Removing and installing the rear view windshield mirror on a 2004 Ford Escape. This process works on several Ford, Mazda and Mercury models, including Mariners, Tributes and more.
Пікірлер: 151
@JOE4O12 жыл бұрын
This video out of all the rest,,(for my vehicle),,was the most helpful!! No body explained like you did and showed how to get back on. 👍 Thank you
@GreaseMonkeyFever2 жыл бұрын
Thanks, Joe...glad the vid help. Thanks for watching!
@snl1962Ай бұрын
BEST step by step video out there! Took me about a minute total, because of this! Thank you!!!
@rkgsd4 жыл бұрын
No words spoken and yet the most thoroughly explained video on how to remove these rearview mirrors.
@GreaseMonkeyFever4 жыл бұрын
I wanted to make videos that work more like a manual, that can be followed to, as opposed to an entertainment video. Thanks for watching!
@ericmatte2 ай бұрын
Thank you! This is by far the safest and best tutorial on KZbin for this rear mirror. It was super easy to do.
@tonymcclendon-hobbytime77275 ай бұрын
Awesome directions, here in 2024, years after the video was posted. Very helpful compared to the other useless videos. Thanks a million. 😊
@sergiosan013 жыл бұрын
Who doesn't like this video? Thank you for the video. It save me a broken windshield
@94regnar Жыл бұрын
Great video, after 16 years my rear view mirror in my 2007 mustang GT started to de-laminate, the use of dish soap was very helpful.
@GreaseMonkeyFever Жыл бұрын
It's amazing how many times I grab the soapy water bottle. Seems like I refill it a lot, too. it makes a quick, non-greasy lube for plastics...heck, I've used it for lube to press ball joints into control arms. And it's always handy in finding that slow leak in a tire. Top 3 liquids used...PB Blaster, brake cleaner and soapy water! Thanks for watching!
@BigEightiesNewWave Жыл бұрын
1st video of DOZENS that actually shows you in detail what you are trying to do, shows actual spring clips, prying slightly downward on the LOWER INNER LIP, while PUSHING it off of the anchor. Others show prying down HARD without SLIDING it off. THAT IS WRONG. This is RIGHT. Prying down HARD without SLIDING can lead to dislodged anchor and/or broken windshield. The LOWER INNER LIP is what springs back into place when a new mirror is slid on. This video is the Gold Standard video of how to do it.
@nautical7936 Жыл бұрын
Great video! Just watched this before replacing the rear view mirror on my 2007 Ford F150. Took all of 3 or 4 minutes to complete. Very helpful. Thanks!!
@GreaseMonkeyFever Жыл бұрын
Thanks, Nautical...glad the vid helped. The only thing I wished I had added was to never do this if the windshield is hot from sitting in direct sunlight for a long period of time...it can crack. Thanks for watching!
@Zalagar6193 жыл бұрын
Just a Little Tip: I just removed mine on my 2001 Ford F150, at first I tried it with an Allen Wrench that I had handy, but it was really short and made it difficult to pry the latch, I instead grabbed my longer Pocket Screwdriver and it made easy work of it. So if you have the, try to use a longer Allen Wrench or a Pocket Screw Driver. Also another tip, don't push it all the way up in the mount, just insert it just past the latch and pry there.
@music-843 жыл бұрын
You are the man! Searched and watch several videos and you sir, did it best! Thanks alot!
@brianburk83582 ай бұрын
Exactly what I needed for my 2017 Ford F-250 Super Duty. Done in just a few minutes. Couldn’t have made it any easier!
@modua2 жыл бұрын
perfect, best repair manual I've ever seen thanks!
@chrisdaunhauer17574 жыл бұрын
this is the best video I saw on this topic. Looked at a bunch of them. This video gave me confidence to try it WITHOUT ordering a special tool. I used a tack pry puller. Was nervous about cracking the glass, but took it slow as per this video and it came off easily. THANKS !
@BigEightiesNewWave Жыл бұрын
The 13mm open ended wrench with tape method is pure genius and looks to be the most sure-fire method.
@jrhunter0073 жыл бұрын
Excellent vid. Best I've seen on the subject.
@bchuggs2 жыл бұрын
Your a gentleman and a scholar, thanks!
@illerob6665 жыл бұрын
This my Friend is the PERFECT template for a you tube DYI video. PAY attention people, you make a DIY video, try to attain this quality. Superb view the tools the outside looking in video, GREAT. THANKS
@johnecker42172 жыл бұрын
I have a 2002 f150 with the 4.6L V8. I am mechanical inclined, I figured out how to replace the timing chains,the timing chain guides,the tensioners& gears with ease (after I read & understood where the #1 piston needed to be to keep it in time). I had to put a transmission in the truck 2yrs ago by myself. And I also had a 401 code-which means that there is something wrong with the EGR system that kept my check engine light on, which meant I couldn't pass NJ inspection since I bought it, (4yrs ago) I finally figured out what was wrong and fix it,and I finally passed inspection 👍. Then my side power mirrors didn't work, but I figured that out & fixed it! Then about a week ago my rear view mirror fell off,and for the life of me I COULD NOT figure out how to put it back on 🤔😜! That was until I saw this excellent 👌 video that showed me step by step how to replace it. Now it's back on and I can see the past behind me 😃. Thank You for this excellent video!
@GreaseMonkeyFever2 жыл бұрын
Thanks, John...glad the vid helped. The one thing I would add to this video is discouraging someone to do this when the windshield is hot from direct sunlight...it can crack. Thanks for watching!
@flyboy85335 жыл бұрын
Awesome video. I have a Ford Mustang GT that had a screwed up rear view mirror when I purchased it. I was taking it in to get the Windows tinted at a 3M dealership who works with this all the time so I asked them to leave the mirror off when they removed it. When I got back they said they were afraid to take it down that they would break that window. They got me so nervous I was going to bring it to the Ford dealership. I have no mechanical ability but was able to do it with ease thanks to your video.That's what KZbin's all about, helping each other. Thanks again
@pgo3014 жыл бұрын
That's about as good as an illustration as you can make or get. You made it look so easy, and should take all of about 80 seconds to perform. Thank You !!!
@byrongatwood92474 жыл бұрын
Just what I needed: starts with a visual of the inner workings, then, explains and shows what needs to happen, and then gives three alternatives to the special tool (I used an open-end wrench, with tape, and it was perfect). Excellent video.
@esoteric_Derek2 жыл бұрын
This was incredibly helpful! Exactly what I was hoping to find for my 2002 F150's rear view mirror. Thank you very much!
@GreaseMonkeyFever2 жыл бұрын
Glad the vid helped, Derek. The only thing I would add in this video is to warn people that you should not do this when the windshield is hot from sitting in the sun. Messing with a hot windshield will crack it. Thanks for watching!
@9-ballguru Жыл бұрын
This video was exactly what I needed, thank you so much for making it!👍
@GreaseMonkeyFever Жыл бұрын
Glad the vid helped you get the mirror fixed, Scott. The only thing I should've added was to never do this if the sun has been beaming on the windshield all day and it's crazy hot...it can crack. This should be done when the windshield is at a reasonable temperature. Thanks for watching!
@kennywarren23173 жыл бұрын
Simple and very easy to grasp and understand. A 5 yr old can do this
@ceciliachavez28312 жыл бұрын
This is exactly what I needed. 🙏 Thanks. My little girl grabbed onto the mirror and attempted to hang from it and well the mirror popped off the attachment piece. I have a replacement but just didn't know how to get the old part off the base.
@williamkruczek73712 жыл бұрын
This video is so well made and detailed. The video takes any guess work out of it. Thank you.
@ronjlwhite80582 жыл бұрын
Out of the 3 vids I just watched...this one was the one that showed what needed to be seen.
@GreaseMonkeyFever2 жыл бұрын
Glad the video helped, Ron. The only thing I would've added is that you shouldn't do this when the windshield is really hot (sitting in direct sunlight, during the hottest time of the day). It could crack when it's like that. Thanks, for watching!
@ElusiveTechBro2 ай бұрын
Literally best video on this!!! Thanks!!! 🙏🏻
@demiurgiac4 жыл бұрын
Just what I needed so I wont go messing things up! Extremely well done "How To"... well thought out in advance, no shaky camera, no 'one hand operation' while the other hand operates the camera. Perfect!
@bobc56233 жыл бұрын
Worked like a charm 1st time.
@bobdoering8212 Жыл бұрын
This is without a doubt the best video on how to remove a mirror. Thank you and I just subscribed to your Channel.
@almamdani6564 Жыл бұрын
One of the best diy videos I have seen. And I have seen more than most. This video merits a like and subscribe for me.
@bran703 жыл бұрын
Great video. Very clear instructions. Thank you. This helped me!
@finalride5 жыл бұрын
That was the best instructional video that I have seen. Thank you very much!
@GreaseMonkeyFever5 жыл бұрын
Thanks...hopefully it helped get the job done. Thanks for watching!
@NearlyNativeNursery4 жыл бұрын
Thanks so very much. Your how to with that style mirror click was the only one that matched my mirror on my 2003 F-150. Great DIY tutorial vid.
@Garagemonkey115754 ай бұрын
Thanks for this video the first one I saw I used little foamy, Dawn dish soap and a small syringe and it just popped right off. Thank you.
@iamthatis252 жыл бұрын
Thank you... literally every other video skips removing the mirror from the anchor, and I couldn't figure which way to push to get it off. I didn't want to push too hard and break my windsheild.
@3hetricks4 жыл бұрын
Thank you for such a great detailed video!! Awesome
@brianclarknumismatistappra60854 жыл бұрын
Greatest instructional video ever! You sir gained a subscriber!
@mscott52583 жыл бұрын
Thank you so much for your very helpful and detailed video. Excellent work!
@curiosity2314 Жыл бұрын
Yes this video was extremely well done. Wish I had seen this particular video before doing mine as it would have given me more relief. Mine felt like it wasn't going to budge but it did come free. Flexing steel on glass just is not one of those feel good moments. 😁
@USAMP926C4 жыл бұрын
Of all the videos I watched, this one was the one made me be able to get my mirror off. Thanks. I don't know if I'd be brave enough to wedge a wrench against the windshield though. I used the screw driver method.
@otarsulava2 жыл бұрын
Very helpful, Thank you! 👍✌
@kennywarren23173 жыл бұрын
Thanks this actually worked. I just swapped mirrors.
@hiteshparashar4 жыл бұрын
Extremely detailed video 👌👌
@GreaseMonkeyFever4 жыл бұрын
Hope it helped, Hitesh. Thanks for watching!
@dhubbard4 жыл бұрын
I just watched this video and wanted to send out a sincere thank you. The video is so well made and detailed. The video takes any guess work out of it. Thank you.
@JS-gh5gm4 жыл бұрын
Best video on this subject! Thank you.
@seanlane8912 Жыл бұрын
This video helped me tremendously. Thank you 👍👍
@richardwasserman Жыл бұрын
Thank you for this understandable explanation. I'm off to pick n pull tomorrow.
@GreaseMonkeyFever Жыл бұрын
Good luck, Richard! It doesn't take a lot of pressure to pry the base...too much will crack the windshield. Use the soapy water and let it sit a few seconds. Thanks for watching!
@sumankishore76423 жыл бұрын
Very well explained... thanks....
@pintaux4 жыл бұрын
Thanks for instructional video,very good explained!
@kronickilla39033 жыл бұрын
Mine did not go back on that easily! Got i finally got it on. Thanks!
@Peter-gq8uh2 жыл бұрын
Very well done.
@pituq1293 жыл бұрын
Great video ever with approved and everything. 👍👍👍👍👍⭐️⭐️⭐️⭐️⭐️
@andyphilpott10503 жыл бұрын
Our mirror fell off in our Focus with backing plate intact. I separated the base plate from the mirror and thought how the Dickins am I going to get that back on. Thanks for this video.
@g.w.vanderhaeghe11222 жыл бұрын
Thank you , this worked fine on my 2014 Ford F150 Lariate (Donnally E8 011083 rear view mirror )
@GreaseMonkeyFever2 жыл бұрын
Glad it helped, G.W...thanks for watching!
@rightandleftish3 жыл бұрын
This is exactly what I needed. Thank you a million for such an excellent video
@GreaseMonkeyFever3 жыл бұрын
Glad it will help. Be careful...you don't need to pry hard. And don't try this if the windshield is hot from sitting in the sun. Wait for things to cool down. Thanks for watching!
@rdeleon03602 жыл бұрын
Great!!! Videos!!! Ty!!! So much for your help. 🤔🙂👍👋
@kdf980935 жыл бұрын
great video detailing every aspect, especially for the mechanically unknowing
@rodporter2381 Жыл бұрын
Mr. Monkey - thanks for the excellent video (my vehicle is 2010 Mariner) - you are the Master
@gman4reel Жыл бұрын
Wow!!!!!🙏🙏 That really helped...💯% ....Exact instructions for my 02 F150 4.2L
@BigEightiesNewWave Жыл бұрын
I was saying to myself before looking, that he is probably a glass installer pro.😇
@lavonn188 Жыл бұрын
Really detailed, preciate it brother
@markzanetti62286 жыл бұрын
excellent job. clear and concise
@blackyeti-qv8cb2 жыл бұрын
Thanks alot tinting a f250 and couldn't figure it out
@GreaseMonkeyFever2 жыл бұрын
Glad it helped, Yeti...thanks for watching!
@oseasrivas53793 жыл бұрын
Great tutorial
@huuge34845 жыл бұрын
NICELY explained.......Thanks
@efrenhernandez87994 жыл бұрын
two days i was try to installer this mirror!! thanks very much!!!
@eduardo50373 жыл бұрын
Thanks bro 🙏
@larrywilson79334 жыл бұрын
Very helpful!! Thank you for a great video!!!
@ManicMechanic0076 жыл бұрын
I know without watching these detailed instructions, I would have either just pulled the whole assembly off or cracked my windshield. Thanks so much.
@GreaseMonkeyFever6 жыл бұрын
Yeah, I had a friend that messed his up, so I went to the junk yard to get another. I was looking for a screw or something...took me a while to figure it out. Decided that maybe it'll help someone else out, so I made the video. Thanks for watching, Manic!
@mbreckwoldt98135 жыл бұрын
me too
@illerob6665 жыл бұрын
Yeah dude knows his shit, and knowledge enough to convey to me, not really mechanically inclined. I did it tho.
@israelflores30647 ай бұрын
Gracias, no encontrare mejore video que este
@MrRockydee072 жыл бұрын
This video is the 👌 saving us the price of a cracked glass. 😂
@cheezr3233 жыл бұрын
This worked on a transit connect. Thanks
@GreaseMonkeyFever3 жыл бұрын
Ford probably used this design on a lot of it's vehicles...and maybe still do! Glad the video helped. Thanks for watching, cheezr!
@carlosfunes26633 жыл бұрын
Muchas gracias m sirvió de mucho
@ilovevsm.comkenmorevintage2150 Жыл бұрын
Thank you so much!
@erictownsend87116 жыл бұрын
Perfect! nice and clear. THANK YOU!
@Harrzack4 жыл бұрын
Excellent vid - great helpful details.
@10hamoud2 жыл бұрын
Thank you💐
@rubjaquez Жыл бұрын
Thanks. You help me 👍
@johnlawson77322 жыл бұрын
Thank you
@odirleitds5 жыл бұрын
Very good, excellent! Compatible with my Fiesta 2014 4 door veichle. I go install rear view auto dimming mirror.
@Nusremmus5 жыл бұрын
Perfect video. Also same mirror for 2012 Ford Fiesta sedan. Thanks much
@ANGELMANNO24 жыл бұрын
Thanks
@user-is2fn3gg3c6 жыл бұрын
Молодец! Очень подробно и все понятно!
@GreaseMonkeyFever6 жыл бұрын
Благодарю. Надеюсь, что это поможет. Спасибо за просмотр!
@sgt.hollowpoint69683 жыл бұрын
Gracias
@manpreetsidhu90174 жыл бұрын
Best video, thanks
@robertlloyd44924 жыл бұрын
Perfect instruction video
@andrewarmstrong73105 жыл бұрын
Funny how the anchor can take the stress of removal and just randomly fall off while driving down the road.
@txlolo4 жыл бұрын
Very detailed... thanks!
@larrya23445 жыл бұрын
What a great video - thank you
@bruceb62624 жыл бұрын
Awesome video
@GreaseMonkeyFever4 жыл бұрын
Thanks, Bruce...hope it helped. And thanks for watching!
@edgararcega30463 жыл бұрын
5:15 i tried using the wrench method and my rear window exploded for some reason. Lol jk. Cool tips bro.
@SAYEGHSAU9 ай бұрын
well done👍🌹
@GreaseMonkeyFever9 ай бұрын
Thank you! Cheers!
@desmondjohnston23435 жыл бұрын
Excellent tutorial. This mirror is the same design as on my 2002 F-150. There are a lot of other tutorials for different designs, and there is some bad information also on handling this design. I followed someone's bad direction and removed the black spring clip and am unable to get it back on the mirror arm. Do you know how to replace it without damaging it?
@profloorsca4 жыл бұрын
I had mine changed twice with windshield replacement and both times I had to take back because the mirror was vibrating/shaking so bad while driving, they fixed it but both times I heard a lot of banging going on on the shop, I think they broke something, anyway why did they not use the simple Allen screw adjustment in there mirrors, so easy to change. 😳👍
@mcalexander94 Жыл бұрын
thanks bro
@GreaseMonkeyFever Жыл бұрын
Hope the vid helped, mcalexander. Thanks for watching!