AirCrete Foam Wand

Ready To Stop Guessing about how Make Your Own AirCrete foam wand as well as how to actually make AirCrete then Stack it into a dome? Buy Our Video Training & Start Now!
Build an off-grid cabin. Complete house building video course from bare ground & foam machine to move ready. Learn step by step how to do everything including solar, electric, plumbing, air-conditioning, flooring, nano tech paint, and more:
tinygiantlife.biz/aircrete-vi...
2019 WorksShops:
tinygiantlife.biz/2019/02/25/...
Join List To Get a Chance To Win Free Workshop or Video Course:
tinygiantlife.biz/share-win-f...
Video Course:
tinygiantlife.biz/aircrete-vi...
STOP, AirCrete May Not Be For You; Survey:
tinygiantlife.biz/2018/09/25/...
List Of All Parts You Need To Build A Foam Machine!
www.amazon.com/hz/wishlist/ls...
How does an AirCrete Foam Machine work?
Just like blowing bubbles through the bubble wand soap coats stainless steel wool and air blows tiny bubbles through the tiny spaces making very fine bubbles.

[@thomasmurray4717]

Excellent demo.

[@PamBum28829]

Great video , easy to understand...

[@IronMan-yg4qw]

great vid. great wand. this is the first vid on with clear instructions on making a foam wand. thx a lot!

[@TinyGiantLifeStyle]

All you need is an input to the wand. 1.2 gallons per minute water pump and 4cfm @ 90 psi air compressor with adjustable regulator. T or Y the input together into a single line and feed the wand. It's magic.

[@IronMan-yg4qw]

@@TinyGiantLifeStyle sounds great. thx

[@dragonflyhfc]

Awesome video

[@janiegoodman6301]

Wonderful

[@hectorcalderon3011]

Play whatever music you like it's your video. I appreciate the information.

[@DaMalat]

Great video. Instead of the work to insert the metal rods to prevent the steel wool from blocking up the end, I use a small piece of chicken wire and roll into a loose ball.

[@TinyGiantLifeStyle]

Sure, it works I have used stones when in a pinch and out of country

[@alamjahangir1043]

nice intraction .thanks

[@balloney2175]

intraction = instruction

[@garyschumacher3081]

Have you checked out the nano bubble?It may be similar.I was thinking if you had a barrel of water with the nano bubble in it first,then used that as well.

[@leoncryp8182]

12 V pump 120psi I assume, what about the volume/minute ? See a pressure valve, what is that other blue circle thing next to it?

[@MASTERSAIS]

My foam generator don't need a wand to make foam. I'll post a video asap. I found this out after building a wand. Then the house I attended fell off and was spraying foam all over my porch. O the fun in learning new hobbies ♡ it

[@TinyGiantLifeStyle]

Density of foam, size of bubbles, and rate of production are important

[@MASTERSAIS]

@@TinyGiantLifeStyle I'll have to do a video with both now. Dam it

[@isenbergj]

Is the foam solution just pumped into the wand.or is there air from a compressor used as well. Need more details on the connections prior to the wand. Thanks.

[@TinyGiantLifeStyle]

Air and water are pumped into the wand at a T or Y it really is just that simple

[@billsimpson2392]

00:40 Please tell me, What is that component after the Air Regulator? Is it a solenoid? and is the white rectangle box above it purely an on off switch for that solenoid? Great video, Thank you.

[@TinyGiantLifeStyle]

You got it 👍 It's that simple.

[@golfinguna]

Funny I have been watching these videos today.....I got a plastic jar with a threaded lid, squirted a bit of washing up liquid in and added a bit of water shook it for a couple of minutes and had a jar full of foam.....Simples. Now I just need a bigger jar and a worlds strongest man contender to shake it. LOL. Better still a bucket, drill and paddle.

[@glenpetrie5453]

Great video. The next time can you not include the background music - it makes it hard to hear you.

[@TinyGiantLifeStyle]

Yeah, it's a clip from the video course. The music was added for "mood'. I will keep that in mind

[@ronjackielavelle4712]

I don't understand why people have to add the music because you can't understand what is being said.

[@alsettle2776]

@@ronjackielavelle4712 Don't you remember how they always played music in the classrooms in school, college, university etc? Oh, wait. They never did. It's become a plague on youtube instructional videos lately, apparently because the self-styled 'youtube' gurus claim it makes the presentation better. Or something. I find it annoying as hell.

[@Jimmo10101]

Thank you for your responses to the various people. However, I/we are visual l learners. Would you be so kind as show us. Thank you and blessings.

[@TinyGiantLifeStyle]

I have a video that shows the build. Much more details and complete build in the video courses: tinygiantlife.biz/build-your-own-aircrete-home/

[@HergerTheJoyous]

It would be easier to drill the holes centered in the caps from the inside. There's usually a little point the manufacturer leaves behind when they make it.

[@TinyGiantLifeStyle]

Very True!

[@HergerTheJoyous]

@@TinyGiantLifeStyle l like the stainless wire idea! Do you use the same pump that domgia does?

[@lancerudy9934]

Where is the foam container?

[@joeltrinidad9217]

Do you have at build video OF the machine?

[@TinyGiantLifeStyle]

The full build video is part of the video courses: tinygiantlife.biz/aircrete-video-training/off-grid-aircrete-round-tiny-house-step-by-step/ tinygiantlife.biz/build-your-own-aircrete-home/

[@jaxel7691]

Very creative. So simple and basic. (Kinda brilliant, actually. hehehe) Good job, and thanks for sharing. I just have to be ridiculous for a moment though... It's "National" Pipe Thread, not "normal". Little things like that matter when talking to other people... And you're using your channel locks backwards. Turn them around the other direction when tightening something. That's how they're designed to work. I'm just sayin'.... :)

[@martinguerschunyrealstate]

Hello!!! I have a question!! I have done the same , but i used a T and not a Y (couldn't find here)... All is working but i cant regulate the air , so is coming very liquid... Could be that? or just is not working my regulator? thanks a lot if you can answer!

[@TinyGiantLifeStyle]

Could be a regulator. Could be your stainless wool is packed down against the exit fitting. Could be your air compressor is to small.

[@littlebeavercreekhomestead311]

All Easter Island head identities were protected in the production of this film.

[@TreasureGeo]

Are you using an air compressor to push fluid or a liquid pump?

[@TinyGiantLifeStyle]

No. It's easier to get the volume & control by pumping water and adjusting the air.

[@sandralima3235]

@@TinyGiantLifeStyle What pushes the soap solution. into output chamber?? What pushes the air into the output chamber? Could you PLEASE HOW AIR AND SOAP MERGES INTO OUTPUT CHAMBER?

[@nico1001s]

What foaming agent are you using ?

[@TinyGiantLifeStyle]

Drexel

[@PhilVerryChannel]

Wow this music is laid down loudly throgh a lot of this video

[@TinyGiantLifeStyle]

Oops

[@willdeburr]

you don't need the pump , the air can be used as a sump as well , there are vids about it

[@TinyGiantLifeStyle]

At what rate/volume of production and at what foam density?

[@balloney2175]

@@TinyGiantLifeStyle I already bought air compressor, so I don''t need the pump.

[@balloney2175]

this video is easy to follow but what about the previous to this where the connections to the air pressure is shown and other stuff

[@TinyGiantLifeStyle]

This is a shortened clip from an online video course that teaches everything you need to know to build an AirCrete dome. tinygiantlife.biz/build-your-own-aircrete-home/ Of course there is also a video on the channel that shows the process of making AirCrete and assembly of blocks.

[@RussellBlade]

how did you put that machine togather? that is awsome setting it up on the wooden board.

[@TinyGiantLifeStyle]

I wanted to to be easy to see and understand how the machine works. There is a complete parts list here: amzn.to/2UoveC4

[@quietlike]

How much all in to build all necessary tools for aircrete? Not cheapest route, but most convienent for a not so handy guy.

[@TinyGiantLifeStyle]

A basic foam machine will cost about $170 and the Air Compressor rated at 4 CFM @ 90 PSI about $300. Forms can cost $400 and upwards depending on size and materials used. Slip forms save money on form materials. Depending on if you build a large house a forms all the way around or just a small section to build a little at a time can greatly affect the price of forms. Making bricks could save some cost on forms, but increases the work.

[@taidelek9994]

Why some foam wand end mouth is not as small like yours? Is the making process for bigger mouth is as same as this?

[@TinyGiantLifeStyle]

It just depends on how you are injecting the foam. They are made the same way. A larger outlet is better.

[@taidelek9994]

@@TinyGiantLifeStyle And you tell the pro and con of protein base foam. Does if give extra strength to the block?

[@TinyGiantLifeStyle]

Acrylic can give extra strength to the block. Proteins in the foam mix strengthen the bubbles, not the block.

[@taidelek9994]

@@TinyGiantLifeStyle what kind of acrylic is it? Acrylic cement?

[@howellelizabeth]

Your version of the phone gun is very simplistic and I appreciate that at the same time I purchased all these parts like a solenoid and the pressure gauge in the pump and this that and the other and there was no instruction on what to do with that when I watch this video so I'm not sure what to do with these parts I'm not an inventor of electronic I do follow recipes it hasn't been anything the video I just watched that tells me how to build the mechanical end of this so far so I don't know what to do with all the parts or which way to turn to achieve the ability to operate the foam gun will you please let me know how to build this with the components arrested for Amazon 2 operate and push the foam through the the wand I mean give me some link that you have that I missed and appreciate it very much oh and I wish I had the money to go and take your I'm actually using aircrete to help other people I'm helping my friend get her house together and building a French drain for the back of her house and also her septic tank broke so I'm trying to get this together so I can build a septic tank for my friend her husband. She's a widow and she's been going through a lot of no struggle and so I'm just trying to use aircrete to help people you need to put your health that I can get with the knowledge of how to get the ball rolling is appreciated beyond belief

[@TinyGiantLifeStyle]

Wire power to switch, connect switch to one wire of solenoid & pump. Take the remaining wire from solenoid & pump and connect together with netural wire from plug. Connect pump output with solenoid output into a T or Y. Then the remaining hose connection goes to the foam wand. Connect air regulator output to input of solenoid, connect the input of air regulator to air hose. Finally connect input of pump to hose and place in foam solution with filter and weight. It's really simple. I'll try to remember to post up the details.

[@arielgalvan5996]

no se oxida stainless steel?

[@TinyGiantLifeStyle]

acero inoxidable de calidad no se oxida

[@acefreaky2988]

Just what I thought, it was standard iron wire wool.

[@arielgalvan5996]

Jajaja

[@lancerudy9934]

You need primer with the glue.

[@TinyGiantLifeStyle]

You can use it, but at 40 psi there has been no problems. Definitely good practice though.

[@angeldeluz1398]

do you conect to an air compresor and a water bomb???

[@TinyGiantLifeStyle]

It connects to an air compressor and water pump

[@Study-ju7et]

Give me aircrete foam make material

[@Iliketoweldandbraze]

Now that I know how to make it what do I do with it make shaving cream

[@TinyGiantLifeStyle]

You can spray crops, trees, have a slip & slide party.. or you can inflate cement 6 times in volume to make a studio or house out of this inflated structural insulating foamed cement.

[@Iliketoweldandbraze]

@@TinyGiantLifeStyle thank you I just I know there was such a thing as lightweight concrete I'm just not sure how that would how you would mix that also I'm talking into my phone that's why sometimes sounds funny but I think you know what I'm trying to say thanks again

[@TinyGiantLifeStyle]

I have a video showing the whole process here: kzbin.info/www/bejne/inulnWyki8Shpsk. It's a pretty basic buy all the elements are in the video. Be sure to sign up for the email list in the link from the description because I will have an introduction to aircrete course available in the next week or so.

[@MegaBobtube]

u didn't show us the connections from the source of water with soap so we cannot complete how to do it

[@TinyGiantLifeStyle]

There's other videos already

[@Accumulator1]

Looks like a mess. Maybe too high pressure. No control valve to shut it off/on. Need separate control on the amount of liquid/soap injected.

[@TinyGiantLifeStyle]

This video, as the title says, is just focused on the wand end of the machine. It is completely controllable to have exact foam weight produced fast, but not overrun the rate it can be mixed into the cement.

[@timwilliams632]

Accumulator1, appreciate what you were given. You are welcomed to post a video showing how to do it better. Go ahead, I'll wait.

[@nitrousman8882]

Not sure I’d buy any from a company that spells “coming’ that way”

[@TinyGiantLifeStyle]

That's ok, I wouldn't choose to sell to anyone who chooses to not comprehend substance over imaginary rules of spelling. Be blessed

[@Liberallez]

The voice-over technique is very nice but...the "music" is annoying as hell!!!

[@TinyGiantLifeStyle]

No music over video course instruction. Just on free content

[@IIIDaemon]

..hard to watch trying to drill that cap..

[@davefaulkner6302]

If you add a set of stop pins at both ends, then you won't need to worry about which end is which. It should then be bidirectional. Also your drilling practices are downright dangerous, and you should at least clamp down your material to the bench before drilling....if you don't have a vice use some vice grips. You'll lose a finger if you hold things with your hands while drilling or injure your hand. Drills are powerful tools.

[@ritchiecassidy9151]

fk up drama queen lol