Fuel solenoid repair for a Bobcat 863.

[@judeseamus]

Thanks for the video. I was worried about that hook arm fitting right, but it just pops right in.

[@tomjohns3355]

Mine did the same thing.... I realize it' been on here for a while but....thanks for posting this video....this was exactly the problem on mine...!

[@keelsphillips1307]

Do you need to prime fuel lines after installing?

[@Heidenryk]

@@keelsphillips1307 if needed, go for it

[@keelsphillips1307]

10/4 Just curious, I put the new full shut off in and it still won’t run so didn’t know if there’s another easy step I’m missing

[@Heidenryk]

@@keelsphillips1307 the solenoid is pretty simple, if that was the problem it should start, is it getting fuel? Check the screen in your fuel pump, make sure it’s clean. Fuel filter, twist remove water, turn the top screw on filter and pump bulb, remove air from line. If still no start , crack open the injector line and pump bulb, make sure no air in lines.

[@Heidenryk]

@@keelsphillips1307 hope some of my info helps . Good luck

[@wilmeroramas1415]

Mi motor acelera en neutro cuando aplicó la caja no acelera k pasa

[@tarunhuman1244]

What happens if i installed this wrong

[@Heidenryk]

It’s really not that hard to do, why do you believe it’s on wrong? No start? Check the gas filter, maybe plugged

[@treeguyable]

Been running a shoestring on mine for like 10 yrs.

[@danemadsen7358]

So would this also affect when you turn the key off and the machine stays running?

[@Heidenryk]

Wow, great question. Sorry, I'm not sure

[@Heidenryk]

You know its probably the ignition, key switch. How do you shut it off? Battery cable

[@abramheinrichs9853]

Did you get your problem solved?

[@Heidenryk]

It seems that halfway through this video. I flipped my phone. Fuel solenoid is suppose to be on the right side of video . Just flip your screen half way though. It go's up side down.. srry

[@philbitler5240]

There was so much movement in the camera and half of it was backwards

[@Heidenryk]

If you read the comment below yours, it explains that the camera was turned upside down , and working on the solenoid is pretty self-explanatory. If you need a better video than that, you might want to hire a mechanic.

[@cavaleiro95]

@@Heidenrykhey how did you remove the solenoid? Mine won’t come out

[@cavaleiro95]

@@Heidenrykhey how did you remove the solenoid? Mine won’t come out

[@Heidenryk]

@@cavaleiro95 after the bolts are loose, it should be loose, just pry a little with a screwdriver