Diy Large Foam Mate Kits Instructional video

This is the complete instructional video for the assembly of the large Foam Mate DIY Kit.
The Honey Do Carpenter invented the foam Mate to inject foam into concrete to make air crete. Air Crete is lightweight, Fire Proof, and bug resistant. We use portland cement mixed with foam to create air crete. It has great insulation qualities and budget friendly. Darwin has also made a mini crane to lift the gables and beams.
Check out our shop
www.etsy.com/shop/HoneyDoCarpe...
Check out our website:
www.honeydocarpentershop.com/
Email
[e-mail]
Send Mail to
Honey Do Carpenter
PO BOX 51272
Idaho Falls, ID 83405
Pinterest
/ honeydocarpentr
Facebook
Honey Do Carpenter
Hydrated Lime:
amzn.to/2umLys6
J lube:
amzn.to/2KA7Kot
Gloves:
amzn.to/2gFXUo0
Glasses:
amzn.to/2gFkz43

[@lysleanderson9137]

Wonderfully informative- thanks!

[@yoavcohen66]

Wow thanks very much ! Keep up the good work

[@timfox5698]

Great video, Mr & Mrs Honey Do Carpenter! Looking forward to buying one of the parts kits once I get back to work - been out of a job for a couple of months so looking forward to earning income again soon and then I'll order a kit. Unfortunately the cost of shipping the kit to Australia is nearly as much as the kit itself and the conversion rate adds another 25 percent then there's the Australian Goods & Services Tax of 10% as well - but it is what it is and the Foam Mate is a great little tool so I'm looking forward to getting a kit sometime after Christmas.

[@melinda5777]

This popped up again, so i watched the entire thing, thinking about that BLT, I wasn't going to buy!!! 🤣🤣🤣🤣🤣🤣

[@controlfreq9346]

Cool video. I have to add a few tips. As others have stated some of these, I am condensing. 1 ALWAYS use primer, BOTH parts. Glue on BOTH parts. 90 degree twist once parts are seated, this will even out the Glue. 2 Barbed fittings can be tough, SPIT (or liquid soap) on them and/or the hose then insert. MUCH easier. Larger braided hose requires a heat gun. (1 1/2 in +) 3. ALWAYS use Teflon tape on threaded fittings. Not just to stop leaks, but also easier to screw together AND take apart if needed. And finally, why the 20ft walk to your rinse barrel? Put em side by side FFS. LOL!

[@allenhyman5003]

I just came across this awesome video. I've seen your other videos, but not this one, very detailed. I'm going to check your site to see which sprayer I need. I hope you ship to Asia. 🙏

[@heavenboundhomestead126]

That helped out a lot.

[@tubularguynine]

Great instructions, Darwin! So all your customer needs to do is put all the hose clamps in the middle of the tubes FIRST and snug them so they won't fall off. I used to work with hydraulics, and that's what I did. A good post-glue headache remedy. 👍🏻

[@mahmoodbm5973]

Gdv5xbxbxrcjfcu Chccbcnfvd Dgdhfbg Dhgjcfcevdgfxb Sgdn6 Ghdncbgdjxhf*'jxif

[@Elhoussaine-benabed]

Good job bro

[@rebeccahaughn8677]

Hi, going to order the large one so I have to wait til next pay and then I will have enough money to order one. Thanks for dong all you do.

[@TonyWadkins]

Thanks for your videos ! One tip.....you technically should be using the Oatey green transition glue for the joint between the black abs and white pvc pipe. The Oatey All Purpose glue can be used to join abs to abs or pvc with pvc but not between abs and pvc. Will it fail ? Probably not.

[@fevolenko3995]

Also are ALL the threaded and barbed fittings etc the same as the small one?

[@rizansulaiman8241]

Hello One quick question If its possible to change the metal filter to sponge type like dishwasher sponge?

[@leventyukselen9063]

Thanks

[@fevolenko3995]

Is the black pipe already capped at the other end?

[@shawnncheriyoung3597]

With the tapered-end fittings, you can break the fittings if you tighten them too much.

[@z1catfish]

I got an old cement mixer, curious if it could mix up aircrete... Inspiration to build something, figured if you have it, why not use it?

[@cherryblossomgypsies]

I was wondering the same thing. I have big projects to do

[@michaelmay3137]

Please paste link for purchase thanks for sharing

[@carlosmauri9468]

Gd am. What is the purpose of the s/s wool? What is the req'd pressure of the air compressor? Thnks

[@magicdaveable]

Come on Darwin. Using Channel Locks backward? As usual you guys have produced another excellent video. I was wondering if you determined the minimum C.F.M needed from the air compressor. My air compressor is literally an antique. I am 70 and it's older than me.

[@HergerTheJoyous]

Really all it needs is about twenty PSI. I would add a pressure regulator on the tank for safety. That way you can adjust the air pressure at the tank and you won't have to worry about the air compressor regulator. This isn't a standard part that comes with the foam mate. I would definitely make the investment.

[@markwilson8118]

What foam setup would be best for me .. I want to be able to make like 4 to 600 gallons of aircrete a day .. I'm gonna build and use a bunch of 2x6 to 2x10 forms .. undecided about form size yet to make blocks .. Any suggestions? ??

[@parkerfairfield201]

would you share links to the airform gun / set up you made?

[@orlandocardenas5912]

EL VIDEO CONTINUARA?

[@MrJohnbtg]

What's the reason for the use of braided hose?

[@maggseb]

Would this work t shot concrete to the wall?

[@arnoldgenanda2374]

Is it posible to purchase the kit from the philippines?

[@kumargreen4781]

I have watched many of your aircrete videos and am curious. How thin do you think it can be poured and stay structurally sound. I am in the process of making an ammo can stove for camping and was thinking of making some thin aircrete plates for the sides and bottom, i would love to here any ideas you have 😁

[@xgonzalez1691]

Hi send me the link I want to buy a foam machine maker

[@mohta1987]

Hello Mr & Mrs Honey Do Carpenter. Have seen many videos about the foam gun.. but nothing is more informative like this... just have few questions as below :- 1. You have not mentioned anything about the Air compressor or the pump which has to be used to generate the foam or is it like we need only the air compressor (how much pound of air pressure needed) to generate the foam 2. Can we use the sprinkler head in the front end so that we can spread the foam

[@pamcolechadwell1302]

I don't even have an Air compressor yet. Hey, I emailed you a few photos's of my papercrete birdhouses. I know your backed up but I'm just letting you know I'm not spam lol

[@FreeFoodAndMedicine]

Question. Your website says the product is $188; but when I click the link, it says the product is $350. What's the difference between the $188 product and the $350 product? Or have you not updated your website to match your store?

[@mikevickers4727]

Did I miss something? Why no scrubby material in the tank?

[@murrayekong7669]

Would like that you put up a diagram of finished installations to assist in clearer understanding of the system

[@mikevickers4727]

Hose clamps with a 5/16 hex head are much better, and there's even a cheapie hand tool that's set for x torque so that you don't overtighten and damage the hose

[@nabeelcheema6976]

After watching your cool video, it is amazing idea make at home and save money 💴..! Can you give me link where can I buy this kit or all necessary tools. I try ebay but could not find .. I hope that you will reply to me

[@HoneyDoCarpenter]

Try this! www.etsy.com/listing/714124477/large-foam-mate-and-wand

[@slpcaptansarkhan8178]

Many thanks. Informative stuff. Kindly advise if you can share diagram as well. I am living in other part of the world and it is not easy to import things here, your vedio is been watched world over, the benifits shall also go world over. Kindly include diagram and short vedio the how this works. Stay Blessed. Warm personal regards.

[@FixItYerself]

2:05 Thanks for the excellent idea! There's about 50 feral cats running through my yard.

[@donaldasayers]

I have a zip-tie drawer.

[@jdog4534]

Actually, pvc primer is used to soften up the mating surfaces and to let glue penetrate, which creates more of a welded effect than a glued effect. Also, that 4" black pipe looked to be ABS, which requires a different kind of glue to get them both to mate. The thing about ABS is that it's used only as waste pipe, which is typically rated to handle only 5psi. PVC will handle much higher pressure, however, it should not be used for air pressure more than 5 psi due to the fact that should it ever fail, it blows up in slivers of shrapnel . Hydraulic pressure is different. When there Are hydraulic failures aren't subject to Boyle's law.

[@greenhometony]

Yes primer is essential. Also not mixing pvc with abs. Of course you can do it, but why? Air pressure is moderately dangerous on pipe containers if the fittings fail because of poor glue joints.

[@lancerudy9934]

Three fittings

[@asharamahirwar9399]

I want to know what's material used to prepared foam

[@ssmotor00]

How come you don't ever talk about a pump like the little dragon system, or do you not need one in the one you use, do you just the air compressor with the gun?

[@jaswindersoin4410]

Can I buy one from your site?

[@HoneyDoCarpenter]

Yes you can on etsy honey Do Carpenter

[@carbonxhawaii]

Hey D...Could u p.m. me...I have something to share. Thanks

[@michaelanderson9792]

You two are so cute together comic relief couple

[@lancerudy9934]

You should use primer

[@lancerudy9934]

Feed the cat!

[@billrussell7672]

You should not make the foam liquor chamber from black pipe the glue will not stick to it like white pipe. The white pipe with white fittings is rated for 200 psi, which is double the working pressure and fits in same standards for saftey. By selling black pipes glued to white joints you become liable for failures and lawsuits.. if people and property are damaged . What your doing is awesome. But please change this one thing Also a diverging nozzle at foam outlet would be the thing like a rocket exaust

[@greenhometony]

Could you describe what a diverging nozzle is exactly?

[@billrussell7672]

@@greenhometony like a old rocket nozzle where the velocity changes to volume Think "Cone"

[@greenhometony]

@@billrussell7672 to be honest I know what you mean but other people might not. I have a shop full of tools and building materials. Most all of these guys are winging it with parts and construction with no explanations. When you are trying to sell things it's easier that way. Describing how things work so people understand the dangers and nuance would be good. You have to pay for that but what you get may or may not actually teach you the nuts and bolts, just how to build something. Just an opinion.

[@billrussell7672]

@@greenhometony people don't need to understand the mechanism of Æther trans dimensional spin out to know gravity can be dangerous. Exoteric science that falling is enough. Nominal standardized science quantifies the rate of fall and the kinetic conversion potential. Metaphysic science identifies the mechanisms across boundaries that we cannot see smell touch or taste ( the materialistic data). Our knowledge as humans also follows this pattren, it is to what degree our interests take us and our human form allows us to interrogate this space/time in our suits of biological substance. Our minds are not materialistic or quantifiable not limited by anything other than our curiosity's inverse proportion

[@greenhometony]

@@billrussell7672 ok bill.....

[@vickydubey4615]

कौन सा केमिकल है आप बता रहे हैं इंग्लिश में हमको समझ में नहीं आती है इसको हिंदी में जरा बताने की कृपा करें और जल्द से जल्द सामान का कहां मिलता है कौन सा रो रो मटेरियल है जवाब दें

[@lancerudy9934]

Wrong way

[@wheyez1]

Do you know what the most dangerous tool is in the tool box? A flat head screwdriver, and pushing it at the other hand. Suggestion, get a nut-driver.

[@lancerudy9934]

You need primer!

[@a.i.5673]

150 euro + shipping for 30£ parts??? really???

[@Cp3659]

Check again. A lot higher for the parts than that.

[@theinkbrain]

Hey guys, if you want to do small jobs, you can get a foam cannon from Amazon from $14.00 up! Forget this stuff, Amazon is your friend.

[@tyler496121]

I think it would be easier to watch if you didnt get interrupted during the explanations.

[@DaMalat]

Horrifies me to see these kits or home builds using compressed air and not a single safety valve or pressure relief valve in sight. If the outlets in that tank get blocked in any way, you've just built yourself a potential bomb ! Even a hand pump garden sprayer has to incorporate a safety valve by law if it can be pressurised to a given value. Could you please add a simple pressure relief valve to the kit ASAP. The ones used for large hand pump garden sprayers are ideal and only cost around $6 - $8 to buy.

[@Gcrilla]

This is beyond nitpicky, if you cant safely relieve pressure if the outlet becomes blocked, you shouldn't even be using the thing. The bomb analogy is nothing but overdramatic.

[@guyperret4753]

He is no serious, he didn’t ship the package I paid for a foam cannon and do notre reply to emails.