How I setup my ATEM MINI PRO for Broadcast & Livestream - The Complete Tour

My Patreon: / stephleefilms
My Instagram: / stephleefilms
Buy the ATEM Mini Pro here: www.alanphoto....
Watch the official Black Magic Design announcement of the ATEM Mini Pro here: www.youtube.co....
We did an official FIRST RUN and SETUP of the ATEM MINI PRO after the unboxing and first look last week (Watch the video here: • UNBOXING & FIRST LOOK ... ) and did a Complete Tour of the console, showing you our COMPLETE SETUP and explanation of each function and the possible real life uses of it. Watch until the end for a very comedic short video we did using what we learned from this video!
I buy all my latest camera gear here at MS Color! bit.ly/SLFMS-M...
#atemminipro #blackmagicdesign #creator #panasonicgh5 #videographer

[@StephLeeTech]

Hi guys! After 2 months I review the Atem Mini Pro ISO and how it stacks up against the Pro version. Should you upgrade? Watch it here kzbin.info/www/bejne/b4vVnmqjmbOff9E

[@KevinKolbe]

I've been considering getting an ATEM Mini Pro for my set-up and found your video. Fantastic overview, very easy to follow, and even answered a lot of questions I didn't know I had. Well done. Thank you

[@StephLeeTech]

Thank you Kelvin. I hope my videos have helped you in some way.

[@StephLeeTech]

Hi everyone! A lot of comments seem to mention there is some lag/stutter/shuddering etc during certain time frames of the video. However I have looked back at the raw file recorded directly from the console closely and found there is no lag/frame drop etc, everything is very clean. It could be during editing and rendering of this final video that caused the stuttering. Hope that clears up any doubts regarding the raw file recorded direct from the console. Thanks for watching again, appreciate the comments! Steph

[@terrenceshaw6927]

Mr. Lee, thank you so much, this was by far the best tutorial made for beginners. Thank you, Sir.

[@shawnebrown]

This was the BEST ending of all your videos i have seen!!! Thank you!

[@StephLeeTech]

Thank you Shawn!

[@alcomproduction]

Thank you. I am trying to learn and setup my studio in my office. I appreciate your video

[@StephLeeTech]

Thank you for watching!

[@U2TV_Sportscast]

Steph, that skit was funny. I watched a couple of ur ATEM Mini Pro videos already. Very informative. I don't know if U did a video dedicated only to hook up of wires yet...but I love to see a video like that. All of the videos I've seen, people just zip pass that section of the hook up. I'm personally having a problem with hooking my HDMI to my Samsung smart tv. Always, keep the videos coming...awesome stuff!

[@StephLeeTech]

Hi Umoja great suggestion! I might do one of these videos shortly, a startup from scratch. And thanks for watching!

[@U2TV_Sportscast]

@@StephLeeTech no problem...I subscribed, I'll be looking out for it and the other videos on the ATEM Mini Pro.

[@ALMStudios]

Thank you for fun and detailed tutorial over this hardware. Much appreciated!

[@bankitandphila1880]

Thank you for this video. It was really helpful 🙌🏼

[@MrJosephlamour]

This the most informative video regarding the ATEM I’ve seen. I still haven’t found any info about using it with Zoom or FaceTime. I’m using an iMac and a GoPro hero 8. I have all of the correct connectors as well. Thank you for this though.

[@StephLeeTech]

Hi Joseph thank you for the support! Zoom and MS Teams usage, I am actually working on a video on that right now so keep a lookout and subscribe for notifications when I release that video!

[@amansharmaphoto]

Port 4 laptop. Is it the same laptop you connect atem with Ethernet adaptor as well. I see videos people attach their atem with wired Ethernet to wall or router for internet. But I see you attaching atem Ethernet to laptop.

[@GusaTravels]

You have very essential information. Thank you Sir

[@StephLeeTech]

Thank you Gusa for watching!

[@aminoacid8814]

Yo dude, amazing content! In-depth and very easy to my brain cells! But I've got a question. Course your setup is by connecting your wireless mic into your main camera 1. So your audio comes directly from your camera then through Atem Mini Pro. What about your Camera 2 audio? Assuming you have a wide angle shot of you and your guests for your Camera 2, Will the audio be capture via Live stream at the same time if you connect a wireless mic into your camera 2? Is it possible to have two audio source that are connected to two different camera mic input and activate them using the Atem Mini Pro? And please share more videos about new gadget and keep it the way it is! Thanks for this amazing videos once again!

[@StephLeeTech]

Hi Amino Acid thanks for your kind comments! The audio is taken from the hotel/DJ's mixer. Cam 2 has no audio. And yes you can use the AFV Audio Follows Video function on the Atem Mini Pro to trigger which audio you wish to get from the respective camera. Hope this helps!

[@aminoacid8814]

@@StephLeeTech - Thanks for your reply Steph! So far no one go so in-depth, so please dont' stop! Alright, but is possible to have both cam 1 and cam 2 AFV mode on? Or only can be cam 1 AFV on and cam 2 just activate the 'On' button below AFV button? Basically, wanna know if it's possible to have few speaker talking at one go while output to one speaker?

[@keithchester4425]

Hey Steph, awesome video. Very informative. Hopefully the Atem Mini Pro gets to the USA soon.

[@StephLeeTech]

Hi Keith! Thank you for your kind comments and spending some time to watch our videos, I truly appreciate that! I last checked BHPhoto and Amazon and both were still under Pre-Order status. Have you put in your order yet?

[@keithchester4425]

@@StephLeeTech Yes I pre-ordered with B and H Photo. Trust God I get it.

[@StephLeeTech]

@@keithchester4425 Im sure you will Keith! Let me know your thoughts after you have done a first run yourself, I'm interested to know what you discover! :)

[@keithchester4425]

@@StephLeeTech I sure will Steph. I am a novice with some inexpensive gear. I use mostly for church. You can see some of the stuff I put out at Bethel Church NYC. Steph, on that note, can I do green screen directly from ATEM Mini Pro?

[@StephLeeTech]

@@keithchester4425 Hi Keith I've just posted a new video on green screening with the ATEM Mini Pro here: kzbin.info/www/bejne/hWfZeaOFgKuIrZo

[@QippysChannel]

Thanks for this review, btw I wanted to just ask I have noticed that some of your video looked like it had some jerkiness throughout parts of this review (i.e. at 6 minutes 5 seconds you can see this) , was this by anyway chance caused by the the camera settings, Atem Mini pro or the recording to ssd ? Just wanted to know as I am preparing myself for a review unit myself so I want to familiarise myself first with what to expect from it, Thanks

[@StephLeeTech]

Hi Qippy! Thank you for your comments and for watching our videos! Yes I did mention that a few times when a few other people saw the stutter and lag, I wrote this comment and pinned it a few days back "Hi everyone! A lot of comments seem to mention there is some lag/stutter/shuddering etc during certain time frames of the video. However I have looked back at the raw file recorded directly from the console closely and found there is no lag/frame drop etc, everything is very clean. It could be during editing and rendering of this final video that caused the stuttering. Hope that clears up any doubts regarding the raw file recorded direct from the console. Thanks for watching again, appreciate the comments! Steph" So answering your question, there is absolutely no lag from the direct raw file recorded from the ATEM Mini Pro, only when I edited the file on my FCPX I saw the stutters.

[@QippysChannel]

Steph Lee Films thanks bro for taking the time to answer me really appreciate it 👍😊

[@sgmultimediadesign]

How did you do an animated lower 3rds? I thought the ATEM could only do stills?

[@StephLeeTech]

Hi Scott! You can check out 2 of my videos here where I talk about animated lower 3rds. kzbin.info/www/bejne/aoasd5l4gNl3rLs kzbin.info/www/bejne/jaaYqI17d5usgLs

[@cncmediapro]

I subbed just for the late night show... very very funny nice tutorial

[@StephLeeTech]

hahahahah thanks! Thank you very much for watching my videos, appreciate your time!

[@StephLeeTech]

Hi everyone! Do check out our new video which I just posted! How to use the Chroma Key - A Step-By-Step Complete Guide to teach you how to use the Chroma Key on the ATEM Mini Pro effectively. Check it out here: kzbin.info/www/bejne/hWfZeaOFgKuIrZo

[@MartinVanDerSande]

Thank you for this video!

[@StephLeeTech]

Thank you Martin for watching!

[@404creators8]

Damn it!!!! That video was so good now I gotta get the Atem 💸 . It would really step up my productions. I’m sure you already covered this in a different video but I gotta ask. Can you live stream with this model and record to your USB c hard drive and can this setup be used on IG Live?

[@StephLeeTech]

Hi 404 thank you for your kind comments! Yes you can record to USB-C to an SSD hard drive and I don't think it is workable with IG Live. There may be some apps that allow you to do that I'm not too sure.

[@ordinarymatt]

really helpful, I'm setting up mine now.

[@StephLeeTech]

Thank you for watching our videos!

[@buelnanews]

Steph, can ATEM mini pro use NDI features from software streaming programs like vMax? NDI allows multi source video feeds (think; user switchable Zoom) to be fed as independent cameras into a compatible device. I need to have remote video streaming guests, but must be able to control who is on-air and have the ability to see two guests at a time with bugs and lower thirds. I want a physical switcher, not just the iMax gui. thanks

[@StephLeeTech]

Hi! I'm sorry your message went into the Spam section, not sure why! I just found it. Are you talking about VMix and OBS? Yes you can integrate the Atem Mini Pro with these NDI features for a more comprehensive and robust experience for livestream and broadcast.

[@ErwinTan80]

Hi Steph, Thanks for the video. Any experience using bonding devices for your live stream? I am looking at using the Teradek Vidiu Go, looking for advise and opinion on it.

[@StephLeeTech]

Hi Erwin thanks for checking out my channel! I have very little experience using bonding device but from what I've heard about the Teradek Vidiu Go, it is an awesome device for streaming but the Atem Mini Pro is more of a streaming + switcher. If you don't need a switcher maybe the Teradek is more suitable because of the ability to use Wifi, 4G and Ethernet to keep a stable connection, that itself is pretty awesome.

[@HeliumContent]

Very informative video. Thank you!

[@StephLeeTech]

Hi Helium Cine thank you for watching! I truly appreciate your time :)

[@JaiHoParty]

Thanks so much for the super informative video! I’m getting excessive delay (compared to U-TAP) with atem mini pro. Someone mentioned i should match my camera output to that of Atem Mini Pro so the scalers won’t be at work & that will reduce delay. Scalers apparently help convert the resolution for atem mini, as I’m sure you know... Do you know what camera output would be ideal to avoid scalers?

[@StephLeeTech]

It would be good to try 720p first

[@ibrahimrasheed6449]

I love the live experience of the atem mini pro ,I would like to know how u where able to put the logo permanently at the top left of ur screen and still use lower third .thanks

[@StephLeeTech]

Hi Ibrahim thank you for watching our video! Unfortunately for the Atem Mini Pro you only have the option of choosing one media to be layered over your video at any one time. Remember I talked about recording a copy so that your client can store the video as an archive for future viewing or put it online for their customers to view? That is where I usually add in the logo/branding for the customer.

[@ean0131]

Nice!!! Is it possible to export M/v and PGM videos to two individual monitors at same time via HDMI out port?

[@StephLeeTech]

Hi! Thanks for the comment! Unfortunately you can only select either M/V or PGM for your output

[@ean0131]

@@StephLeeTech Thanks for your reply so soon.

[@michaelharris9183]

Hi: I'm having a weird problem with the ATEM Mini Pro that even Black Magic (BMD) support could not figure out. My church is just getting started with live-streaming. I'm using the ATEM Mini Pro with a Canon XA11 and Canon Vixia HF R800 cameras. There is only one camera setting (1080P/24mbps) that will give me a clean, sharp image on both the livestream and USB-C hard drive recording. If I try any other camera setting, the output will be a blurry, somewhat choppy/wavy output on both recordings and livestream. The issue with using the 1080P/24 camera setting is that the multi-view monitor goes blank and has a message about "signal out of range". I have tried multiple HDMI monitors and they all show that same issue. It would be very hard to livestream without the multi-view monitor working. The ATEM Mini Pro video setting is also set to 1080P/24. If I try to change that to most any of it's other settings then I get the blurry livestream image or the multi-view monitor goes blank again. BMD's suggestion was that maybe I have a defective unit, which is only a few months old. What camera/ATEM Mini Pro settings are you successfully using for the "video quality"? Thanks, Mike

[@StephLeeTech]

Hi Mike after reading your message a couple of times I might have to second BMD on this. It is indeed showing abnormalities that I don't experience with my current setup. I use the GH5 (I do 24p/30p/60p) and with different resolutions ive nvr experience what u experienced. Are your cameras new? Does it happen for both cameras?

[@arhauz9719]

hi sir - if i will not go live streaming but just recording, do i need to connect the control ethernet to internet?

[@eventsunlimitedsfba]

Hi Steph thanks for your wonderful videos. Love it. I have a mini (not pro). I am having hard time using Chroma key. I am not getting much success. I am bringing lower third and title through Keynote in port4. using green as fill color. But for some reason i am not able to key them out nicely. any suggestion on how i can setup properly. I have watched your video and lots of more. still having trouble. Love your channel. subscribed.

[@StephLeeTech]

Hi EU! Thank you for dropping by and spending some time to watch our videos. Are you using the Chroma Key to replace your green screen backdrop? If you just want to put a Lower Thirds or Title I would suggest using the Downstream Key which I have discussed in detail in one of my other videos here kzbin.info/www/bejne/aoasd5l4gNl3rLs I will be releasing another video shortly this week to show how you can use BOTH the Chroma Upstream Key and the Downstream Key at the same time so keep a lookout for that!

[@StephLeeTech]

Hi EU! A new video teaching you how to bring in Lower Thirds and Logo at the same time during your livestream is out! Check it out here: kzbin.info/www/bejne/jaaYqI17d5usgLs

[@mthobisix]

I'm planning on purchasing the ATEM Mini Pro, I just need to know if I can use any DSLR with an HDMI out and is it able to receive clean audio from a mixer and sync it with video without any delay between audio and video and final question if I'm not using a Black Magic camera, can I still be able to have remote control over a camera (Canon DSLR) using the ATEM control software to adjust things like sound, focus and changing between camera A,B and C?

[@StephLeeTech]

Hi Mthobisi! 1. DSLR with HDMI - yes 2. Delay - Maybe but you can fix it with the Audio Delay button available in the latest Software 3. No - only BMPCCs can allow you to do that. Good luck and enjoy if you decide to purchase!

[@Hemmaty]

Hi Steph, the late night show had an animated intro and lower 3rd. Were these added in post or did you manage to mix these in live?

[@StephLeeTech]

Hi Matthew! The animated intro and lower 3rd was mixed in live. I am about to release a tutorial shortly teaching how to use the Downstream Key to do these intros and lower 3rds so do subscribe and look out for it! Hope you like the "Just for Fun" Late Show segment :)))

[@Hemmaty]

@@StephLeeTech Awesome, great work! Thank you for the overview.

[@astridhelgesen2652]

Thanks a lot for the most informative video I have found so far. I'm wondering about the PC specs for live streaming - apart from having Windows 10, are there any other requirements? Does it need a powerful cpu or lots of ram to work well for livestreaming? Or can a 6 year old pc with win10 work just as well?

[@StephLeeTech]

Hi Astrid thanks for the kind comments and I appreciate your time to watch my videos! Ok IMO and real life experience, I would say that MOST pcs should be able to handle the requirements of livestreaming if you take note of certain points 1. internet connection 2. upload speed 3. dont open any other apps/programs when you do a livestream, best is to restart the pc to free up the RAM before the event 4. don't stream at very high quality, a decent 720p should be good enough With the above tips (in general) I think you should be good to go. The macbook pro that I'm using right now is 2014 (oh, that's 6 yrs too!) and it's doing perfectly well. Hope the information helps!

[@TheCreativeVictor]

Thank you for creating this! I'm starting to stream and I am using streamlabs obs. They have an option for custom transitions. Essentially mov files with alpha. Would this allow custom transitions?

[@StephLeeTech]

Hi Victor thank you for watching and your kind comments. I believe OBS has more flexibility regarding transitions compared to the ATEM Mini Pro. XML editing allows you to change the Live Stream sources but I don't think it allows you to custom transitions, not yet for now, maybe in the future!

[@TheCreativeVictor]

Thanks Steph Lee! It's still a pretty cool Console and I think I'll still buy it. I have a feeling they might release an update with transitions someday! 😍 Looking forward to your future videos. 👊

[@syamsularifinmohamadyunus8144]

Great sharing

[@StephLeeTech]

Thank you Syamsul!

[@damjanscepanovic]

in the audio settings of the atem software, you can setup the delay :)

[@shawnebrown]

Yes, that is a new feature added after this video was made...

[@TallBoyGareth1]

Why is your main camera such a low frame rate?

[@StephLeeTech]

Hi Gareth I usually shoot at 60fps... That considered low? 😆

[@MrApapak]

Hello. Great video. I am waiting for my atem mini pro to arrive. I noticed that sometimes the playback its a little bit choppy. What you believe is the reason. Does it have to do with the atem or the computer. Thaks a lot.

[@StephLeeTech]

Hi Aristotelis! Thank you for watching our video. I played the RAW file from the Hard Disk that was recording the session and it seems fine to me, no choppy playback. Do you mean the KZbin video that we posted? Perhaps it is KZbin.

[@nikharrison]

@@StephLeeTech There are sections of the video that get choppy - I think just from the front on camera. I wonder if this is the camera overheating, or having trouble pushing through the data to the ATEM, or something else..

[@StephLeeTech]

@@nikharrison Hi Nik! Do you mean on our KZbin video or the one that you recorded from your own ATEM Mini Pro? I have another comment mentioning about the choppy playback. I suspect it has gotta do with the recording speed of the hard disk connected to the console. Black Magic Design said you could plug in a thumbdrive to do the recording but in my experience thumbdrives can't keep up with the fast recording and the thumbdrives get overheated pretty quickly.

[@CaseyCotton]

Thank you for including your shelties. I have two shelties, and they're the best!!!!

[@StephLeeTech]

Hahahaha thanks Casey!!! You're the first one to comment on my shelties! Yes they ARE THE BEST #hearts

[@terryjstudios]

Hello, thank you for the great videos, can you use an iPad as an HDMI display for the multiview?

[@GamersPlayerUnion]

I don’t think so because the IPAD can only output a signal through HDMI and not take one in.

[@terryjstudios]

MastenPark Thank you!

[@AVvideography]

Great video, just one question, do you know the set up for wireless for Sony A7iii?

[@StephLeeTech]

Hi! thanks for watching and appreciate your time. Sorry I have very limited experience with the Sony A7iii and will not be able to provide much information on that.

[@HeliumContent]

Steph, have you tried streaming directly from Ethernet without connecting to your computer via USB-C? It works very poorly for me, and I cannot find a solution to the problem.

[@StephLeeTech]

Hi Helium Cine no I have not. I've always connected the console via the Ethernet-to-USB adaptor to my laptop, so its Console>LAN cable>adaptor>laptop. Not sure if I understood your question but were you trying to connect to the internet using the USB-C port?

[@GamersPlayerUnion]

Just got mine in yesterday. Only problem I got is the HDMI out is not working with none of my TV’s to display preview screen. So frustrated right now

[@StephLeeTech]

Keep trying! Use a different HDMI cable or try an alternative monitor. I usually use either a field monitor or a PC monitor, I've never used a TV to beam my HDMI output though.

[@GamersPlayerUnion]

Steph Lee Films I finally tried my Vizio Tv because I saw it working on another KZbin video and he said he was using a Vizio Tv and it worked like a charm. Still going to buy the Atmos Ninja 5 at some point but at least I got it working a big screen now.

[@dinophillips1544]

I was really hoping to see your configuration to streaming

[@StephLeeTech]

Thank you for dropping by!

[@sampriest12]

So great!!!

[@RodieOsc]

How can i stream without Ethernet connection bro ? also is the video lag due to the computer or the atem mini ?

[@StephLeeTech]

Hi Osckiie If you don't want to connect by ethernet you can use the USB-C to USB connection. The video lag is due to the computer I suspect

[@sajisivasankarannair3268]

hi. thanks for this video. can You pls tell me how that internet working through the laptop's internet? are you using a switcher? thanks

[@StephLeeTech]

Hi Saji I share the wireless connection from the laptop to the AMP

[@sajisivasankarannair3268]

@@StephLeeTech thanks for the reply. You mean wifi to the laptop, then network cable to the atem, is it means atem can use the internet frm the laptop or is it just a communication between laptop and atem for the control software?

[@StephLeeTech]

@@sajisivasankarannair3268 Hi Saji yes that is right. Wifi to Laptop, then Laptop sharing internet to AMP.

[@adrian4jc]

Thanks steph, you help me a lot. Sorry for being a pain. I have got couple of Questions. I have a 2012 Macbook pro, no HDMI ,only mini displayport or Thunderbolt 2 and an old firewire 800. Should I need to buy an adapter(e.g. DP to HDMI or Firewire to HDMI)? what sort of cables I need apart from HDMI? This MAC also has a built in ethernet port, ATEM has ethernet port, can I hard wire both on ethernet router so that they can talk to each other. Do you experience an audio delay? As some says the 2 audio ports on ATEM has it. My ATEM mini pro will be delivered tomorrow. Can you import a video or animated overlay in ATEM? Kind regards.

[@StephLeeTech]

Hi Captain Jose! :) Thanks for dropping by my channel and watching my videos. I'm super happy to help out with any questions you have so PLEASE don't find it a chore to ask. 1. The older macbooks still have the ethernet ports, I think they phased it out in 2014? or somewhere around that time, that is why I had to use the adaptor. You can try attaching a LAN cable directly from your Macbook to the Atem Mini Pro Ethernet Port, I think it will work. You don't need a router because the magic of the Atem Mini Pro allows you to use the internet connection from your Macbook (which is connected by Wifi) and sharing the internet with it. (read: support.apple.com/en-sg/guide/mac-help/mchlp1540/mac_) The only reason why it may not work could be that Apple has phased out certain updates to older Macbook models but I think it's worth a try... hey! You can even save on purchasing the adaptor! [I bought it for about $50 :( ] 2. I have not really used the Mic Ports on the console for my recordings as I usually use the AFV (Audio Follows Video) option but I have heard about the audio delays. Let me know if you experience it. 3. I'm working on the Lower 3rds Downstream Key for animated overlays and it should be out sometime this week. Do keep a lookout for that video coming up soon! Thanks for your time again in speaking with me, I really appreciate the time and your questions to me. I hope you enjoy your new toy and if you have any questions, please ask!

[@adrian4jc]

@@StephLeeTech thanks for your reply. I am really excited. I have to experiment on what things this toy can do. But I will give you a shout as soon as I can. Best regards.

[@StephLeeTech]

Aye Aye Captain! Have fun with your new toy! :)

[@adrian4jc]

@@StephLeeTech Got it, I need to watch your videos again to guide me. Many thanks.

[@carterchan5295]

Hi, Thank for such a greatful video. wondering can you do a video for the lienar key and keyer fuction ?

[@StephLeeTech]

Hi Carter! I'm working on it right now! Video will be up shortly!

[@StephLeeTech]

There you go Carter! kzbin.info/www/bejne/hWfZeaOFgKuIrZo

[@carterchan5295]

@@StephLeeTech Thanks for that Bro.

[@JuusoHoo]

marvellous humour you have :D thanks! I learned from you that the IMPro has to have the internet via Ethernet port, that is the only way to go to the net.... or is it? So the usb-port is not for my laptop to route the AMPro cameras out to the net? May be I have to read the user guide once more.... :D AH THE STREAMING GOES EITHER USB OR ETHERNET! FROM THE USER GUIDE"..TIP When recording to disk using ATEM Mini Pro, the USB connector will be busy recording to a disk so it won’t be free to use as a webcam output. However the ATEM Mini Pro model also has live streaming direct via its Ethernet connection. If you want to use the USB connection to record to a disk you can use the Ethernet connection for streaming. You can even use the Ethernet for external control using ATEM Software Control. Please refer to the ‘additional features on ATEM Mini Pro’ section for more information...." BUT! I still do not get my Nikon 3300 via HDMI cable to work with this Atem... no video, no audio...incredible...

[@StephLeeTech]

Hi Juuso! Thanks for dropping by my channel! I'm glad I gave you some good entertainment :) Yes both the USB-C port and ethernet cable can connect your console to the NET but I always use the USB-C for recording hence I recommend using the ethernet port. Thanks for sharing! I'm sorry I have very little experience with Nikon cameras, have you tried using the Nikon DSLR to connect to your laptop or to another monitor via HDMI and does it work?

[@JuusoHoo]

@@StephLeeTech thanks. it finally acted and connected but without audio from a muc that needs the 1,5 volts. I go on learning anf boughy more cables too!

[@StephLeeTech]

@@JuusoHoo I'm glad it is working! Let me know if there is another other thing I can help with.

[@kriskris6606]

great infos here, thanks for this!!

[@StephLeeTech]

Hi Kris thanks for watching!

[@ClimateRealism]

If I take a feed from say an iPad bringing in a remote guest on Skype or similar on channel 2 and I want to have both my voice on channel 1 as well as the person's Skype audio on channel 2 - how can I have both audio feeds at once? I would need both vpoicveds to conduct an interview.

[@StephLeeTech]

Hi Paul in my opinion this is not a very ideal situation. My question to you is How would you want your output video to look like if you want to do it an interview style? Will you be carrying the iPad and talking to it while the main camera (Cam 1) is facing you? But to answer your question regarding having 2 voice channels I would use the MIC1 port (your own sound) and MIC2 port (from the iPad).

[@ClimateRealism]

@@StephLeeTech I would want to show myself and the person i was interviewing on the screen at once. Your suggestion would split the sound and video from the iPad and maybe cause sync problems? There seems to be no way of mixing the sound of the two channels.

[@ClimateRealism]

@@StephLeeTech so when you do a split screen with two screens do you get both channels sound coming from say input 1 and 2?

[@StephLeeTech]

@@ClimateRealism Hi Paul as far as I know the Atem Mini Pro is not able to do split screens and if you plan to split the audio and video yes there may be sync problems.

[@ClimateRealism]

@@StephLeeTech But it can do picture in picture and in that event does the sound come from both?

[@Digital.Done.Right.]

Love your Late Show. Got me laughing

[@StephLeeTech]

Hi Andrew I'm glad it tickled your funnybone. Do subscribe for more videos!

[@coolcreatures]

How do you key in the opening video at 8:24? Thanks Steph

[@StephLeeTech]

Hi Wayne! Thanks for watching our videos. The opening video was from HDMI 4 (connected to the laptop) before I punched in the Still to reveal the company logo. Hope that helps!

[@coolcreatures]

@@StephLeeTech thanks bro. Now I have problems with ATEM MINI PRO detecting my macbook hdmi input. In running macOS catalina 10.15.5 . Anyone has this issue? I tried other windows laptop it works perfectly fine.

[@StephLeeTech]

@@coolcreatures Hi Wayne I have heard many issues with Catalina so I am still staying on Mojave and have not upgraded yet. It could be the new macOS.

[@beatprocess]

great video

[@StephLeeTech]

Thank you for watching!

[@Vidyograf]

Do u know if the pro has a built in audio output? Thanks!

[@StephLeeTech]

Hi Vidyograf no it does not have any audio output. Only Input. Thanks for watching!

[@lesaventuresdecocoremy9298]

Hello what is your camera please ? I look like camera who work with Atem mini

[@StephLeeTech]

Hi Coco & Remy the camera I use is the Panasonic GH5 I talk about this in my other video kzbin.info/www/bejne/aHSrlmlvbM5_rdU

[@herbert.w]

in this video, when steph switches to the main camera, there's some lag/drop of frame... am i the only one seeing this? (eg. 1:52, 7:22...) but thanks for the demo! it's great!

[@StephLeeTech]

Hi Herbert thanks for watching our video and thank you for your feedback! Similar to other comments, there seems to have some lag/stutter/shuddering etc during certain time frames of the video. However I have looked back at the RAW file recorded from the console, there is no lag/frame drop etc, everything is very clean. It could be during editing and rendering of this final video that caused the stuttering. Hope that clears up any doubts!

[@computerjantje]

WAIT WAIT !!! everybody is so enthousiastic about the atem mini pro but as of tonight I have serious doubts about the maximum streaming quality output of the atem. In highest quality setting, I have seen the image is still way fuzzier then the same images recorded and then uploaded to youtube. What is going on here? Did you test or compare thiss. Your images look razor shaprt but you did not live stream this video right? You recorded it end then uploaded it to youtube.

[@StephLeeTech]

Hi, this was taken off the USB-C port recording. Livestreams are hardly this razor sharp, unless you are streaming at 4K. And that is provided your upload speeds can handle 4K streams :)

[@adrian4jc]

Hi Steph, can you use the ipad as Multiview monitor in ATEM MINI Pro?

[@StephLeeTech]

Hi Jose no you can't.

[@StephLeeTech]

There are some apps that allow you to use the iPad as a secondary monitor (to your computer) but not as a HDMI Out monitor.

[@adrian4jc]

@@StephLeeTech Hi Steph. Got another problem. I have a 2012 MacBook Pro with mini display port and FireWire 800. Manage to get mini display port to HDMI adaptor, this will go the ATem mini pro. The problem is I don't have the option now to extend the display of MacBook Pro as I will need to use keynote for our church. There is an apple official app to extend your display to iPad called SIDECAR, but that is only for MacBook 2016 onwards. Downloaded the aplashtop xdisplay but that is is laggy. My option is covert the FireWire 800 to HDMI. Wish I can buy a Mac that has multiple video ports. Any idea?

[@StephLeeTech]

@@adrian4jc Hi Jose have you tried the app Duet Display? I use it to extend my Mac display it might work for you. SIDECAR is only for MacOS Catalina if I'm not wrong.

[@adrian4jc]

@@StephLeeTech I switch to windows laptop as there are more ports. Got some audio problems with my mixer connected to ATEM. A lot of noise and hiss. I will post a video regarding that and I will let you know. Kind regards.

[@charsiewpao4152]

What cameras are you using for your livestreams? Do I need to buy specialised cameras for them or can I just use my mirrorless cameras that I currently already have? Thanks a bunch for this video. Hopefully more to come. Subscribed!

[@StephLeeTech]

Hi Zach thank you for watching our video and subscribing! Currently we use the Panasonic GH5 for our livestreaming and film-making. You don't have to buy specalised cameras as cameras nowadays should have the basic functionalities to do livestreaming. Just a couple of tips based on our experience: 1. Make sure you have an option to set clean HDMI output. That means that you have an option to disable the display icons (e.g shutter speed, ISO, battery remaining etc) from being displayed on your output. 2. Camera does not switch off/stop recording after 30mins of recording (some cameras have a limit). 3. We used the Canon 5D Mark 4 for our Camera 2 in the video and the 5D Mark 4 has a mini HDMI in, meaning you need a Mini HDMI to HDMI cable. The one provided by the Canon isn't long enough so we had to use an extension. The GH5 has a full sized HDMI input so we could use our existing very long (up to 50m) cable, as well as our wireless HDMI setup.

[@charsiewpao4152]

@@StephLeeTech Thanks for your reply! I think my Sony A7iii can do clean HDMI output and it can run continuously without stopping. My last question would be on the audio sync issue as you have mentioned. I ordered the ATEM mini pro and it's arriving tmrw. I'm quite concerned about the audio sync issue especially when it comes to livestreaming an interview with a few microphone inputs. Do you have an audio mixer in mind that could help delay the audio to match the video source? I know OBS has the feature to delay audio, but I would prefer to use the Blackmagic livestream interface as much as possible. Thanks for answering my questions, you are very helpful!

[@StephLeeTech]

@@charsiewpao4152 Hi Zach I would suggest you use the audio feed directly from the camera which is recording the video to be sure of the video/audio sync if you are doing a livestream via the AFV button. Yes OBS and Vmix has a Delay function to delay audio but for livestream usually we take in audio directly from that particular camera itself, it is better to be on the safe side esp. for live events. And yes I think the Sony A7iii is great for livestreaming!

[@StephLeeTech]

Hi Zach just dropping you a quick message here! I have just released a video today talking about Why I use the Panasonic GH5 for broadcast and livestreaming here: kzbin.info/www/bejne/aHSrlmlvbM5_rdU Do check it out!

[@charsiewpao4152]

@@StephLeeTech that's awesome. Thanks for the video. I'll check it out!

[@JDAfrica]

There seems to be some shuddering in the movement of the video. Is this because of the frame rate you filmed at (ie: 60p)? Or has it got something to do with the hardware conversion. At 9:13 part, when you moved your arm, movement looks shuddered

[@StephLeeTech]

Hi JD thanks for watching our videos! The 9:13 seems pretty normal to me but on the contrary when I rewatched the video, the first 10s seems to have some stuttering if I looked closely, the part where I introduced myself "Hi everyone ..." I dug up the raw file which was recorded by the ATEM Mini Pro and I watched the whole clip again: it was perfectly smooth. I guessed it is very likely during editing on the FCPX something came up. But again, to answer your questions I can safely and confidently say the raw recorded file from the ATEM Mini Pro was perfectly fine. I'll probably do another test again sometime soon to confirm that! Thanks again for taking time to write back.

[@StephLeeTech]

Hi everyone I have just released the latest video, a super easy step by step tutorial on How to create Animated Lower Thirds and Logos using the Downstream Key on the ATEM Mini Pro! Check it out here: kzbin.info/www/bejne/aoasd5l4gNl3rLs

[@arhauz9719]

hi sir steph, i need help,. my set-up was connecting my macbook directly to atem mini via hub port with RJ45. at first the connection was ok. for some reason, it stopped working. any advice here sir?

[@StephLeeTech]

Hi ar hauz. Did you use the same port as previously?

[@arhauz9719]

@@StephLeeTech yes sir. is it possible issue on a mac os big sur ?

[@StephLeeTech]

@@arhauz9719 Yes it could be

[@arhauz9719]

@@StephLeeTech hi sir - just want to update. i bought another ethernet external port (ugreen brand). now its working. could just be a faulty multi-port hub.

[@StephLeeTech]

@@arhauz9719 That is good news Ar Hauz! Hope everything works fine for you now :)

[@jdticohmomentcapture7639]

2thumbsUp, can you give me a recomended camera for live streaming with this atem mini pro

[@StephLeeTech]

Hi Janne! Thanks for watching our videos, appreciate your time :) do you have a budget for this camera? If budget is not a factor i would recommend the panasonic GH5, which is the one I am using right now :)

[@StephLeeTech]

Hi Janne! I have just released a video today talking about Why I use the Panasonic GH5 for broadcast and livestreaming here: kzbin.info/www/bejne/aHSrlmlvbM5_rdU Do check it out!

[@thesearethebreaks]

great info!

[@퇴근후2시간-k2r]

thx for great infos!!

[@vizualizefilmsllc6225]

thank you!

[@StephLeeTech]

Thank you Vizualize Films!

[@bobbystefano]

IF THE USB OUT IS RECORDING, WILL YOUR COMPUTER RECOGNIZE YOUR AETM AS THE WEBCAM VI ETHERNET??

[@StephLeeTech]

Hi Bobby unfortunately there is only one USB-C port and you can either use it for recording or plug in your webcam

[@bobbystefano]

@@StephLeeTech Thanks Steph. Seems like a huge flaw

[@StephLeeTech]

@@bobbystefano Hi Bobby on the contrary I thought otherwise because the previous model the ATEM Mini could only do the webcam function using the USB, now that made that USB port a recorder, so from 1 function it became 2! Maybe in future models they may consider opening up another slot for 2 x USB ports. Fingers crossed! Thanks for watching and commenting :)

[@tedz2000]

How u animate the lower third

[@StephLeeTech]

Check out the video here Tedz kzbin.info/www/bejne/aoasd5l4gNl3rLs

[@tedz2000]

No animation in this video

[@StephLeeTech]

@@tedz2000 if you mean a cartoon animation kind of animation that's not possible with a png image. The animation I'm talking about is making the png image fade in as an animation. Hope I'm clear on that!

[@tedz2000]

Yes sir your lower third animates it creates a rectangle then text then fades

[@MrMahefx]

Hello, Such a nice video. 1. What will be the video quality when recording through C-port.. Frame Size - Frame Rate - (Streaming High & Hyperdeck High) Codec - Approx size of Recorded Files per hour - 2. C- port always have program output only ? 3. Can we use the microphone output as a line input from audio console? (Incase of no embedded audio from camera) 4. what will happen if incase suddenly power goes off during the work time. Can we get the video files recorded in the Hard drive?? (All files or Last saved file or till the few previous seconds of power cut). 5. When Streaming, incase of slow network speed what will happen to the live either jump cuts or adjusted with video quality?? and also will it affect the recording in the C-port?? Thanks.

[@StephLeeTech]

Hi Mahendran! Great to see you on our channel! Appreciate your time. 1. The video recording is in 1080p, 60fps, in a flat profile. For my recording of about 20mins, the file size was about 2.5GB 2. Yes the USB-C recording port only records the Program output 3. This is a microphone input, not output. So if you have a external audio console you can connect to this Microphone port. 4. All files will be saved until the point of power off 5. Livestreaming most important is upload speed, so from your end you need to make sure you have fast upload speed from your Internet provider to prevent laggy video. Video quality is adjusted from the console, so if your internet speed is slow, try to choose a lower resolution for live streaming. This may result in a lower video quality but at least there will be no lag/jump cuts from your viewers No it will not affect recording in the USB-C port, it will still be recorded in the H.264 compression at 1080p 60fps I hope I have answered your questions, if you have any more I'll be happy to help.

[@MrMahefx]

@@StephLeeTech wow.. Thanks a lot...

[@StephLeeTech]

@@MrMahefx Hi Mahendran! Just a quick follow up on your Qn 1. In case I did not explain myself clearly, all ATEM Mini models automatically set the program output to match the format and frame rate of the number 1 video input signal it detects. All you need to do is connect your camera to input 1 and the ATEM Mini will follow its video standard. Any other inputs will then be converted to the ATEM Mini’s video standard, which is automatically set to the video standard of the camera plugged into input 1. Of course you can always select a specific video standard manually in the ATEM Mini settings if you choose. Therefore my answer was 1080p 60fps because that was my Camera 1 settings. Hope I cleared that up!

[@MrMahefx]

@@StephLeeTech You nailed it.

[@ChristianPirate]

👍

[@StephLeeTech]

Thank you Lucas for the support!

[@Sxrojas]

At 4:01 when the text comes on the screen there is a heavy lag and drop in frames

[@StephLeeTech]

Hi Rojas yes I have mentioned that a couple of times in the video as well

[@JDAfrica]

If we could Write our own macros and assign to unused buttons - that would be amazing!! Come on BlackMagic, make it happen! Then I could save a variety of PIP and split screen presets, to my custom look and use at a press of a key.

[@StephLeeTech]

You know what, if you compare the Atem Mini and Mini Pro the console is EXACTLY the same, just with missing buttons (which was later on added on the Mini Pro). Well from what I see, there are still empty spaces on the Mini Pro console (above the big buttons 3 and 4. My suspicion is they will introduce another version in the future (maybe the Pro 2?) and add something there. Just a hunch, we'll see!

[@fistonwabu2913]

Hey Steph I want to know about sound here is my question, for example I am using 4 cameras and I just want to use sound from camera1 to all 4 cameras when I am switching angles how should I set it up ? I will appreciate to see your answer so far you're doing a great job.

[@StephLeeTech]

@@fistonwabu2913 Hi Fiston thank you for your kind comments and feedback and time for watching my videos. If you are using 4 cameras and want to use sound ONLY from Camera 1, push the AFV button above Input 1 (on the console). I talked more about this somewhere from the 2:00 onwards you can take a look from there

[@StephLeeTech]

Hi everyone! I have just released a new video on How to Add a Custom Streaming Platform to your Atem Mini Pro - A Complete Guide so that you can edit the XML file and add on more streaming platforms to the existing default 3 of Facebook, Twitch and KZbin. Check it out here! kzbin.info/www/bejne/hYDFZZSoZZ6ZbNU

[@proteusbcn]

Interesting but not for me. I was using this unit last week and... is so bad! Only 1 HDMI out? Only 1 USB? Minijack? and XLR? only HDMI? and SDI? and why is so complicate to use an RTMP? You have to edit a xml file to add a RTMP. Is nice but not for me :P (by the way, I love your videos).

[@StephLeeTech]

Thank you Daniel for watching and your kind comments! Yes the ATEM mini Pro may not be perfect but it fulfils many needs of many livestreamers. I'm sure BMD is working on the existing problems. Hang in there!

[@sae-institute]

Blackmagic update available today that "Adds adjustable audio delay on the analog inputs on ATEM Mini models."

[@StephLeeTech]

Hi Nick! Awesome news, I've heard about it earlier in a day and actually in the mist of recording a quick video to post on the channel. Thanks a million!!!! Always great to share info, appreciate your time very much!

[@StephLeeTech]

Hi everyone! I have just released a video today talking about the Top 5 Reason Why I use the Panasonic GH5 for broadcast and livestreaming here: kzbin.info/www/bejne/aHSrlmlvbM5_rdU Do check it out! Thanks!