Forscan - How To Back Up Module Data

[@aquaman0167]

Thanks for making this video. Excellent. Exactly what anyone needs to know for a back up.

[@SYDiagnostics]

Glad it was helpful!

[@stmp2757]

Great video dude . no long (bs) intro straight to the point . I’m just starting to use FORScan so I’ll be keeping a look out for you’re videos.👍

[@andrewbeddoes205]

Another great video. i do like your style,straight to the point,instead of watching for hours to get the bit of information you need,thankyou

[@SYDiagnostics]

Thanks, I watch far too many 20-30 min or 45+ minute videos that could be 10 mins max.......i like to be to the point and no BS......this style (forscan) is new to me as i was ad-libbing and trying not to waffle......avoiding putting text in and no powerpoint !! lol (like we spoke about) Cheers for watching

[@paulchester656]

Good stuff Ste, keep them coming, getting more and more interested in this Forscan.

[@dennismoehl6838]

Great instructional video - it covers V2.3x BETA module backup and configuration. FORScan's V 2.3.45 GUI is a little different but does the same thing. Be aware that older adaptors, such as the FORSCAN OBD Monster aren't recommended by and are not fully compatible with FORScan v2.3.45.

[@SYDiagnostics]

Yes it was made a long time ago. I use a genuine vcm2

[@dennismoehl6838]

@@SYDiagnostics Thanks for your great work! Backing up configuration data is such an important and often overlooked procedure (horror stories I've read on FORScan & F-150 forums & Facebook FORScan groups by people who failed to make back-up before changing configurations) that an updated video would be greatly appreciated by us FORScan newbies.

[@SYDiagnostics]

@@dennismoehl6838 I'll look into it for you

[@AbbottAutomotive]

Nice video with very good advice 👍🏻

[@gordon295]

Magic !!! Thank you very much ... :)

[@oleksandrdykyi734]

Thank you for your video

[@jeremymoore62]

Thanks for video. Is the info that you saved, be used for saving data from the ecu and then saved on a replacement ecu (the same part number) ie reprogram.

[@SYDiagnostics]

Yes, correct

[@RogerBrown-ec7bu]

Why do you use Save as opposed to using Write Backup, when using my Forscan I did not see Save

[@raphaelsiqueira547]

Great video Thanks

[@hassenfepher]

maybe i missed it, but will backing up the main module save every setting, or do you need to backup every module, or something else?

[@fastlanetechnologies2512]

I just bought a new cluster same year and model for my car. I’m not worried about changing the mileage but when I plug new cluster in it looks like I will receive some warning lights from what others stated. How do I copy all the info off my old cluster and program onto new one with forscan?

[@tolycobbold7659]

Hi excellent video, I have had to fit a secondhand TCU to a 2013 Kuga, the old one is broken. What’s the best way to code / configure the new (used) one? Using forscan and extended licence. Really hope you can help ❤

[@mrsdoyle2827]

Is this what I need to do before replacing my BCM panel with a new one (Focus Mk2 2010) Thanks.

[@evofix3611]

Helpfull video thanks

[@grc5618]

My truck is currently in Road Kill mode, haha

[@windman1961]

Do you have to do a back up for every module or only the BCMii Central Configuration (Main)?

[@SYDiagnostics]

I'd only back up the configuration of the module you are addressing

[@kamil9337]

Thanks for video. Im trying to resolve P003A fault. Smax 2006 2.0tdci New turbocharger, injectors and still no Power. Might you can help ?

[@DR-xv8ps]

Nice presentation, it's the last one of several I looked at, before felling confident that I had enough information to start. Thanks for your time in doing the video. I have a question if you would like to comment. I am using FORScan V2.3.33 bata that built for Windows. I did a backup of all my modules, 30 modules in a Ford F150, one module at a time for an Inital backup of all my As Built modules. I just noted today, all my file names ended up with a .abt extension and I see yours end with a .cct. Do you have any reason why?

[@markrobitaille3682]

Your tutorials are awesome. Thank you. Now could someone PLEASE tell me how to turn off all the chimes after starting. 2018 Superduty ???

[@sxuldxath9394]

Will this create a viable backup for my system if i were to brick my while trying to update my focus mk3 to 3.5 software?

[@manuelamaya826]

Thanks.

[@Cooldibs]

can you do a "save all" that includes the BCM, APIM, DDM ect? or do you have to save each individually?

[@SYDiagnostics]

As far as I am aware, you can only save each module individually

[@bradvincet1848]

Do you have to backup other modules like powertrain and chassis?

[@djwilson48625]

I wish he said what all MODULES you need to do, or if it was just the one, say that.... I see its been 2 years and still no answer.

[@allynv]

Would you be able to do a video on re-programming an instrument cluster. I've a 2010 mondeo giving bother with clocks and I would fit a 2nd hand set. But not sure of the process on forscan.

[@SYDiagnostics]

Hi. I will look into it for you. If you email me (address in video description) I can talk you through it

[@summerforever6736]

Mickey mouse mode lolol good info sir!!!

[@jeffburger786]

Does there need to be NO DTC in order for you to back up the correct As-built or does it back up data with those DTC malfunctions?

[@SYDiagnostics]

You are backing up configuration data, in case it is lost when you are working on things

[@CK-fn6zs]

What about if I replace the PCM?. And it needs to be programmed into the car. Does Forscan support this procedure? And where can this procedure be found in Forscan?

[@SYDiagnostics]

Anything with a pushbutton start or after 2010 then forscan wont be able to carry the work out. Otherwise its z suck and blow procedure just like backing up data, the carry out module initialisation in the pats

[@CK-fn6zs]

@@SYDiagnostics What If I were to save all my configurations in my current PCM and then replace the PCM with one running different software. Could I load my original saved configurations into the replacement PCM?

[@SYDiagnostics]

@@CK-fn6zs I've done this myself on a 2008 focus. I saved the configuration, fitted a like for like pcm and uploaded the configuration. Then did module initialisation. I didn't change the VIN . But this will only work on anything older than around 2009/10

[@ozon-on4495]

Is that with vid block backup option?

[@labradormcgraw]

Hi. Is it possible to use Forscan to reset a module to factory settings? I have just bought a 2016 Fiesta and two DTCs state an incompatible issue with the settings software. Clearly, someone has changed the settings. Thanks for any advice.

[@muaythai4lifelife]

Hi, I followed your tutorial so to activate the auto locking. I didn't found the BCMii tough, the one where you saved the backup, so I had to try another way. I modified with success the setting, but I didn't have the chance to make the backup firstly. Is it possible to do it again, removing the autolock, making the backup then reabilitate it? Thanks

[@peterellis8207]

What else needs to be or would be wise to back and save.

[@SYDiagnostics]

In my opinion, it's worth doing before changing any coding on a module. Unless you are changing things then it's probably not something you need to do

[@ANDYPEARCY1]

Great video, but from the point at 1:45, when it requires something downloading, do you have a process for this in a bit more detail, or is it really straightforward and cant be done wrong?, sorry for the newbie question, but I'm green on the forscan, thanks

[@SYDiagnostics]

Hi. For this video the download bit is already done.... But it's a straightforward In the background process that is done for you.... Honestly, it's no sweat

[@michaelcorleone8096]

what happens to your vehicle if the operation gets suspended ? Any serious problems ? Thanks for the answer

[@louiemoscatel585]

This procedure backs up all modules included in a vehical in one step?

[@SYDiagnostics]

no, just the one module

[@louiemoscatel585]

@@SYDiagnostics Thank you. Quite a process for your more fancy vehicles.

[@SYDiagnostics]

@@louiemoscatel585 not every module can be modified. It's not something I advocate personally

[@DinamicMediaAs]

Nice 👍

[@khbg12006]

Hi, great video wish i had seen this before i did any alterations, considering your the only person that seems to know a lot about forscan, could you please inform me what code ABS U2101:00-AB control module configuration incompatible, this is stopping my adaptive cruise control from working, is there anything i can do , or will i have to take it to ford, thanks in advance.

[@peterellis8207]

FORScan light on iOS seems to be a different configuration to your pc version. Can you do a back up on iOS or is this only possible on a windows pc. I do realise that iOS does not have the config & programming abilities.

[@simononeill7175]

Do you have a way of programming keys to the mk7 transits with the factory alarm? Ids fails (genuine) as does etis and other key programmers fail to get comms like MVP, smart pro meaning an eeprom to write a key in, wondered if this option would allow you to disable the alarm while you write the key in?

[@SYDiagnostics]

other than the ones ive done with forscan (pre 2009) I always use ids / fdrs without issues......im no expert on eeprom reading / writing

[@viridian6903]

This backup its central coding if the as built data are lost in pcm how can recover or restore to factory configuration?

[@SYDiagnostics]

It can be restored using forscan using the restore factory AB function. Will need to be connected to internet

[@viridian6903]

@@SYDiagnostics if the firmware in ecm or another ecu its different HW does the AB data of motorcraft server can be used or need ecu with the same part number of motorcraft server?

[@tommig910]

Hi, forscan couldn’t download the firmware files from internet, after looking online, this can be done manually from the internet, would you be able to advise please?

[@SYDiagnostics]

probably worth contacting forscan, i am not affiliated with them in any way. I am convinced they have had thousands of new customers through my channel, but never reached out

[@tommig910]

@@SYDiagnostics thanks for the video, got it working perfectly

[@zeltini1401]

Hi. Thanks for video.👍 Where I can download engine file? I can send file guys for chiptunig, and modify file writing back. Thanks

[@SYDiagnostics]

I don't think you can on forscan

[@1235gh]

Lmao yup. This video explains me well

[@CARRJ142]