GOLD from optocouplers and power transistors smelting

[@SURFEAMORETERNO]

The best of your work is in the way you improvise tools, equipment and some containers. Here I also make with what I have on hand. A hug.

[@julianalcorso5703]

Another good one OWL!! 10/10 for metallurgy and chemistry. 10/10 for production and content. I am even getting to like your music. Keep up the great work!!

[@arnedalbakk6315]

Hello Mr Owl. I enjoy this clip 🙂 Thank you from Norway 🌹

[@OwlTech333]

Glad you enjoyed it!

[@knowldedge5012]

After IC incineration you did not wash just added the lead?

[@OwlTech333]

Yes

[@ismailhakkkaratepe8161]

Hi, i dont understand how the lead has extracted from the melted dore? Please can you explain.

[@OwlTech333]

it was oxidised to litharge and removed with the slag, google cupellation

[@ismailhakkkaratepe8161]

@@OwlTech333 thank you very much

[@ismailhakkkaratepe8161]

What music is playing in this video, between 00:50 - 09:13 minutes?

[@OwlTech333]

soundcloud.com/owl-tech/something-big?

[@ismailhakkkaratepe8161]

@@OwlTech333 thank you

[@TheDurdane]

Great video! I assume these transistors where all T03's? And that you cut them open with an angle grinder. And only use the die and the bondwire of it, is dat correct? And do you perhaps know the total weight of the 1500 transistors?

[@OwlTech333]

That's correct I was given only the dies of the TO-3s to process, so I don't know the overall weight.

[@بشيرهويديأحمدبشير-ر4ت]

هل يمكن صهر القطع ألتي تحتوى البلاديوم في الفرن مباشرة وشكرا جزيلا لك ونرجوا منك التركيز على الطرق البدائية بدون الأحماض

[@OwlTech333]

يعتمد على المطرقة ، إذا كان يمكن الوصول إلى درجة الحرارة هذه

[@بشيرهويديأحمدبشير-ر4ت]

ما هي المطرقة وشكرا جزيلا

[@OnsloVest]

Brilliant! Cheers for the effort guys! Can’t wait for the next one

[@OwlTech333]

Thanks for watching mate, many more to come!

[@phillipcooze7668]

You're name sounds Welsh

[@chosen1one930]

Why are ceramics able to go into the crucible right away and the plastic ICs had to be incinerated first? I have no experience with processing material like this besides for watching your videos. Just thinking about I'm guessing the plastic would melt into one piece fucking everything up, but that's only a guess. Have a good week and be safe

[@OwlTech333]

that's a good guess :) I wont be able to see if all plastic is gone which will lead to much longer holding times

[@kaiseredge]

I don't use the smelting technique to make the dore often but I am curious do you lose any gold to the slag with the sodium hydroxide at high temp? also how do you dispose of the slag? i'd assume it is like cupels and absorbed some lead? or does the mass amount of carbon absorption keep all metals from oxidizing?

[@OwlTech333]

Gold could be lost trough mechanical enclosure in the slag when the slag is not viscous enough, sodium hydroxide helps with slag thinning. I don't dispose of the slag, it can be remelted over and over again, or it could be converted to metal, with reducers.

[@davyoyon5508]

all type of ic optocoupler have a gold inside? sorry my bad english

[@OwlTech333]

Don’t know about all but these ones do

[@recicladoradelsurpinto562]

Super nice👍how can i get rid off paladium from gold solution dont have dmg or formic acid ? Need help the solution has gold and paladium an a bit off silver

[@OwlTech333]

You can use sodium nitrite or oxalic acid

[@rightvideos5057]

Can You explain how you made the forg burner is it gas or charcoal burner Pls show the forg burner on video it will help full for me pls👌👌💐

[@OwlTech333]

kzbin.info/www/bejne/haSvnIaBa9mAotU

[@Shaes6334]

How is it possible to sleep in soluble water after SMB?

[@999DusanGoldrecovery]

Exelent!

[@OwlTech333]

Thanks!

[@chosen1one930]

Always good to see a video from you, hope you're doing well

[@mr.g-sez]

i think i already asked you but what are the titles of the two music tracks again?

[@OwlTech333]

m.soundcloud.com/owl-tech/tracks

[@ilmulogamdantehnikpelogama9569]

hello sir, is it possible to get Palladium this way?

[@OwlTech333]

yes kzbin.info/www/bejne/eWfCmYhuoNGZrqc

[@РусланБабух-щ9к]

Здравствуйте! ЛАЙК вам ✌️🤗. Скажите пожалуйста шо за порошок СМБ? И где он переминается! И скажите он пры осаждения золота тянит другие металлы? Спасибо большое 😉😁

[@varlov5523]

смб если не ошибаюсь это пиросульфит натрия. хотя незнаю зачем пишу если автор не отвечает.

[@OwlTech333]

Так точно!

[@varlov5523]

@@OwlTech333 люблю ребусы😂😂🙈

[@OwlTech333]

Na2S2O5 - sodium metabisulfite - SMB - пиросульфит натрия при осаждения золото тянит МПГ, поетому если они присутствуют в растворе должен применяться другие редукторы - нитрит натрия, щавелевая кислота...

[@РусланБабух-щ9к]

@@OwlTech333 спасибо большое 👍 я незнл шо пиросульфид так обозначают ☝️☺️

[@escrapchannel]

Fantastic result and video! 🌟 🌟 🌟 🌟 🌟 👍

[@OwlTech333]

Thank you! Cheers!

[@haidthaidr4725]

الستيل كان فيه اسمنت او لا

[@OwlTech333]

رقم

[@YukiNeko-Neko]

The was realy cool to watch. I Enjoyed it and gave it a 👍 Is that really worth it to reclaim the gold, as in the cost of time and chemicals needed?

[@OwlTech333]

Absolutely

[@alfredjanwadkar6429]

Hi Can you process 10kg gold plated pins? How to contact you and get it done?

[@yuryandy861]

Отличная работа, простенько и со вкусом 👍👍👍😁 и выход приятный 💪 наконец то понял почему азотная кислота концетрированная а не разбавленная...

[@OwlTech333]

Работает быстрее, и потом получаю кристаллы нитрат серебра покажу на следующий ролик

[@СтоунКарвер]

@@OwlTech333 серебро закупоросится,и всё будет супер

[@jamisontaylor878]

Excellent video as always thank you !!!! Congratulations 👏 🎊

[@OwlTech333]

Thanks for watching!

[@tortugakourosh6805]

Bonjour comme toujours un plaisir de suivre les vidéos vas me falloir le visionné plusieurs fois pour tout comprendre 👌

[@brianterifay6793]

Nice job, love seeing the shinny :-) 👍👍

[@Shaes6334]

Sir gold complete refined not what smb

[@МояДобыча]

Результат порадовал👍👍👍

[@OwlTech333]

Мне тоже :)

[@sgprecovery7184]

Hello sir what is de-NOxed and sulphemic acid why in use please sir answer me you very legend man

[@OwlTech333]

de-NOxing is the process of removing the free nitric acid from the solution, some people are using urea, some evaporate three times with HCl, some are using formic acid, I prefer sulphamic acid as it concerts the free nitric acid acid to sulphuric, which precipitates lead as lead sulphate if any is present. If you have an active oxidant in your solution and you don't deNOx the gold you precipitate will go back in solution

[@sgprecovery7184]

@@OwlTech333 thinks I am big fan

[@jeanbastien5513]

Combien cela a coûté de produit

[@Shaes6334]

What color is copper

[@OwlTech333]

brown

[@chosen1one930]

Just imagine how much precious metals are put into the ground every year because people just throw shit away at dumps, such a shame

[@damianstasek8946]

Thats why I recycle 😁

[@Shaes6334]

How to extract residual gold from SMB water

[@TheDurdane]

Do a stannous chloride test, you wil see that there is no gold left after precipitation.

[@АндрейОрловский-ч6к]

Извените увидел серебро если не сложно какая в данном случае пропорция свинца и серебра на этот объем

[@OwlTech333]

Ag:Pb 1:5-10

[@haidthaidr4725]

سلام عليكم الدقيقه ٧ كان القرص فظه او ذهب او رصاص او ذهب

[@OwlTech333]

Ag+Au

[@hayderalkhafaji8408]

Great job, well done sir

[@OwlTech333]

Thanks!

[@بشيرهويديأحمدبشير-ر4ت]

هل يمكن وضعها في بوتقة اسمنتيه

[@OwlTech333]

Yea

[@بشيرهويديأحمدبشير-ر4ت]

شكرا جزيلا لك

[@BullProspecting]

Great work as always!⭐⭐⭐⭐⭐

[@OwlTech333]

Thanks again!

[@rightvideos5057]

I tried this method today i added 3kg lead and 50 gram silver for 3kg gold contain material finally i got 500 grms melted lead I have tested in computer machine it shows 21k gold present in this lead metal Now how to remove lead from this melted metal before dissolve in nitric Can you explain pls

[@gaz21lit]

You should to oxidize lead. Do it with cupellation and oxygene

[@OwlTech333]

kzbin.info/www/bejne/jnvIZohmobSZn6c

[@luiscosta4973]

Exelente proceso,y muy bien explicado👍

[@АндрейОрловский-ч6к]

Хай возник вопрос диски не метал вроде молибден почему он не сгорел

[@OwlTech333]

Не растворяется свинцом

[@jamisontaylor878]

Amazing now that's a button 👏 excellent video thank you 😊

[@OwlTech333]

Glad you liked it!

[@SocratePrimusSapiens]

Heya ! What a great result again ! It's still too cold here to start recovery season and i feel impatient to begin. People can't imagine the time we spend on finding and preparing the ore... A question : Is it a home made crucible your are using in that vid ? Prices of all needed component to work are getting higher and higher as inflation grows... Do you feel the same dream as precious metal's prices will explode this year ? Whish you the Best. GodBless you.

[@OwlTech333]

Hi there mate, always happy to read your comments! Regarding the crucible - yes it's DIY :) crucible bottom of a natural gas cylinder (mild steel)

[@rightvideos5057]

What is the thickness(Gage) of steel sheet 1mm (or) 2 mm

[@OwlTech333]

@@rightvideos5057 2.5mm the stainless steel sheet the one used for crucible is about 5mm

[@varlov5523]

доброго здравия. сейчас посмотрим что Сова приготовил.)) благодарю за видео😊😊

[@OwlTech333]

Спасибо за просмотр!

[@varlov5523]

@@OwlTech333 вы же знаете это не трудно, трудней донести полезную информацию.) удачи.

[@joek511]

Nice button. Hope you wore a respirator, You just put a load of lead oxide into the air

[@OwlTech333]

We did wear respirators

[@ProspectorTripp]

Nice work sir Thanks ✌️PT

[@OwlTech333]

Thank you too

[@blacklabelonthebedrocks]

Great result!

[@OwlTech333]

Thanks!

[@romanpankin5412]

Сова фантастический результат! Лайк за великолепную работу! Интересно за счет чего такой выход? Транзисторы обычно 30мг это с количества 45г,22г с микрух это 5 мг в одной,всегда считал что в таких 2мг.

[@OwlTech333]

Спасибо! Микрухи 0,007г Транзисторы 0,018-0,025

[@CesarMartinez-f2n]

Impresionante el sistema de purificacion 👍

[@OwlTech333]

Thank you!

[@davidgustavomacedo1038]

Parabéns pelo trabalho e talento owltech.

[@OwlTech333]

muito obrigado

[@PoorMiners321]

very nice i like gold button good job idol..

[@OwlTech333]

Thank you!

[@Detalius]

Привет, процесс интересный, навеное трудозатратный но стоит своего!

[@OwlTech333]

Привет! Наоборот процесс самый быстрый из тем которые я знаю, все закончилось за около 5 часов

[@Detalius]

@@OwlTech333 Я такой способ не пробовал, но итнересно а мосты от пк тоже без потерь обжигать можно твоим способом.

[@OwlTech333]

@@Detalius Пока не пробовал, но уверен, что будет работать как с оптронами, так и с процессорами, завтра жду приезда партии 10 кг мостов и сниму процесс.

[@ivsongold322]

Very good 👏🏾👏🏾👏🏾👍🏾🇧🇷

[@OwlTech333]

Thank you!

[@arnedalbakk6315]

Hihi. Yes it wat bad🌹Nice gold sir

[@OwlTech333]

Thanks for watching

[@konradthomas2135]

wieder mal ein sehr schönes video

[@OwlTech333]

Vielen Dank für Ihre Zeit!

[@Andleika]

Красавчики. 👍

[@РусланБабух-ю2м]

Транзюки дали результат в основном! Но думаю что потери есть как грама 2 точно 😊

[@tawnihaynie1065]

Great video. Thank you. Please take care and stay safe. Talk to you later my friend. 🙂🙂🙂😇😇😇👍👍👍

[@павел-р1б5н]

the disks from transistor made from molibden

[@1lt3r]

Най добрият.

[@OwlTech333]

Благодаря!

[@1lt3r]

Можете ли да говорите на Български език?

[@OwlTech333]

@@1lt3r с Google translate мога да говоря на всички езици 😊

[@bormisha]

Thanks for posting! The background music is so annoying, though, that I had to watch it with sound turned off.

[@OwlTech333]

Yeah I know its time to change it

[@spencermaiers8322]

I just love the music.

[@d1echannel816]

very good

[@MiguelSierra]

Muy bien.

[@coballo5226]

Fantastico

[@ADVOKAT163]

👍👍👍👍

[@shanejohns7901]

~$4400ish

[@mrssukmini3298]

Jast feri goood master

[@arnedalbakk6315]

Not bad 🌹

[@mamoisri3212]

I am follow your video from 10 years ago and still can't produce gold button,,😂

[@OwlTech333]

This doesn't speak well of my videos 😂

[@rickysmallwood6670]

Yeah that what I'm talking about,

[@АндрейОрловский-ч6к]

И как изготовить такую печь хочу научиться вашему искусству

[@OwlTech333]

Какое искусство, это самы древней аффинажный процесс

[@OwlTech333]

kzbin.info/www/bejne/haSvnIaBa9mAotUsi=9MYXmOsH-Xzw-ojj kzbin.info/www/bejne/Z4bJloqZbdlnj9Usi=s09w-76o-TOm1vcj kzbin.info/www/bejne/eWfaenyBqdiLitUsi=n-fhMzUdXJZYNFQ4

[@АндрейОрловский-ч6к]

@@OwlTech333 спасибо большое за ваши ответы

[@بیفی-خ3ص]

❤❤❤

[@idiotshan7418]

Extraction

[@Паркер-и7л]

Holy fuck! Nice !

[@ilikechamp3086]

공유 감사합니다

[@Amac-uz9hm]

Video 👍 music 👎 sick of hearing it now very old, however a good job boys 👌

[@ismailarslan166]

Tebrikler.

[@менқазақпын-в8р]

👍

[@ПочинилкинТВ]

👍👀

[@Shaes6334]

Stannous Chloride after smb the color becomes brown

[@OwlTech333]

copper

[@phillipcooze7668]

Think pink Floyd music wd sound better Great video though

[@mahmmud980]

good

[@АндрейОрловский-ч6к]

Что означает порошок смб и в ролике я не увидел серебра

[@OwlTech333]

Пиросульфит натрия

[@ilmarzeiger729]

🤗👍👍

[@فوائدوعبر-و7ف]

هذا نحاس أصفر... وليس ذهباً

[@OwlTech333]

هذا هو التعليق الأكثر سخافة على الإطلاق! من الواضح أنه ليس لديك حتى فهم أساسي للعمليات المعنية.

[@فوائدوعبر-و7ف]

@@OwlTech333 من الواضح أنك افهم واحد في العائلة عندكم في الأساسيات المعنية...

[@riadbleibel8902]

عملية معقدة بدونها

[@Scandinavian_Pride]

Almost like cooking wack 😆 or recooking

[@AbdoMarouf-gx1gb]

ما شاء الله

[@haidthaidr4725]

فيديو راىع

[@OwlTech333]

شكرا سلام و صحة

[@azizekurtametova7250]

Привет удачи и здоровья

[@arnedalbakk6315]

I think.. Hm... 98-110 gram🙂

[@любительсломатьтехнику]

Привет. Ни хрена не пойму, материал советы. Ты кто?

[@OwlTech333]

Привет! Я свой!

[@andrzejbrzozowski7948]

O

[@hidayattv7894]

👍👍👍

[@shaneyork300]

👍