Hayabusa Powered Mini Car Absolutely Rips!

[@GrindHardPlumbingCo]

We’re proud to partner with ‪​Castrol!Castrol EDGE is the best against high stress which is why we choose it for our vehicles. Find Castrol products here: bit.ly/CastrolxGHP

[@rustzz8]

You and Cboys TV need to do a build off. You both do such unique and fun builds.

[@when_sparkys_drift9498]

Hey, 2 things 1) the vfd should have a programmable ramp start, that when you give if power it slowly increases the speed of the motor. And 2) if he has to spin that motor by hand it’s phase locking one of the phases on the motor lead isn’t connected.

[@ThomasTheVirus]

cant you guys make some kind of vid of wtf happend to will.. we all know it was not only "long drive times" like he said in his vid

[@krotchlickmeugh627]

@ThomasTheVirus nah the kid was a bum. I hate to talk shit. But he refused to learn. Period. He wouldn't even take his damn phone out of his pocket. He left an entitled loser

[@Jockymcbock]

@@krotchlickmeugh627damn man you should go play with your own toys if you're so upset about will. It'll be okay 😂

[@DUBYA-DUBYA]

Man, you need to hire that dude permanently. Hard worker, not camera shy, great attitude and knowledgeable about fab work.. all great qualities for grind hard!

[@johnsherby9130]

Dude is so smooth I forgot he doesn’t Alr work here

[@Arithryka]

not to mention safety conscious! we need a little more of that on youtube 😆 as much as I love the "safety third" "get it done" attitude, it's refreshing to have someone talking about hearing protection and explaining why you don't wear gloves on the lathe.

[@mostlymotorized]

Contingency: he not allowed start every sentence with "SUPER"

[@3067jon]

Reminds me of Stevon from Rich Rebuilds - such a positive mental attitude and super skilled

[@jurriaandejongh8677]

Totally. Love his attitude and professionalism.

[@jeremyswanson2708]

I miss Will but appreciate Patrick stepping in and finishing this project. I was super excited when you started this. Patrick is a good dude and glad he's helping out.

[@Whacintosh]

Patrick needs to be a permanent member of the team.

[@jesseshort8]

Came to say the same thing.

[@Whacintosh]

@@ptholton12he does.

[@pangs33]

He really balances out the jank/not jank ratio

[@GrindHardPlumbingCo]

@@pangs33 We agree

[@Cob637]

No.

[@OtisSpunkmyer2nd]

Put a 2 inch wider rim and tire with the same offset and the rear tire would be more centered, look better and have better traction for that beast of an engine

[@GrindHardPlumbingCo]

We have been getting loads of comments about Edwin's original music so I will post it here 20:25 Akina Boy - Shakespeare's Summer 23:57 Soul Sauce - Edwin Olding 46:56 Akina Boy U-132

[@roadsidegarage69]

On spotify Soul Sauce is under the Akina Boy name

[@ImaFirinMyLazuh]

The pitch of the grinder at 22:20 sounds like it is matching the music, no? Was that a little post edit autotune haha?

[@heartsky]

Patrick bro, more of this please, you fit in perfectly. You're needed, you're wanted.

[@ThirstyFoe00]

Cant lie.. I thought this build was gonna be lost in time with Wills departure. Glad to see you guys still pushing forward keeping that grind going

[@GrindHardPlumbingCo]

Always grinding hard despite the road blocks

[@namepending155]

@@GrindHardPlumbingCo not exactly, “we miss him too”. I suggest finding an honest positive centered on Will and go with that. It does not have to be big. “Road block” is one metaphor away from “speed bump”. I assume you guys are/were friends. You are not some heartless corporation. I’m not an avid watcher; don’t know what you did. Blast me if it makes you feel better. Just trying to help.

[@ZeD69420]

@@namepending155 I kinda glad will left the content seems better now

[@hondamotorsrider]

@@namepending155 I think he was saying his departure was a roadblock, not Will himself.

[@jamesemery1]

@@namepending155 yes seems something happened as he left quickly and nothing was said

[@rustywrx]

30:50 "I'm in welding mode atm, so it's hard to explain".. I absolutely get that! It amazes me when people can bounce between subjects, I give whatever I'm doing 110% of my attention and get real cranky if I'm made to change mindsets lol

[@mikes78]

That's me every day.

[@CircuitBored]

18:23 Patrick: "Use hearing protection or you will go *deaf*" Ethan (shouting): I WEAR HEARING PROTECTION

[@scutesscales6557]

😂

[@Capydachi]

😂😂😂

[@SolitaryCanid]

Now Ethan needs to wear safety glasses.

[@xplayzvr4212]

As soon as I went to the comments as I was ready urs the exact scene played

[@jonnyphenomenon]

Just pulled into the Buffalo chip in Sturgis and got behind that monster bike of yours. And this little red menace came screaming up behind me and scared the hell out of me. Your toys are LOUD!

[@MeesterHead]

I think Patrick is going to make a great addition to the team. I hope he sticks around and isn't just visiting

[@effoffutube]

Great work pivoting to Pat, he plays the crew so well, that guy is worth a thousand hours easy.

[@R2_D3]

31:07 Exactly! No gloves!! The same goes for bandsaws, table saws, drill press, or any other (fast)rotating machinery! This is a safety issue I don't hear often enough amongst KZbinrs! Great for pointing this out!!

[@deckname5794]

Except for the very fast and low torque tools like a die grinder.

[@alebone_]

If you have seen the russian lathe video you'll never wear gloves while using a lathe again

[@josebetinyani786]

Patrick speaks Ethan's language fluently, watching them work together is a joy. Please keep him!

[@chrissugg968]

You guys NEED to snowmobile-conversion this machine once winter hits. Thrashing around the snowy slopes of Idaho, in comfort, with the heater on.

[@abehemry5972]

I came here to comment this

[@davidanalyst671]

with the heat on!!!!! lolz

[@chrissugg968]

@@davidanalyst671 just sitting back in shorts and a tshirt with the radio on, while everyone one else is in padded ski suits.

[@itsyaboikirbo]

assuming it actually snows, last winter they didnt get any

[@Nordic_Mechanic]

oh yeah

[@CLGravy]

Dude, the stuff you guys could build with this guy on board. Let's go. He's great on camera, super knowledgeable, and skilled.

[@mandem9319]

5 minutes in and the bro drops "you only have to do it once when you write it down" I feel personally attacked.

[@JW-fq1ec]

🤣🤣🤣

[@danafaulhaber334]

Yet he still managed to somehow mess it up an the bike wouldn't start once it was hooked it up to the cars ignition..

[@lucasnygaard]

One of the better episodes! Even for me who don't have huge mechanical background. Hope the new dude is going on permanently! Such a good vibe :D

[@at20rule]

I love how this guy works and explains his work

[@CaptnBlack94]

Consider this another comment cheering for Padric!! That dude is great and really brings a LOT to the channel, which is already chocked full of talent and cool shiz. I can't wait to see more builds coming up with all you guys.

[@Zman98]

Padrick the new Will, let’s see it. Sucks Will left but having another hands on for 2 projects at once is a game changer… Plus his energy and enthusiasm is unbeatable, hire that dude!

[@UncySpam]

Imagine having a new team member who doesn't have to do constant punishment pushups 🤣

[@FredKennedyIV]

Patrick rules. Hope he sticks around for a while! Way to go dude! Love your vibe, and you obviously come with a lot to add to the shop.

[@MeTheTherapist]

Got to wonder was he a last minute replacement or did they plan this out.

[@WisconsinSummers]

@@MeTheTherapistnah he’s not a replacement.

[@MeTheTherapist]

@@WisconsinSummers he literally replaced will in this build...

[@WisconsinSummers]

Yea but he has been around for awhile and is just more prominent now that will is gone

[@MeTheTherapist]

@@WisconsinSummers ive been watching for years. Didnt ethan just meet this guy on the humvee trip like weeks ago?

[@rens9313]

@Edwin, your voice-overs are getting better and better! I like the info and tone of your voice!

[@88Frank]

My favourite part of the video was when Edwin said "wanna do it" about getting the dirt bike to start the lathe 😂 Welcome to Grind Hard Patrick haha

[@spudgun1590]

Patrick's immediate "NO" got me, he knew Edwin wasn't joking 😂

[@EdwinOlding]

I am not known for having the best ideas 😂

[@redtide941]

Patrick is the man. Sick to see someone in the garage that can almost keep up with Ethan and has good vibes

[@birddog435]

Idk if Patrick is a permanent addition… but he should be! He has skills, and fits right in. Can’t wait to see the monster chopper in action again!

[@jaggoff100]

Patrick is solid. Knows how to wrench, enjoyable personality, fits in well with the squad. More Patrick.

[@murymih]

This is the one KZbin channel with the most cinematic shots and angles in every video....the random drone shots bring a very refreshing feeling 👌👌 Africa watching. Nairobi Kenya 🇰🇪🇰🇪✌️✌️

[@mikej557]

Patrick is officially cool! Great on camera and an excellent engineer. Eathan barely needs to supervise at all. I still miss Will but he was a liability around the workshop. 😂

[@EdwinOlding]

So happy to see this thing in one piece! It was tragic seeing it in pieces parked on the hill next to the Chang Li’s 😢 next step fenders, paint and drag slicks!

[@robsmith4651]

I was thinking it would never get finished. If you guys need help with anything when in sturgis get ahold of me. Have a safe trip.

[@jasonfuller6527]

Bring him on board permanently! He's a perfect fit to the crew. 👏🏼

[@K3NnY_G]

Oh man, with these two running the show now.. This thing's gonna SEND. Shame we'll probably never go PLACES YOU CAN'T EVEN WALK. I love the shiny new Fireball table is just a fancy workbench.

[@fvpaquetqc]

Man patrick is a great addition, great skills and looks like a chill dude! And new lathe nice!!!

[@VasilyBuilds]

Hayabusas are about to become rare

[@MaldonadoMoto]

Ayy Vasily here too!

[@rabbyredpath3598]

@vasilybuilds your quads badass! Busa powered 3 wheeler against the quad would be a fun race to watch

[@Jacobtheunwise]

They already kinda are

[@calholli]

ZX14 Master Race

[@helium5912]

People have been doing this a long time. They are not going anywhere.

[@sunroameroverland]

Damm dude it was just last year, we were in to your shop watching GHP and you were saying’ you just wanted to build cool stuff😉. Like that…And now here you are. So proud of you man. Much success my friend!!!

[@mandrakejake]

A lathe upgrade is well overdue! That old girl has done her time and made itself proud 😊

[@blackshaggy]

At least fresh blades.

[@dakotareid1566]

@@blackshaggyfresh blades?

[@traveltofindme2147]

I’m so glad to see Padric doing what he does best. Super cool dude! I have enjoyed seeing his builds for years, and always wanted to go help in his shop. Too bad I moved away.

[@Knotaro_bot]

Roll starting the lathe is about the most grind hard thing ive seen you guys do in a loooong time 😂 Never ever change ❤

[@GrindHardPlumbingCo]

We never will

[@Obvsaninternetexpert]

@@GrindHardPlumbingCo change the way you start the lathe though lol

[@connerlabs]

@@GrindHardPlumbingCo Connect the converter straight to the motor and it should start fine

[@gorillaau]

​@@ObvsaninternetexpertGreat idea. Add a pull start to the lathe.

[@travis89]

New dude is what this channel needs. Tbh

[@garrettwright9979]

Y’all… his name is Padric 😂 I agree though he’s a great addition and incredibly talented!

[@angusmcguckian7314]

Yeah Im with many of the other commenters, Patrick is great! LIke his camera presence...chill, fun and knowledgeable.

[@Silbar89]

I'm not saying Patrick is better than Will. Not at all. What I am saying is that Edwin and Ethan seem to need a third and Patrick fits very very well into that slot.

[@RobertRonnethy-i2e]

Patricia is a loser

[@paultergiest2341]

Patrick is legit. The dude definitely has his own sauce to add to this meal.

[@Nathanbowles-lo5bx]

will Will never be replaced

[@Silbar89]

@@Nathanbowles-lo5bx not in our hearts. Also he's got his own channel I'm watching now.

[@jasonbirch1182]

Patric is absolutely better than will unless you like idiots. I really don't.

[@SeanHodgins]

With that wheel offset its perfect for the circle track!

[@stum450n]

3 things stood out in this video: Patrick grinds hard - more please Hints at adding boost to the busa - yes please The tree house bike is still there - revisit? Please.

[@tracemiller1334]

I haven’t watch grind hard in quite awhile. I really like this Patrick guy. He seems very knowledgeable and ambitious. He makes a great addition to the team

[@0xyZ_Official]

It's so sad that Will is not involved in the completion of this project. He put in so much effort and was so happy to see the results with the engine fixation. You could see he was so proud 😅

[@ianj8505]

I have a feeling Will wants to do more adrenaline stuff. Like BUM is sort of a means to a really fast and dangerous goal. I could be wrong but he seems like an adrenaline junky.

[@GrindHardPlumbingCo]

We wish he was still here for it too

[@krotchlickmeugh627]

No it's not. He sucked. He had no skill. He wasn't good for teaching. He was a bum. An ungrateful one at that

[@TheRealAlpha2]

Shame Will wasn't here for the completion, but If he ever gets back around to visit you guys I bet he'd be stoked for what the Solo is now though.

[@krotchlickmeugh627]

@TheRealAlpha2 nah the guy is shite

[@callumflack4122]

this is one of the best mechanical minds ive seen work, props to this guy man. great work.

[@Benzy670]

It's very refreshing to have Patrick around (is that how he spells it? Lowkey sounds like y'all are saying Padraig like the Irish). He's such a good fit for the Grind Hard crew. I don't mean this as a diss to Will whatsoever, but he felt like Ethan's padawan while Patrick feels like another jedi lol

[@podgem-l4t]

No they're pronouncing it wrong if it was in Ireland, but as a fellow Pádraig, its all dependent on what yer mammy calls ya

[@tinyrodent2821]

5:10 - wait until he hears about the great design of the Porsche 987. Mid engine, battery in the front, but it's an electronic bonnet (hood) so if your batter dies you have to jump a fuse to open it to get to your battery (or take off your wheel and wheel arch to pull a manual cable)

[@Rattus-Norvegicus]

Thank you guys soo much for getting another guy with some common sense.

[@MikeSchmidt-qt7ls]

Its so cool to see the skill of designing, machining and installing metal to create works of mechanical works of art is alive and well.

[@dondesormeauxrcadventures7551]

I like this guy, he is a natural fit in the Grindhard family. Image what Ethan and him can accomplish together

[@InfamousSabreMods]

THANK YOU for not dragging out this vehicle build with a multi-video series

[@coreypokorny6356]

Full stand immediately means confidence in your work. It’s a good thing.

[@MikePowersTSIG]

It's a total ripper. Can't wait to see it really rip!

[@Adamantiis]

This is my first video of this channel. No idea of the history behind the dudes here but I'm amazed to find out through comments that Patrick isn't a permanent guy. He's enjoyable to watch. Very wholesome dude and extremely talented.

[@endersothergame]

OK I'm new here, but definitely not leaving. The gent named Patrick needs to be in more episodes, unless he has been and I haven't seen them yet. His energy is a very good fit for the team you have going.

[@elrevelde04]

Not gonna lie, the first thing I've noticed on Ethan, besides he being extremely hardworking, it's the fact that he always carries his eye protection plugs everywhere. I got used to those small plugs too, not only at work but also when working at home. They're really cheap and easy to carry/wear

[@andrewwagner942]

that heap of solos at the begining is crazy, all that work for them to just end up like that

[@FloridaMan0561]

You guys have some of the sickest projects that I have ever seen,definitely one of the best fabrication channels on KZbin for sure!

[@mass-cp6jf]

ponytail hair dude is cool as hell.

[@KrisDecker]

I love GHPC long episode this one was an exceptional one. A casting call video one might6 say to fill the void. Patrick is an amazing part of the team I hope he stays permanent if not come and goes! What a showcase! VIBES!

[@blackbuttecruizr]

Patrick seems like an excellent fabricator!

[@katanapopup9589]

Great job guys, maybe in future it might worthwhile making a foot operational clutch, then you Don't have to worry about clutch fluid running down your arm.

[@Adventure_Van_Upgrades]

tuning in from the uk guys , new video format is working great , i really like the longer instalments of premium shenanigans

[@OldIronOffroad]

Starting to be one of my favorite channels!! The ingenuity and craftsmanship in these crazy projects is amazing!!!

[@ThePlainswalker13]

I miss Will, but Patrick is an amazing fit for the team. I hope everything works out.

[@DullBoyJack]

Me too. I do think that Will added a different dimension to the channel. The lower end projects felt more accessible, and it has been really fun to watch his progression. His fab skills definitely leveled up right before he left the channel. All the best to everyone involved, and hopefully they end up doing some kind of channel collabs in the future!

[@dannydenike171]

some OG beats from some of the older videos you put out are nice to hear again. SLO MO and beats are what I think we need more of, it makes your videos feel so special

[@aserta]

10:25 my dude, refit the gibs. Seriously. Even if you did, that type of lathe is infinitely adjustable until the gib or way is worn out. If your gib's worn, then you have to make a new one. There's a reason these have been around since before either of us were alive. :))

[@hugobiddlecombe504]

Yeah, when he wobbled it and made no comment about adjustment i went 'hmmm' but having that 'new' lathe and someone who knows how to use will make all the difference.

[@NexusNoxCS]

Going back to this video after Patrick has been part of the crew for a little while really feels like it was meant to be. And everybody knew it from the get-go, 4 months ago. Welcome home, Patrick! This is where you belong. And we'll be here cheering you on making cool new stuff!

[@althejazzman]

No-one ever likes to finish someone else's abandoned project, but Patrick is going a fine job.

[@Jarok3]

Fine job?😂😂😂 Do you see how off center that wheel is? It leans over when the suspension travels, he effed this project up😂 great job😂😂😂

[@althejazzman]

@@Jarok3 It's just a bit of fun. Try and enjoy yourself for once.

[@ElevatedFabworks]

@@Jarok3making a jack shaft or engineering an entirely new hub in 7 days wasn’t feasible. If you have input on how I could have centered the wheel with the hub I had on hand without moving the engine out of center by a ton and completely replacing the subframe Will built, I’m all ears.

[@Jarok3]

@@ElevatedFabworks saw you rolled it, will you now admit to it beeing really dumdum to put the rear wheel offset? Instead of taking your time and doing it the right way, you did a hackjob and look where it got you, now it's ruined and can't be replaced, all because you rushed it/didn't do it properly. Wouldn't you agree that it would be better to have done it right and still have it? It's not like you guys don't have other things you could've taken to the event,things better suited for the environment if you missed the deadline and just do it right.

[@ElevatedFabworks]

@@Jarok3 there was 0 potential to get the wheel centered in the timeframe allotted. I never said it was perfect, but it sure ripped and was a blast to drive while it was around 🤘🏼 luckily all was good with me and I was OK. It’s all fun and games man. I knew like everyone it wasn’t perfect, and I’m totally ok with that. But it served its purpose doing burnouts and it even was mediocre off-road. I just should’ve been more careful while driving.

[@jagharingenyoutube]

I am sooo glad that they got someone else to build this. I like working vehicles

[@donec4n]

Loving the vibe in this video - Patrick is wholesome AF.

[@jesseshort8]

Rule of thumb I use: no gloves if you're taking the work to the the power, gloves ok if your taking the power to the work piece.

[@Sinerwray]

When you're done with it, can you give it to 'Aging wheels?' Someone rolled one of his thanks.😊

[@neonnerd1364]

I'm bummed that will wasn't a part of finishing this since he started it but I'm glad that it didn't become another dead project like the electric tank.

[@Jockymcbock]

I'm still holding out hope on the tank 🤞

[@mikeclarity5121]

Me to ​@@Jockymcbock

[@neonnerd1364]

@@Jockymcbock I'm not lol. They've mentioned it once since they just let the whole project go and that was how long ago.

[@ThomasTheVirus]

this car would do good with a double wheel setup and the sprocket inbetween them for stability

[@x_ph1l]

That tiny Milwaukee angle grinder was life-changing for me

[@KaosProject21]

yeah Im seeing that

[@TheSmokingMustache]

M12 line has several smaller tools that completely change things, just the little rotary tool is insanely nice to have

[@tomothybahamothy]

Great for stealing tiny catalytic converters

[@l5robling]

Great content; love hearing fabricators who have not worked together compare differences and discuss methods.

[@DangVegan]

Is it just me or is Patrick like the mountain Blake Wilkey.

[@mke723]

You nailed it.

[@gidi1899]

very inspiring ! I imagined while watching: Dividing the car back to hourse and carridge in the sense of: - back tire + engine - the hourse - want to fight the ground surface to get any amount of drag used. - front cart - want to reduce the bounce, have a smooth ride, lightly ground touch only to redirect the car. And both can have stearing :) It's like when rock crolling, you send the cart on the the track with minimum sharpness to up-down movement, but the heavy lifter or pusher wants to be a track rather than a wheel for rock climbing, it's track is based on friction rather than elevation issues.

[@joshmartin7924]

I cant believe will is gone. I understand you gotta do what you.have to do but he was just falling into the groove with you guys. Wish him the best and i know you guys will continue on like usuall.

[@mandrakejake]

We all liked Will on the team but he decided to move on, and we will be OK.

[@julianturberfield7101]

Ultimately, he's just not an off-road guy and Grind Hard is all about off-road builds (mostly).

[@offgridas]

I didn't like Will at all, and many others felt the same I subbed to this channel a long time before him for Ethan content personally​@@mandrakejake

[@joshmartin7924]

@offgridas oh yeah i have been here since the first pink barbie mustang. Yeah the whole premium thing was getting a little over board. But like i said i will always love ghp and bringing in new people is something that will continue to happen. Im along for the ride

[@adams4425]

Thanks for this! I hope you guys are enjoying Sturgis and showing more of the world how ingenuity, creativity and ambition can produce 'Things You Never Even Seen Before'!!! Nice episode

[@Ben_onwheels]

27 seconds is crazy

[@Koltwood-tr4kt]

2 minutes

[@BlondeHairWithBangs]

10 minutes is arousing

[@It_Is_I_I]

I love these kinds of cars, small, light, aerodynamic. Its just practical, i want something similar for a daily

[@Katquincy-v3p]

I'm new... And a girl... But it looks like a bike rear-ended a smart car and never came back apart. Js. High-five. My husband is currently raving about something mechanical or another right tf now and I've no idea what he's saying but he sounds like you guys in some sort of shop-dog way. I'm sittin' here doing art while I listen to you and he watches, enjoying a Voodoo Ranger and I guess what I wanna say is thank ya and if ya ever wanna soup us up in a creative-freedom away, we got our home "MamaShasta" here eager for some love. Much love, EyeAhm & ThangQ. 💜

[@jont8707]

You all need to hire this guy if its possible he knows his stuff and great personality and not to mention his awesome work ethic 👍🏻

[@samdiguistini368]

I hate to stay it but after watching this channel for three years this is my favourite video you have released you NEED to have this man on full time

[@rufusonline]

Patrick fits so well into the grindhard team. Love his energy - especially when he he said ‘grindhard graveyard’ - WE WANT PATRICK

[@KatMandew0]

Great job!! The late great David Saville Peck started putting the Hayabusa engines in the Lotus Caterham Super 7 cars back in the early 2000s. Fast AF!! The 0-60 was around 3 seconds (3.2)..It was known as the fastest road car available in Canada back then. I believe his son now runs his shop, Super 7 Cars Inc.

[@PushingData]

This episode was so much more enjoyable with Patrick as a team member in the shop. Will was funny and entertaining for his first couple episodes, but his type of content is only enjoyable in limited quantities.

[@hageltje96]

Wow, I love watching you! It's nice to see all the cool projects. Greetings from the Netherlands.👌

[@Tommy-Tom-Tom]

Patrick's west coast chillaxification vibe adds a nice dynamic to the Canadaho tribe. Prob packs a decent peace pipe too.

[@thailandretromods]

20:33 with the music and "things are going to get better" That's almost a Fred Again level banger! Some vocal effects and that would be a sick track! ❤❤❤ Props to the editing team.

[@GrindHardPlumbingCo]

Thanks man! Put a lot of love into this one - Edwin

[@popie]

Give him a job, such a nice guy, great work.

[@theraggededge6652]

I loved Patrick in this video, I hope he sticks around!! Great attitude and great on camera! Awsome fabricator and fits in well with the rest of the crew!! Seems like it would be silly to not keep him around. I hope you can!

[@JustBenWhompTruck]

Padrick is a homie. Keep him around!

[@RantingLoudly]

Exceptionally good advice regarding using shop tools and equipment! Well done.