of the car did u clear??

[@VSMAutoLife]

The left side exempt fender

[@markwillis5472]

@@VSMAutoLife thanks..✌

[@vladpolsky7940]

Для США наверно нормально такое кол.шпакли ,у нас с толщиномером проверяют, такоe точно не пройдёт

[@aqib2000]

How much did this cost the customer

[@VSMAutoLife]

This was a personal car

[@icarusdb58]

you must be joking 😂😂😂

[@bigbothoee8617]

Spend a bit more time on pulling metal out

[@unclemeat7310]

Great video but the music was annoying to me.

[@devonSKICS]

aint good work dude. 8:50 isnt looking good and waaaaay to many fiberglass. In like 5 years they have to rework it.

[@JDMHaze]

It’s not meant to be perfect, but it looks a lot better than what he started with

[@michelangelohavenga3425]

Better off taking it to a shop instead of repairing it at home and only doing half a job

[@SanthoshKumar-qr2ce]

Very very bad😢

[@Luke-rr7ql]

what was the yellow tool at the start that you used to weld the barbs on