How To Connect Active Balancer To Lithium Titanate LTO Battery

How to connect active balancer to Lithium Titanate ( LTO ) battery 1 bank or 2 banks 40ah / 80ah
Yinlong Battery
#caraudio #balancer #MadDogAudio #Yinlong #CustomBoxUK
Subscribe This Channel - / @egahood
Follow on Instagram
Mad Dog Audio UK - / maddogaudiouk
Custom Box UK - / maddogaudiouk

[@CollinBaillie]

Why put the under the bus bar? I would have thought for the best throughput in the series cells, the bus bar would be better getting full contact with the individual cells. As this is just the balancer, the ring terminals would be best connected between bus bar and nut, as it uses much less current than the C rating of the cells.

[@colinriches1519]

Video is much better with sound off.

[@raiden72]

but this is like every happy of all time

[@patrickday4206]

Especially at 2x speed 😂

[@loulou4991]

Where did you buy them at?

[@garycotz563]

Model and Source for balancer?

[@pauliusbackys5053]

So now only + and - from car battery and green light to go ?

[@elpatoflipao8188]

If I buy 6 YINLONG batteries and join them in series to get about 15 volts with an S6 balancer, if I put a charger that gives 15 volts and 160 amps could I charge this kind of lithium battery??

[@subratakumarhaldar9104]

How much price &how much AH ?

[@egahood]

80ah

[@raiden72]

this is two 40ah joined together in parallel

[@GorillaKnobzUSA]

4s or 6s balancer for a 40ah yinglong bank

[@egahood]

both... can connect max 12s per balancer

[@elite_shadower_6057]

@@egahood sorry for to foolish question but what can happen if the balancer isn't Ran

[@egahood]

@@elite_shadower_6057 banks not be same volts and charge each separate

[@patrickday4206]

Music is irritating

[@bhojmarkam290]

Kitne rupaye ka hai

[@Metalhead396]

Thanks for not explaining a damn thing.

[@raiden72]

what questions do you have then, maybe comment with a question

[@Metalhead396]

​@@raiden72that's OK. I bought a balancer and figured it out by myself.

[@nagarajanups697]

Bma

[@nagarajanups697]

Bms

[@patrickday4206]

Not needed for lithium titanate

[@raiden72]

@@patrickday4206 do you know why this is?

[@patrickday4206]

@raiden72 because they can be charged to 100 percent discharged to 0 and are almost impossible to over or under charge just need a balancer and a charge controller

[@patrickday4206]

@@raiden72 and can be charged at freezing temperatures