FPV Drone simulator using Arduino and Flysky Transmitter | Unojoy Joystick | without simulator cable

[@triad01]

EXACTLY WHAT I NEEDED! THANK YOU SO MUCH!!! Edit: I had to check out the rest of the channel and this is easily the most recent underrated channel I've found, please keep doing those cool projects, I'm going to go and binge watch everything here 😁

[@techathome]

Thank you so much, for your support!!!

[@fardeenkhan4092]

The quality of content is so is just amazing Keep posting videos you will be successful soon

[@techathome]

Thanks!!

[@Pokemon45340]

when i calibrate it the stick on the right wont work correctly the i make it to go to the left it doesnt work (it doesnt show any signal) but if left it shows a signal, if i make it go up and down it becomes the right and left in the game, PLEASE HELPPPPPPPPPPPP

[@shreshthsarda5806]

When I run the batch file, I get this error: Could not find AtJniIsp.dll But this file is already in C:\Program Files (x86)\Atmel\Flip 3.4.7\bin . How do I fix this error?

[@athipallimallikarjunareddy9930]

yes even i got the same error please help me how to fix this

[@babymmundadan9224]

bro i have done everything in the video but not responding when i move the joystick stick

[@DEEWAS546]

Dear sir can we connect esp insted of cardino if you could help me with that i we be graceful . hope you will reply

[@techathome]

No , the firmware used support only Arduino UNO board.

[@kirschinger2931]

When I try to open TurnIntoAJoystick I get the error message "could not find a Java virtual machine, cannot continue" from flip and I cannot fix it, what do I do?

[@easyfpv3606]

Very good my friend . Tell me if i want to put joystick convert it from usb to ppm out singnal into my trainer mode radiomaster tx16s

[@akhilab9715]

i followed the same method but during the calibration of the controller the roll is not working

[@babymmundadan9224]

mee too

[@electroscientist4447]

hey I'm usuing radiolink at10 2 and r12ds rx which does not have ppm i want to know how to do it for pwm or sbus

[@techathome]

I have not tried that, is there any other code files other than ppm, inside the given folder??

[@electroscientist4447]

@@techathome no but I write code for pwm and it's works for 6 ch Which is enough for me

[@engaircraft]

atlibusbdfu.dll not found this error appear when i run the TurnIntoAJoystick file .. please help

[@techathome]

Refer this video: kzbin.info/www/bejne/jJWTd2OOfd-Wnrssi=c9C0wdlRuHCQMA5q

[@prashantsoni672]

UnoJoy joystick dissappear from control panel when i turn on the remote , when i turn off , it reappears, what can be the problem ? Thanks in advance

[@prashantsoni672]

i found the problem , i was powering the receiver with arduino , the current wasnt sufficient from my laptop, so i powered the receiver externally and now its working fine . thanks for the content, god bless you

[@techathome]

Thanks for solution, it will be useful for others

[@alokaditya7272]

while running turn into joystick, it shows "operating port failed" a firmware was not found. rest all is pass

[@techathome]

Did you change anything in the file location?

[@alokaditya7272]

@@techathome nope..

[@alokaditya7272]

I just followed the steps as same. But, while running "turn into joystick" two error popup is appearing.

[@techathome]

Can u uninstall Atmel Flip, And reinstall and try

[@yunusemreozcicek6581]

AtLibUsbDfu.dll not found. Brother I have this error. i am not able to run bat file. What should ı do. Can you help me ?

[@techathome]

Here is the Solution video: kzbin.info/www/bejne/jJWTd2OOfd-Wnrs

[@yunusemreozcicek6581]

@@techathome I watched. But still I have same problem. I’m using arduino uno ch340. I want to use simulator with this ardunio.

[@techathome]

You cannot do this because, Ch340 doesn't have option for enabling DFU mode( direct firmware upgrade)

[@E_D_I_T_EFX]

Bro my receiver only 6 output pins how should i connect with that

[@techathome]

Which is the receiver, Can u mention the name.

[@rajathkrishnarhathwar4334]

nice tutorial deepak and deenu anna

[@techathome]

Thanks

[@sk-sohail]

I have flysky ct6b how can i enable ppn output

[@techathome]

That receiver with ct6b doesn't support PPM output

[@yashc7562]

Im using Fly sky ct6b transmitter which does not have ppm so how do i use it?

[@techathome]

For ct6b you will be having simulator cable right. You can use that only.

[@yashc7562]

@@techathome No the cable does not work with ct6b models, that cable is only used for firmware updates.

[@yashc7562]

In the code there is a boolean for ppm I can make that false but i dont know the pin numbers for other channels

[@abhisanthp5779]

@@yashc7562bro how you done this in ct6b

[@zainharabeh121]

bro the folders in the discripion are doucuments. you cant install them

[@techathome]

All links are working fine. I have re-checked.

[@saderuscz]

or just use old mouse cable and audio jack for PPM cable to your mic-in...

[@phantomplays1257]

hey i wanna know if i can do the sxame with a arduino nano

[@techathome]

No not possible

[@ELITEXPERIENCEHUB]

​@@techathomecan I do using a nano shield

[@techathome]

No

[@jaysidhpura]

I have arduino nano, is this the same procedures to connect it

[@techathome]

Arduino nano, you cannot do it

[@jaysidhpura]

Can you please helpe to connect arduino nano to my laptop, thanks you in advance ❤️

[@techathome]

In Arduino nano, this project will not work

[@ais_robotic]

is possible use PWM 6 chanel ? i have no ppm

[@techathome]

No

[@abhisanthp5779]

Bro is this work on ct6b transmitter? Kindly reply me soon

[@techathome]

Check if you have PPM output on the receiver? I don't think CT6B supports PPM mode.

[@newdifferentandgyan5751]

bro can we do this with esp 8266 and ct6b transmitter

[@techathome]

No

[@the_tag]

Thank you for helping me

[@darenarveen2911]

deos this works on a rc car remote as well?

[@techathome]

Can you share model name It should have PPM output on the receiver

[@renukaskitchen8082]

Big like friend ❤❤👍👍🙏🙏

[@bhavdeepsinghkrishnawat8821]

not working for me i am not able to run bat file

[@techathome]

What error are you getting??

[@rehmanazhar6517]

make video to use with esp8266

[@techathome]

Yes sure

[@moneylogyy]

how to do it in mac m1?

[@techathome]

No idea for mac

[@nashikkaashiqui2784]

Which is your operating OS system

[@techathome]

windows 10

[@nashikkaashiqui2784]

Will it work with windows 10/ windows 11

[@techathome]

yes

[@sggamer6309]

Code 1st line not correct

[@techathome]

Which one?

[@sharathkrishnac735]

Great job 👍🔥🔥😍

[@techathome]

Thanks

[@RupendraKumar-l5m]

not getting pass message pls help

[@techathome]

What is the error

[@dandelikakhiladi8452]

Nice info bro

[@techathome]

Thanks brother

[@Dheeraj632]

Bro Arduino code error

[@techathome]

What error u are getting? Full error message can u send

[@EAALLartey-qt1yl]

AtjniIsp.dll error please help..its urgent

[@techathome]

Are you referring to this error: kzbin.info/www/bejne/jJWTd2OOfd-Wnrssi=8zqIIHi0fx7WKB89