How to Ceramic Paint Your Headers

[@milanmastracci]

I love how almost every comment regarding this video has NOTHING to do with the ceramic coating, but how the car sounds... SICKKKK

[@tonytober]

Internet's mean 'n unpredictable. 24/7/365 ☻

[@JuiceboxOffroad]

milanmastracci Stfu it sounds like a sick dog taking a shit

[@DarrenBoxhall]

That's because it sounds disgusting

[@thekingsilverado9004]

You numb nutzies shoulda also covered or put bolts in those sensor holes. My good pal Eddie made that mistake with the paint and had to replace an entire piece of pipe after a sensor went bad even the heat from a torch wouldn't free the sensor up... So just some advice to the good. There isn't much to comment on the paint always looks nice on something new. What is to comment on is the durability and we've found out from 40 years on the short tracks the VHT holds up better than most products but it still burns off over a few weeks months and washes. Another thing to look at is the sensor position itself sometimes when you have all the components out like that on a work bench it's a good idea to look at the position of the sensors and move the location as minimal as possible so you can get a wrench or the special socket on the sensor. This can only be done when the parts are out on the work table as such. We've saved ourselves tons of grief ever since Eddies fuck up with that sensor one of the problems you will encounter with a sensor is that sometimes just the position you are working in with the wrench can ad a counter force against getting the sensors out or getting a torch on it without setting your car or fuel lines ablaze . We've had it happen where the counter force is what prevented us from removing the O-2 sensor and like magic when the position is changed it's much easier service work later on in the vehicles life. Around here we get fairly decent good quality gasoline but I can't say that at my other home in Texas the gas is often tainted and not the octane it should it be. It seems the suppliers like to ship alot of their screwed up and misblended blends to warm weather places because it burns regardless but it also kills O-2 sensors like ya can't believe... Nice video though....

[@sidecarbod1441]

Nobody is bothering to comment on the coating because VHT paints are all crap, they always flake off after a few months no matter how well you prepare the metal.

[@MrJunior82006]

The sound of that exhaust reminds me why I love the sound of good old American muscle cars and the V-8....

[@TheScrotus]

I got a 496 and go through the same thing as these guys. The stamping on the bolt isnt right. People are just azzholes.

[@braedengraham2268]

No joke

[@anyideasa.i.8090]

Amen

[@sagedoiron558]

So tape mating surfaces, but not threads for 02 sensors? 🤔

[@davekraus9714]

Not the O2 sensors! You will ruin them at about $75 a pop, which doesn't make any difference as without the cats, they're ruined anyway. Forget about any A/F calibrations. That's over now.

[@dntreportmebrah134]

The o2 insert has a plug in it

[@canyonraney7641]

Don't really need to. No cats. Basically they exist now to prevent codes. Some times you can just test the average Ohms and hardwire a resister. They can plug it too. Even then if they didn't do a cat delete it the threads are usually a 3B loose tolerance fit for assembly. So paint and grit barely effect it at the very least it will make psuedo locktite lmfao

[@alexhernandez3894]

Is it bad if I paint the mating area ?

[@Space.Ghost.]

@@alexhernandez3894 yes. You need to strip it off and do it again dont scrape it strip it with paint stripper.

[@AmpasaurusWrecks]

Ok, so a year and a half later, what do they look like?

[@markboza6215]

this stuff is actually the cats ass for durability,they did a salt spay test on this stuff and it blew away cerakote on the same materials they tested thats impresive, i know the clear that you do a 3 step oven bake with is great for protecting the paint from chips oxidize AS WELL.

[@jayhensley4049]

Well they would have left a lot better my friend if he didn't paint the stainless steel that does not rest. Uninformed and Young I'm sure he'll live and learn

[@TheMrFlyBoy18]

@@markboza6215 source of the test?

[@1dash133]

The proof is in the details. How long did you bake it in the cardboard box? At what temperature? How did you monitor the temperature?

[@surg23]

Sounds like a popcorn machine hooked up to a 5000 watt megaphone.

[@iLiveToDoWhatiLove]

Nice video! Love how descriptive u r 🤙 thanks

[@konstantinos1992ful]

how mutch hp gained from the r32 badge ?

[@furhadnasserjah123]

i am fan of ankle enough to make you wine

[@frazierj757]

I'm sorry but this had me lmfao

[@FasterThanJesus666]

30hp easy

[@ytubesucksazznow]

don't you mean 32? lol

[@aaronguenther3577]

32

[@shepetadonovan1868]

Why wouldn’t you just hang the exhausts on wire from ceiling when painting? 🤷🏽‍♂️

[@coltonm8623]

Probably more difficult to control overspray.

[@donrutter6765]

VHT will peel off, use Rustoleum high heat, it is rated for less heat, but wont flake off. Or you can use POR-15 with a brush, then when it is applied and still wet, brush some paint thinner over it to get rid of the brush strokes. They make flat black, gloss black, and silver.

[@edgardovigo147]

Rustoleum alone? No primer ?

[@TheMrFlyBoy18]

@@edgardovigo147 Definitely needs a primer too

[@aaronkashmer5882]

@@TheMrFlyBoy18 no. just sandblast or wire wheel and HT ROLEUM is the best. I like in MI and use it. Also tested by other on YT.

[@zackapackin]

Yes sir you aren’t lying! I noticed I had to just end up going thru a “burn off stage” and let it all melt off when I used this vht on my headers. I was 18 or so and wasn’t sure if this was supposed to happen or not. Thought man.. I think I kinda just wasted a whole 2 months of savings on this stuff but didn’t wanna believe it. The long tubes are now rusted to sh*t 10 years later 😅 They still have alot of wall to rust thru but not sure they will be good for cutting/repurposing for turbo setup. don’t want flakes to blow thru

[@iLiveToDoWhatiLove]

I smiled so damn big when I heard that downshifting 🤣👏💯🙌

[@bryanviper]

Hopefully you guys will put a muffler or something on it. Its just a little to loud... you are in fart can Civic land now, dont do that to the poor VW lol

[@gjolinares23]

bryanviper that car is know to be a rice wagon.... 😒

[@TheMrFlyBoy18]

How is the paint holding up all these years? How long did you cure the paint for?

[@vzgsxr]

That exhaust sounds terrible, it sounds like a wet sloppy fart 😂

[@chemicalspore]

After enchilada night

[@Spacebirdy]

11:49 Look at the ground near the exhaust. It is a wet sloppy fart!

[@moto6ixmoto83]

That’s what happens when you put a rice can and no cats on a in-line 4.

[@SlowSTEN]

I had to watch the whole video to understand,I now agree.

[@micjubba709]

Needs a decent back box on

[@robstaylor4234]

How did it turn out? Did it flake out

[@BradyBell33]

Kinda sounds like my lawn mower I straight piped.

[@gabecuevas6655]

What an awesome video. Thanks for this!

[@nathanplatt5517]

stainless does not rust, it will loose its shine but it will not rust, thats why its called stainless. im a welder and weld stainless all the time

[@VintageTechRepairs]

Nathan Platt it does rust but it takes years if the quality of the metal is high

[@povertygarage3094]

Nathan Platt I heat cycled my hks headers on my old na sr30 s13 and they rusted. They rusted differently to mild steel but still.

[@Scourge1024]

The question is what kind of stainless? T304 won't rust. T409 will show surface rust.

[@athhud]

I'd be embarrassed to be in that field and publicly state that anything called stainless steel doesn't rust...

[@Mike-dx8jj]

I HAVE A POLARIS FLYING BOAT AND THE CAGE IS STAINLESS STEEL. 12 YEARS AND NOT ONE SPOT OF RUST ON IT

[@justvisitingterra6459]

THESE GUY'S DON'T HAVE A CLUE. MAXXAUS.

[@macaliluv09]

Sounds like trash, good job 👍🏼

[@Nickoo2010]

Lmao

[@sinformant]

Marcos C. Agreed. I just can not understand why people think exhausted like that sounds good. All the 4cyl cars I've owned I've put high flowing loud exhausted on, but had the exhaust built at a muffler shop and picked muffler to avoid that shitty fart can sound. The best muffler I've found to achieve this is an aero turbine. Had a buddy put one on his civic and it was super deep with 0 rasp.

[@Hoggdoc1946]

I agree a nice flow master would mellow and deepen the note and sound better I think...

[@sinformant]

Mike Brink thanks for the info! I have a few buckets of cat innards that I saved with intentions of figuring out how to refine out the platinum. Now I'll look for a place to cash it in😀

[@dm7097]

I bet your neighbors love you SMH

[@josephshoo52]

How long did the paint last?

[@JlevGaming]

let me know how many ppl burn their house down putting a heat gun inside of a cardboard box like that

[@richardsharma283]

average gamer not me, watched it for 35 mins straight, it did leave burn marks on the hole that I made to put the heat gun into though. Just gotta be careful

[@garyjohnson4575]

@@richardsharma283 gotta be smarter than fire........!

[@richardsharma283]

Gary Johnson of course! Took the fire extinguisher out of my car and had it on standby lol!

[@neopatriot2008]

Um....none. Because the flashpoint of cardboard is too high for a heat gun to ignite it.

[@worstnightmare1326]

@@neopatriot2008 $15 heatgun from HF 1100 degrees ,paper ignition approx 450 degrees.

[@sprezzatura8755]

I thought that stainless steel corrodes when deprived of oxygen. Like when it is painted for example.

[@ZynovFTW]

Sounds like the fart can exhaust 1998 Honda Civic Ex owners buy from Autozone lmao

[@gyula6516]

ZynovFTW haha I thought I was the only one😂

[@health-vh8ce]

quattrobros my Cibic would crush yer Quattro 😅

[@hachi-rokuperformancegroup3987]

This sounds way worse than an eBay knockoff of a AutoZone fart can

[@Jimtac]

Loud is one thing, but it doesn't have the nice sound that you get from a nice muffler. Plus your neighborhood is probably plotting your untimely demise. For more sound inside the cabin you can always remove the sound deadening from the floor and firewall.

[@bernardaflores1720]

You can also help to promote paint adhesion by preheating the items lightly w/ heat gun.

[@alwaysdirty155]

How does it look now in 2020? I've never seen painted exhaust last.

[@brad450]

R32 Badge on a 2.0 NA? Wow...

[@milanmastracci]

We're ricers. Thank :)

[@BRaz-xv5rt]

preejaculation

[@adandevora7422]

brad450 just about to say the same lmaoo I got jealous

[@nathanplatt5517]

stainles does not rust it will loose its shine but it will not rust. thats why its called stainless

[@pmm4177]

Nathan Platt poor quality Chinese stainless will rust.

[@toomy094]

It has an insane loudness and you won't be able to tolerate the sound and resonance during a longer driving. I applied rear muffler delete on my 1.4 and it sounds great but not loud and it provides a little bit of popping when rpm drops.

[@GameHEADtime]

Sounds like my lawn mower in florida though

[@OcelotTheFurious]

ALLGames&Tech ahahaha!

[@namepassword2106]

Spraying down the header with acetone will clean it evenly after scuffing up the surface with a scotch brite pad. Just did a set of headers this afternoon.

[@lijkenkist1]

Dude your videos are awesome! This is the first I've ever seen and I have already subscribed :) Keep it up!!

[@emilaznar526]

Good job. Easy to follow and very complete. Don't you just hate youtube videos that leave out important steps. Yours is great.

[@hassassin7049]

I remember when Milan once replied to a comment of mine saying that he has something in mind for the wheels of the mark 4. I'm still waiting for when that something in mind happens

[@milanmastracci]

You'll see why its taken so long :) I promise there's a reason :D

[@darrenhattingh7334]

Two years later. Has something’ happened yet?

[@jojomama4787]

just painted a set of long tube headers and used a can of that same VHT on them...used one whole can on each side,as of this moment they are sitting there waiting for the paint to cure(they say 7 days)...then comes the installation and curing as recommended by VHT

[@ptzish]

Nice video. I'm sure your neighbors love you.

[@JesseFranciaPhoto]

did the paint last til now? any feedback after applying it. thanks

[@AzeOfSpadez]

Sounds horrendous

[@Firstname137]

Damn, everyone here is complaining about the sound it makes.. I'm more excited to see these kids working on something. Some of the best memories I have as a kid was building crap in metal shop or when my dad would buy a clunker and work on it together for fun.

[@1anre]

Best tutorial I've watched in months. Very explanatory.

[@TREKLlN]

Can you pair this with a wrap? Or would it cook the paint

[@vincycharma]

Great vid..just be careful when using the cardboard box and heat gun. Had a wrinkle coated valve cover go up in flames once when the box caught fire.

[@twitchingwithrage4683]

vincycharma shhhhh let natural selection take its course.

[@_johncapellan1365]

I have a question... Can I also paint the intake manifold with this paint ?.... Mine is a little old and it's getting ugly... Plz let me know.

[@PostMortemor]

I just love when people floor their cars on a cold engine.

[@lifeofmike556]

Honestly I see nothing wrong with this video. People always look for something negative to say. I saw some things yes, I'd do different. But I also gained a lot from it. Thanks buddy 🙏

[@rickytant3892]

Thank God for V8s

[@lifeofmike556]

@@rickytant3892 If that's a diss on my car I'd like to let you know I hangout with V8s in a straight line lol especially any before 2012

[@jay7264]

how long before a catalyst inefficiency code. lol looks like chris fix hand movements

[@stonewp]

How has the paint held up over the years? Also what’s up with the R32 badge on a 4cylinder car?

[@trainermanny]

That sounds horrible. . .and can you please remove that R32 badge.

[@mathanyoseph4349]

Would this work on a 4 cylinder longtube header??

[@discokitten5325]

Sell that cat it has rhodium, platinum and other precious metals

[@dannyb20vtec28]

how did that paint hold up? still looking good? no cracking or peeling from the heat?

[@mariodesmo]

Stainless doesn't rust. I find it best to use the kitchen oven to bake painted parts. Just don't tell your Mom, GF, wife, or whoever runs the kitchen!

[@milanmastracci]

Stainless does rust, however it stains-less than normal steel. Overtime, it will rust out

[@carlbenz3341]

If it's proper "stainless-steel" that is properly processed, it will never rust!

[@bryanb7918]

Carl Benz not true, there are different mixes of stainless, and some do rust depending on the content of steel compared to the chrome, and other metals. Just because it has a higher steel content doesnt make it bad stainless steel, its just not the correct stainless for every job. Some are for salt water conditions, some for surgical tools, some for kitchens, then there are cheap stainless for exhaust and expensive stainless for exhausts that will corrode the least.

[@carlbenz3341]

Yeah, there a several types of stainless, I'm aware of that. But the comment section of this kind/level of video isn't a place to discus metallurgy, if you know what i mean... ;) Different alloys for different applications. However, i just commented, because "milanmastracci" thinks he knows shit, which he doesn't. No offense though, not knowing everything gives room for improvement! :)

[@athhud]

Carl Benz clearly you think you "know shit" too. In spite of the fact that your original statement is factually wrong. This comment section is the place to discuss metallurgy when some dumbass comes in and says stainless steel doesn't rust... I bet you'll say stainless isn't magnetic either. The term "stainless steel" includes all grades. Some of those grades contain more ferrous metals than the others. You can't make a generalized statement concerning the properties of a material that greatly varies amongst its grades.

[@john929kelvin6]

Can I clearcoat it? Or is it not gonna make a difference?

[@eriv4735]

I have had stainless headers on my truck for 8+ years and it goes deep woods and swamps regularly and I have absolutely no rust..buy cheap get cheap quality 🤷🏾‍♂️

[@jayhensley4049]

Well my friend that's because stainless steel doesn't rest. But I think you and I both know that. This young kid is just an experienced and totally screwed up a beautiful stainless steel exhaust with a can of $8 paint. Needless to say the little popcorn machine turd monster with a $500 stainless steel exhaust

[@ryanalpeche6921]

where did you're brother get the headers and catless from...I couldn't find them for my jetta...

[@deankay4434]

The newer style cats (As compared to the bead type in the 70's) use a ceramic extruded honey comb grid will crack when running lean, causing it to overheat. This is why it broke inside. Intake air leak, vacuum leak, restricted injector(s), low fuel pressure, incorrect "Tuner" programming, etc. will all cause the exhaust to get extremely hot. The cat cannot expand enough and cracks, worse case; rattles, chunks turn side ways and blocks exhaust flow, increases back-pressure and will not pass emissions testing. With a pre-O2 sensor and post-O2 sensor, will turn the CEL/MIL on once per second. That is a condition that threatens the cat. Yes...He said "Pass Gas". Why would you do that much work on a lawn mower engine? Retired ASE Master Tech

[@ZBrink11]

How did your process stand up to time and wear?

[@dezzymeriei]

Also, could you please please post how to renew answer ceramic paint the old header? I'm going to be getting a new one but it was used and I would like to ceramic paint, and restore it.

[@athhud]

Dezzydaze have it professionally coated with actual ceramic coating. This junky paint is NOT ceramic coating and performs nothing like it.

[@MrRangerZr1]

Yep, hes back at it again with the catless headers...pretty sure its not illegal in his area *LOUD COUGH*

[@mykolashykinov3140]

MrRangerZr1 its illegal. hes in in ontario

[@alexisdawn8322]

Mykola Shykinov not where I live in Ontario lol

[@mykolashykinov3140]

Alexis Dawn everywhere in ontario lol

[@Duuul_]

nn

[@Boozi88]

@@mykolashykinov3140 Bro you're talking out your ass. There are several counties in Ontario that have no emission requirements and/or noise restrictions in regards to road safety vehicles.

[@Vingoku918]

Does painting the headers keep heat down or have to go titanium wrap?

[@stevensdiy9485]

Stainless steel does not rust lower grades of stainless steel like 409 stainless will discolor but does not rust

[@mike.135i]

how do you get a deep sound without the rasp but also with a little crackle when you downshift?

[@MuzzaMiki]

Mike bigger diameter piping

[@dannyb20vtec28]

Mike high flow cat. or straight pipe with a good resonator and Muffler

[@MrAlejandro1ro]

Mike get a good resonator to get rid of the raspiness usually the stock ones kill the deep tone.

[@0cTeT]

@Muzza If you've got a big displacement engine yes... but this engine you want a maximum 2.25 inch paired up with a glass packed resonator and a quality muffler then you'll get your crackling since you'll have enough back pressure @Danny definetly this one. You get a borla muffler and glass packed resonator and you'll get your cracklings ound not that raspiness. Also...on a 2.0 SOHC VW, you don't put anything bigger than 2.25" unless you want people to laugh at your fart can exhaust. Put it this way. Proper exhaust for a VW 2.8L VR6 is 2.5" imo

[@MuzzaMiki]

0cTeT yes but crackling also depends on your ecu and how its tuned

[@iamisatthedoors7228]

You should let your car warm up a minute before you bring it to 6000 RPMs

[@joeysmokez8423]

Can i do this to my cast iron td04 headers on 3000gt? Along w a ceramic wrapping?

[@milanmastracci]

I don't see why not

[@roadworthy6901]

Doesnt sound good, but the burble is nice.

[@iris_uvi]

Hi...i've changed my front seat's with 2 form sparco, I uninstaled negative terminal from the batter and I waited 15 min, after that I unpluged the airbag from the oem seats, and now I keep getting an airbag error message because the ecu can't talk anymore with the airbag sistem...what can I do to close that error ? sorry for my bad english :))

[@kevinlacy5336]

Your movies suck asshole

[@danroxas]

5:08 looks like 2 having a doggie 🤣😂🤣

[@rickycalderon5163]

Any other way to bake the exhaust if you don't have a heat gun? Also same procedure for motorcycle exhaust?

[@ndc5544p]

IMHO removing the cat is just stupid. You gain, how much hp? 10? You could've replaced it with a hi-flow sports cat, gain hp and be legal on the road.

[@1anre]

Norbert Chirilenco explain further, how do the highflow cats work?

[@ndc5544p]

Lanre Oladejo the hi-flow cat is less restrictive than normal. It works the same way, just the openings inside where the exhaust gases go through are bigger. That way it lets the gases flow easier through. You won't gain the full 10 bhp but 5-6 will be in there, plus that the car is still legal! www.autos.com/aftermarket-parts/how-a-high-flow-catalytic-converter-increases-engine-performance

[@rprokopow]

About 99% of the time high flow cats do not meet emission requirments so u will still fail an emissions test without a tune to delete the check engine light. And cats are very restrictive so yes you will gain good horespower from just removing something and gain sound. I gain a little over 20 hp from just removing my cats. And i had the dyno tuner turn off the rear o2 sensors so it doesnt have a check engine light. So i pass emissions easily. Its sad that people dont know this. This is why no one runs a hogh flow cat and why so many people have cat deletes and still drive on the road.

[@chriswebb383]

We don't have emissions here so all my cars have the cat removed .better gas milage too not having the ristrictions

[@astrobot7]

Fuck emissions glad we don’t have it here where I live lol

[@JamesLikesDonuts]

Could you use vht clear coat instead of the paint you used? What would be the difference because they can both withstand very high temp heat

[@pavlo5.055]

isn't it bad to remove the catalytic converter?

[@georgepacan4866]

Pavlo95 yea it wont pass emissions

[@Tha_Zhuk]

It will pass as long as you don't have a cel and they only check via obd

[@james4v261]

george pacan some states don't have emissions

[@mrklimczyk]

It will be bad if you dont do a o2 sensor bypass. Emissions inspection will pass without a cat if the vehicle is an emissions exempt. Different places do it by model year, age, etc, or not at all. My area exempts emissions for 1995 or older.

[@georgepacan4866]

James states? in canada?

[@Remedio19]

Could you paint the rest of the exhaust the same way as well? (muffler, resonator, etc.)

[@erik_caves]

I needed this laugh 😂😂

[@dianahernandez1375]

What size box you use and how high temp you reach and how many minutes you run it

[@dianahernandez1375]

And what speed fan you set it for

[@MrTonyMontana1177]

sounds like a dirtbike

[@GT-fb8nv]

Never heard a dirtbike sound that shitty. Do they really think it sounds good? I am #21 on your thumbs ups! LOL at the fart can.

[@GT-fb8nv]

Hats off to the guys for making the vid, I didn't know about the ceramic coating in a rattle can. It sure did turn dark after a little running I noticed.

[@stoneyswolf]

that paint is a waist if time it'll last a little while then just flake off. if those pipes are 304ss not 407ss they'll never rust just get blue from heat.

[@jstrawser]

Waste, not Waist

[@EthanB-01]

no, this is way worse

[@arniceousmaximus2183]

Looks like you guys had fun with the finished product koolio

[@amaterasu8829]

I wonder how many people watch your videos just to see how ridiculous it’s gonna be.

[@toomey2wheels247]

Does this Reduce heat as well?

[@georgepacan4866]

ur gonna need catalytic man to pass emissions or no roadworthy

[@james4v261]

george pacan some states don't have emmisions. also If it's older than 25 years old it doesn't need emissions

[@Qwerky01]

unfortunately, milan's in ontario, canada, which require cats. doesn't mean you can't trick the emissions scanner, though... haha

[@georgepacan4866]

im in ontario too

[@brandonbassett7887]

george pacan u can use a defouler to trick reading

[@cruzernator]

Qwerky01 how can your physically trick an emissions test in Ontario without a catalytic converter? Unless you know someone

[@AKTesla]

I did the same thing but im able to scrape the paint off with my fingernail.

[@Roflmfaoftw]

Now just get a r32 rear and a nice exhuast and you are done

[@harinderjudge96]

And swap a vrt

[@michaelwolejszo6445]

can you bake the paint in the oven?

[@tylermarini9683]

Got so mad when he said the stainless steel may have oils on it to keep it from rusting smh 🤦🏻‍♂️

[@JerameyDonathan]

In all honestly alot of items that are steel are coated to prevent rusting while not in use.

[@EBB47]

the manufacturer puts effort into making those headers polished. I live in California so I dont have to worry about rust

[@dynaway]

sounds like a pickup truck with a broken pipe

[@leo-lx6xz]

Did the coat last till now? Could you do a new video and show how it looks now?

[@furhadnasserjah123]

Don't bother with these haters, they're 12 and still riding in the booster seat of their moms mini van. Build your car the way you want too. Don't conform like these sheep in your comments.

[@cng3734]

Santa Claus didn't know Santa owned a Honda Civic

[@gjolinares23]

CNG or vw, Mitsubishi, subaru etc

[@inev5341]

Santa Claus Hail santa!!!

[@nothingwrongwiththisname2313]

Are you a sheep because you have the same opinion as me.

[@rickycalderon5163]

Also I can't find a black paint on Amazon you have a link?

[@faisal3398]

Sounds waaaaay too raspy

[@mzondi1970]

How has it held up

[@stevenbruzz6050]

why clean them before you sand just shows you know nothing

[@Dman216]

wear gloves>scuff them>wax grease remove>paint

[@camocrazy6506]

OK now anyone who know proper paint prep knows not to sand anything with oil dirt or grease on it cause you will end up pushing that shit into the surface when sanding, try and rub oil on a old car door and sand that spot the oil is at, then clean prep and paint and see how that finish turns out, maybe I will make a KZbin clip of what I mean. But don't matter you stupid kids wrecked a nice setup and the car sounds like SHIT.....

[@jptmufflershop7218]

What color of the spray paint sir? Its silver or aluminum color?

[@ronburgess2123]

what are you smilin' about? i'd be hidin' my face

[@ads7686]

Can i do this to my oem exhaust manifold?

[@Cloudymind94]

Stainless steel doesn't rust you muppet.

[@robertsample42]

Cloudymind Stainless Steel Does Rust Over Time.

[@SonicMotoVlogs]

quality SS should not, they got cheap stuff there almost for sure

[@silkboxing4454]

Cloudymind Really? How would u know. All your baby toys are made of Plastic.

[@jarretwilson5811]

Wrong stainless steel can corrode. Yes it is one of the most resistant alloys, but under certain circumstances it will begin to corrode. And one of those circumstances is when its exposed to high heat temp and moisture.

[@anthonycphillips2430]

@@jarretwilson5811 correct.. i.e. marine enviroments. all the years i've been on navy ships; everything corrodes eventually.

[@IanHausser]

Thank you. Very illustrative video.

[@crazy4rc]

header.. 1.. not headers.. Goodness people, if you have one header you have a header.. not headers.. frig

[@robertedwards7632]

I have 62 impala stainless trim never rusts?Hanging ur parts defiantly helps speed things getting all the way around at once!

[@RR-cg2rq]

Too much rice that not even Asians can handle it

[@flawns]

What about afterwards? how long did the paint last??