Glock 17 Slide Assembly from scratch - with tips and tricks

[@dmarshall34]

When I first put a slide together I separate all the parts by plastic and metal parts. I give them a godd cleaning with a Dremel to remove all the little burrs from the casting process and give a little polish also.

[@shawn5170]

I ended up with a spare part. My firing pin channel liner. Luckily, I found another video in which the guy installed that first. Live and learn.

[@johndavid2042]

Thank you. This was very helpful. Straight to the point.

[@LeeHoushang]

Thank you so much I would love if you made a lower assembly vid thanks 0:56

[@pokegenandoz1574]

The trick i use to put the spring keepers on is to let the barrel hold the firing pin assembly and i just push the spring down. Excellent video 🤙🏼🤙🏼

[@SkepticalGuy99]

Is it okay if it doesnt seat and click? Mine keeps falling out

[@stephanjohnson5427]

Please get a camera stand, good assembly but yeah videography needs improvement sir 😅

[@jamesclark9722]

Mf fumbled everything he touched 😭

[@alfainc5868]

Jesus Christ " Karen " If you need someone to have a stand, for installation of a upper. You probably don't need to own a gun.

[@icbm50]

@@alfainc5868seriously?! The dude was fumbling and dropping shit like crazy. I agree. Get a stand.

[@thabushboy]

My spring is long asf

[@plinkynut]

is it necessary to lubricate the parts throughout the assembly, or is that false

[@princedaziowilliams9444]

My part that goes next to the firing pin won’t go in like yours did it’s kinda blocked

[@bigmacboney]

Do you have a lower assembly video for the glock?? If not could you make one

[@Melstaylit]

Tactical toolbox has one

[@mickyashey9818]

Good video except it would’ve been a whole lot easier to just drop the extractor and then put safety in and push up until it sits with the extractor and then don’t install the plunger until after the firing pin… just a thought for next time or anyone else in need.

[@FocusedHands]

Good break down! So a lefthanded eject version is just the opposite of this!!!

[@punksnotdeaditsconservativ1693]

Great info, but constructive criticism would be to get a tripod.

[@erkymane]

would this fit on a gen 2?

[@glenquagmire7724]

Bravo. Thank you for sharing.

[@michaelcooper7962]

Great video

[@Jerry-rb9eh]

What if the button for the extracter not locking in ?

[@careynorris9961]

Channel liner?

[@kdssupplyllc2720]

Exactly 😮

[@tapiocajai]

do u need to oil the parts?

[@montagebeargaming8436]

What’s the peice called your using to hold the plunger in ?

[@yourface3154]

Back plate.

[@CaptainEthan]

appreciate the video it helped me

[@giovannimoody5202]

i’m buying a lower of a 17 gen 5 from someone soon and i was going to build the upper. anyone have some good upper websites for me ? only reason he won’t sell me the full thing is because he has the MOS sight on there and doesn’t want to give that up lol

[@GarrettXPrime]

incredibly helpful thak you

[@alfainc5868]

Thank u sir 🙏

[@durangotang1681]

Is that raw stainless? Where did you get that slide from if you don’t mind me asking.

[@MrEricpomeroy]

Looks like it was coated.

[@Shaggy_0213]

Watching you do this with one hand was awful. Very helpful, but dear Lord 😅

[@Detman329]

Yeah it’s funny how these guy’s can’t get anyone to hold a phone for them lol actually you can get pretty good stands or something like a tripod..

[@punksnotdeaditsconservativ1693]

I agree.

[@DavidLLambertmobile]

I'd go buy a good Glock mat or gunsmithing tray. Small parts can fly all over! A rubber mat avoids scuffs, nicks, problems. Absorbs oil, CLP.

[@duanerumas6802]

Honestly Awesome Job and Thank you! One handed while filming, as well as excellent description. Awesome job. Thanks

[@JonBallRealEstate]

thank you

[@lorq3370]

What about the firing pin channel liner? Why didn't you show that being installed? You also didn't show the front and rear sight installation. So no, the slide was not assembled from scratch.

[@icbm50]

Holy crap have someone hold your camera.

[@danielsanders2412]

Get yourself a freaking tripod for your camera.

[@ylafla]

I almost gave up on this video

[@robertcuster5762]

One word for you, Tripod

[@Floridaman1780_]

Bro, get a tripod and a gun mat, otherwise, nice.

[@robertoortiz85]

The secret is to used two hands…😂😂😂😂

[@cashappalexander]

thank you for your help!

[@careynorris9961]

Channel liner?

[@doughnuts6801234]

Looks like it was Installed already

[@terrychant4365]

Kills the vid, if you were able to sit through the shaky 1 handed construction. I hung in to see if he could do the firing pin with 1 hand, but he can find a c clamp suddenly at that point. Seriously though, at the start I was digging how straight to the point this vid was, but not showing the bevel vs straight sides of liner is a huge miss.