How to change the spark plugs on a 2007 Hyundai Santa Fe

Here are some of the tools that jimthecarguy uses
www.amazon.com/shop/jimthecarguy
How to change the spark plugs and remove the upper intake on a 2007 Hyundai Santa Fe

[@scottwithrow3793]

This video saved me SO MUCH MONEY. Our Santa Fe desperately needed new plugs, but I knew it was going to be an involved process. This video is absolutely fantastic, and I couldn't have done the job without it. The fact that you take your time, and show and explain everything makes all the difference. THANK YOU!

[@MariaGarcia-yf1oy]

Yes very helpful thank you

[@mosshopper7932]

Just did my 2009 Santa Fe and this video was a saviour. The two air hoses under air intake at the top right of the video were a b@*&h to get at. WIthout removing them I was able to move the entire assembly up and to the right which allowed plenty of room to access the rear plugs. Not as pretty as what he did but still worked. Thanks for the video.

[@nastytaco420]

He changed the gasket tho did you have any trouble not changing the gasket on it?

[@k.michaelrose1898]

Very helpful, well filmed and detailed... thank you. Also very much appreciate the fatherly advice of a master mechanic as you repeated the warning about being careful bolting into aluminium...... ordering the parts and will watch again before tackling the task.

[@chuckydubree1925]

I'm just a shade tree mechanic and I got to do this this weekend this video will make it a lot easier I would not have new to order the gasket thanks so much god bless and keep twisting the bolts, great job

[@pppicb]

Hi Jim, many thanks and a big ole thumbs up to You and this video. Very helpful and detailed guidance...great education! Thanks for your time and patience putting these videos together and keeping them out here for folks like us. Just taught a Father and Son something new!

[@smith4456]

Oh my god. Thank you so much for this long, very detailed video.

[@proudnot2bliberal]

Jim you have the BEST car repair videos on the net! Very good detail & explanations of each process. Ive watched a couple other of your videos & you always have a great tip like replacing the gasket in this one. Sounds like you shop in in central Mass by your accent

[@bobtpapa]

Great job Jim. You are a master mechanic who has so much experience that it makes your hands glide over the work.. It was great to see your artwork.

[@jimthecarguy]

Thank you for stopping by and your kind words.

[@gerrybuffett770]

great vid. I did this and took me 8hrs + 200$ but its now 13 yrs old and sometimes i forget i even started it because it runs so smooth.

[@bushund]

Finally someone is telling this so simple, that I could use your video as a correct diy manual. HAYNES didn't deliver this time. But you did! Thank you so much.

[@taylordout93]

Thank you Jim I’ve watched your video about 100 times now just enjoying the process. The tune up was easy due to your help. Thank you 🙏

[@jimthecarguy]

Great to hear! Very good job.

[@mikewaters6339]

I'm getting ready to do this in the next two days. It's giving a misfire on cylinder 5, code p0305. I may do all 6 while I have it apart, or at least the three back. Great information and instructions, sir. Saved many people $$$ . I'm a new subscriber.

[@jimthecarguy]

Good luck! Welcome aboard.

[@oldskoolfattieg]

My gosh, you are a life saver. Very well filmed, and detailed. This non mechanically inclined dad thanks you sincerely.

[@jimthecarguy]

Glad to help

[@andyarendt6905]

Just changed the plugs on my 2009 Hyundai Santa Fe GLS, and I couldn't have done it without this video. Thanks Jim!

[@ojerasa5293]

I'm going to try it on mine. Was it easy as it looked?

[@rillyjo5810]

did you change gasket?

[@NoneMechanic101]

Thank you. Tomorrow morning have to do a friends back spark plugs and valve cover gasket. You are a big help

[@bayviewautorepair]

Great good luck.Let me know how you do.Thank you for stopping by the shop today

[@johndelpozzo8402]

Nice work Jim,..... I wish I had an honest and reputable mechanic here on Long Island.

[@jimthecarguy]

Thank you If you ever need any advice just ask me.

[@eddiemartinez265]

There are where are you? we are in brentwood nelson auto repair look's us up on your computer.

[@KB-if8qu]

I appreciate the walkthrough. I watched closely and replaced my spark plugs.

[@erinfoyle59]

So much work for something that you make look kinda easy like a jigsaw puzzle why dont they just build them where it would be semi easier you give a lot of good information thanks I might be able to try this someday

[@TheBigBigSean]

I completed the job, thanks to this video. Didn't even need to bust out the Haynes.

[@jimthecarguy]

Thanks for watching.I'm happy to help. Don't forget to hit the bell for notifications when a new video is posted

[@MrSleep-ju3pf]

Thank you so much - I was able to complete this job on my 2007 Santa Fe tonight due to your great video!

[@johnkirklen8565]

HE SHOWED US EVERYTHING IN DETAIL THANK YOU SO MUCH

[@Nick-tl2or]

Just in case anybody was wondering the Torque specs are 15 to 22 ft. lbs for the spark plugs

[@gotchaghost3003]

Outstanding video! Thank you for your help!!

[@jimthecarguy]

I'm happy to help. Watch for the next free tool giveaway coming soon.

[@blue_moon1986]

EXTREMELY helpful!! Great video!

[@pauleysisland4959]

Hi just did a 2009 sante fe ,a tad different ,but you walked me right thru it Thank you brother!!!

[@jimthecarguy]

Glad I could help

[@pauleysisland4959]

The car is running greaaaat!!!

[@younissaleem223]

from Iraq I send you thanks very much for information in simple language

[@jimthecarguy]

Thank you for watching I'm happy to help.

[@John3_16Q]

jimthecarguy my 2008 santa fe has a 2.7 and autozone says i need the long threaded ones but when i pulled out the stock ones they were the short ones.. any ideas?

[@mr.wonderful4318]

This video saved me a ton of money and frustration! Thank you sir!!!

[@jimthecarguy]

I'm happy to help.

[@rotaman8555]

Fantastic video! Very helpful. Thank you!

[@jimthecarguy]

Glad it was helpful!

[@michaelturner7641]

Ty for the very informative content I'll be doing this job soon if I can find an intake. And will I have it off I might as well go ahead and do the plugs. I am by no means a professional. I have watched your video over and over again both of them pertaining to my 2007 Hyundai. I know your directions by heart Now I just have to procure an intake as mine is leaking. cars got 190,000 the only thing that'll make it worth it is if I do the job myself.

[@davidrife6191]

Awesome video! Thank you so much. These motors really make you miss the straight six.

[@NoneMechanic101]

I did it. I followed all your steps. The only thing that I found hard was the back bolts.

[@jimthecarguy]

Great job.Very nice

[@rillyjo5810]

did you have to change the gasket?

[@Mark.thy.Plumbr]

Great videos keep up the awesome work! Great Mechcanical skills👍🏻. Have a 2009 Santa Fe getting a little bit of the Hyundai ticking sound any suggestions? Thanks!

[@aorsin]

Great video. My problem is replacing everything back. Would be great to see video of the parts that the bolts bolts hold in place.

[@sufferinggift2345]

Yes, close ups and arial shot of top of plenum cover on engine to see the gasket and the right side of intake area where the hoses are you said you got to show us, lol. Great job though. You gave me the courage to do it myself. Probably save me $300??

[@stevet5629]

Thanks, excellent show

[@jimthecarguy]

Glad you enjoyed it

[@jakekrasner548]

Thank you for making this video it really helped. The only thing that was not talked about was which side of the intake gasket goes towards the mani or the block. Does the raised side of the gasket go towards the mani?

[@pablodelacruz9536]

Thanks for this video

[@bryanmay4118]

Is the process the same for a 3.3 liter engine? My engine looks a little different and i cant find a 3.3 liter guide

[@djr3485]

Jim do you ever recommend the use of anti sieze on the spark plugs for easier removal? I have heard of stripped plug threads and seized plugs turning these kinds of jobs into a real headache although have no idea how common such things are in reality. Thanks for the video.

[@jimthecarguy]

Good question.I usually will use anti seize if the plugs come out tight or don't turn out easy

[@glenohs8521]

Great video. You are an excellent mechanic and teacher. Only an engineer could come up with a stupid design like this.

[@jimthecarguy]

Thanks 👍

[@dcubero.555]

Hi Jim, i hope you are doing great. Quick Question. I have a 2007 2.7cc Santa fe AWD. Sometimes when going up in a inclined road the car goes really slow even when hitting the gas pedal to the end. I heard that it might be the EGR valve is dirty. Any Suggestions? Thank you

[@Bellaandkelly]

Jim, thanks for the video. I am curious, did you drain the coolant fluid? I read the Chilton manual before hand and it stated to Drain coolant fluid...? Is this IF the small hoses are connected, though I noticed you did not take those apart? also, the order of tightening screws back...does that matter? within the manual it gave an order of A-H and then 1-8. Should I follow that procedure when putting Manifold back? Thanks again, this was a great tutorial.

[@jimthecarguy]

If you pinch off the small hoses that carry the coolant there is no need to drain and fill antifreeze.I did pinch off the hoses in the video.As for the tightening sequence yes follow the manual or you can follow what I did in the video.Start in the center and work your was to the ends.Thank you for stopping by the shop

[@Bellaandkelly]

jimthecarguy Excellent. Thank you, sir.

[@mohammadakif9473]

thank you

[@suezaple4950]

Awesome thanks so much

[@heavyhitter637]

You should have show, when removing the 3 screws on the back side of the intake manifold. Just too quick to show that the manifold was removed and not taking the time to show where the 3 P.i.a screws / bolt are.

[@jeffreyberezowski9907]

would be nice to see the tabs etc when removing the coils

[@alverkoro435]

Thanks for the video, What is the torque value for the plugs. Thanks

[@m.j.r.productions6276]

18 - 21 ft lbs. if using a torque wrench

[@alverkoro435]

@@m.j.r.productions6276 thanks

[@mikebrundle9753]

Jim what about the two bolts hiding under the backside of the manifold at either corner? They use hex bits. How did you get those out?

[@Nick-tl2or]

Those stay in

[@ghd1959]

Jim, Do you recommend replacing the coil pack when changing spark plugs?

[@thehegt]

No , if it’s still ok you don’t change it .

[@TrealTalk187]

I would say if the vehicle is over 120k then yes go ahead and then Especially the back 3, you will thank me later, good luck

[@sirsweetness8332]

Jim, Do you find yourself checking fluids on all the cars that come into your shop to save the customer from catastrophic failures and for your own liability while it is in your possession? I see many videos where a mechanic is working on something specific and notice no brake, steering fluid (examples) even though that is not what it came in for. It wouldn't be good for a different issue to arise out of customer neglect while in your shop. Just wondering...

[@jimthecarguy]

Very good question.When I get a car into my shop and I'm under the hood I will always look at the levels.

[@Faisal-ch9is]

Hi Jim. Do you have the part number or exact name for the gasket to replace? Is it absolutely necessary to replace that? In Canada they are selling the upper and lower gasket set for $100 which seems expensive to me. Thanks.

[@sufferinggift2345]

Id say, check the gasket for cracking/dry rotting. Go on EBay or rock auto and see if they have more affordable prices? If your cars past 5 years old you might want to go ahead and replace the gasket if you have the money?

[@rcair123]

Please if you are doing this job, cover the intake holes with a clean rag or something. Small parts lost in the intake can turn a pleasant job in to a nightmare. Otherwise fantastic video, keep it up Jim.

[@MIRAJADESIGN]

Thanks for this walk-through. It’s a much bigger job than I was expecting. The dealership tells me I need to replace the rear Plenum gasket. I am guessing I could do this at the same time. Is it a lot more work?

[@jimthecarguy]

Actually that is what I needed to do here as well .The plenum and the gasket had to come off to get to the rear plugs.Thanks for watching. Don't forget to subscribe.

[@MIRAJADESIGN]

@@jimthecarguy Thanks for the reply! You mentioned "Intake Manifold Gasket". Is that the same thing as the Rear Plenum Gasket? Or are they 2 different gaskets. That is what I am not clear on.

[@jimthecarguy]

@@MIRAJADESIGN The plenum and the gasket is being removed at 19:20 in the video. The plenum is also called the upper intake manifold . The lower manifold is the part below that.

[@MIRAJADESIGN]

@@jimthecarguy Thanks. This is helpful.

[@sufferinggift2345]

Jimthecarguy Yup, Great job, buuuuttttt, Lol. It would of really helped to see a arial shot of once plenum was off and the Two hoses on the right ( are those tiny hoses? ) . Thankya Sir

[@raymoundmendoza2453]

good job jim. kinda sound like moe in three stoogies.

[@DesignBuildFixReview]

I just paid 850 to replace two gaskets and the alternator. I got it back and the car revs up and down randomly with or wo AC runninng in park or drive. Worse with ac. I was told need new coils on pack. and plugs. THERE is no engine light just occassional flutter. I CLEANED THE THROTTLE BODY WITH SPRAY BUT DIDNT HELP. ANY IDEAS If no engine light how do you know which coil?

[@jwill9877]

If you take out the front corner studs you don't have to take out anything to the right of the manifold. You only have two bolts in the back of the manifold and you don't have to mess with all the other brackets and what not. I had mine off in less than 15 minutes

[@jimthecarguy]

Thank you for watching and your input. Don't forget to subscribe.

[@sufferinggift2345]

It’s just what he preferred to do to avoid any possible damage to kinked hoses or accidental breaking of pulled cords / hoses etc... :)

[@franksmith9434]

What is the recommended period for relpacing plugs on 2007 Tucson

[@truth9678]

When you change the spark plugs on a car that reached 100,000 miles do you have to change all the coils too? I had a mechanic already put one spark plug in and he put a new gasket on the intake now I want to take it back and get all the rest of the spark plug done do I have to buy another intake gasket as well?

[@BrickaBoy]

what was the torque for the spark plugs?

[@erinfoyle59]

I was wondering about the gasket you replaced and why and why did you clean it and how you called it a name I have never heard of in earlier replies they say "peplum? Thanks

[@Luckingsworth]

"Plenum"

[@Condor1970]

This makes me want to get my daughter a 2008 Grand Cherokee 3.7L instead. Mainly just because of the ease of maintenance like this.

[@sufferinggift2345]

Had many of them. Just watch the radiators

[@dq3604]

Hey Jim what's the name or part number for the harness cover that bolts to the intake manifold with the two 10mm nuts in the front? Mine is totally gone and I would like to replace it.

[@jimthecarguy]

D Q Your best bet is going to a dealership and they can show you a picture so you can point out what you need.

[@sufferinggift2345]

Google it :)

[@muhammadidries6877]

Good job... I have a question for you my friend

[@jwrn4u]

Is there anything else i should replace while im in there, any sensors, injectors, coils etc,

[@gerrybuffett770]

EGR valve

[@pablodelacruz9536]

Is very good 👍 👌 👏 🙌

[@ronaldcach2779]

Hi Jim, do you know the reason why all the newer cars come with engine covers? I do not see the sense in using them. THANKS FRIEND

[@jimthecarguy]

Yes the manufactures try to make it more neat and modular.

[@ronaldcach2779]

Thanks

[@jimthecarguy]

I'm happy to help.Thank you for watching

[@eddiemartinez265]

There just for looks a waste of money i have yet to meet anyone who like's the way there motor look's with that cover on it most folk's did not know it was there.

[@jwrn4u]

The engine cover is supposed to help protect the hood paint from excessive heat

[@genconex]

Instead of going through all the hassle of removing the intake manifold could you simply remove the cowl to gain extra room to swap out the spark plugs?

[@jimthecarguy]

Good question. Yes the front plug you can but not the rear ones. I'm happy to help. Thanks for watching.

[@jedidias7091]

Un hooking coolant lines do you need to burp the system?

[@bcuadrado8]

Could you show where the Crankshaft sensor is on a 08 Hyundai Santa Fe limited 3.3

[@jimthecarguy]

bcuadrado8 As soon as I get one in the shop I will. Thanks for your input.

[@heshamelfazea5603]

thank you very much for this video also i like to check the PCV valve and the VVT valve to becuse you allready open allthis things

[@sufferinggift2345]

How do you do that? How do you know if they are bad or Ok? Thanks

[@PortyChannel]

I replaced all six plugs and still have a misfire indication (Flashing Check Engine Light). Is there a way to identify a possible ignition coil?

[@robwatters9583]

My number 2 cylinder is misfiring.....is that in the front or back....gonna change all plugs but more curious...thanks

[@itgetsbetter9636]

Rob Watters coil

[@lorrainepurnell-ayres8451]

Jim I have a 3.3 engine 2007, I put it back togather, but evidently didn't connect something. My brakes pedal won't move. what might not be connected. The motor sunds much better.

[@lorrainepurnell-ayres8451]

@sportster1988 the problem was the hose to the boot I inverted it. It was a hose with flow insert.

[@sufferinggift2345]

Lorraine Purnell-Ayres So you unplugged the brake line by accident?

[@GeorgeGardinier]

really good video. i have a 2011 Tuscan 4 cylinder, with 105 kms, will i get better gas mileage if the plugs were to be changed, of course i am in Canada. it is 10 liters per 100 km's. have you done a 4 Cyl Hyundai engine for plugs

[@jimthecarguy]

It may help a little.I think the plugs should be replaced at around 60,000 miles

[@travisguy5630]

Great video. It was hard to see the part about the gasket though. Can you please specify what type of gasket it is and if its essential to buy a new one? Thanks

[@jimthecarguy]

I'm happy to help.Te gasket is the upper intake manifold gasket.Thank you for stopping by the shop.

[@jackbarbett]

My 2009 3.3L was produced in late 2008 and uses that one gasket. In the late spring of 2009 they changed to a plenum that required the big gasket and 3 double soft rubber ones on the inside.

[@williamtreat5893]

what was the final torque on the intake?

[@douglascrabb2062]

torque specs for spark plugs please

[@JCWorkouts]

What is the spark plug order for this engine

[@1justdont]

Sorry for being late to the party, but would anyone have a link to the ignition wires? I'm changing out the spark plugs and coils but the wires for a 2007 are impossible to find..

[@jimthecarguy]

Thanks for watching. Check Rock Auto on line.

[@johndoesphoto]

What is torque spec for spark plug??

[@jedidias7091]

My gts has this set up and it took my about 8 hrs to do ..i said il never buy another car with the plugs under the plenum.. well i buy a random find Hyundai Santa Fe great condition lol pull the engine cover off and this mfker is the same lmao. Not as bad as the GTS but still looks like a pain and i will take on this job when its time

[@Nick-tl2or]

Does anyone happen to have the part number for the intake manifold gasket?

[@MJsChannel2016]

Where is the EGR valve located on this vehicle? Can anyone help point it out?

[@ngawangthekchhok8484]

Is it same for both diesel and petrol??

[@jimthecarguy]

Ngawang Thekchhok no diesel doesn't have plugs thanks for watching

[@lifesgreat6804]

where is the gasket that you said should be replaced?

[@APC9906]

Changed out my spark plugs and wires but ended up getting misfire on #3, #5.

[@Luckingsworth]

Doing this for a relative. Oh my god this is going to be a nightmare of a vehicle. I will take my corolla any day of the week.

[@jimthecarguy]

Thanks for watching . It really was not that bad but I also love the Corolla

[@mohammadhajjat]

Very god ..pls how chang sensor oxygen

[@jimthecarguy]

Thank you for stopping by the shop.

[@josefinessin6647]

What gasket is that????

[@rcyukon]

did it sputter after or no i followed this video and mine sputters

[@D25864]

It's probably the ignition coils that's the problem I'm having changed the plugs yesterday but didn't change coils because of cost found out I got three bad coils

[@sufferinggift2345]

D25864 I’m curious? Did you have this problem before the spark plug change ?? Or you put the coils back on and had the problem? Thanks

[@BrickaBoy]

also, when you put the air assembly back together, you forgot to put the little lip underneath the little clip

[@williammills8953]

Yeah. I just started to take the intake manifold off.

[@ogtomb1087]

What to do if u followed the steps but the car wont start?

[@bkgourmet]

So why do mechanics charge for 3 hours of labor if it takes 30-40 minutes to replace!?

[@dn6514]

Still waiting to hear what the torque specs are.....

[@sufferinggift2345]

He said 13 to 17

[@brobot7980]

Ohh someone didn't follow the tightening order.. torque spec was right on the manifold, but for anyone watching this there is an order in which you're supposed to tighten the bolts to ensure a proper seal with no leaks. Easily found online. I came here to check something else, but it's sadly not in this video. Not his fault, I'm a lazy cheater when I can be responsibly.

[@donaldfragale3733]

This was a #$%^&*()_+ because you cannot see the brackets that hold down the intake plenum manifold, I got it taken care of and it's all back together but it took 5 hours of struggling, I can do in now in and hour+ now that I can find and know where everything is, back of my legs are like... FORGET IT now sheesh! lol

[@JuanNOnly123]

Great video, this job could have been completed a lot faster with electric or at least air tools.

[@donaldfafard]

is this a 2.7 or 3.5? .

[@heshamelfazea5603]

its 3.3

[@eddiemartinez265]

All the big time idiot's at the Hyundai or all the other yoyos cant fine a better way to build an intake than to lay it over the motor like that just make for a big repair bill in the end

[@mr__No]

All this just to change spark plugs!? Remind me not to buy Hyundai.

[@jimthecarguy]

I'm happy to help.Thank you for watching

[@TheOneWithTheAccent]

You need to tell me that since my girlfriend owns an 08 Santa Fe

[@shellcracker18]

I gave up. My 94 Chevy takes 10 min and done

[@thehegt]

All cars model , all v6 engine need to remove the intake manifold the change the back 3 spark plugs , only 4 cylinder car is easy to change spark plug