How Do I Use My Laser Level?

[@RikoRey92]

Brother you're so humble, may all the blessings shine upon you

[@SteveMasonCanada]

Tip: If you're thinking of getting a photo tripod for it, don't. Get a studio light stand. Most are 9 feet tall, and cheaper.

[@katiesink4642]

Thanks, Steve, how do I know what the thread size is? I'm on ABT's website, but it doesn't say thread size. Are they pretty standard?

[@SteveMasonCanada]

The smaller laser levels should be 1/4 inch. I think most light stands come with a 1/4 inch and 3/8 inch reversible adapter.

[@HeelznBarbellz]

Came on here just to figure out how to install the batteries lol Of course you taught me so much more!! Love your page! 😊

[@FastTrackSigns]

Thanks! My struggle is always needing a horizontal level line 8-10' high and no photo tripod goes that high.

[@dalexfilms]

@@katiesink4642 The most typical tripod thread size is 1/4"; bigger pro units may use 3/8". Light stands also use these sizes. The stand's specifications should tell you this info.

[@lauraanderson5569]

I bought this on Amazon from the link. As a result, Amazon suggested I also purchase beard balm. I ... I lack the gender required to grow a beard. I will forever think of this level as the beard balm level, and laugh. I hope it gets lots of use, laughter is good!

[@percyfaith11]

I've seen beards on individuals of both genders.

[@eternalklothgardengangsta685]

Pahahahaha

[@MohammedAli-1]

@@percyfaith11 lmao

[@drbhay]

it’s not for your beard …

[@GannDolph]

@@drbhay 🥺😳

[@pavel0900]

Used one of these bad boys to do the bathroom tile after watching your “how to tile a bathroom” video. My wife and her mom were super impressed with the results. As far as I’m concerned, if these two women in my life are happy, I did my job. Thanks Jeff for all of your suggestions 👍🏻

[@AlMai222]

Good job brotha

[@mariosavva999]

Happy wife, Happy life

[@EmbraceTheMatrixFineArt]

This is hands down THE best channel for DIY information and this guy's delivery is so honest and straightforward and it's because he's Canadian, but that's okay! 👏

[@MrJawnyNumFive]

I always say to myself WWJD... What Would Jeff Do...🤔

[@TheBabaYagas]

100%

[@chrismee3083]

a little bit of advice, don't listen to him, he hasn't got a clue. I'm a tradesman am 31years and people like him boil my piss.

[@kairu.kun.z]

@@chrismee3083 you sound like a guy who doesn’t like tools that make people better at their jobs

[@coreygavin9134]

@@kairu.kun.z As a tradesman of course he doesn't want the average joe getting his hands on tools that simplify everything...noone wants their marketable skillset to become obsolete or overly common...Technology is a double-edged sword...Revenge of the nerds indeed lol.

[@Sebeerful]

I’m an electrician in Australia, bought my dewalt green laser today, it looks so cool - I’m going to love using it to level everything- and I mean everything 🤙🏼

[@demef758]

I completely agree: a laser leveler is a fabulous product. The problem with red is that if you want to do any outdoor work (Jeff specifically says "interior" in this video), then red is a bad choice. You cannot see it in sunshine, and you will barely see it in the shade when the sun is still up. You have to wait for dusk. The solution: get a GREEN laser. The human eye is far more sensitive to green than red, so a green line can be seen far better than a red line. Sure, it's still hard to see green in direct sun, but it CAN be seen outdoors, unlike red! I just used my green leveler today, with the sun shining bright. I "painted" a horizontal line where my deck surface is going to be, and I could see the line perfectly all day. I could not do this with my old red laser, so I sold it and am now the happy owner of a green laser. I realize Jeff makes money on this red DeWalt, which is a fine leveler, but ONLY for interior work. If you want a more versatile leveler, get a green one.

[@zakzak4393]

Mann I didn't know anything until I start looking at your vidoes.please keep being honest.dont sell out .you're the man.

[@reubenmiller7988]

Contractors everywhere thank you for recommending that customers keep an eye on their work with a laser level

[@chrismee3083]

😂🤣😂🤣😂. i kept expecting him to just keep looking into the Lazer. he sounds like a DIY know it all and a tradesman's worst nightmare 😂🤣😂🤣

[@mpethybridge]

God forbid a homeowner have the ability to protect themselves from being ripped off with shoddy work.

[@RivieraMan]

This is getting ridiculous! Every time I go onto KZbin, there is Jeff on the right, with another interesting video to watch! When I finish my house renovation, you will have saved me a fortune - by giving me the knowledge and confidence to do stuff myself! Thank you soooooo much!

[@TheRealPhoenix_Retromods]

I bought exactly the same 2nd hand from amazon. For ANYTHING needing level I use this: fixing shelves, cabinets, big picture frames, etc. So much easier than the bubble on a level. Never looking back.

[@teresanietoaraujo2770]

Just got this a few days ago. Occasionally we lose power in the heat of the summer here in AZ and I wanted something that would easily run my 8000btu garage window ac. Unpacked the unit, followed the quick start guide, gave it a yank and it started on the first pull. It was quieter that I expected it to be, very smooth running and ran my window ac without missing a beat. I'm sure it will have no difficulty with adding a fridge and maybe some lights. Well worth it.

[@t3jem]

I put off getting a laser level for years. I borrowed one when I installed the subway tile in my kitchen. I had my own before I returned the borrowed one, it is one of the most useful tools I own.

[@nevermindthebull0cks]

I would recommend a 3 line laser level instead of this 2 line one. The 3 line will work as a plumb bob allowing you to layout on the floor and then use the level to accurately mark the ceiling. Useful if you're installing lights or trying to get a pipe straight up through a ceiling.

[@Claryshandyman]

Been watching for years now (on another account) and now I have built up the skill and confidence to start my own handyman business ! Thank you so much for all of your advice and knowledge man

[@screaminpotato]

These things are awesome. I used them to finish my basement and they are invaluable. I hope people follow the link so you get a kick back. You deserve it.

[@__BenDiaz]

This was 3 years ago and you sound very genuine. Thanks for the info

[@MovieMakingMan]

I did as Jeff said and shot 2 contractors who weren’t using laser levels. Now I’m serving 15-20 in Huntsville prison. Luckily I’ve been assigned to a construction crew so I can use all of the tips Jeff taught me (other than the shooting of contractors). I truly admire Jeff for all his great ideas, except the one exception I just described. Oh well, at least I get conjugal visits twice a week.

[@thegreatgazoo]

That attaching to the metal corner piece was genius for me. I'm putting up curtain rods today using this idea! Thank you so much Jeff!

[@antireconciler]

I also did not consider that. Very smart!

[@rty1955]

Hey Jeff. Just an FYI about another use of using these laser levels U had to level the soil in my backyard. 100' x 100' I tried to use a water level but instead came up with a great idea that worked awesome! I tool my laser level mounted it on side of house (height doesn't matter) I took a 2x4 next to laser level and taped my cell phone to the 2x4 where the little camera was right at the laser line. The camera is way more sensitive to this bright light even though in daylight I could not see the red line. I could now take the 2x4 around my backyard and moved the 2x4 up/down until I could see the laser line very bright on my cell phone. (Even in bright sun) the difference between the bottom of the 2x4 and the ground told me how much soil I needed to add to be level! If I had to dig out soil so 2x4 would go below soil line before I could see the laser light on my phone, that would tell me how much soil I had to remove! Brilliant idea!! I found it MUCH easier than a water level! Try it out. Perhaps do a video on it

[@ravneiv]

If you have one I'd use an old cell phone. The laser could burn out or damage the camera sensor.

[@rty1955]

@@ravneiv the power level of a laser diode is not that powerful. It was fine. You could always place an ND filter in front if your concerned

[@kalanib8505]

Bought this exact level 2 weeks ago. It has already justified the purchase. I don't know how I lived without it.

[@Brad-bh5ie]

This is hands down the best channel for anything DIY! The only thing I’m still searching for is an outdoor storage cabinet/entertainment center for my deck under the roof and below the mounted TV

[@mrtaktiks]

He's the best: straight-forward no BS, knowledgeable, talented, witty. That said, from your #1 sycophant, can and how to use my low-level (ha!) Bosch laser to grade a sloped ground level for a travel trailer. I do have a tractor with a box grader. But the lot slopes considerably and I need to figure out how much fill to order. Thanks!

[@djbloodshot]

"The kitchen looks amazing, but its not because im amazing. The tool is amazing!" Cmon jeff give yourself some credit mate. Youre pretty damn good.

[@bloodxviii7546]

thanks, i do Maintenace Contruction and learning to use this is awesome will make my life a lot easier.

[@martinofny]

Followed your link and it’s $111 on Amazon! I have one but just bought another one!!! Never saw it at this price!!!! It’s my go to laser!

[@poeticsilence047]

Love your modesty. A man who is good at his craft and loves doing it.

[@michaelobrien6107]

What a coincidence I just had my electrician level my new counter plugs on Thursday using a friend's laser level. So easy before drywall

[@HomeRenoVisionDIY]

Well done michael.

[@purrungas2012]

Love this guy humility, very talented to the point. Tells it like it is

[@ttfweb1]

I’ve got one - and I don’t hate it. That’s the best review I give on anything.

[@saltyroe3179]

In the 1970s took a surveying class. Skill and expensive optics were the requirements. This is such a better solution for leveling

[@longbra]

I missed the drawing, but I'm sold. I just purchased one. This will come in handy in so many ways. I'm scared to go through my house to check on the work that has already been done. Could you consider creating a video showing what to look out for when purchasing a newly constructed home? Maybe this tool could be used during a walkthrough of the house to find shoddy work before it is too late. I'm still discovering hacks and cover-ups done by professional contractors in my house after living in it and maintaining it for 15 years. Some things you don't notice until you have to go and fix, replace, or maintain something.

[@GreggoryThorpe]

Always the channel I turn to for anything DIY!

[@chrismee3083]

😂🤣😂🤣😂🤣 i would love to see your house.

[@GreggoryThorpe]

@@chrismee3083 I’m Renovating a rental property right now and I’ve posted a couple of videos on my KZbin channel

[@moguga6357]

I used Leica, Hilti and Stabila lasers. Incredible instruments, well worth the money.

[@jeffg4884]

I bought a cheap laser level for hanging canvas prints, pictures, curtains, acrylic, shelves etc in the home we just purchased. The laser I bought isn't as fancy as this one but every project I've done I've thought to myself this is the best purchase I've ever made why didnt I buy one sooner. For $20 it has saved me so much time and everything I hang comes out perfect and a one shot job. Do yourself a favor and buy one I never regret it except that I didnt buy one sooner.

[@synewparadigm]

What brand?

[@TinManKustoms]

As a restoration contractor I use mine daily for drywall removals. I have the green one by dewalt it's much easier to see on certain surfaces. I also have the Bosch one where you can do angles.

[@nevinkuser9892]

That's awesome. Probably the most useful tool on a renovation.

[@harryl7946]

Bought a DeWalt laser level before the kitchen remodel. Comes in handy on a whole lot more too.

[@handfull357]

Best DIY channel on youtube for house mods and remodel's 100%💪💪💪

[@J_bui]

Love this breakdown! I'm always looking for a tool that can be used for a lifetime and this is one of those you can use for both basic and complicated DIY tasks.

[@msven]

Perfect! I was standing at Home Depot a few weeks ago, not sure what to buy and confused which was good.

[@mattmills7138]

lmao i feel this

[@minnesotanice369]

I'm a computer ninja this is right up my impatient alley and cure for my add negative patience for tedious ass shit. I wanna6 send this dude some scotch

[@shahramzamanimortazavi9464]

How humble you are. "Everything is level, not because I am awesome, but because this tool is awsome" I like your awesome attitude.

[@christineturner2767]

Luv my Dewalt laser level. Used it to install a Gabion basket wall in the lane way. Just waited until dark and set all my lines and markers. Professional finish!!

[@donl3381]

Jeff, can you do a video on Chimney repairs? Tis the season where most are cleaning their gutters etc before the snow arrives and like myself I'm sure most are also coming across issues with their crumbling chimney bricks & concrete top copping. Also perhaps you can also film a video on chimney liners. Much appreciated Jeff. Great content that's actually helpful for all of us viewers & everyone else in between 🙏 👍👍

[@normzolmos9134]

Love your videos..I'm a female that wants to learn and find your videos so helpful

[@mangphiamphu1868]

I just bought my own laser (dw088k) a few days back and have been using it for installing aluminium framed partition for my shop. I also use it for installing electrical gauge box and like you mentioned, it makes me look like a PRO although I’m just an amateur. 😁

[@dalesworld1308]

I have a Bosch, but any laser level makes you so much better than you thought you were.

[@borys444]

I always wanted to hear what u thought about this level. Hopefully for Black Friday this thing goes on sale. Suggestion going forth: do a tool review on some of the newest tools out. Most ppl including myself absolutely love a solid tool review. Cheers!!

[@MrBrody21]

Check out the “Concord Carpenter” channel. They do great tool reviews for almost all price levels.

[@Chris-xc1tm]

Got one on your recommendation what seems like years ago. Got a green 2 axis 360° Huepar on sale on Amazon. Dewalt was a little pricey. I use it all the time now. Even for hanging picture.

[@kevinintheusa8984]

I have the same green 2 axis with red plumb line. I use it to level floor joists in our renovation and also tiling the floors. It is a great tool for the price and I added a small metal stand that is adjustable up and down from 1 inch to 14 inches which makes it great for floor joists.

[@xTheConclusionx1]

Just bought one for metal framing. This is definitely a game changer for the ceiling. Trying to get my dad to get away from the chalk line lol

[@drazar6847]

That corner bead tip was priceless.. Thank you.

[@ecp711]

Bought one because you sold me on it. Hung a large pin board and drilling all the holes was a breeze! Waaaay easier than using a bubble level. Now I just need to find more things that need leveling...

[@sandywoolf2883]

The video explains very well, which is exactly what I want to understand. I bought a mini laser level that belongs to this renhotec brand 2 months ago. After using it for a while, it feels very helpful. The price is not expensive anyway.

[@josephfrank4382]

Im a little late to the pump on this video- but the level is awesome and its the tool I needed to help me level out the ceiling above my basement shower. Thanks for the tip Jeff! Also thanks for the Amazon link....

[@jimchang9394]

We are using laser levels everywhere to build high rising apartments. It's really convenient when you layout EMT, align pot-light boxes, and argument with framers.

[@keithturner.i7vi908]

I made that exact mistake renovating my master bath...measured off my bare cement slab floor (live in south Florida) to relocate my two electrical boxes by Jack/Jill sinks... which as it turned out, slab was about 1/4 - 3/8" of an inch out of level. Sure enough, when installing the counter top on leveled base cabinets my receptacles, which luckily are about 6 ft apart, are off about a 1/4" from top of counter backsplash. Could have been worse, will not make that mistake again and will be using your solution - Thanks!

[@chiraq1256]

I never used one but I’m will be getting one using your information this Friday. I usually measure from the floor and hope the floor is even. I ve you not been doing this now going on 2 years. I love your videos. I’m getting better faster

[@chidote1howtodo]

I've been following you for a year now, finally have the gumption and courage to start finishing my basement and ordered this laser from your store, I'm excited to get started!

[@affordabledesertliving3487]

Great info pal. I am mathmatically challenged and so really need a good laser level for sure. Thanks so much.

[@jamezason]

Watched your DIY subway tile and figured you had a video about the laser! Thanks for sharing the knowledge! Will be sure to use your link when I purchase one.

[@shericreates]

I found one along side a road. It was buy a park so there was no construction, houses, nothing but woods. The on and off switch doesn’t work. I think I’m going to take it apart to see what’s going on. Won’t hurt as long as the batteries are out. Always try to fix everything as much as possible.

[@georgewheatley1]

i have the same laser level , i am a electrician and for sockets fused spurs in a big kitchen looks great so i never do them without it

[@sailpac]

I bought this when you showed it on the ikea cabinet video which I wound up installing. It was great to have and worth every penny.

[@bobpage682]

Do you have any pots on what to look for in a nail/brad/staple gun? And instructions on how to load and use each nailer, brand recommendations?

[@jeffthewhiff]

I am about to install a suspended ceiling for a customer of mine, however, I am a painting contractor by trade and do not have a need to use a level regularly. For now, I am going to rent a laser level just for my project because I will be installing a suspended ceiling on concrete block walls.

[@LSpalla]

I have one of those, I went with the green laser line, works REALLY GOOD and trust me, you will use for a lot of things if you are into handyman stuff I use from hanging picture frame for fancy customers to installing cabinets and tiles

[@The9mmProfessor]

Jeff ! thanks for all you do. Your videos are big time confidence builders. We need to completely renovate our bathroom. I am going for it !!

[@andyflick2986]

Hi Jeff- great video & Love all your videos. I bought the leveling tool per your recommendation. Suggestion for another future video would be how to move a GFCI outlet. Everybody's mounting TVs, cameras, projectors, etc. Basically need to know how to retrofit any room with a GFCI, assuming a nearby GFCI already exists but is just in a suboptimal location. Keep up the great work with all these videos. love your kitchen too. Andy (San Diego, CA)

[@klinkster1955]

2.3 million subs and Jeff is always heaping praise and selling so many DeWalt products, why aren't they sponsoring or at least sending goodies to him to test??

[@billyblackie9417]

Very handy if you're doing a concrete floor and putting in the frame surrounding before you fill in with concrete

[@tomprovan50]

just did a t bar ceiling and made a 2 foot metal square tube to hang laser off of to adjust to the exact height, did not need to measure up that said I like the idea of using the corner bead also in certain circumstances great idea

[@ktmidol]

I will buy one for my house renovation project.

[@2-old-Forthischet]

Many years ago, I found a simple Stanley laser level at Ross for $10! What a great find!

[@stans5270]

I've got that one and it works great. The hardest part is putting in the batteries correctly.

[@stuartfarrell6729]

okay I finally bought one after years of not having one It is great for inside work but outside it is a no-go what would be your go-to laser for outside when doing dry stack wall / retaining wall doing layout by one self for such using string is a major time killer

[@redwaikikamukau2459]

I don’t know how I would use this yet, but I know I want one. 😁

[@EvanDunville]

I already had a lazer and was lookong for some tips on using. Ypur video certaly helped!

[@lornes7526]

I'm on my 3rd Dewalt crossline and highly recommend it. I like it enough to have spent the couple hundred bucks more for the reciever, so I can use it outdoors. I also have a Bosch laser tape which is so good, Jeff needs to do a video on them.

[@asawoszc]

Will be using my laser level to install my new bathroom floor LVP tomorrow. I may as well check the electrician's work while I'm at it. He just measured the height from the subfloor when installing the two new outlets.

[@karenpayne3946]

I ordered the last one can't wait to use it! Thanks Karen.

[@Unc1eMike]

I've had the older model of this laser level (a DW087K) for years, and it's embarrassing how long I used it before discovering it would stick to the corner bead. This revelation was a real game changer. When replacing it with a green laser, I wanted that same capability. Unfortunately, the green model (DW088CG) didn't stick during my tests. It appeared to stick at first, but over the course of 60 seconds of slid down the wall about 1/4 inch, and rotated a bit while doing so, causing both the horizontal and vertical lines to drift. The model in the video (DW088K - why don't you mention this?), song with the models I mentioned before, lack a pendulum lock. I was willing to ignore this if it stuck you the corner bead though. For DIY use, where the tool won't be transported regularly, I think the lack of a pendulum lock is not a deal breaker, but for professional use I think a pendulum lock is all but a must-have feature.

[@alienx99]

Thanks for mentioning the model # since non of the links work anymore!

[@4philipp]

Will this help me be a bit more level headed? Laser labels are also awesome for garden design projects. What we perceive to be level in the distance can be quite a bit off. I had a laser level in my wishlist for a while...one day...

[@HomeRenoVisionDIY]

Great point!

[@fordpowerstroke2012]

My suggestion for anyone buying a laser is get one with the green laser if you can. We used a few red ones of different brands in industrial construction and if there was any sort of light in the room you could barely see the laser. They then got us one with the green laser and wow what a difference that made. Even if the sun was beaming on the laser you could still see it clear as day. Just a personal preference. Only downside is I think the green is a bit more expensive because its a stronger laser.

[@trojanhorsey]

I put wooden flooring in my living room with stairs and a cubby hole. Flowing into a hallways and a cupboard. With no visible joints. And that's down to your guides and confidence in me that I could do it too. Thanks Jeff.

[@jhl22222]

First... I have been a long time fan of this channel. For this video though, perhaps I missed something? The title is "How do I use my Laser Level" and I feel it missed the mark. In watching this video I learned nothing about using my laser level. Instead, I learned "Why one should own a laser level." Perhaps the title should be changed?

[@handymanglenn8443]

Hi Jeff, can u do a vid on router trimmers? How best to use when finishing and what bits to buy? Thanks

[@mindricangabriel553]

Thank you ! After this video , today in 2 hour I solve a job that befor take me 2 weeks!

[@googleuser1006]

Learned a lot of stuff from you over the years thanks man!!

[@timothyjohnson4285]

Very useful content. I've watched many of your incredible videos, and they were ALL valuable and well done! But that crack about taking the project mgr. behind the BARN was pure GOLD! ( Everybody knows what goes on behind BARNS? it ain't pretty. )

[@jeff-shantz]

Great tip on sticking it to a corner with the magnets. I saw that and thought, "Oh sure, that works in his house -- probably won't work in mine". Tried it out and it works just fine. Nice not to have to drag out a tripod.

[@joeholmberg250]

I have this in my amazon cart (through your link), and hope my wife sees it 😉

[@krsl5837]

i just bought one with the green line , tomorrow im checking the boxes in the kitchen remodel im doing

[@stretchhurion6702]

the Dewalt looks good I bought the Milwaukee M12 with the Plum dot on it works Great thanks for all the info

[@synapse49]

Just bought one of those dewalt levels a few weeks back for my father-in-law. After a summer of fussing over old fashioned levels, checking and rechecking after each step (and never getting the adjustments quite where we needed them each step), I figured it was time we brought a little technology into the job. Nothing like saving DAYS worth or work because you've got a red line exactly where you need it.

[@danielhammer7148]

Honestly bought a green laser level because of you. Love it.

[@thistooiseds3215]

Borrowed a Bosch version. Making a huge difference in a two room complete gut remodel! Great tools!

[@guyrogers3410]

Jeff, I just ordered my DeWalt Laser for Dec 1delivery!! I am a pretty handy person who is not afraid to try nearly anything. KZbin channels like yours is making my life so much less stressful and YOUR channel is the GOLD Standard for DIY how-to videos. We take ownership of a fixer upper Dec 16 and I'm getting really excited to try out your helpful tips for patching drywall and crown molding!!! THANKS and have a Blessed Thanksgiving and Merry Christmas-eh. Not a Canadian and HATE snow so Myrtle Beach is more to my liking. 😎

[@jamesdevore5171]

This is my favorite DIY Channel!!!

[@Starcrunch72]

Here's another extra tip--the cheaper lasers aren't as bright as you may need. I bought the $55 kit from Harbor Freight...while it does work well, its not as bright as I had hoped for

[@BadAppl3OC]

Back when you did the kitchen backsplash video, I ended up buying the green dewalt laser level that comes with the rechargeable dewalt 12v battery. Excellent investment!!! Cheers!

[@lucyfabbri8865]

Thank you. Because of you I had my husband buy one. Use for everything! Love it! Yes. Everything comes out perfect. 😉