GRAPHENE COATING by GlassParency! The Future of Paint Protection!

[@PanTheOrganizer]

⬇🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇⬇ 🇺🇸 For people in USA: GlassParency graphene coating: www.glassparency.com/pan-graphene/ GlassParency graphene coating on Amazon: amzn.to/3NflJl1 Adam's Strip Wash: amzn.to/2YqGDoK Microfiber wash mitts: bit.ly/3lZ5AkH Optimum Ferrex (iron remover): bit.ly/2FHvE4c Clay towel: amzn.to/34lnrfV Clay lube: bit.ly/2CPxMFN Paint polish: bit.ly/2AANUJM Dual action polisher: bit.ly/3mfmZ91 Polishing pads: bit.ly/3kgZrQc CarPro Eraser (paint prep): bit.ly/3m2gzJZ Microfiber towels: bit.ly/2IDL9LA 🇨🇦 For people in Canada: GlassParency Graphene Coating: bit.ly/3yjBQGR Adam's Strip Wash: bit.ly/2E95SFs Microfiber wash mitts: amzn.to/3j6EiHo Optimum Ferrex (iron remover): bit.ly/3l7jNw6 Clay towel: bit.ly/2FQ2v6R Clay lube: bit.ly/3hxokpL Paint polish: bit.ly/2QhkhBD Dual action polisher: bit.ly/2BchZjk Polishing pads: bit.ly/329undu CarPro Eraser (paint prep): bit.ly/3j4x07h Microfiber towels: amzn.to/3aJKWAG

[@patrickmatini5920]

Pan TheOrganizer hi like your channel, my question is why put on the booster every 3 months on the coating. I think this product is BS. Your just out there to sell.

[@thomasjoaquim4583]

TOP !! Mais 144 dollars pour une livraison en France... 150% du prix dans la livraison.... Quel dommage!!! Pourquoi ne pas proposer une livraison plus lente que UPS mais plus économe?

[@Allo_ere]

Hey Big fan of your work Is there anyway i can get this product to India. Looking forward to hearing from you.

[@Bezzle.]

Do all these bottles say, “1 of 250”? Because my bottle says “1 of 250”.

[@beejay8719]

@@Bezzle. mine does as well.

[@EchigoyaHonpo]

I really would like to see some endurance test on this product.

[@tsnoopmateoca650]

Graphene is one of the best discovered materials with so many applications. Been following Graphene for the past decade and I’m excited to see it in the automotive detail industry

[@chadthiem8371]

you had me at pan the organizer 😂🤣. absolutely appreciate how much information you pack into your videos without overwhelming the mind. you take time to go through and make both us and canada list and for me living in the US makes it tons easier. can’t thank you enough for everything you review, test and demo.

[@PanTheOrganizer]

Thanks Chad! I appreciate the feedback!

[@Hyabusa8]

I waited a little while before buddy and ended up with a lot of high spots. Was disappointed in his misinformation. Clean it as soon as possible .. definitely don’t wait 2 mins to buff it with a clean microfiber towel. Fixed the high spots with a cutting pad and polish.

[@M31410]

@20:10 A graphene (Adam's, Artdeshine, Ethos, GlassParency) battle would be great.

[@detailpeoria]

Probably all the same stuff

[@MrsTomlinsonols]

@@detailpeoria Artedeshine/SPS has had a graphene coating since 2018... The others, not so much

[@janniezbedny985]

ArtDeShine Graphene Coating is ceramic coating. This coating is strengthened with graphene oxide. Graphene is not a base of product

[@motomarcel1]

So what’s the best graphene coating?

[@stacyruiz62]

I know this video is a little old but I just finished applying this and all I can say is WOW. Easy to apply and the shine is unbelievable.

[@PanTheOrganizer]

Good choice Stacy!!

[@MrKeenan3325]

How’s the coating holding up after 2 years. Thanks!

[@matthawrysko]

Just used this Saturday on my wife's car, followed your video instructions and the results are excellent!!! Glad I found this video. I bought their maintenance package to take care of the vehicle in the future. I also plan to do my truck and RV with it next spring!!

[@PanTheOrganizer]

Thanks for the feedback Matt! If you have an RV, watch my cool RV detailing video: kzbin.info/www/bejne/hXS4iHWYhcyobq8

[@soapa4279]

That water beading looks insane, very interested seeing how this holds up over the claims over time. Great overview!

[@johnmead3485]

Great job Pan! After I saw your Glassparency windshield video I had it installed on my 21 Model X a month ago. I’ve been so pleased I made an appointment to have the whole car treated with their graphene next week. I watch your tutorials but in this case I want a professional application.

[@PanTheOrganizer]

Thanks for the feedback John!

[@joespanier4703]

This stuff is great. By far the easiest coating I’ve ever applied and it has really good gloss. I’ll hope the longevity is as impressive. I used this on a metallic silver FJ. I’m interested to see what it does to my laser red F150.

[@MyGoToUserName]

How is it holding up a year later

[@T.E.B.R.U]

How is it holding up 2 years later?

[@alexblanchard2236]

Pan. I used this today on my wife's 2018 honda pilot after clay bar a quick polish and decontamination. Thanks for all your videos you post to the detailing community. It is truly ori less content. This stuff was a dream to apply to the car. It's so easy. Worth every penny. I still have enough to do my 2020 telluride even after 2 coats to the entire vehicle.

[@PanTheOrganizer]

I love the Telluride! Looks awesome. What color is yours?

[@thenotoriousrvh6091]

Graphene coating VS Turtle Wax Ice ceramic spray. $99 vs $15. That'd be an interesting apples & oranges comparison.

[@limmingjun7930]

Love to see that battle

[@mikehelinsky9685]

Agreed.

[@brandenlucero]

yeah, but one is in spray form and one isn't. So that's not a fair comparison compared to a ceramic coating in a small bottle that must be applied the same way.

[@limmingjun7930]

@@brandenlucero yeah that is why @Robert Van Hoy said like apple & oranges comparison. You know just curious

[@tanbirahmed5550]

Y not both 🤷

[@jordandixon125]

Was between multiple different coatings for my new BMW M340i on order. Decided to go with this coating since it was your 2021 pick for graphene coatings. The resistance to water spotting plus the long endurance, is what pushed me to this coating!

[@PanTheOrganizer]

Congrats on your new M340i! To inspire you, watch a video I made about detailing a brand new one here: kzbin.info/www/bejne/m6W7mX2Elqtje6c

[@tristianwhitaker6930]

curious to see what you think about the Ethos Graphene Coating🤔

[@TheChemoDoc]

Same though I had.

[@tristianwhitaker6930]

barry cook good to know. thank you very much for responding!

[@rdzed3505]

I had a full Paint Correction and SPS Graphene app done to my 2010 Tux Black F150 FX4, in January of 19 and it sheets water now exactly like it did the day I brought it home. Graphene is no joke. I also use it on my boat.

[@PanTheOrganizer]

👍🏻

[@slidetek]

"do not wash your vehicle for 2 weeks after applying" _Starts sweating and nervous twitch..._

[@Bbronson]

Keep it in a garage or covered for 2 weeks 😂

[@PanTheOrganizer]

LOL !!

[@JWL-UK]

Having to enforce the car and the pressure washer to socially distance for two weeks won't be easy!

[@GlassParency]

🤣🤣🤣 In all seriousness, a simple rinse paired with our Boost is perfectly fine after the first 24hrs after application. We just recommend that no products with detergent are used within the first 2 weeks of application.

[@arad.6711]

@@GlassParency If I have a brand new vehicle with 800 miles on it, do I need to decontaminate the paint prior to application?

[@marksoprano007]

Hi there Pan. Thank you for all the great videos throughout the years. Very high detail. You simplify a very intimidating factor to make people more comfortable in maintaining their vehicles.

[@PanTheOrganizer]

Thanks Mark! I love explaining things so that my viewers can duplicate these at home with confidence.

[@PBDi4]

Damn... That shipping price for where I live is double the price of the product :)) Oh well... Nice product, Pan.

[@phil-blog]

Ya, there shipping prices seem pretty of of whack. I'm not sure if their packaging is oversized or if they are just padding the prices, but their site is way higher than what UPS.com rates are :(

[@samuelwirstrom8103]

Glad you did this review. I'm really curious on Adams because more folks I know rave about it. Thanks for doing this review. Looks like I'll be doing this to my vehicle soon! I'll send pictures!

[@bobwantz214]

Could you please do a review on several Graphene coatings, especially since your getting paid by GlassParency for this review.

[@blueworm123]

Please I am not sure how this holds up with the others in the market.

[@bigdog44b4u]

Got my order on Friday and just coated my new 2020 Porsche Macan S. Black Metallic. Holy smokes does this product make the vehicle look amazing!! Did the treatment just as you described. Never seen a car so slippery or shiny. I am super excited to see how this holds up over time. Thank you for sharing this. Easy to use!!

[@bigdog44b4u]

I do have a half a bottle left over after finishing. How long can I keep this ? Want to do another car soon. Just don't want it to go bad.

[@PanTheOrganizer]

One year if stored in stable conditions (non freezing)

[@PanTheOrganizer]

Thanks for the positive feedback! Yeah it’s a pretty amazing product!

[@mattmerwin3842]

Already bought the graphene kit when you had the windshield kits. I can buy this limited edition now too.

[@barbara4944]

Paaaaan! Good morning! Was starting to get withdrawls from not seeing any new videos yet, then this popped up! Look forward to watching it!

[@PanTheOrganizer]

Welcome back!

[@JayDaddy_215]

I bought the complete set the last time you showcased their products which included the graphene coating but now there’s a pan edition included I just had to whip out the credit card again like always. Thanks pan! Love and support the vids as always 💯

[@PanTheOrganizer]

You managed to be among the first to order the PTO edition bottle? Sweet!! Hope you enjoy it as much as I did.

[@jaywang3]

Glad you mentioned water spot problems with ceramics. I've watched so many ceramic videos with no mention of it. Thought I was doing something wrong with me car. Def interested in graphene now

[@PanTheOrganizer]

:)

[@phenomxii]

nice product, price is ok, but 200 dolars for shipping to Slovakia is crazy !

[@GlassParency]

Unfortunately, we are running into the issues of other carriers loosing packages too often lately. We chose to use UPS because currently the most reliable. Email us at [e-mail] and on Monday I will see if there is anything better for your location.

[@patricksk]

@@paulmaria6747 huh?

[@MrSquinker]

Netherlands the sams

[@ahsanm.5905]

GlassParency you guys should have European distributors (within Europe) and keep the price controlled if you like to spread your product... just my 2 cents 🤷🏻‍♂️

[@patricksk]

I know it's not the same but believe Bratislava has a Chemical Guys facility. Might find something similar there

[@leonbing3698]

Hi Pan, blessings to you young man. I watch your videos, but i have been away for a bit. I applied a ceramic coating in Feb. 2020. I earlier this morning purchased Black Ice after watching your review of it over and over. But later in the evening after watching your review of "CP", I ordered it. I will use Black Ice on The wife's car, and neighbors vehicle. I enjoy your videos and your love for what you do, it causes us to really get into detailing our own vehicles! Stay safe young man! Bing

[@PanTheOrganizer]

Thanks for the feedback Leon! Welcome back and enjoy binge watching all the videos you have missed! I produced a lot of cool and original content lately, including unveiling my brand new supercar to my viewers!! :)

[@nsw72]

I'd like to see that Honda five years from now. 😎

[@barnellwilliams4721]

Just ordered mine, $15 shipping to New Orleans! Thanks so much for the review Pan, can't wait to enhance my Camry!

[@PanTheOrganizer]

Hope you enjoy it!

[@amill1563]

Pantastic!! Sounds like the ultimate in shine and protection.

[@email9775]

Hey Pan, just applied this on my stones car after 2 step paint correction. Slickness is great and concur with your comments! Application was a breeze. Did all panels , trim and glass, except for windshield, used Glassparency window treatment. Btw, I also go Bottle 1 of 250 🤣🤣

[@email9775]

Haha *Son’s” car

[@PanTheOrganizer]

Thanks for the feedback! Glad you enjoyed it on your "stone's" car !! HAAH. Good one!

[@remudios]

I’m a big fan of GP. I offer that to my customers. Now they offer Graphene!! Makes the brand even better. Good job GP team and Pan! 💪

[@GlassParency]

GP Fam!

[@MrKeenan3325]

How’s the coating holding up for your customers?

[@mynsxt6]

I picked up this kit when it was first introduced on your channel, I picked it up for a bargain at $99 for the complete graphene kit, now posting for $159 on the Glasparency site. I will using this weekend to coat my daughter's 2017 Hyundai Elantra with 2 coats on all exterior surfaces following a strip wash with Purple Power Vehicle and Boat, prior to that an iron-x with Megs ultimate all wheel cleaner. Clay bar then compounding/polishing with 3D One and Megs M210 polish. prep/panel wipe with Ethos Detox. This is my first venture into the coating world!!!!

[@PanTheOrganizer]

You can do it! 👍🏻

[@mynsxt6]

Turned out great, very user friendly coating, I polished it out with 3D One and it looks amazing!!!!! Thanks again Pan. Applied two layers as they suggested for the 5plus years protection. I will doing the maintenance details every other week, it will be a blast to wash from now on.

[@vick6774]

How do you compare this to adams new Graphene coating?

[@neliosena6608]

Future...future...you are allways very close to it...allways in the route towards... future..👏👏👏👏

[@carmenjr.stangota1383]

You gotta review Adam’s Graphene coating

[@buzzkillington3354]

They're all gona be similar tbh

[@67Jeff]

Working with Adam’s today. GP was very easy to apply. I hope Pan tries them.

[@johnwilliam8366]

Got it in the Mail this week!

[@ldtriton]

Nice product review! Two thumbs up. 👍👍 I would like to see this one up against Ethos Graphene Matrix Coating.

[@stevoeight]

It’s going to be almost identical. B&B who owns Adams is where Glassparency got this coating from. They didn’t even change the bottle.

[@hectorbarajas6107]

Great job pan! Your explanation is nice and clear and I get a lot out of watching your videos!!

[@PanTheOrganizer]

Thanks Hector! I always appreciate the feedback!

[@jasonwarney1979]

I'd like to see you compare that Graphene Ceramic coating with Adams Graphene Ceramic coating? Thank you Pan 😀

[@Bezzle.]

I second this. I also agree with someone else’s comment about your videos beginning to seem like they’re sponsored. If you have a sponsored video, please say so in the description, or in the thumbnail image, or during the intro to the video. Thanks!

[@Jeeper1378]

Doesn’t B&B Blend for Gp? Adams owns B&B so... lol

[@xaviermatos5012]

Pan thank you very much for every video you have done! Recently bought my first car and as a newbie you have help me so much. Glad you exist!

[@GlassParency]

Pan is the man!

[@xaviermatos5012]

GlassParency indeed! 💪🏻

[@PanTheOrganizer]

Great to hear! How did you discover my channel Xavier? And what's your favourite video on my channel so far?

[@xaviermatos5012]

Pan TheOrganizer hi there! 🙌🏻 I was curious about how to properly wash my car and found your video with the topic 😅 my favorite video so far is the list of basic products everyone needs for washing your car / the same for the interiors. 🙌🏻 and the review about the turtle wax seal and shine but probably all of your videos. Saludos desde Puerto Rico 🇵🇷

[@philipbaio2237]

I can't believe how good it looks I have a 2003 Lexus LS 430 black on black that would look great

[@Dr3aMz1982]

Thanks for the recommendation, Pan. Is there any uv protection?

[@PanTheOrganizer]

Yes I talk about it in the video. Did you watch the video?

[@Outlawzand1]

Watch it again Dr3

[@DavidVlogz]

I just applied the glassparency on my windshield and bought it with your code. It’s insane I can just imagine this product will have to buy it.

[@PanTheOrganizer]

Yeah it’s pretty awesome!

[@overtorque]

Pan, you're great. Love the reviews but, I use Wizards Paint Sealant, MeGuiars Ultimate Wax and Collonite. Works just fine for me.

[@trkcarz]

Pan, once again another great product review! I’ve been waiting for this! Paaaaan the organizer! Awesome job Sir!

[@PanTheOrganizer]

Thanks! How did you discover my channel?

[@DrivenDynamicsTV]

Baffles me that the customer wouldn't get a full paint correction before applying something so semi-permanent... especially with that color car.

[@cubul32]

Some thought Pat; I was a bit antsy watching all that :)

[@donealable]

Money. A full paint correction isn't cheap. I love the idea of keeping my vehicle clean easier without spending $1000+.

[@bionictulip]

Yeah, lots of cars just don't merit a full paint correction, but even a minor correction like this one, plus ceramic or graphene, means 1) the car looks better than it did before, and 2) it will be better protected, so it should stay better-looking longer. Plus the comparative ease of cleaning after a protective coating is applied is an additional benefit even if no paint correction is done at all.

[@JaydeepDave12]

I have been waiting for Graphene since a couple of years. I am very happy it is here.

[@JerryBrok]

hahahaha like a kid in a toy store. Look at that smile. NICE!!! :D hahaha nice video Again!! Keep it up Pan!

[@PanTheOrganizer]

Thanks! Will do!

[@nachomandetailingservices1057]

Amazing wow pan bottle omg I hope when I order I get 1 of your bottles. I need to wait a couple months wife said I buying to much stuff I got a couple boxes filled with detail stuff. But when I can without getting in trouble with the wife. I’ll get some thank you PAN.

[@PanTheOrganizer]

Heheh the Pan versions were sold out super quick once my video released. But you can still get the regular version (same product, just different label). You can tell your wife all your purchases are approved by Pan! :)

[@nachomandetailingservices1057]

@@PanTheOrganizer lmao told her 🤣🤣🤣 and got a iron remover bottle to the head🤣🤣🤣🤦🏻‍♂️ I’ll have to wait!! 🤣🤣

[@silverfoxsilverfox6932]

Hi Pan let's see the glassparency graphene coating go up against the opti coat pro plus on your BMW then we can see if it really is better.

[@GlassParency]

💪💪💪

[@PanTheOrganizer]

t wouldn't be a fair comparison, as Opti-Coat Pro+ is a 7+ year pro grade coating that can only be applied by authorized dealers and a service like that, for a car like mine, starts at around $1500 USD, versus a 100$ kit of this graphene coating that anyone can purchase and easily apply. So for value, hands down the graphene coating kit. For durability, only time will tell as these are brand new products so nobody has had the time to test them over multiple years yet, obviously. If it gets anywhere near 4+ years of durability, then I would opt for the graphene kit.

[@silverfoxsilverfox6932]

@@PanTheOrganizer Its probably now only a matter of time before graphene coatings take the place of ceramic coatings, we are yet to see graphene coatings from some of the big hitters like carpro or gtechniq they could really change the landscape with products that might last longer than ten years. That graphene coating was so easy to apply and it's cheap if it can get to 5 years that's amazing, from the look of your test car the gloss and shine looks just as good if not better than crystal serum ultra black, I will watch this emerging changing of the guard with interest.

[@aldobiglari4575]

@@PanTheOrganizer Hi Pan Thank you for your lovely demos. Just a matter of curiosity, how do you suggest we wash our cars so that it doesn't remove the Graphene coates we put on? What should we use? And can we use wax and polish after we wash our car after 14 days? Please let me know. Thank you.

[@silverfoxsilverfox6932]

@@PanTheOrganizer I like the way you have created relationships with the companies in the car detailing industry, your channel has grown immensely due to your hard work. Your dedication to car detailing and your audience is very clear, we get the hottest news on products straight from the businesses through you which is just fantastic, keep up the great videos, I would love to see a blog style series of videos on jobs that you do on project cars, I know its a step away from what you usually do but it could be good. I think Chicago auto pros do this type of video all the time.

[@Adam684]

Wow, thanks for sharing, this is super cool! Unfortunately I JUST coated my vehicle using C.Quartz UK 3.0. so I suppose I would love to see a head to head of these two products!

[@MrWiper80]

Sorry Pan, only the shipping for me was 166 USD + customs to Sweden ☹️

[@Rich--J]

Good timing....If all goes well, trading cars tomorrow. This will be my project for next weekend. Would you use Bead Maker in between the Boost uses a sacrificial layer? Thanks again for the help and insight.

[@Rich--J]

Pan edition already sold out. Had to order the non-Pan bottle. lol

[@PanTheOrganizer]

Yes you can use Bead Maker too.

[@Rich--J]

@@PanTheOrganizer ...thanks Pan. Ok, I have to ask a dumb question? What is considered a maintenance wash you spoke about doing every two or three months, then finishing it off with the Boost? Just trying to make sure I"m on the same page as you, before doing this Tuesday. Thanks!

[@-curedetailing2162]

I'm actually very interested in graphene coatings. But I'm not sure if it really has graphene in it or if it's an evolutionary version of a ceramic coating. Do you happen to know the exact information?

[@yaishmatheen4274]

큐어 디테일링-CURE Detailing it really is graphene, essentially a separated graphite molecule

[@xtnuser5338]

I'm only guessing here... they probably just put graphite into their formula. There is zero chance that you can apply something with a sponge, in an environment of regular air, and at regular outdoor temperatures, that will actually result in a single atom thick, unbroken honeycomb layer of graphene all over your car. If that was actually possible, there wouldn't be a five year limit, and you wouldn't need to coat it or "maintain" it with something else afterwards. I'm not saying it won't perform as advertised...I'm just saying that it's an awfully profitable way for them to sell a tiny bit of graphite powder. Again...just a guess.

[@hyejack10]

Very excited I ordered the kit and received my kit 1-250 Today I'm having my Chevy 2500 cut and polished and right after going to follow your instructions to coat my truck. Previously I had the original Quarts ceramic coating for the last two years and used the reload booster every few months worked and looked great but this seems to be a better product. Thank you for your video. FYI Truck is 2018 Chevy 2500 Z71 4x4 diesel LTZ.

[@PanTheOrganizer]

Awesome! Good choice. Let me know how it works out for you! Should be pretty simple to apply.

[@sivakornamatavirakul9391]

Carnauba: “I can last 1 month” Paint sealant: “I can last 6 months.” Ceramic coating: “I can last 2 years.” ... Graphene coating: “Hold my beer.....”

[@JWL-UK]

@@darius2640 I did do something similar when selling my wife's car that had Fusso Coat+BSD on it!

[@jrlundman]

Can I apply graphene coating over ceramic coating?

[@1stfrompuertorico568]

@@jrlundman no you can't. Ceramic coating or Graphene coating requires to bond to the clear coat. Xoxo from Puerto Rico 👍🇵🇷

[@beejay8719]

@@jrlundman no!! It is made to bind to you clear without any protection.

[@bobbymelanson]

Was literally just about to purchase either crystal serum light or UK3.0 for my 1st paint correction and protection and saw this! PURCHASE COMPLETE! At the very least, happy to support Pan. Here we go...

[@PanTheOrganizer]

Hope you like it!

[@SushilKPingua]

Greetings from India, The product costs me $99 & Amazingly shipping is $200.

[@GlassParency]

Unfortunately, we are running into the issues of other carriers loosing packages too often lately. We chose to use UPS because currently the most reliable. Email us at [e-mail] and on Monday I will see if there is anything better for your location.

[@edonsmith8616]

I love having an expert like Pan to get advice from. I know there are other opinions but I trust Pan and if I need something I just buy the product that is in his top three of that category and I know that I am getting a great product. He has not let me down for years and I am a journalist working in the RV industry and have published several articles on detailed of RVs. I love PAN, thanks

[@PanTheOrganizer]

Thank you for the trust you place in my opinion. I appreciate that. Graphene is a new buzzword in the industry as this is new to detailing technology (although it has been around in the scientific world since the mid 2000's). So it's normal that people have questions. I just don't want people to get caught up on graphene vs graphene oxide dilemmas, how much graphene % in is a bottle, where are the MSDS data sheets, etc. Like some became obsessed when ceramic coatings were becoming popular. Many thought it was snake oil. Fast forward 5 or 6 years, and everybody now knows how awesome ceramic coatings are. Who cares how much SiO2 % is in a bottle, how can they bottle silica, etc. What really counts is how a product performs in real life, in real world scenarios. I have a big scientific background with university degrees in molecular biology and biochemistry so I can make up my mind quicker than most on new tech in the car care industry. I have the ability thanks to my channel to discuss with the brands and their chemists and make up my own mind. Pure graphene is prohibitively expensive and hard to source. Graphene oxide, its reduced form, is much more usable and easier to attain. Each company has a different way of formulating their products, and for 303 they have been able to make it work. Check out this video where their chemist explains more about the science behind it: kzbin.info/www/bejne/f6aWaXRtpZqtoNU I can’t stress enough how people should focus more about the product performance than about the chemistry. I remember when ceramic coatings first started being popular 5-6 years ago. People were saying that ceramics were snake oil. They were focusing only on SiO2 % and MSDS data sheets instead of product performance. They said it’s impossible to bottle silica (SiO2). So much drama. Fast forward 5-6 years later, and everyone knows just how amazing ceramic coatings actually are. So the same thing seems to be the case with graphene or graphene oxide based products. As it’s new to market technology (although graphene has been around for over a decade in the science world), people are questioning everything about it. It’s nice to have open discussions about new products and new technologies, but again, people shouldn’t focus only on chemistry. What’s most important is how a product performs in real life. And from what I have tested so far, graphene (or graphene oxide) based products look VERY promising. The future of automotive paint protection is exciting!

[@edonsmith8616]

@@PanTheOrganizer You said use Carpro CQ Quartz UK and gloss and I did the last few years on all my vehicles and loved it. So today I bought Glassparancy Graphene. I cant wait to try it. I have one vehicle I coated with Carpro and Gliss a year ago and because it is an extra vehicle I could work on it day by day and not drive it etc until I was completely finished. It was over a month before it got wet after following your routine for prep and coating and topping with gliss then reload. I dont know it was the extra cure time or the fact that it stays in a garage more than my daily driver but the water beading exactly a year later is still insane. Water stands up on it like a freshly coated vehicle. Other vehicles had received the same coating and prep but not the extended cure time before getting wet and they dont seem to hold up as well. Do you think there is a big benefit to the extended cure that one vehicle had? Or is it because I dont drive it every day that the coating is holding up so great ? I used the same Carpro products on all of them last September of 2019 on three vehicles but the one that cured the longest is clearly behaving better in terms of beading etc. Thanks again for your expertise. I tell everyone to just watch your videos and take your advise and buy off your top three list.

[@edonsmith8616]

@@PanTheOrganizer I received the Graphene last week and applied it this weekend. I had a LOT of problems that I have not had before with any other coatings. Maybe it was because it was rainy and humid but the temps were 70s and I kept getting really bad high spots and some shadow like high spots where it almost didn't wipe off well and just left a very slight haze. I hated the applicator that came with it so I switched to a traditional foam pad with a small suede like mini towel like everyone else supplies and that helped some. But I think its only fair that you warn everyone about this being a more difficult to apply coating than others such as Optimum or Carpro if it is humid. Also if any water weeps out of trim or molding or around a mirror etc. you can count on a big ugly high spot that you will have to address with polish to level it back out and remove the smudge. I finally got it on and off and it looks great and the boost really helped add the super slick feel I like. I am going to let it cure a week indoors and then get it out and see how it holds up. I hope I dont find a lot more high spots once outside. It took me a LOT longer to apply than Carpro UK and Gliss which is to me a super easy coating system.

[@edonsmith8616]

Today I used Glassparancy Graphene again in very different weather than above. Today it was 65F and very dry outside and I made sure the vehicle was 100% dry. This time I found the application VERY easy to do and none of the problems I mentioned above. It looks and feels fantastic. I think once the boost is applied it actually feels slicker than CarPro Gliss and Reload. Now to see how it holds up. It seems that all my issues above came from the very humid weather I used it in the first time

[@RichAbe23]

Give it time as the insane price of this type of product will dramatically come down.

[@tomamilanovic3534]

Glassparency in NY- to my house in Ohio, less that 500 miles, $15 for shipping. kind of excessive, looks like others are being quoated much higher shipping costs, especially in other countries.. I missed the special pan the organizer bottle, but because of your extreme enthusiasm i had to buy a bottle to test it out myself.. Thanks again for a wondeful video

[@alasdairmacdonald4685]

I’d love to buy this, but the shipping was ridiculous! $244 to Scotland?? Too much Glassparency!

[@GlassParency]

Unfortunately, we are running into the issues of other carriers loosing packages too often lately. We chose to use UPS because currently the most reliable. Email us at [e-mail] and on Monday I will see if there is anything better for your location.

[@jamest7485]

I'm curious to know what carrier they are using 🤔. I see everyone outside of the USA saying this and it just boggles my mind as to why it would cost so much. I mean, it can't weigh more than 2lbs. Wth...

[@404notfound.....]

I have waiting for a quality review on this awesome product!!! Will be ordering today. Thanks pan!

[@PanTheOrganizer]

You are so welcome!

[@aldaley3537]

@404 not found: have you applied the Glassparency graphene coating yet? If yes, what do you think? Planning on doing my application tomorrow. Thank you.

[@404notfound.....]

@@aldaley3537 .. It's on my short list will be ordering it next week. I've heard nothing but good about these coatings, will keep you advised.

[@NordicAdvRider]

Was happy to order this when I found out that delivery cost to Sweden was $167. So no thanks

[@marcinkokoszka9058]

same here, I was just about to buy it aaaand I saw the delivery cost...

[@AkiDarkWolf]

144$ to Germany. I‘ll wait until people have experience with this type of coating and how long they last in real life conditions. Also shipping will be for free then for sure.

[@taylorc2542]

Why would shipping be that much? Sounds like the company is ripping people off through spurious shipping cost.

[@AkiDarkWolf]

Taylor C Seems like it. There is already a lot of people complaining. I wonder how many already bought it with that insane shipping costs.

[@bionictulip]

Jumping to conclusions about the company "ripping people off" is way premature. There are lots of reasons, mostly caused by government (VAT, customs, taxes, tariffs, importation constraints) that result in seemingly absurd shipping charges. If something seems silly, your first question usually should be "did government cause this?"

[@davecraig7082]

I'd be scared to use the pan the organiser version in case it becomes a collectors item!

[@brandenlucero]

if the contents inside are the same, then it doesn't really matter. Unless they seal it. If you empty the Pan the Organizer version, just buy the regular version and refill it. No one would know the difference.

[@PanTheOrganizer]

An unopened bottle in 10 years would be awesome to see! Like a vintage wine!

[@davecraig7082]

@@PanTheOrganizer Haha brilliant, exactly what I was thinking! Lol

[@MarkSegree]

You're always the kid in the candy store. Love your attitude, a man who enjoys is job never worked a day in his life.

[@PanTheOrganizer]

Yup! Even after 23 years of detailing, it's still one of my biggest passions in life.

[@emiliendurand640]

Shipping cost for Europe are insane :(

[@TheMaauw]

yeah, i've recieved mine a while ago, i had to pay 45 dollars for shipping, without tracking code (With tracking it would be double that amount) I live in Belgium Then i had to pay another 48.5 euro's to the customs before i was able to receive my package. it sucks, but thats not GP their fault. I bet I will enjoy their products a lot. I can't wait to get my E28 fixed, detail it and apply the coating!

[@TheMschils]

@@TheMaauw so what are you using now? instead of the expensive shipping cost.

[@TheMaauw]

@@TheMschils well i did pay for everything tho.. But normally i use the ceramic coating UK3.0

[@zakariaguettaoui1661]

Pour la france ?

[@emiliendurand640]

@@zakariaguettaoui1661 oui 140€..

[@myalfie]

Fantastic product the next generation ceramic coating is here thanks pan for a fantastic demonstration of this product.

[@PanTheOrganizer]

Thank you!

[@Juleslechat]

Almost makes me regret that I ceramic coated my Mustang last month 🥴.

[@PanTheOrganizer]

What coating did you apply?

[@JustinMyers]

I ceramic coated for the first, used FicTech! very easy to use.

[@Juleslechat]

Pan TheOrganizer CarPro CQuartz UK 3.0. It did a great job. However, it was my first time applying a ceramic coat and I felt it was not so obvious to see the “flashing” on a candy red paint.

[@chidude]

I was just coming up to speed on ceramic coatings, and have AvalonKing ceramic coating on order for my Tesla M3. Now I see that maybe graphene coatings take it to the next level!

[@Exoseven]

Wow! The beading & sheathing is insane! 🤩

[@PanTheOrganizer]

It really is!

[@budgetplan8730]

Lotsa stuff out there lately, some recently released ‘Graphene Coatings’ are sparking discussion, sometimes a bit contentious, sometimes optimistic, sometimes pessimistic but unusually entertaining. Plenty of folks saying it’s nonsense and taking it to task based upon wording (Graphene Coating, Graphene-Infused Coating, Graphene Ceramic Coating, etc.) and the suspect ability to currently actually produce a true GRAPHENE COATING. I wasn’t around when coatings came around, touting such nonsense as “Diamond-Infused 10h Hardness” and similar “9H hardness, over twice as hard as your clearcoat” claims (the latter while being technically correct, in reality proves to pretty close to functionally irrelevant…”This really soft pillow is harder than that really soft pillow”) so dunno if the backlash was similar but it’s quite interesting nonetheless. I dunno, ain’t no scientist but it is all currently quite intriguing to me. I had SPS Graphene on my daily from May 2019 thru August 2020 (16k miles), very nice product but in the end its positive aspects did not quite meet my particular needs so back to ceramics. Frankly, whether or not it says graphene on the label is of no matter to me, the coating in the bottle either works for me and my specific needs or it doesn’t. The SPS was a great coating overall, especially if you like slickness and high water contact angle entertainment. Didn’t meet my needs in the end but that doesn’t mean it’s a bad product at all, rather that it’s just not a great product FOR ME. Time will tell with graphene, I guess. Feynlab Blog Post: Coating Chemistries, and Differentiating Marketing Terms from Actual Chemistry: www.feynlab.com/coating-chemistries-and-differentiating-marketing-terms-from-actual-chemistry/ Rag Company Q & A w/ Gtechniq; 46 minutes in the topic of Graphene comes up: ASK Us About Detailing & Cars w/ GTECHNIQ! | Q&A Thursday #81 | August 6th, 2020: kzbin.info/www/bejne/jpvcfZqblK1laMU A little bit from Alfred Yow, the mind behind the Art d’ Shine/SPS coatings. Kinda clarifies the role of the Reduced Graphene Oxide component in the coatings. From a Facebook post regarding graphene coatings. Seems like a bit of a ‘helper’ to the PDMS portion of the formulation: " To add on some answers to the article on Graphene, The polymer used in Artdeshine’s product, PDMS has very low thermal conductivity, absorbing less heat when exposed. And if heat has been absorbed, the better dissipation and thermal conductivity ability of reduced Graphene Oxide (rGO) will help to negate. What we do not want is all that heat absorbed to be trapped. To say it simply, this is a case of using rGO to reduce the insulation (keeping heat) properties of PDMS. Artdeshine has never touted using flames in any of our tests or marketing materials. This serves no purpose to demonstrate any capability of our coatings. We are not making fire-proof/retardant materials. And again, we are not touting thermal insulation as a beneficial property, we are trying to negate insulation. Water repellent capabilities do not come from the use of rGO and can be seen in our marketing materials and information. A very high polymer (PDMS) content is used to achieve the better water-repellent effects. The polymer has been functionalized to provide much better water repellent capabilities." I think it's gonna take some time to figure all of this out re: graphene. Migliore, SPS/Art d' Shine, Ethos, Glassparancy, Adam's, TAC Systems and a few more have released products w graphene as part of their formulations but perhaps more telling are those mfg's who haven't; CarPro, Gyeon, Feynlab, Optimum and Gtechniq, some of whom have openly questioned the value of graphene given it's manufacturing limitations at this time. 🤔 The primary 'optimistic benefit' of graphene as it's currently marketed is the potential reduction in water spotting due to it's ability to reduce surface temps; occasional mentions of graphene's toughness is tossed about but that seems to be a secondary point. Any visible performance benefits such as slickness, water behavior and similar are (as Albert Yow explains it) not due to graphene at all so, well...I dunno 😄 Will be fun to watch but not convinced that it's really any kind of 'revolution' given my personal experience with it. I guess that could change in future...or not. What I get from all of this is: 1. Current technology does not allow for any fundamentally significant level of Graphene to be incorporated into a coating. 2. Any real or perceived benefits of a graphene coating have very little (if anything) to do with any trace amount of graphene in it. 3. The functional foundation of any graphene coating is basically the same as a ceramic, likely Siloxane/Polysiloxane/Polydimethylsiloxane (PDMS) or Polysilazanes. So if we bake a 'Graphene Coating Cake' the cake batter itself is the same as if we baked a 'Ceramic Coating Cake' and the graphene in the cake is not significant enough to even be considered the frosting on the cake but rather merely the handful of 'sprinkles' on top of the frosting on top of the cake. Maybe. I kinda view it as using a ceramic coating that for some reason has an extra word on the label, and merely taking up space on that label is likely the greatest visible contribution 'graphene' makes to the overall satisfaction.

[@docwatson6500]

Observation: I've concluded that no product regardless of price will effectively protect a daily-driven auto that is parked in the open (not covered or garaged) in an area with multiple heavy industries. Conclusion - constant maintenance/correction required with a full strip/reseal every 30-45 days. It just is what it is. Interested in your input, thanks

[@budgetplan8730]

@@docwatson6500 Environment, along with vehicle usage patterns is indeed the biggest factor in LSP longevity/resistance. We've had good luck w ceramics on cars that sit outside 24/7 and get little maintenance but we're certainly not near an industrial center. Can handle what Mother Nature throws at it w no issues but not what mankind throws out there 😱

[@docwatson6500]

@@budgetplan8730, thanks. Finally a candid answer. My wife drives her black 7 Series to the top of her company's parking garage far away from all the clueless door dingers. Unfortunately the 17 floor office building is just 1/2 south of Exxon Mobil Chemical and 1/4 mile north of Ohmsted Steel. Contaminants often appear within a week of sealing the paint. Doesn't keep me from going back into the fight though. :)

[@budgetplan8730]

@@docwatson6500 With a black car to boot...😱 That is a tough circumstance. It's a shame that the absolute worst thing you can do for a vehicles aesthetics is to drive the thing. 😄

[@docwatson6500]

@@budgetplan8730, I've been seriously detailing now for about 50 years, so I've just accepted this situation as my cross to bear. And when it's right, the Black/Black Bismark is a sight to behold.

[@shonhall4197]

One of the first videos that has an Obvious difference in the before and after. Very nice job. Look forward to using this product.

[@PanTheOrganizer]

Thanks Shon.

[@shonhall4197]

@@PanTheOrganizer , the camera usually never does the results any justice, but this time around the end result was too dramatic to not notice. Great product and my new go to car show product.

[@kenkobra]

The problem with a black painted car is you can still see all the imprefections.

[@PanTheOrganizer]

I agree. You would never see me buying a black car.

[@paulmaria6747]

Black isn’t a color, it’s a second job

[@thejalderman]

I can’t wait. Buying now. Congrats man!!!

[@PanTheOrganizer]

Thanks for watching John!

[@3150xYz]

Shipping alone is $144 to the UK :(

[@davidf9027]

Hi Pan. After seeing how good my 4Runner came out, my neighbor asked me to help him do his car. Long story short: so you know, the Glassparancy can flash, like ceramics, in very high humidity. Today I was able to do about 1/2 of his car without problems, as we worked before the rain came. We pulled his car into his garage just before it started raining but then, about 30min after working inside, and the rain had been falling, I started getting flashing. Luckily it happened in a small panel I was working on so it wasn’t much but I still had to use a polish/compound to remove the area that flashed. Now we will wait until the rain stops to finish the car, but it remains inside to keep water off of it. I hope this helps you and your viewers who plan to use this!

[@PanTheOrganizer]

Thanks for the feedback! I always work in my controlled environment so it’s good to know.

[@abdullahbaig8097]

Pan please review ethos graphene coating

[@alangligor]

Hi Pan!! Thank you for doing the review about graphene coating! I’ve asked you about it a few months ago and you kept your word. Thank you!

[@xulemann]

Over 200$ shipping to Norway 😬

[@Norwegianvideos]

ulrik johansen yeeeaa nei takk

[@MrSquidge75]

Ouch! Looks like I’ll be waiting awhile then

[@muhammadsuleman2903]

Holy Cow!!!! Cost me CAD $190, it better be good or else will be getting my honest review. Thanks PAN as always

[@paulshields6234]

pan I am heartbroken ups want 144 dollars to ship to UK 😢

[@vishalsainath3422]

Well through the whole process of ordering and the courier charge at way more expensive than the product. Can you do something about it. A less expensive courier options

[@GlassParency]

@@vishalsainath3422 unfortunately, we are running into the issues of other carriers loosing packages too often lately. We chose to use UPS because currently the most reliable. Email us at [e-mail] and I will see if there is anything better for your location.

[@peterwong5449]

I totally understand, I hit the check out button and it costed $155 AUD just to ship to OZ

[@cjsauto1392]

@@peterwong5449 Same here $370 AUD to my door :(

[@raphael9339]

It's not worth buying anything from the USA, if you are not based in North America. The courier charges are always ridiculous and often cost way more than the product 🤬😤

[@thenotoriousrvh6091]

That's the sincerest form of flattery having your name on a product, good for you !!

[@PanTheOrganizer]

Thanks! It was an awesome moment in my channel's life! :)

[@romickey27]

U$188 shipping cost to Brazil, sureal!

[@johnkwan8188]

Awesome video Pan. I would like to see comparison video of Gtechniq Crystal Serum Light vs GP Graphene. Thanks and keep up the great work

[@RastadasPT]

The guy paid for graphene protection but didn't want to shell out the money for a decent paint correction.

[@jamest7485]

Maybe it just didn't need it. The car looks pretty new.

[@thenotoriousrvh6091]

2018 Accord probably garaged, didn't look like it needed it.

[@tonymontana897]

Sometimes a thorough one stage is enough to get it looking nice. It's not an exotic so the one stage will suffice and the ceramic coating will adhere nicely.

[@PanTheOrganizer]

Well said Tony.

[@joec8167]

Picked 1 up on the previous offer. 👍🏽 So I had to get 2 PTO edition bottles thanks for making this possible for your viewers.

[@PanTheOrganizer]

Good choice!

[@Tewthpaste]

*5 years or protection.* *3 month later: why is the car so dirty and dull already.* *says no coating ever.*

[@yaishmatheen4274]

You do realise you are still meant to wash the car once every one or two weeks using the proper techniques?

[@mynsxt6]

Finally did the Glassparency coating on my daughter car the 4th of Sept and did my car on the 11th, will do her first maintenance wash this sat the 18th and mine on the 25th...Very very satisfying user experience with this coating. The do need to improve the formula so that the 5+ years can be achieved with just one layer!!!!!!

[@PanTheOrganizer]

👍🏻

[@larsandresen1068]

167$ to ship it to Denmark 🤯🤯🤯

[@TheMaauw]

this is probaly with tracking. And you have to consider the custom fee as well. In belgium, this was another 48.5 euros

[@jeffwomack5821]

JUST TAKE MY MONEY !! It comes in a super cool bottle ! Show us again how cool it is.

[@J1Z06]

I'm surprised I didn't see or comment on this... from the video regarding durability, it looks pretty darn strong! I'm definitely trying it on something when the weather breaks! Nothing compared to this on the durability video after a year of abuse. Thanks, Pan!!

[@PanTheOrganizer]

My pleasure Jay!

[@J1Z06]

@@PanTheOrganizer I'm very anxious to try it! Thanks!

[@blackrhinocarcare1087]

We are definitely going to have to send you a bottle of our silicon nitride/graphene coating to see how you like it. We think you'll love it!

[@EatMyPropwash]

Just purchased Pan The Organizer Kit before the video was even finished. Plan to use this on my 2016 Fusion, 2016 NISMO 370Z, wife’s 2019 Escape, and both my road bike and triathlon bike. 😍

[@PanTheOrganizer]

Cool! The PTO edition quickly sold out less than 10 hours after the video went live! :)

[@Ninja8021]

I think it is cool that can purchase Glassparency through watching Pan TheOrganizer KZbin channel, but cannot purchase Glassparency products by going directly to their website. Thank you Pan for making this possible!

[@PanTheOrganizer]

Thanks Ryan! How did you discover my channel by the way?

[@Ninja8021]

@@PanTheOrganizer You're welcome! I found your channel when I first searched for different types of clay bars. Afterward, I like your mannerism, the way you structure the video contents and you increased my car detailing knowledge ten folds! I always reference your KZbin channel when I get asked questions on how I keep my car so shiny and clean. You're the best car detailing channel in my opinion :)

[@yanikasingh1984]

Congratulations for your 23years of great experience,and thank you for experience you share with us.😀

[@clixt984]

I'm conflicted. I'm not sure if you like this product because it's a sponsored video or you like it because of it works. Either way I might try it. I bought the Turtle Wax Hybrid Solutions (3-1, detailed, and ceramic spray) because you highly rated it, and I'm glad I bought it!

[@PanTheOrganizer]

I only review products that I like and actually use in my arsenal. I have one of the biggest detailing channels on KZbin with over 500,000 subscribers and 55 million views. I have built a solid relationship based on trust with my audience. I wouldn't sacrifice that for anything, so I wouldn't present a product I don't actually like. This one is the real deal so far.

[@clixt984]

Pan TheOrganizer good to know! I was going to get ceramic coating for my car but I guess I'll try out this one out instead.

[@PanTheOrganizer]

How did you discover my channel by the way?

[@clixt984]

Pan TheOrganizer KZbin algorithm lol. I was looking for how to remove bird droppings video then your your How to Apply Ceramic coating video popped so I watched it. From then on I've seen a few videos of yours as well, one of which is the Turtle Wax Hybrid Solutions video. I was sold so I bought em all per your honest opinion of it. I'm a subscriber of you'd now as well.

[@DocMackGarage]

5 years durability is crazy. I would be satisfied if it lasts even 2 years, 5 years is a bonus. Looks like a well made product. Good video demo.

[@PanTheOrganizer]

Thanks!

[@67Jeff]

I ordered mine on your last promo with GP. Like you say Very easy to apply and the beading is crazy. No more ceramics for me. Working with Adam’s Graphene coating today. I like the UV idea. We’ll see. Thanks Pan.

[@PanTheOrganizer]

Thanks for sharing!

[@67Jeff]

Pan TheOrganizer used the Adam’S spray Graphene coating today. Goes on nice and easy but it smells bad to me. Working with the Graphene coating tomorrow. What have you used for bring back trim? That then we could coat.

[@JoshuaWaterDragonDeale]

As soon as you said pan the organizer version I automatically ordered lol. Happy to order this. Looking forward to applying this 💪

[@PanTheOrganizer]

That's awesome that you were among the first to order so you could get the limited edition PTO bottle! It sold out roughly 10 hours after the video went live! :)

[@JoshuaWaterDragonDeale]

@@PanTheOrganizer then I'm really suprise I got it lol

[@kchilton24]

Did my wife’s car and it came out amazing! Definitely recommend it.

[@PanTheOrganizer]

Thanks for the real world feedback Kristopher!

[@unitedwestand5166]

Thanks Pan. Ordered some soon as i watched this👍. And yes i would like to see you put this stuff up against ceramic coating of your choice.