This is the best video i found on camber. Thanks bro i like how you showed front and rear
@sikzTnyn6 жыл бұрын
everyone so scared to show theyre camber setups thx for vid!!
@spliteditz6053 жыл бұрын
Why did you use “they’re”? Do you not know the contraction?
@JoseHernandez-xg5mt4 жыл бұрын
Thank you for all them camera angles 👁👄👁 Helps a lot! 😤🤙🏽
@Notfast868 ай бұрын
Thankyou for this video bro it really explained and put it more direct and easy to understand.
@chris_borges8 ай бұрын
Glad it helped!
@karlsolitario80136 жыл бұрын
thank you so much dude! I bought pbm as well but couldn’t find any video on youtube how to adjust them properly. More freedom for me now that I know how to adjust them 👌thanks again really appreciate it bro
@chris_borges6 жыл бұрын
solitario_dc2 yessss so glad it helped you out bro ! i was in the same boat not too long ago i didn’t understand how pbm lcas work... but once i found out i wanted to help anyone else that had the same problem .
@brianchavez13393 жыл бұрын
Great video, perfect angles and described what to do! Thanks bro
@5.0noah125 жыл бұрын
and the left handed threads are for the vibration so that the nuts actually spin and makes them selves tighter instead of becoming loose
@andrewhowell65842 жыл бұрын
Your vids are a godsend!
@cooperwellard44025 жыл бұрын
What camber plate did you purchase and where did you get it from?
@Br3ttBork3r4 жыл бұрын
Is there a reason you switch from PBM toe arms to Megan racing? Do you notice a difference?
@anthonycontreras16256 жыл бұрын
Finally a great tutorial thanks again for the video dude much love 🤘🏽
@chris_borges6 жыл бұрын
thank you thank you! glad you enjoy.
@LosingMyMind134 жыл бұрын
So I recently got the camber plates as well, maxed them out right off the box, but noticed that when at full lock, my stabilizer links would rub up against the wall, did you come across this problem as well?
@chris_borges4 жыл бұрын
Yes I tried hammering it for more clearance but eventually just removed those sway bar links and ran it without.
@wrxcbr6rr5 жыл бұрын
The heim joint was not installed properly. I’m guessing it was done that way to be able to access jam nuts and adjuster. Proper way is to screw adjuster all the in, heim all the way in, hold heim(so it can’t turn), then make your adjustment. This allows full range of adjustment (arm can be made as long or short as possible). Subframe may have to be cut some to access jam nuts. I do alignments on plenty of low cars and drift cars. Very common mistake when people install heims and adjusters incorrectly. Important to do properly prior to install. Saves time and money. 👍🏽
@TwigmasterGaming5 жыл бұрын
Dude, thank you so much for this vid! Such great info, keep up the great work!
@chris_borges5 жыл бұрын
No problem bro! Just trying to help out as much people as I can. Hope it helps!
@NotVinnyy6 жыл бұрын
Been looking for this as well! Thank you.
@KeepingUpWLeland4 жыл бұрын
Man, you’re everywhere 😂
@NotVinnyy4 жыл бұрын
@@KeepingUpWLeland You know me
@jino40444 жыл бұрын
Nicely done! One question though, when you take it to the alignment shop do you tell them not to touch the camber? Even though you put -7 degrees its probably not exact and probably has different values on each sides.. do you try to match them up so you have exactly the same camber, or you just leave it
@chris_borges4 жыл бұрын
I make a guess on how it looks at home then I tell the alignment shop to put it at the exact degree when I get it aligned!
@jonathanflores52515 жыл бұрын
Great video dude keep it up
@ALMR545 жыл бұрын
So after you set your camber to your own preference, then you take it to get aligned? Does that go hand-in-hand with the toe-arms?
@chris_borges5 жыл бұрын
Angel Moreno yes
@dhillonmaharaj48634 жыл бұрын
For the rears is it just the Pbm control arms and toe arms?
@chris_borges4 жыл бұрын
yes.
@rudyf23876 жыл бұрын
how do those pbm's feel? im thinking about getting those on my frs as well to even out the 1inch gap on the rear even though my coils are maxed, will these bad boys do the trick?
@chris_borges6 жыл бұрын
they're awesome. these can drop your car super low. believe it or not with my track stance setup, I had to raise my coilers to almost the max height they can go because the arms lower the car so much. they will definitely fix your problem. great investment for going low!
@rudyf23876 жыл бұрын
Chris Borges that’s insane! Thanks man, love your videos!
@chris_borges6 жыл бұрын
appreciate you so much thank you!
@miamimotogroup53714 жыл бұрын
Hey when you installed the Bc were you able to adjust front oem tie rods for bump steer? I have really bad bump steer with Bc extreme low maxed negative camber and I wondering if the oem tie rod can be adjusted
@chris_borges4 жыл бұрын
Team No Sponsors I believe the oem tie rods can be adjusted. As far as the rubbing with the end links on the frame from negative camber, I just removed the whole end link itself to avoid that LOL and ran none.
@miamimotogroup53714 жыл бұрын
Chris Borges yo do you get any bumper steer when slamming the car? I get a lot, have you heard of bump steer? Because I have the extreme low coils and I can’t find any help on this
@chris_borges4 жыл бұрын
Team No Sponsors I may have misinterpreted your first comment when I replied. What is bump steer? I haven’t heard of it.
@miamimotogroup53714 жыл бұрын
Chris Borges Bump Steer is when your wheels steer themselves without input from the steering wheel. The undesirable steering is caused by bumps in the road. It happens when cars are lowered. I’m asking cause I’m having this issue. Do you have any custom front arms other then the end-links that came with coils?
@chris_borges4 жыл бұрын
Team No Sponsors Ahh i see yeah bump steer sometimes happens with me. I don’t have any custom arms.
@k1ndalow2 жыл бұрын
Know its a old video but just installed these on 2020 wrx and the hole where the bottom of the coil mounts to the lca the bolt isnt long enough or did I do something wrong. The bottom mount for the coil is in the top hole not the, The bottom was to much of a drop. The nut will go on the bolt but not enough of the bolt to thread the nut all the way on, Didnt know if the bolts threads needed to be facing the front of the car if that changes anything or the back. (Have them facing the front right now.) Just trying to gather info before its on the ground and the coil comes loose because something wasnt tightend. Thanks in advance if you get around to responding to this, or if you don't have a clue that's cool too just gathering info.
@chris_borges2 жыл бұрын
Try switching that bolt with the bolt that is used closest to the outside of the car for the axle area. I believe that one is longer.
@k1ndalow2 жыл бұрын
@@chris_borges Thanks man appreciate it.
@5.0noah125 жыл бұрын
if i just have lowering springs, can i add negative camber to my wheels if everything else is stock. As i see in this video i see that ill need camber plates, but is there anything else i need to add camber?
@Musicizmyremedy24 күн бұрын
Depends on how much camber. Camber bolts and possibly adjustable control arms
@thedemonlord86855 жыл бұрын
So im trying to adjust my camber positively im trying to get the rear wheels closer to being straight up and down. I don't need a toe arm for that right?
@chris_borges5 жыл бұрын
you don't need to, you should be fine with the stock toe arms.
@dhillonmaharaj48634 жыл бұрын
Is it the same concept for most control arms because I have the blox ones?
@Hold.My.Tacoss4 жыл бұрын
If they look the same yes
@karlosmoreno38214 жыл бұрын
I want to take camber out, like get back to 0 camber how would I do that?
@TheRealBrendon6 жыл бұрын
Awesome
@vincentque21886 жыл бұрын
what do i need for the front to have negative camber? only camber plates and bolts? how about the alignment?
@chris_borges6 жыл бұрын
Vincent Que yes it’s in the video plates and bolts. and you will need to take your car to an alignment shop after to get it properly aligned.
@jefferydishaw1764 жыл бұрын
Best part at 06:30. They talking about Fortnite 👌🏼 haha just noticed this. Thanks for this tutorial Chris!
@alexjohnson14395 жыл бұрын
This is such a great video! Keep it up 🤘🏼
@petersosa89253 жыл бұрын
Does anyone now if Megan racing lowered control arm gives me positive camber on the rear?
@tylerjohnson51395 жыл бұрын
Aye I literally got my rear camber kits the other day this video was a freaking great reference!!!! Drop them grams boys/girls @Tyllerjohnsonn