How To Change the Belt on a Vespa ET/LX Scooter

[@phil342]

Has to be one of the best instructors on KZbin. 👍

[@d.milesburkholder6299]

This video was perfect. My belt shredded a week ago. I watched this video, purchased the replacement tools, belt, and roller/weight set. I watched the video while completing the replacement/cleaning and came out of it with a working Vespa. Thank you so much!

[@danwebster5439]

You're a very good instructor. Especially telling why you do certain procedures

[@VespaMotorsport]

Glad to help, thanks for watching!

[@donaldlee6760]

Thank you, this helped me service my twenty-one year old 2003 Piaggio LT150, which uses the same 150cc LEADER 2-valve engine.

[@proegde161]

This man has learn me soo much.Thank you..

[@Aquadicto]

Beautiful et vespa!

[@kdmamm-4190]

Really enjoy watching your videos. Just watched a video on changing a drive belt - I don’t even own a scooter 😀 Nice work and explanation Robot.

[@markparker146]

Great explanation and video Robot! Thanks very much, tomorrow I will attempt to change the belt on my ET4 engine. 😁

[@VespaMotorsport]

Good luck!

[@roywalls5595]

Doing great job working on Vespa Style scooter! Mr. Robot 💯

[@VespaMotorsport]

Thanks! 👍

[@johnh2937]

Thanks for an amazing, succinct video. Robot, you're the best!!

[@SAM-zt2uy]

Super helpful thanks I’ve had quite a few motorbikes and changed chains etc but I’ve just bought my first scooter and want to change the belt for piece of mind.

[@davidclark9086]

This is the most useful video I have ever watched. I have 1999 ET4 and the belt broke so I have to replace it. Without this video, I could not have put the new belt on. Thank you so much. But I still have one problem and is my clutch doesn't have the holed to stop it from turning. Any thoughts?

[@MsBananasmel]

Kickstarters on LX do work but there's a technique to it. You don't actually kick it, just kind of push it down and release. My starter motor failed on my LX and I had to wait to repair it. I could kickstart it first time every time when I learnt the technique.

[@ThatVeryArtGal]

I too have gotten a little help from the kickstarter. If my Vespa is stored for awhile, sometimes it's hard to turn over the first time and the kickstarter seems to give it a little oomph if I step on it a few times, enough to turn the engine over when I hit the key again.

[@grafica-corby]

2:43 is this exactly the same for both pre-leader and leader 125cc vespas ?

[@roywalls5595]

I put new belt on my 2007 Piaggio mp3 250IE because 14 yrs old! The belt 2006 stamp on it even got only 003710 miles but belt crack & wear down and the bell housing on clutch blue color mean got very hot? I changes out everything out & rebuild clutch! Mr. Robot

[@phazttraxx1980]

28:19 "They're shitty, let's get to the point!" Thank you Robot for being The Truth🤣

[@bocaiden1580]

sorry to be so offtopic but does anyone know of a trick to get back into an Instagram account?? I was dumb lost my password. I would appreciate any help you can give me

[@parkerzayden7689]

@Bo Caiden instablaster ;)

[@davidroberts2307]

Looking at that boat anchor case id be taking a very good look at the frame underneath they're aweful for rotting out in the UK. Dont seem to have any rust protection. Perfectly good looking scooters are being written off way before their time due to chassis corrosion. Are there any underside metal body panels to your knowledge available anywhere ??

[@marcellofalchi8370]

complimenti ottima qualità del video. Compliment very nice quality on video

[@charleswheeler3418]

Hi, pleaaase help me, you recommend replacing the flywheel nut, but i cannot for the life of me find out if my lx 125 takes the same size as any other lx or other modern vespa for that matter!

[@sebastiananghel2923]

Hello. I look with interest at what you do. I have a question, when I tighten to the prescribed torque (54-60 Nm) the rear wheel almost locks up and stops spinning. Could you tell me why? thank you very much!

[@justinschiess5794]

I could not enjoy my scooter without you. I have learned so much. I have a 2012 LX150ie After changing the belt and rollers I have the noise at idle that the one in this video makes at 22:50 when you rotate the wheel. Opened it up again and have the noise if I push in the clutch shaft but no noise if I pull it out. in/out difference is minimal, maybe 1/8" I wonder if I mixed up a washer somewhere. Any ideas?

[@philcowley7122]

Hi Robot, great work on your video's and thanks. Nit picking a bit but specify Pozi (not Philips) screwdrivers on European, or JIS on Japanese components and machines. Keep up the good work and thanks again

[@KingshukBhaskar]

34:48 want to know rubber boot connection.. inlet and outlet..also why it is used

[@pawelpat6959]

Great Specialist! Thank you!

[@4427Master]

the part code, please, for the part between the washer and the nut?

[@amar93chaniago]

Thanks for the video, so do you scuff the pulley only when you change the belt or scuff it every-time you clean the CVT? thanks

[@JimLongCO]

Fantastic video! Very helpful!

[@rahi7339]

how different is it vespa maintainance from liberty 150?

[@charleswheeler3418]

can i remove the engine/belt cover for an inspection without causing any damage? is it simple to put back on, or do i need new seals or something like that?

[@stpete5941]

Hi, Just watched your video....very informative and precise. I just purchased a 2005 Vespa Piaggio Vin ZAPC386B. The engine starts and runs well, however, the bike does not move. The prior owner (not sure of his reliability) stated that it needs a new belt. Does that sound like it could be the problem? I haven't taken it apart yet but wanted to know your thoughts off the cuff. Thanks Bob

[@dariusmocan4157]

what brand lift elevator you use .... in this video

[@jaimealbarran6719]

Thank you for the lesson.

[@Jasonleal77]

My engine rides up a lot higher than yours in the video. Maybe time to replace my shocks?

[@averyheaton224]

I have a Vespa lx50 that is making a sort of rubbing sound that seems to be coming from the clutch. It seems to start when I’m going less that 35km/h and when I slow down. What would you recommend doing?

[@ladytradiej8027]

My belt snapped yesterday while riding. Got a quote from a guy that charges $60 call out fee and $120 an hour, said it would cost about $500 AUD to fix. Seems a lot to me. There is definitely a shortage of moped mechanics where I live in Australia.

[@realtalk1278]

Great video man!🤘🔥🔥🔥

[@noelo.9150]

what is the air filter part number for this model?

[@MrSiwy]

Hello I just exchanged belt on my gts300 with your video. Now I am ready to do same on my 2002 ET4. I already ordered those tools to work on gts300. Are they going to work on ET4 as well? Thank you

[@vagrc8644]

Why the kick starter is useless?

[@antonivi8968]

Hey Mr.Robot, I wanted to ask you a question. Why would someone choose a 300cc over a 150cc? I know twice the engine power but if a 150cc can hit 70mph, that's over the speed limit in most places right? You could comfortably keep up with traffic with that speed. How's 300cc not overkill even on long highway trips? Does the 150cc take a while to hit 70 so it's difficulty with over-passing and such? I'm assuming 150cc has better gas mileage as well generally. It seems like a nice middle ground since it seems to be able to handle itself on the highway as well. Would that be a good choice for a first scooter? I don't wanna feel like I may be missing out by not getting the biggest engine lol.

[@andrewalspach4035]

How do I remove a stuck clutch

[@lukelund6726]

Gear puller tool mate, its like a 3 claw hook with a wind up bolt down the middle

[@sofakingfunnyone]

great content!

[@RICHOCHANGO]

When do you change a belt? Robot: 7,000 miles Me: When it snaps

[@VespaMotorsport]

Getting the most out of it, we like that!

[@ОлегАрх-э4м]

Great video, thanks. There are a couple of questions. Will a 110 (120) 80/10 inch tire come back? Is the primary shaft of the gearbox from primavera? And will the 11-inch drive from the LX be on the ET?

[@miguelrodrigues1543]

Hi thank you for the the video keep the good work.. Rollers can you fit them in any way?? Thanks

[@andrewpearson3412]

Hey Robot. I really enjoy your videos; very informative! A few months ago I bought a used 2006 Vespa LX150 with over 11K miles on it. The dealer said they went through it to be sure everything was up to spec. I ride it almost daily for my 12 mile commute to work. It runs and rides great, except that recently I've noticed a bit of a shudder developing when I take off quickly from a stop. I thought maybe that I was over accelerating. If I accelerate very gently there's no shudder. I know that there is some slippage in a CVT transmission. I do not know if they belt/variator etc. has been recently serviced. Is that something to be worried about, or do I need to start thinking about doing a belt replacement and check out the variator and clutch?

[@joedoomsdaypio4374]

That's your belt, bro. It's worn and not grabbing on the sides; they need to be a certain width to "grab" on the variator- so it's been worn thin. Easy cheap fix, but if your in an inclement weather area, be sure to fix it before winter sets in.

[@paulbudford]

Great guide robot.

[@VespaMotorsport]

Glad it was helpful!

[@Thealbanianbarber]

I can succesfully start my Vespa ET4 50 cc with a kickstarter on my first try.Dont think i have ever run out of batterry though

[@FedericoRubenPalamara]

excellent

[@walterguan6252]

Hi Robot, you are doing relay great work. Can I share the video on Chinese website? I will indicated author and KZbin address.

[@richdavis151]

Oddly, I only count TEN screws that hold the case….both on this video and in my ET4

[@TomTom-fl8xt]

Perfect .....

[@juanposada9319]

I keep counting 10 bolts not 11...

[@stpete5941]

Forgot to add its a LX50...

[@raizzarhey12rheywatanabe]

My freands can i give one of motorcycle vespa 150cc i like that motorcycle but i have no money to buy so very expensive 🤩

[@catsgonom]

Just did this service on my black 2009 S150. Very helpful. 😎👍🛵

[@user-kx8tp6oc5k]

Öldeckel drauf☝🏻☝🏻☝🏻☝🏻

[@Shurup33]

japan scooters is really much more times better at all!!! i have no idea how vespa is still alive... parts are more expensive, parts are lower quality, repairing is more difficult etc...

[@JamesPradaRanger]

Amazing! 😮

[@abhijitkundu1879]

Sir I think you are personally recommended doctor who has been actually hired by Vespa organisation 🌹🌹🙏🙏please needs blessings so that I can lay my hand onto another…. mean machine and occupy my garrage properly 🌹🌹🙏🙏