Glock 43 Review: Final Update

After 3000 rounds with the G43, here are a few final thoughts on Glock's single stack 9mm pistol.
Be sure to check out our initial review of the Glock 43 here: • Glock 43 9mm Review
And our update on the Glock 43's reliability and accuracy here: • Glock 43: Accuracy and...
Taran Tactical base pads are available here: tarantacticalinnovations.com/i...
Support our channel, buy ammo from Lucky Gunner!

[@Greenmachine305]

Product reviewers, take note. This format should be a baseline.

[@halfcrab9026]

Your reviews are concise and quick. Not common on KZbin. Great work!

[@SpaceExplorer31]

I had a 43 and sold it to get the 43X. Missed the smaller 43 frame so I ordered a 43 frame. Love the combo. The original 43 was perfect for CCW. Adding more rounds negates the purpose of a small and light CCW. Now the back up magazine is a 10 rounder. But the 43 size with addition of a GEEPLATE is awesome.

[@MemphisMojo15s]

The 43 is perfect the way it is and 1 factory 6 round mag in the pocket as your backup. No extended mags, no extra hassle, just 13 rounds...My wife and I carry our 43 on our leg and 1 extra mag in our pocket.

[@Greenmachine305]

Good stuff. On a personal note, I find your production value to be top notch. All the pertinent info without the fluff, and high round count testing. Cudos. Your channel has just become a valuable resource to me. Subbed.

[@domenik8339]

You're my new favorite channel. You do your research, show us that you've done it (very important) and then give us your analysis. Much appreciated, and your store will be my go-to from now on, no doubt.

[@The1911Review]

Great videos for all the G43 reviews. What a pleasure to see knowledgable shooters giving solid, objective advice with quality testing. Excellent production quality on the videos and great articulation of your points. As an instructor myself I am very happy to have found your channel (subscribed) and am recommending it to my students now too. Great job guys!

[@LuckyGunner]

+guitars and guns Thanks!

[@redline870]

Glock has since released a factory minus connector due to trigger complaints. Before it was sold by Glock part suppliers, I sent my G43 back to Glock because my trigger weight was over 9lbs and they fixed it with a minus connector and some work on the trigger bar. Love my G43. Its my only pistol that has never malfunctioned in over 2K rounds.

[@omicrondec]

redline870 what's the trigger weight now?

[@mentugo]

Nice to have found you - very profound knowledge and good way of presentation! I like it and subscribed!

[@58MrMike]

Very happy with my first ammo order from Lucky Gunner! Great prices and quick shipping. Will order again for sure

[@localgunguy4992]

I had Magguts along with Hyve + 1 in my G43 and I had zero issues. Magguts and TT + 1 is very tight when fully loaded.

[@ultraclassic01hd]

I actually just stumbled on to your Glock 43 series. The first thing that impressed me was your introduction title. It was quick and to the point and you got right into your subject matter. ★★★★★ on your studio lighting and background choice and the fact that you do not waste any words and your articulation on what you are talking about is excellent. This channel is a definite sub for me! Keep up the good work and I will be looking forward to some of your other vids.

[@LuckyGunner]

+ultraclassic01hd Thanks!

[@obbionekanovi]

Just watched again, the three G43 videos, I like it even more...very good in detail and final conclusions, perfect. Anyone considering to buy a single stack subcompact should see these 3 videos together with the one you have made with 5 different single stack guns. Thank you Chris.

[@garypotyep9397]

Great review, as always. Thanks for all the work you guys do.

[@LuckyGunner]

+Letho theJackal Thanks!

[@MrBigden37]

Good honest reviews from a very knowledgeable person. Rock on brother.

[@impulse_media]

Great final wrap, I just finished Glocks entry level armourers course for my employer. Shortly after I've found myself considering a Glock 43 or 42.

[@trainwreck2k2]

First time seeing your videos. Instant subscriber. Keep it up. 👍

[@tacocat7749]

How am I just discovering this guy. Reviews are outstanding.

[@skg-vids]

I noticed the same issue with FTF when using the Pearce +1 extension with my G43. if I realized that the Taran +1 included a Mag spring, I may have went that route.

[@kennethkeller8522]

Good reveiw.. I have found Vickers +2 to work perfectly with my 43...I have also started carrying standard pressure 124gr HST ..instead of +P options .. in this smaller lighter pistol . has improved my follow up shots quite a bit ...

[@motocrusader72]

Agree...concise and to the point. Yours are “go to first “ reviews.

[@danyellecrow3776]

I have used Winchester 9mm 115-grain FMJ *STEEL SHELL CASE* in my (unaltered) G43 for cheap target practice. These had trouble feeding/ejecting. It is the only ammo I've had problems with, so I avoid uncoated steel case ammo. Great videos! Thanks for all the tips & reviews.

[@ironmann16]

Really love how Tarran Tactical Actually redeemed themselves with the base pads. Love the video!

[@chrisbeyer4451]

I love my glock 43,never had an issue with it (over 1000 rounds) but i must say the rubber grib and the stainless steel guide spring upgrade helps alot

[@omicrondec]

chris beyer what did the stainless guide rod spring improve?

[@jcraigshelton]

@@omicrondec it improved how he feels about his Glock.

[@EthicalPatriot]

Own all three you mentioned including the Performance Center model of the Shield and prefer the Glock. Thanks, Ray

[@johnhmccammon7735]

Ray McDermott ii

[@gymowner1232]

$5 years of carry 24/7, I find the PM9 the best 9mm gun period. 5 years in a Remora, it has been my secondary weapon for 6 years now, and my off duty "retired" weapon. Never failed, but had all of the internals along with NS done by Kahr. It came back with the internals "even the barrel" polished like a mirror. I went and fired 6 mags with 7 types of a mix of ammo , with no stoppages of any kind. The gun is dead on target. It easily shoots 3 inch groups at 25 yards. I need my glasses on to do that, but it's a smoking hot little gun, I have had and still have the XDS, shield , Glock 26, "which is almost as easy to hide than the 43", if you are big, "I don't mean fat" just man sized. I also carry a 19 or a 30S in FL, so if I can do it, you can also.

[@jizzythefroggy1108]

I agree but mine is the CM9 version.

[@FyrFytr998]

It’s amazing what can change in a couple years time. First Glock shows up late to the single stack party, and now Sig shows up sporting a 9mm double stack that’s smaller and holds more ammo than any single stack on the market. Personally, I’m trading in my G43 for a G26. With so much newfound love for Pistol Caliber Carbines that take Glock mags. It makes more sense to streamline that platform for me, as that’s my next rifle purchase.

[@whiteyfisk9769]

Yea..but then you have to own a Sig....

[@PlugNuster]

I love your videos, and always enjoy your concise evaluations of guns. When it comes to concealed carry of a subcompact, I do carry my G43, but continue to go back to the G26. Though it's a dbl stack, it simply disappears under a cover garment or t-shirt. I find that my G43 spends more time in the safe rather than on my side. Maybe it's just the 10+1 vs 7+1 (with Taran base plate).

[@DWbodhi]

Thanks Chris. You really do the best reviews.

[@LuckyGunner]

Thanks!

[@TheSoulMan11]

I like the glock 43 mostly because the size and it being glock. People say glocks are ugly but hell I love the look. The glock 43 is a great carry weapon for me most of all because I dont feel it on my side. Its great that I can also carry on my motorcycle and its not bulky at all.

[@araknidude]

I wish I could say I liked Glocks; I also wish I could say I hated them. I have a serious love-hate relationship with the design.

[@RojerLockless]

Super ugly.

[@squalonero737]

I’m a 1911 guy but I love Glock 43 and that’s what I carry on summer time all day.

[@JohnDoe927]

What other folks call "pretty" guns look gaudy to me. Make it look simple or don't worry about the look because it's hella functional.

[@PoeOutdoors]

Great series on the G43. I love mine and carry it daily with the Pearce 43+1 extension. The extension has been 100% reliable, looks stock, fits the hand nicely and gives me a 7th round in the mag without much added grip length. I like the Shield also but the 43 is also more concealable AIWB than the Shield. And I'm also a Glock guy.

[@frosty0419]

Poe Performance still having good luck with pierce plus 1. I just installed on my 43

[@PoeOutdoors]

Never had a problem with it.

[@rparker2732]

Pearce PG-43+1 are amazing, they've always been 100% reliable. You can go back to the early G27 Pearce grip extensions. Pearce is the unspoken Official OEM Glock Perfection!!!

[@MindYaBizz_Whiz]

Dude...your videos are great.

[@theazz28]

great vids guys !

[@sweetcostarica]

BIG thank you for the heads up about Taran Tactical XP springs. My Glock 43 does FTF with them & not with the factory base pad/spring. On my Glock 43 it's trigger is great! It groups well. I was surprised at the accuracy. On my Glock 42 (.380) it's trigger is stiff, not so good (yet). Weird.

[@Graimthu1]

Taran Tactical does NOT provide an "extra power magazine spring" with its +1 base pads. When inquiry was made to Taran Tactical as to what the failure to feed failure rate was with their tests, they declined to answer. Not a serious product for EDC.

[@maxwellmusick]

My consensus from everything I've read on forums and KZbin is your better off staying with oem regardless of brand of gun or baseplate. Better safe than sorry when it's go time. Thanks for the info BTW.

[@rodneybooth4069]

Used the stock spring on the Strike +2 extension on both my 42 and 43 and no trouble with any of the ammo on either gun. The ghost connector helps on the 43. The finger eating trigger on the 43 will make you look for some kind of trigger relief.

[@OnEvenKeel]

There is so much good about the Shield. But, the grip felt boxy (note the shape in relation to the Glock's grip) in my medium-sized hands and the Glock 43 so much better. Also, after just 50 rounds through the Glock, the factory trigger smoothed out nicely and creep virtually disappeared.

[@jameswilson3221]

I seriously cannot believe the part about people adding a +1 or +2 base pad to the FACTORY magazine and using the FACTORY spring and still complaining about reliability issues. If the factory spring was made to push 6 rounds into a chamber it will not magically push another 2 just because you say so. Great review BTW this comment is not to you, the channel, but to people doing so...

[@DAP-1776]

Love the vids I'll buy ammo just to support

[@LuckyGunner]

+dave passarella Thanks!

[@The-Homecook-0000]

I keep everything on the gun stock,I'm sure Glock got it right I have faith in that company,I have 1000 rounds threw mine not 1 jam I'm happy with performance for my carry gun....good video...

[@walterhwhite109]

Danny Di Agreed

[@donmelbouchard]

Agreed. Shot several hundred rounds now, various manufacturers, with no malfunctioning.

[@jackbauer5511]

I really love my PPS M2. It is reliable, shootable and easy to carry. I wish trijicon made night sights though.

[@jakeruth9221]

I tried the Pearce plus one. It stinks! The last round in to make 7, jams into the mag front as it nose dives down...lousy...Sold them. As far as the trigger...I pistolsmith and the only thing this beauty needed was the Ghost Self defense connector !! It smoothed it out and reduced it to the perfect weight. Just like my 21,19,26 now.....AWESOME this 43 is !! USA made one I got. GLOCK ROCKS

[@mytquin7605]

the glock store sells complete 43 mag with plus 2 extensions installed but uses the factory springs. i asked them via phone and they claim no issues but they also offer the extra strong spring separately. i like the fact that taran tactical automatically uses the stronger springs !!!

[@deez2glocks]

excellent review, just received my TT+1 and it did not come with a power spring so I ordered a MG power spring.

[@pancho4659]

That trigger is definitely not as "good" as a 26's or any of the bigger glocks but it makes it a little safer in the hands I think..maybe Glock made it stiffer to account for negligent discharges?..Iuno I can shoot it pretty well, and although i prefer the handling of the 26 I end up carrying my 43 the majority of the time...It's just sooo much slimmer. I have both and there's a substantial difference IWB. Fantastic videos btw; crisp and to the point...I like it.

[@TheSoulMan11]

my glock 42 had some feeding issues, probably the spring and glock customer service was great.

[@r.m.cortez8178]

I wanted to buy the glock 43 until Texas allowed open carry. So even though I never open carry, I don't worry nor mind about the little bit of printing that occurs.

[@JohnDoe927]

I live in one of the "People's Republic" states and, while I'd love to carry a full sized pistol and call it a day, concealment is my top priority so I don't freak people out while keeping everyone around safer.

[@marksmith351]

Hey Lucky Gunner, great job on your channel. You look & sound like a pro. Any chance you'd do a review on the MagGuts for the g43?

[@LuckyGunner]

I might give them a try, but probably won't dedicate a whole video to it. Possibly on our blog or Facebook. For what its worth, I've had good luck with the mag guts kits for the G42.

[@tjscrivner1841]

I run the 10 round pro mags with my 43 they work great 👍

[@mattbocko2096]

Taran Tactical sells the +1 extension without the stronger spring. My understanding from the review is that you experienced failures to feed with the +1 as well. Is that correct?

[@nathanyoung4304]

One issue I noticed with the G43 is how the factory mag does not always drop free, I usually have to flick it out of the magwell. Thought about a Taran baseplate just for the added weight to drop the mag better.

[@TheAlice1865]

My Glock 43 has functioned perfectly with all bullet weights and types I havd used. I have not changed a thing. My Glock is still the way it came from the factory. Upgrading a firearm does not always make someone a better shooter. But if you are some that needs to change things to shoot better that is fine too. Upgrading any gun to me is just personal preference it is not necessary for good fuction and accuracy.

[@marvinmarvin8478]

Great review, i just subscribed.. How would you compare the 43 trigger to the 26, or 19?

[@bankaydin]

The Ghost PRO trigger bar (not the Edge) absolutely removed the G43's back wall. I shoot 12" steel plates at 100y with my G43.

[@MyCatCarriesAGlock]

I've had the exact opposite experience with the TT basepads. But only the +2 ones. When I added the extra power spring, reliability actually went DOWN for me, even using 115gr FMJ. The spring is so stiff that when all 8 rounds are in, sometimes the last round is slightly up on top of the lip of the magazine and nosedives right into the feed ramp when feeding from one in the chamber. Action locked back and it functions 100% though.

[@LuckyGunner]

Try leaving it fully loaded for a couple of days. The spring tension will loosen up a little.

[@MyCatCarriesAGlock]

It's been loaded with carry ammo for a while now. Like I said, from slide lock it's okay. I'll do another function check this weekend maybe and see if it's worked itself out. Got the yellow Trijicons on mine.

[@StancePunk]

Magguts makes springs and followers that make your standard magazine 7 rounds instead of just the 6. No magazine extension needed.

[@wv_shooter9618]

great channel awesome videos man. what color are the base pads you reviewed?

[@LuckyGunner]

+atomic_killr Don't remember. Grey?

[@SP3NTT]

best firearms channel

[@josephsewell3006]

Glock used the same 5.5 pound firing pin spring in the G43 as the G19. The firing pin is shorter in the 43 meaning that spring is under more pressure. This causes a heavy trigger pull and some have reported around 7-8 pound triggers. The solution is to replace with a quality reduced spring. Installing a 4 pound firing pin spring will bring it down to about 5.5 pounds. Right where it should be. This will not effect reliability due to that spring being under pressure. This means that 4 pound spring is coming in at 5.5. Replacing the connector is not necessary in these newer 43s. After replacing the spring I've ran around 500 rounds through and not had a single issue. The trigger is much improved and still reliable.

[@MrPOPICHILO]

Cool. thank you

[@Bill_N8BIZ]

I love my Glock 43 with pearce +1 extension, no problems at all

[@ericjdevops]

Hello, have you tried the Kahr CM9 yet?

[@user-eo4ps7re5e]

Is that the titanium grey color? I really like it.

[@toyfoxokey]

I contacted Taran Tactical by email and asked about the +1 extension and the upgraded spring. I was told that the +1 extension did not require and upgraded spring and they would not provide one with an order of the +1 extension.

[@Zalathorm]

+Okey Akers I also got this same information

[@treymcgriff6086]

This is is a great channel. And the comments from the viewers are polite, respectful. People are actually exchanging ideas. Wow. Your presentation is top of the line. My only "complaint" is the money you cost me. I bought the Beretta 1301 after watching and considering the ups and downs from part 1 and part 2. What a great piece of gear. Please keep them coming.

[@LuckyGunner]

+Trey McGriff Thanks! And sorry about your wallet (but not really).

[@davemarkel9392]

Johnny Glock can take care of that trigger and make it how you'd like. He is the Glock trigger wizard!!

[@coryballinger85]

Your videos are great. I dont know why your channel hasnt grown since I subscribed but I'm staying all the same.

[@LuckyGunner]

Thanks! We're growing..... gradually.

[@coryballinger85]

+Lucky Gunner Ammo Hey your the first KZbinr to respond to me :) I really like your part vlog part shooting footage style of your videos. Also your animations and transitions are some of the best in the gun section of KZbin.

[@LuckyGunner]

+Cory ballinger I told mom film school would pay off!

[@bunnystew]

I'm very glad I forced myself not to snap purchase this gun as soon as it came out. After putting 200 rounds through one, I can safely say I prefer the Shield in almost every way.

[@dcwaku]

Were you having trouble with the +1’s ? According to Taran’s website, the +1 works with the factory spring.

[@roberttaylor619]

HEY BUDDY I REALLY LOKE YOUR VIDEOS.I GOT THE +1 TARAN FOR THE 43 AND CANT GET THE 7TH ROUND IN .ANY SUGGESTIONS

[@Glockshooter09]

I would say from my experience the issue is not the trigger but the thin different grip which causes a different pull with your trigger finger. I could not get consistent with it either and ended up selling it

[@rodneybooth4069]

+Glockshooter09 .What's your opinion on the 26 with the wider grip?

[@cHuRrOiNtHeWiNd]

“Jerkin shots, off target”

[@nickdoeseverything431]

I got a +2 extension from Strike Industries. It is really nice, and I love the grip it gives me over the stock mags, but I'm wondering where I might find a better spring. I have only had the gun for a few days, so there haven't been issues yet, but I anticipate it is likely to happen. Any recommendations on where to find a better spring? Thanks!

[@LuckyGunner]

I believe you can get an extra power spring from Ghost Inc. Not sure if it will work for you though.

[@rodneybooth4069]

+Nick Been using the strike +2 with the stock spring for sometime and no problems yet. Just added up the count and it's 860 rounds including the 115grain Tulammo, 124gr HST, (but not many HST,sky high price)but most 115gr ;Blazer aluminum. This was the G43. I like the pattern,;it comes close to matching the stock grip pattern.

[@NorthernChev]

Why are there so very few videos out there on the Glock 48? I love my 48, and can't understand why more people haven't gotten on board.

[@AK-ky3ou]

On the taran tactical +1. Did you have problems and upgrade the spring on the +1? I see they ship with a spring on the +2 variant but not the +1. Thank you

[@johnprice8201]

Like you vides very much. This is a little off subject but are you still with the M&P 9c as your go to carry? I am considering getting one based of your recommendation.

[@LuckyGunner]

+john price I'm currently carrying something else for the purposes of future reviews, but I would still recommend the M&P9c without hesitation.

[@Hello_its_me_mario]

hey I have a m and p 40 shield it's having feeding issues only 300 round in it so far. can it be that the bullet is to heavy. what grain should I use

[@thelos8093]

3:20 failure to feed? Stove pipe?

[@MDeJo27603]

What appendix carry rig is he using in the video?

[@mrapple3702]

The Glock 43 is certainly on my wish list.

[@TimBucktooy]

How well do the ETS Glock 43 magazines work?

[@biffdinkley3870]

Chris, did you ever have any feed/fire issues with the Glock factory mags, or did you go straight to the Taran mags?

[@LuckyGunner]

No malfunctions at all with the factory mags. Don't know the exact round count with factory mags vs. modified, but probably 50/50.

[@lynnmckenney1987]

How does the glock 43 compare to the sig p938?

[@Bam-BamMoore-zz2vk]

How do you feel about the after-market add on rail for the G43 for those of us that want a light for our EDC?

[@yourfavoritewelder3162]

No need. Get a streamlight tlr6

[@rncondie]

I have the hardest time not shooting left with my Glock 43. I also own a Glock 17 and I am dead center with the 17. I found with the 43 I must grip hard with the left hand and relax the right trigger hand to bring those shots closer to center but I still shoot left. I owned a Shield and didn't shoot near as left as my Glock 43. Russ

[@LuckyGunner]

+Russell Condie The trigger is stiffer on the 43 than the 17. Lots of people are reporting the same issue you're having

[@tony21084]

Any word if there will be a extended 10round mag? Man ive been wanting one even if it has to be after market 10rd mag

[@LuckyGunner]

No idea on that one. I'm not sure I'd trust a 10 round mag since that's so far from the original design. It would also significantly extend the length of the grip, to the point where it would make a lot more sense to just carry a larger gun.

[@omicrondec]

Fernandez for range use, that'd be great.

[@lyftedgamer5776]

I got a 5+ extension from Glock with the 43x (;

[@ERICGRIMEY1]

43 baby

[@TheModernNeanderthal]

Have you had any time with the PPS M2? If so, how would that compare to the G43 and Shield?

[@LuckyGunner]

Saw the PPS M2 at SHOT. Really like the changes. I'm planning to do a review later this year.

[@joerasberry2586]

What color version was this plus 1 tartan tactical base plate in this video? They have two black versions and a grey. I just noticed it went very well with upper piece and would like that color

[@LuckyGunner]

+Joe Rasberry Grey... I think? I don't remember having color options when I bought them.

[@RonR31]

I bought a couple +1 TTI extensions for my G43. It's hard to chamber a round once I insert the magazine fully loaded with 7 rounds. Did you have any issues?

[@LuckyGunner]

+RonDOG Load up the mag and leave it for a few days. It will get easier.

[@DeusRegum]

2022 update: My Glock 43 I just bought from Sportsmans WH, has an average trigger pull weight of 3.14 lbs. That's crazy. I had to triple check it and perform function checks to make sure there wasn't any malfunctions going on. Maybe I'm lucky? But damn, 3.14 lbs average is insane! Since the trigger pull weight was so light, I did not want to mess with the trigger and just upgraded my slide and barrel to a Zaffiri Precision ported slide and ported barrel with a 507k mounted. I still am surprised by that stock glock trigger though. Maybe Johnny Glock snuck into their factory for one night? LOL!

[@MrNako690]

What do you think of magguts.com for the glock 43 ?

[@LuckyGunner]

Dunno. Haven't tried them.

[@gcdiver]

Compared to the PPS M2, do recommend the Glock 43 or PPS?

[@LuckyGunner]

+gcdiver I haven't shot the PPS M2 yet, but plan to review it sometime this year. If the M2 shoots as well as the original PPS, I suspect I will like it better than the G43, but that's purely a matter of subjective preference, and not a knock on the G43.

[@danfarrell8958]

I just got my 43 and I agree with you on the trigger but I like it otherwise.

[@PartTimeJedi]

I seem to carry my M&P Shield with more ease. Plus I shoot it like a pro compared to my Glock 43.

[@seanvine39]

Yep...i shoot the Shield too, but I carry the 43 more. It's lighter, smaller, and in a defensive situation, the fact that I shoot the Shield a hair better isn't going to matter much. Especially at typical defensive distances.

[@janreeves5443]

Did you try the Pierce Grip +1 Extension?

[@LuckyGunner]

+Jan Reeves No, it was not available at the time I did the review.

[@rparker2732]

Best option Pearce for +1 extension or even extension without additional magazine capacity! Taran +3 with 10% spring is also a good choice based on my experience. With three mags I carry two with PG-43+1's from Pearce and one Taran Tactical +3 in flat black.

[@craftsmanofjustice6811]

Why the Springfield XDS is not on this list? (of best single stack, 9mm, concealed carry options) Can you give me your honest opinion? What is your opinion about it? have you owned it? I have one, but I am evaluating other options.

[@LuckyGunner]

I have witnessed more problems with the XD line of handguns than with other similarly priced modern polymer pistols. This is consistent with what professional handgun instructors have told me they have witnessed in their classes as well. The grip safety in particular seems to be a weak point in the design. The XDS is not as problematic as some of the other XD pistols because the slide does not lock in place if the grip safety is not engaged (big problem if your grip safety breaks and you've got a round chambered that you can't remove). Realistically, most XDS pistols will end up working just fine, but I believe they are more likely to fail at a greater rate than the Shield, G43, and PPS (all of which are also subject to occasional malfunctions and parts breakage too, just to be fair).

[@craftsmanofjustice6811]

Thank you for your honest opinion and thorough explanation. I have had the XDS for aproximately 2 months only, and have shot about 600 rounds only. No malfunctions so far. Will see in the future. It's my carry weapon. I also have an HK P30SK, and a S&W Bodyguard. I find the HK to wide to carry in a summer weather all-year round in the Caribbean and with my usual office clothes (that's why I looked for a single stack), and the Bodyguard... well.. it's a 380 caliber. I got my hands on a Shield at the gun shop, and what I don't line about the S&Ws is that when you rack the slide, they sound too much, as if there were loose parts inside, or not as smooth as other pistols that I have. The construction seems to be cheaper in my opinion. That's why I didn't buy it. Thanks!

[@MrJosealago]

in almost 3 years I never have any problem with my XDM

[@jonhyboy12playsdrum]

What are your thoughts on the XDS 9mm?

[@LuckyGunner]

It's not bad... maybe. But I'd suggest the G43, M&P Shield, or Walther PPS first. I like the way the XDS shoots okay, but I've seen more reliability issues with Springfield pistols than with any other brand except possibly for Taurus. The XDS appears to be slightly better on average than the larger XD and XDm pistols, but it still wouldn't be close to my first choice for a pistol in that category.

[@jordanwiser9011]

Guys what he really means is the guy from taran tactical called and said he will give you 5 grand and not sue for slandering his product

[@208SledHead]

Any thoughts on the XDs from Lucky Gunner??

[@LuckyGunner]

+Uncle Deez It's not bad, though I'm not a fan of the XD series in general. That's not necessarily an objective assessment, but I've seen many of them fail, and full time instructors I've spoken to have witnessed frequent problems as well. That said, the XD-S seems to have a better track record than its larger counterparts, and it's got a decent trigger out of the box. It's a bit over priced compared to the competition, though.

[@208SledHead]

Lucky Gunner Ammo I greatly appreciate your thoughts man. Thank you very much!