You do a great job explaining the basics. I too am brand new using a fish finder. Hopefully, I can increase my catch rate using the tools you taught. Thoughts of this make me hungry for fish!
@1Cast1Fish2 жыл бұрын
Glad it was helpful!
@DiscoPenguin84 жыл бұрын
Just bought a garmin striker 4 and have found all of your videos extremely helpful. Thanks for being clear and concise in them! Subscribed 👍
@1Cast1Fish4 жыл бұрын
Great to hear! Thank you
@FishnTheSouthOkanagan782 жыл бұрын
Being a absolute newbie (days old) this video helped!. When learning about adding the open water transducers from the small manual that came with the bundle, your explanation for the GT8 and GT15 were very helpful in what I’m going to look for in the future with this new unit. Thank you again! 👍🏻👍🏻
@1Cast1Fish2 жыл бұрын
Glad it helped! Thanks
@beaudryadventures67852 жыл бұрын
I bought a Gt8HW_IF, it worked for bit and now the screen keeps re-setting and I can't make it stop. I bought it for ice fishing with my striker 4. Went back to factory settings and still the same thing. I'm not sure what I did...
@jwoodavant4 жыл бұрын
*This is on my boat. Works great Nice bright display even in direct sun which is something I was worried about. Its a small displayood layout on the buttons. It has good accuracy and resolution for an entry level sonar. Low battery drain even on the brightest setting. I mounted the transducer on the transom following the directions and screwed the bracket directly to the boat. Worked fine. No issues. I wish the manual was a little better but whatever. I figured out how to do the things I need it to do. I think this is the best value out there. I'm very happy with it.*
@1Cast1Fish4 жыл бұрын
Glad to hear you are happy with it...if you ever have any questions, I would be glad to try and help
@hashtagjustadad51104 жыл бұрын
Thank you for making this video! You answered questions i didn’t even know i needed to ask as i research fish finders.
@1Cast1Fish4 жыл бұрын
Plenty of good info here to help learn and make a good decision on a fish finder....glad this helped.
@mytube36873 жыл бұрын
Thank you for great information, the standard transducer it works at 200W and the gt-15 it takes 600W it means if you upgrade your system from standard to gt-15 you are battery will drain faster, you are going to get around 1/3rd of the time which you were getting before upgrading.
@1Cast1Fish3 жыл бұрын
Yes, it will definitely use more battery...and I would not recommend a in hull mount like I have shown in other videos.
@magnusatheos7301 Жыл бұрын
This was a very good video which answered questions I had that the Garmin website couldn't answer as clearly and quickly.
@1Cast1Fish Жыл бұрын
Glad it was helpful!
@casualcarolinafishing58354 жыл бұрын
Great explanation. I never really bothered digging into what the difference was. Now I know!👍💯
@1Cast1Fish4 жыл бұрын
Glad you found the info useful....just looked at the little icon above this post on my screen and it says you have been subscribed over 2 years....it really has been awhile your like a OG sub man
@ColoradoMartini4 жыл бұрын
Explained very well. I love hearing about the tech behind these devices. Thank you so much for the time you spent on our channel. You rock. Also be careful there is a bug right now that looks like you are not following someone. But if you go to their home page and if it shows you are, then you are.
@1Cast1Fish4 жыл бұрын
You know I had had a similar problem with some channels I follow not showing up as notifications when they post. It seems I have to unsubscribe and re subscribe to fix it.
@EngineeringHooksets4 жыл бұрын
I got my first garmin last black Friday and I'm super excited to start using it this fishing season. Nice video man I subbed
@1Cast1Fish4 жыл бұрын
I am sure you will love it when you get it out on the water and give it a try. Hope you get out to fish....lots of places seem to be going on lockdown now and no fishing.
@crubie744 жыл бұрын
Thanks for the video - answered a lot of questions that you'd think Garmin would have more information on! I will add that this information is true for both the Striker 4 and Striker 4 Plus.
@1Cast1Fish4 жыл бұрын
Yes, this is accurate for the Plus model as well....the CV uses a different transducer. Glad you find these videos helpful
@kerrys.57253 жыл бұрын
Love your Garmin Striker 4 videos! Can't wait for your upcoming video on navigation and use of waypoints! Cheers, and God Bless!
@1Cast1Fish3 жыл бұрын
Glad you like them! Thank you
@FarmallFanatic4 жыл бұрын
I get a boat, this is my go to channel. Good job finding your groove 👍
@1Cast1Fish4 жыл бұрын
Thanks buddy....you ever get one....I will be waiting for an fishing invite :)
@joelh35444 жыл бұрын
I’d like to add the GT8HW-IF is also compatible. It is the ice fishing transducer. I use it on my striker 4 and it is a significant improvement over the supplies transducer. It’s cable is very flexible , even at 0 degrees it stayed flexible. The foam that comes with it is much better and keeps the cone shaped transducer level. If you are going to ice fish. I’d recommend picking up that transducer.
@tombob55534 жыл бұрын
Thanks
@1Cast1Fish4 жыл бұрын
Very good addition and super true...not much ice were I am at, so I never really think about it. I get a lot of requests for some ice fishing info, but it's rare I get out on the ice anymore.
@dustinj76502 жыл бұрын
agree - the ice transducer has benefits over the standard chirp (boat) unit (that can also be used for ice fishing). The ice ducer is easier to hang flat, comes with a better float, and has that 85 kHz range (vs. the 10 kHz range of the boat ducer).
@truenorthangler4 жыл бұрын
That’s a great tutorial my friend. Lots of great information. Thanks so much for the explanation. Left a big 👍 from the North. Adrian
@1Cast1Fish4 жыл бұрын
Thanks buddy, glad you enjoyed and found the info useful
@TheHolmsteadWithJesseHolm Жыл бұрын
Thank you for simplifying all of this sophisticated tech info for me, I appreciate it. Cheers.
@1Cast1Fish Жыл бұрын
Glad it was helpful!
@ronaldhowell41464 жыл бұрын
Great info,,might start with standard chirp till I learn how to read them, I fish the river 60 to 80ft deep, been wanting to get one and see if one of these will help me find fish.thanks for breaking it down for us
@1Cast1Fish4 жыл бұрын
For the majority of people the standard chirp transducer will work fine....unless you have to have to have the best then the higher end transducers are a giant leap forward. If you have any trouble seeing the fish a few things to play with on your unit is the frequency selection and scroll speed.
@dustinj76502 жыл бұрын
CHIRP will make it easier for you to read it!
@randymoseman36984 жыл бұрын
Question: Doesn't the watt rating dictate how much "power" or "energy" is being transmitted? Does chirp frequency actually put more "energy" into the water or is it the same amount of power spread out through the frequencies?
@theforgottenwalker Жыл бұрын
Hi I have purchased a Striker 4. I am very happy with the way it performs, however i did notice after a short period of time there was a definite fogging on the inside of the screen. This would come and go depending on atmospheric conditions. Then after washing the boat down including rinsing the Striker with water from the hose, not high pressure, just running water, a couple of the keypad buttons wouldn't work. I sent it back to Marine Deals, the supplier and was informed they had tested it, it worked ok, submerged it in water, retested it, it worked ok. The fogging on the screen was not actually water inside the unit it was moisture in between the screen and the front cover. ok being the trusting sole that I am, I accepted the explanation. Well the next time I washed the boat and got the sounder wet, same thing happened so I opened it up and found water in behind the keypad and no double layer of glass/whatever screen, moisture on the inside of the screen is inside the unit. I dried everything of and reassembled it with a smear of silicon grease on the main seal and around the edges of the keypad. The next time I went fishing it was raining and what do you know after a short time out in the rain it was so fogged I couldn't see the display. Is this normal, am I expecting too much, luckily so far the only water ingress has been fresh, not salt. But it is only a matter of time before the water fresh or salt will damage the electronics. The unit obviously leaks probably through the keypad. Am I the only one with this problem?
@1Cast1Fish Жыл бұрын
I would call Garmin if it's under warranty still, or send it back to the store you got it from, this should not be happening...something is wrong
@ronhughes55574 жыл бұрын
Is there anyway to increase the size of the water depth on striker plus 4 ?? on striker 4 the reading is way larger than plus 4 . thanks
@1Cast1Fish4 жыл бұрын
Not sure since I have the regular Striker 4....I would look in the readout menu and see if the option is hidden there.
@sukhnandansukhraj58534 жыл бұрын
Very detailed explanation
@1Cast1Fish4 жыл бұрын
Thank you
@michaelisraels9562 жыл бұрын
I just bought the Gamin Striker 4 CHIRP Sonar Kit. It will be arriving between January 27-Feb 3rd. First, I would like to say you did an amazing job with the tutorial. Very Very good video. I Kayak fish and Ice Fish in Michigan. With what comes in the box will it work for both Ice fishing and Kayak fishing? Never used a fish finder before... Thanks again. Great video. I am now subscribed.
@1Cast1Fish2 жыл бұрын
I have seen people use the standard transducers for ice fishing before, so yes it will work, might just need a bit of extra work to get it right. Garmin also makes a ice specific transducer that is kinda cone shaped as well. The CHIRP transducers are pretty big, so that could also be an issue on the ice
@Weekendwarrioroutdoors4 жыл бұрын
great tutorial, chirp sonar sure raised the bar.
@1Cast1Fish4 жыл бұрын
It really has...it is amazing how clear the image returns are with chirp
@randyluvan96234 жыл бұрын
This is so great! I watched all your videos! You thought me so much!
@1Cast1Fish4 жыл бұрын
I love reading comments like this....awesome to hear....thank you
@Bootyhunter19713 жыл бұрын
Expect, who two speel 🤣🤣
@rockymntdan12 жыл бұрын
Would have been nice to see an actual demonstration. I still don't know which to use when. Or with such a low res screen as striker 4 if you could even see any difference.
@1Cast1Fish2 жыл бұрын
It does make a difference, even with the smaller Strikers, however it is more noticeable on a larger screen, or deeper water.
@jeffro74074 жыл бұрын
thanks for the info, hope you keep making more you have really help me with my striker 4. wish you could make some on the sriker7sv having a time with it, my 4 seems to out do it. thanks again great info and keep them videos coming.
@1Cast1Fish4 жыл бұрын
If I ever get ahold of some other units I will definitely make some videos with them too....glad these are helping
@ericmulcahey14 жыл бұрын
Thank you for the details on the Garmin Chirp. I am a first time buyer. Most places he’s that and pull out the $1,000 fish finders. I am seeking one to put into my 15’ jon boat. I would rather go as cheap as possible incase someone yanks it or I damage it.
@1Cast1Fish4 жыл бұрын
This would be a great option, or get the fish finder put on a Ram Mount and just remove it when you are done fishing.
@ericmulcahey14 жыл бұрын
1Cast 1Fish, great idea. I am just catching up on your full line of tutorials on the Garmin Stricker 4.
@1Cast1Fish4 жыл бұрын
Awesome...any questions let me know...just be sure to start a new comment with any questions so it don't get lost in other comments
@chadbowmar95402 жыл бұрын
Excellent videos, sir! Tons of good info that not all of us know. Keep it up and thanks!
@1Cast1Fish2 жыл бұрын
Glad you enjoyed, thank you
@musky7011 ай бұрын
Excellent job explaining this stuff!!!
@1Cast1Fish11 ай бұрын
Glad it was helpful!
@staytight63403 жыл бұрын
Great work on the editing I'm wondering why you don't have more subs
@1Cast1Fish3 жыл бұрын
I appreciate that, thank you
@scottlouis77854 жыл бұрын
Thanks I`ve never used a finder so this makes me understand better
@1Cast1Fish4 жыл бұрын
Awesome....glad it helps...plenty of videos here to help with fish finder basics
@ViaHook3 жыл бұрын
Have you been able to see thermocline with striker 4cv? If so what settings did you use?
@1Cast1Fish3 жыл бұрын
You can see the thermocline with the Garmin Striker...however what a lot of don't realize is that in many lakes depending on the time of year and other variables a distinct thermocline may not actually be present. A thermocline generally will show up as a area of "noise" in a line somewhere within the water column across the fish finder screen (not top or bottom noise). The thing to remember is that since it will show up as a noise signature normally, you want to be careful about setting your noise removal setting to high, as it can remove the thermocline as well. Hope this helps
@MySliceOfHeavenoutdoors4 жыл бұрын
that is very interesting, you did a great job on describing the CHIRP sonar
@1Cast1Fish4 жыл бұрын
Thank you...it is pretty interesting how far sonar has come over the years
@RAW0403 жыл бұрын
Hey there, I just bought a Striker 4 yesterday because of your videos and I had a question. When would you want to use regular sonar over CHIRP, and when would you want to use 77 kHz over 200 kHz?
@1Cast1Fish3 жыл бұрын
I use Chirp almost exclusively...as for the frequency 77 for shallow water and 200 for deeper
@petewhite854 жыл бұрын
Thank you again for these excellent videos.
@1Cast1Fish4 жыл бұрын
Thank you for watching
@fabfishing74224 жыл бұрын
Awesome Paul!!! Now we need to take it out for some field tests 😁
@1Cast1Fish4 жыл бұрын
I am ready
@fabfishing74224 жыл бұрын
@@1Cast1Fish Amen buddy 👊💪
@TimberHillRedboneDogs4 жыл бұрын
Very well demonstrated!! I think i like the chirp version.. Thanks for the information and comparison
@1Cast1Fish4 жыл бұрын
It definitely makes things much more clear and easy to see
@markstraffin46543 жыл бұрын
Hello Excellent video and one of many. I have a pontoon boat and will mount the transducer on the left pontoon. I mainly want to see what is under the boat and what is up ahead as I have already dinged my prop. Will this show under and to the front by mounting this in the rear or is there another trick? Some points are shallow with tree stumps and I would like to see them in advance
@1Cast1Fish3 жыл бұрын
This would not be a good option IMO for navigating hazards in a waterway.
@Dogatemyhomework9273 жыл бұрын
Did you post examples of the difference in the transducers in use? Garmin needs to give you some big bucks
@1Cast1Fish3 жыл бұрын
This video probably in the most in depth I have at the moment on the difference between transducers.
@Mallets784 жыл бұрын
Great video explaining what Garmin did not...
@1Cast1Fish4 жыл бұрын
Yeah not many people actually know what the "Chirp" really means on the factory basic transducer. I do wish the info was more readily available.
@cainebenham83463 жыл бұрын
@@1Cast1Fish just curious where you got the +/- 5kHz info from as I have been searching everywhere for this with no success. And the Garmin customer service evenn told me that the dual Beam does not CHIRP.
@1Cast1Fish3 жыл бұрын
I got the info from calling Garmin and talking with the Tech people, not customer service.
@cainebenham83463 жыл бұрын
@@1Cast1Fish okay thanks for the info!
@jerryjohnson7734 жыл бұрын
thanks you for your youtube it help me out a lot . i insall my garmin on my jetski today
@1Cast1Fish4 жыл бұрын
That's a pretty cool way to fish...I am sure a Jetski is a ton of fun.
@paulcasadio3 жыл бұрын
Great video as usual - thanks for creating. Is there any reason why you would ever use the less precise non chirp settings as opposed to the chirp settings? Are there any advantages for using standard, non chirp settings? Thanks.
@1Cast1Fish3 жыл бұрын
I get this question a ton...I should do a video coving this exact topic, but in general I like non chirp for really dirty water or water with alot of debris
@paulcasadio3 жыл бұрын
@@1Cast1Fish Right on, thank you very much for the follow up - makes total sense. All your videos are really well made and totally understandable. Thanks for the posts!
@1Cast1Fish3 жыл бұрын
@@paulcasadio thank you very much...hope you are enjoying the channel
@trophyshotoutdoors5694 жыл бұрын
Awesome info buddy! Thanks for sharing as always!
@1Cast1Fish4 жыл бұрын
Thank you man
@777geeman4 жыл бұрын
I was happy with the stock transducer for my CV4, GT 20 i think. Maybe the GT-8 would serve my bottom fishing in coastal waters better. I'll have to look into it a bit more. Also Garmin NZ is showing it at NZ$299, double the amount. Our dollar must really suck at the moment. Anyway, interesting.
@1Cast1Fish4 жыл бұрын
You will definitely see an improvement with a dedicated Chirp transducer, but also it may be more beneficial to look at a bigger sonar screen as well.
@saratogatribecliq Жыл бұрын
Would you recommend using this when going out in the ocean? I have a boat club. I used Bass Pro shop portable mount. The clamp wasn’t big enough so i used a c clamp from Home Depot. It eventually fell off and my transducer was dragging the the water. Any recommendations for clamping it temporarily when using a boat club?
@1Cast1Fish Жыл бұрын
I think you can buy better temporary mounts for these applications. As far as transducer, most temporary mounts do not do well with higher speeds, so I guess depends on the types of boat you are using as well.
@dongrom75193 жыл бұрын
Good day,i have my fish finder stricker 4,bt i have a problem thats it says, unsupported transducer conected, this problems appear when i restore the factory setting.please help me how to fix it thanks
@1Cast1Fish3 жыл бұрын
Look to see what transducer you are using...then look in the menu options to see what transducer is selected. It may default to a different transducer and all you have to do is select the correct one.
@scottdewalt6556 ай бұрын
Is the cone angle adjustable on the gt8? I'm fishing rivers and shallow lakes. Can I widen the angle?
@1Cast1Fish6 ай бұрын
Yes you can chose the sonar frequency which changes cone angles and coverage
@uni95023 жыл бұрын
Great informative video man.. I have a Seadoo Fishpro, based in New Zealand and occasionally fish deep (200-350m) The unit seems to work really well as last time out I was in 270m and the unit had no apparent problems.. the default setting is Chirp and the beam angle according to the screen is 17deg.. would you suggest any alternate manual settings when going deep or just leave it in auto, scroll speed is auto also - transducer is GT15IH
@1Cast1Fish3 жыл бұрын
I am a big fan of the "If it isn't broke don't fix it" mentality...if its working great I would leave it. You could play with the gain a bit and see if that helps or hurts.
@foragefishbikeboat2 жыл бұрын
Great informative video, question, how much of an improvement would a GT8 transducer make? Is it really noticeable and worth the upgrade?
@1Cast1Fish2 жыл бұрын
Really depends on your fishing type...shallow waters...not so much....deep water 50+ ft you will start to really notice the differences.
@yerbyray3 жыл бұрын
Question. What would make you use the 77 vs 200 mghz? I guess there are different applications for each
@1Cast1Fish3 жыл бұрын
Check out class #5 I talk about frequency selections kzbin.info/www/bejne/kHiQc2WPlNhrkJo
@berlinvlogs4 жыл бұрын
high clarity , target separation... wow this Gt15 so accurate.
@1Cast1Fish4 жыл бұрын
It is a sweet transducer
@tasosnasopoulos5413 жыл бұрын
@@1Cast1Fish the GT15 has 600w, I think it is too much for the striker 4 which has a power of 200w. I use the classic transduser 77/200 and I see targets at 60-70 meters very well. Thanks for the information !!
@painter083 жыл бұрын
Appreciate your content. Good presentation. I have a question about the gps way points mode. I was thinking that the shoreline would be represent on the unit? Also the brown and blue wire are another sensing unit?
@1Cast1Fish3 жыл бұрын
Yeah the shoreline would be a big plus, but that requires a type of mapping card or preloaded mapping. Some higher end model have these features and they can be very useful. The Brown and Blue wires are just for communication...for 99% of installs they are not needed, and for the 1% that use them I would have bought a higher end unit if I needed those features.
@Sertao20134 жыл бұрын
What is the average depth of a lakes in the US ? In Ky the deepest lake is 249 feet . Norris lake in Tennessee is 210 feet . Fontana lake in NC is 440 ft . I think the 800 foot GT8 would be the max needed in the lakes in the US.
@1Cast1Fish4 жыл бұрын
I think these chirp transducer really shine in the deeper water lakes and oceans where you may fish 100+ ft down. The thing to remember I sthat these are max depth levels listed by the manufacturer under ideal conditions...so if they say 800ft then really I trust good info down to about 500-600 ft maybe.
@haroldrushton67353 жыл бұрын
Very informative! Thank you for sharing this information. 👍
@1Cast1Fish3 жыл бұрын
Glad it was helpful!
@markmemmott36084 жыл бұрын
Thank you so much for your videos. Lots of great info and very well done. I fly fish lakes from a float tube and rarely fish water deeper than 30 feet. I am going to go with the Striker 4 Plus CV that comes with the GT-20 transducer. Will the chirp at the 70kHz and the GT-20 transducer be the best for the shallow water fishing I do or should I pick up the GT8 transducer?
@1Cast1Fish4 жыл бұрын
The stock transducer will be plenty for your type of fishing use the lowest Chirp frequency setting you have available since the beam will be wider...perfect for shallow water.
@andrewkasmiroski62804 жыл бұрын
I am new to fish finders, and first off great video! My question is that if the CHIRP puts more energy into the water, why would you want to use the single frequency option? Also, what is the difference between the low range and high range frequencies? Are they each used for specific structures or depths?
@1Cast1Fish4 жыл бұрын
I use the standard non-Chirp when there is a lot of debris in the water since the chirp is very sensitive and picks up the debris more. Check out my videos on sonar frequency to explain the high and low...much better explanation in those videos than what I can type here trust me.
@gregstabryla99454 жыл бұрын
Fantastic explanation, although I'm dealing with the striker 4.
@1Cast1Fish4 жыл бұрын
Striker 4 has a Chirp transducer as well
@gregstabryla99454 жыл бұрын
The one that it comes with, I realize that. You are my go to guy with the Striker 4. Taught me what I need to know. Thanks 👍.
@ifishcatfish4 жыл бұрын
I wish i could see such a video about the new garmin units. thinking of getting one but its hard to tell whats the difference between them and i don't want to read 3 months to find out : )
@1Cast1Fish4 жыл бұрын
I hear you on the reading part....wish I could get my hands on some newer units...thing is right now it seems like technology is advancing so fast, once you get a new unit its practically obsolete...plus with all the ad on's you could spend $5,000 in sonar real fast
@jestione3 жыл бұрын
Thanks for the tutorial.
@1Cast1Fish3 жыл бұрын
You're welcome!
@bassbob71804 жыл бұрын
Great video as is all of your others on the Striker. If I only fish in 6-12 feet of water, o should be using the 200 MHz correct?
@1Cast1Fish4 жыл бұрын
I would use the 200 kHz for 6-12ft for the best view....sounds like you got it
@sm57014 жыл бұрын
Hello friend , i hope that you are verry well , i have a question about the finshfinder garmin striker plus 4cv ordered from usa , they have french langage and metric unites like meter and C°...? , cordialy .
@1Cast1Fish4 жыл бұрын
I could type alot here, but if you wait until Friday, I have a brand new video coming out that explains exactly this question.
@slickwillie33762 жыл бұрын
I'm surprised nobody on KZbin has tried this to see if it works, but do you think it is plausible to use a chirp like this as a forward looking sonar?
@1Cast1Fish2 жыл бұрын
It does not work that way, but I actually see this question a ton...I honestly think I will make a video on it :)
@jacobramirez5303 жыл бұрын
I usually bass fish lakes sometimes go to the ocean will the transducer that comes with it be fine
@1Cast1Fish3 жыл бұрын
Yes it is a great stock transducer
@jacobramirez5303 жыл бұрын
1Cast 1Fish cool thanks
@williamjohnson46 Жыл бұрын
Can I use it for ice fishing and would it show my ice jig?
@1Cast1Fish Жыл бұрын
Yes, and Yes with the correct settings, you want the gain set higher and the screen scroll to ultra. Those are good starting points for the ice.
@rickster6.04 жыл бұрын
If I upgrade to the GP8 transducer how far out to the side will my cone be and is there still a way to see the size of the cone? Thanks
@1Cast1Fish4 жыл бұрын
To find cone size you need the frequency (Sonar cone angles) and the water depth (How big the cone will be) Deeper water will be a larger cone since it has more room to expand.
@paulpenard7321 Жыл бұрын
If you install a transducer from a Garmin Striker 4cv on a Garmin Striker plus 4, will the ''Clear view'' effect like the Garmin Striker 4cv have? Thank..
@1Cast1Fish Жыл бұрын
If you use a Clear vu transducer on a non Clear Vu unit, you will not get Clear Vu
@suzanginani75173 жыл бұрын
Thanks for your videos. I am generally fishing in water under 20 feet in depth. Will I benefit from buying an SV unit vs CV if cost is not an object? Also, what is the chirp setting you recommend for under 20 feet?
@1Cast1Fish3 жыл бұрын
I would go SV the side imaging capabilities really helps with determining in what direction the fish are located. I would also get the biggest screen you can afford. For 20ft you want a wide Chirp band
@matduren43404 жыл бұрын
how do you get to the frequency area on the unit, can't seem to locate it. Does the transducer need to be attached? This is a pre install question
@1Cast1Fish4 жыл бұрын
Are you asking how do you go through the menu to select what frequency you want to use?
@figueroa21914 жыл бұрын
I just got the striker 4 portable today. Can I update the garmin 4 to have the clear vu? I bought the wrong one. Or should I just upgrade it
@1Cast1Fish4 жыл бұрын
No you can not upgrade it, sorry....you will need the unit with Clear Vu
@klx300r8 Жыл бұрын
Need a gt 8 or gt 15 ? Absolutly , For fish winter ??? Or the origine sound its fonctionnel ???
@1Cast1Fish Жыл бұрын
For the majority of people the original standard transducer is good enough. The better transducers just give better images, and the difference is more noticeable when you move up in screen size.
@jeffro74073 жыл бұрын
which transducer would you go with, the lake i fish is 5 to 33 foot deep, lots of drop offs and 85% of time crystal clear like 4 to 6 foot down, after a rain lite to medium stain thanks for your videos and really enjoyed them.
@1Cast1Fish3 жыл бұрын
You could spend the money for a upgraded CHIRP transducer, but for your conditions honestly you are going to be just fine with the standard transducer and select a CHIRP frequency like CHIRP 77kHz.
@jeffro74073 жыл бұрын
@@1Cast1Fish thanks for info
@raimundimiratinga12433 жыл бұрын
olá, gostaria de saber se da pra atualizar o sanar striker plus 4 em cleavu usado o mesmo aparelho?
@1Cast1Fish3 жыл бұрын
O Striker 4 Plus e o Plus CV são dispositivos diferentes. O Striker 4 CV foi substituído pelo Striker 4 Vivid CV.
@raimundimiratinga12433 жыл бұрын
@@1Cast1Fish obrigado 👍
@seadoggozo-fishingguitarsa18373 жыл бұрын
When you are using the contour mapping feature, what is the best sonar set up? I was wondering if the lower frequency/ wider beam angle would mean getting more mapping done for fewer 'passes'?
@1Cast1Fish3 жыл бұрын
The wider angles will cover more area and also map a bit faster...it won't be a crazy speed difference, but it will be a bit faster.
@darrenburzminski39783 жыл бұрын
Very informative, thanks
@1Cast1Fish3 жыл бұрын
Glad it was helpful! Thank you
@denismguitar15524 жыл бұрын
Very helpful. Thank you.
@1Cast1Fish4 жыл бұрын
You're welcome!
@stillinyaisstillinur33004 жыл бұрын
Dude that was gr8 ty tons
@1Cast1Fish4 жыл бұрын
Glad you enjoyed
@jimmycraddock27263 жыл бұрын
I am bran new to fish finders and I don't understand where to cast when I see a fish on the screen
@1Cast1Fish3 жыл бұрын
Check this out and let me know if it helps any kzbin.info/www/bejne/kHisppqZZpKBabs
@JerrysWoodShopandOutdoors4 жыл бұрын
I love fishing but never have any luck at it, maybe something like this will help.
@1Cast1Fish4 жыл бұрын
Knowing how to use a fish finder definitely is a step in the right direction to catch more fish
@sammyb10383 жыл бұрын
Just bought a Striker Vivid 4cv. It comes with a GT20-TM transducer. How does this compare to the GT8 and GT15?
@1Cast1Fish3 жыл бұрын
Unless you are fishing very deep water (100+ft) I would stick with the standard transducer. The others really shine in deeper water or faster trolling.
@zammit16834 жыл бұрын
Hi. I've seen quite a number of vids on sonar stuff, and almost all shows on reading sonar while on the move. Maybe, u can teach me on how to best use sonar while the boat is anchored, baited or bottom fishing setup. Maybe little bit on the setting so i can see my bait down underneath, and those fish swimming into the cone at what dept.. thanks.
@1Cast1Fish4 жыл бұрын
I do have a great vertical presentation video planned
@zammit16834 жыл бұрын
@@1Cast1Fish thanks. Really appreciate it.
@ralphwaltrts59942 жыл бұрын
I have the standard Garmin Striker for Fishfinder the fish do not show up as arcs on my fish I don't even know what the fish look like. What frequency should I set my Garmin Striker for at to get the best results or is there something that I've done wrong with my transducer I've got it mounted inside the kayak at the bottom it's a through the whole amount so it sends the beam through the hole to the bottom of the water but I don't seem to get clear images or images of arcs of any kind. And which way does the Garmin Striker 4 transducer point does the narrow end of the transducer Point towards the front of the boat or the back of the boat there are no instructions provided with this Garmin for Striker for. Right now I'm a little frustrated and very disappointed in the Garmin Striker 4 it's probably operator error. Help please help help
@1Cast1Fish2 жыл бұрын
So I would do a factory reset and us ethe base settings to start...and turn the fish icons on....they will likely help you. the narrow end where the wire is normally faces forward. Is the transducer in the water?
@RCCesna4 жыл бұрын
Question: In your opinion, is it worth investing in an entry sonar such as the striker and buy a better transducer or buy a higher sonar and not upgrade the transducer. Mostly kayak fishing but a few fishing days in a boat in large reservoirs.
@1Cast1Fish4 жыл бұрын
The bigger question is how much money do you want to spend :) Honestly for my kayak outings I use the Striker 4 and the standard transducer...this is on small lakes that are not all that deep….the Striker 4 does have a basic Chirp setting you can choose and it does make a difference IMO. If I was going to spend a limited amount of cash though I would get a bigger screen size over a new transducer or upgrade to the Striker CV models and such with contour line mapping.
@RCCesna4 жыл бұрын
1Cast 1Fish Thanks for the quick answer. I’ve to replace an old broken sonar. I’m hesitating between the striker 4plusCV, mostly to get the charting capabilities for regular lakes. However, if I get lucky and find a discounted sonar with Side Imaging up to 2x the price , I will consider it as I’m switching lakes regularly and would like to find the fish quicker SI and do more vertical fishing DI.
@BABennett734 жыл бұрын
Great info! Do the upgraded GT 8 & 15 work through the kayak hull your do they need to be mounted into the water? Thanks from a new subscriber.
@1Cast1Fish4 жыл бұрын
They will work great...the only transducer types that seem to have a few issues are side imaging and down imaging transducers.
@bryanedwards76074 жыл бұрын
First, THANK YOU for all of this information!!!! Will the Striker Plus 4CV also work with the GT8HW transducer?
@1Cast1Fish4 жыл бұрын
Thank you....The CV model has a different transducer ...so in short, no it will not work.
@stevenfarmer12144 жыл бұрын
Is there any situation you would use the standard 77/200 khz frequencies instead of the 77/200 chirp? I would think you would always use chirp but it this correct? Thank you!
@1Cast1Fish4 жыл бұрын
Chirp 99% of the time...non Chirp for very dirty water with lots of debris...such as a lake after fall turnover...or a river after heavy rains.
@RubiaFamilyFOURever4 жыл бұрын
Nice tutorial friend
@1Cast1Fish4 жыл бұрын
Thank you
@UtahFishingChannel4 жыл бұрын
Thanks for sharing! I just subscribed.
@1Cast1Fish4 жыл бұрын
Awesome thank you
@stevenfarmer12144 жыл бұрын
Great video! I've got the striker4 cv. I'm having trouble getting clear images and see a lot of mirror imaging / garbage on the screen. My Ontario inland lakes are all quit tea stained and I find the best setting is 77Khz to have a chance. (Depths 20-100 ft : usually in 60ft range). Gain is set to low to help clean up garbage. Any tips?
@1Cast1Fish4 жыл бұрын
If the water is full of debris, there is not much you can do other than adjust the gain on these units. You may try different color pallets to see if that helps as well.
@marcuspierantozzi4 жыл бұрын
Awesome video.. please do one on the Garmin Striker 7SV models if you can
@1Cast1Fish4 жыл бұрын
Wish I could, but I don't have a 7SV....I really wish I could do a video with the live Scope stuff since that is pretty cool as well. Wish Garmin would hook me up so I could make some more videos....but for now I buy everything myself...so still a bit slow going
@marcuspierantozzi4 жыл бұрын
@@1Cast1Fish I understand.. the struggle is real hahaa.. I'm trying to buy one.. where I live they cost almost $800
@1Cast1Fish4 жыл бұрын
They definitely can get pricy real fast
@petebradt4 жыл бұрын
Good info I will use next week.
@1Cast1Fish4 жыл бұрын
Awesome...hope you have a good outing
@petebradt4 жыл бұрын
@@1Cast1Fish My old man's (66) week-long fishing vacation at Eagle Lake, CA, home of the fightin' Eagle Lake Rainbow Trout. I use dinky little ultralights to catch them. :D :D :D But I got the magnetic transducer mount for the Striker4 (FIRST USE!) so I can use it on our rental boats. I'll PM you a full report. :)
@1Cast1Fish4 жыл бұрын
Awesome, you guys enjoy yourselves and catch a few big ones. The Striker is great for moving around on kayaks or rental boats like that. Good luck and let me know how you do.
@HeWhoHath3 жыл бұрын
Confused regarding the other transducers: I thought lower hz meant a wider cone, but you’re saying the opposite with these other two transducer s you can buy. Is this correct?
@1Cast1Fish3 жыл бұрын
In general the lower frequency will be the wider cone angles, however every transducer is designed and built a bit different. For example if I have a Lowrance and a Garmin transducer both using 77 kHz, they may have slightly different cone angles. This is the same with the high end Garmin Chirp transducers as well...just a tad different than the standard offering.
@hoss0114 жыл бұрын
my gpa bought a boat used w two striker 4's, how can i tell which traducers are on the boat if they have been upgraded?
@1Cast1Fish4 жыл бұрын
They might have the tag still on the cord...if not then you can look online at the different models and compare the pics to what you have.
@willcountydrone20222 жыл бұрын
I have a question: if I got the striker 4 ice bundle package and it has the cone as the transducer is that considered the DUAL BEAM when you select your transducer type in the settings?
@1Cast1Fish2 жыл бұрын
The ice transducer has a bit different cone angles I believe....not real verse on the ice side since I do not get ice to fish here in VA. It is dual beam though, so yes it should work
@jimhopf93793 жыл бұрын
Hey thanks for the great info. Once you identify fish, do you ever really know exactly where they are? Or you now just have a good idea that they are around you. Thanks
@1Cast1Fish3 жыл бұрын
It will vary...figure out how big your sonar cone is at the depth the fish is located....now when you see the full arch you know the fish is no longer in that cone....so now you know it is at least "X" distance away. Now this is where it gets tricky with alot of variables such as sonar scroll speed, boat speed, fish speed and direction, ect. It is really a educated guess, but I tend to figure if the arch is on the far right of the screen, then the fish is likely just outside the cone, middle of the screen, multiply cone diameter by 2 for distance....and far left...multiply by 3. This is not all exact, but it is how tend to guess.
@jimhopf93793 жыл бұрын
@@1Cast1Fish Thanks, this makes sense, and I'll try and practice and get a sense of it. Sounds like you think they move right to left? I have my transducer hanging over the right side of my kayak.
@1Cast1Fish3 жыл бұрын
The fish can move any direction around the boat. The screen however only shows a 2d image that moves right to left (new to old data)
@silvercreekfarm59302 жыл бұрын
Good video, but mine came with a gt20.
@1Cast1Fish2 жыл бұрын
The GT 20 is a good choice for basic CHIRP
@south_coast_tackleАй бұрын
Just got my Striker Plus 4 and watching your videos. On my Frequency screen I only see "Chrip, 150kHz, 200kHz, or 240kHz". I don't see anything for a CHIRP200.
@1Cast1FishАй бұрын
What transducer are you using? I believe it should be Chirp 77, Chirp 200, 77, and 200 options.
@south_coast_tackleАй бұрын
@@1Cast1Fish just the standard transducer that came with it. When I check the sonar settings all I see is "Chrip, then 150kHz, 200kHz, and 240kHz". None of the others have CHRIP in front of it. That's why I'm a little confused.
@1Cast1FishАй бұрын
@@south_coast_tackle Might need to give Garmin CS a call...I may be missing something, but I believe it should be different options. I have never used a Plus, but it should be the same transducer as the base model just with addition of Quick Draw Maps.
@jacobacosta2103 жыл бұрын
Would this unit be useful for skinny waters when sometimes you’re at only 2 feet depth in water?
@1Cast1Fish3 жыл бұрын
Yes for the GPS...but in general to use sonar to get decent results I like 5+ ft of water. But it will be good to let you know depths
@garrygerlach59494 жыл бұрын
I have the Garmin 842sx not sure about the (+) My questions are,, I have chirp with downscan but want to add sidescan on my unit. Can I "add another transducer" to the unit without removing the other one, and how much, where, and which transducer am I looking for?. Will the new transducer have all the current features this one has as well? Thanks!
@1Cast1Fish4 жыл бұрын
I would give Garmin a call, since when dealing with this type of thing, it can be very unit specific and I would hate to steer you wrong since I am not familiar with that unit. Sorry I could not help more.
@davidhazen23944 жыл бұрын
My Garmin striker 4 show fish shapes and labels them by number such as size 1 through 6. I am assuming size 6 are the bigger fish. What I am curious is how do I know how big each fish size is?
@1Cast1Fish4 жыл бұрын
I saw your other question, but I don't recall mine labeling the fish by size. The only numbers I see are the depth of the fish. What model do you have and how old is it?
@davidhazen23944 жыл бұрын
@@1Cast1Fish I don't know the model number I just bought it second hand it's about a year old
@JohnKlopp4 жыл бұрын
Great explanation! Would you recommend this or the CV version of the Striker?
@1Cast1Fish4 жыл бұрын
Always buy the most fish finder you can afford, so if you got the coin...go CV