How To Detail & Ceramic Coat A New Car! 2020 Ford Mustang | P3 Ceramic Coating! (31.3)

​‪@CarCraftAutoDetailing‬ 👍Please Like the Video 🔔 Subscribe 😀Enjoy
If you’d like to support this channel and future content please consider buying me a coffee at:
☕️ www.buymeacoffee.com/CCAD
Visit the CCAD Amazon Storefront for my top detailing products:
www.amazon.com/shop/carcrafta...
Products used in video: (items may be updated to what I currently use/recommend)
🇺🇸U.S.A. 🇨🇦Canada 🇪🇺Europe Links:
Great Nitrile Detailing Gloves: ebay.us/Ewr3rz
IPA Panel Wipe: amzn.to/3Vhi21H
General Use Towels: amzn.to/3zzzR2S
Engine Bay Dressing: amzn.to/3D1fNIs
Detailing Brush: bit.ly/3C9wJLk
Great Foam Applicators: amzn.to/3DzX7Pt
Ceramic Coating: amzn.to/3gaInhR
Towels For Coating Removal: amzn.to/3EvyO7c
Detailing Inspection Light: amzn.to/3rHWoW
Detailing Apron: amzn.to/3ysiVKZ
🇦🇺 Australia Links:
Great Nitrile Detailing Gloves: www.waxit.com.au/products/gri...
IPA Panel Wipe: www.waxit.com.au/products/car...
General Use Towels: www.waxit.com.au/products/bli...
Engine Bay Dressing: www.waxit.com.au/products/car...
Great Foam Applicators: www.waxit.com.au/products/eco...
Detailing Brush: www.waxit.com.au/products/car...
Ceramic Coating: www.waxit.com.au/products/nv-...
Microfibre Coating Gloves: www.waxit.com.au/products/car...
Towels For Coating Removal: www.waxit.com.au/products/aqu...
Coating Inspection Light: www.waxit.com.au/products/tak...
Detailing Apron: www.waxit.com.au/products/car...
ℹ️ Some listed products in the description box contain Amazon and other affiliate links. By clicking these links I’ll receive a small commission on purchases made without any additional cost to you. If you purchase through my affiliate links it greatly helps support this channel and future content so thank you in advance❣️
🎧 Music tracks in order of play:
So Lovely By Moarn
Shifting by Sun Wash
Emo Man by Shay Raviv
Arrecife by Tomas Novoa
Still Running by Stanley Gurvich
Our Dance by D Mills
#fordmustang #ceramiccoating #carcraftautodetailing

[@tonymulreid6347]

Unreal. The level of detail you go into and the dedication to the client is incredible. Fair play.

[@ilikechickensausages2075]

Sandro, Larry, and Jim White are the go to "Real YT detailers" there here to teach and show us! Information is power and we are always learning.

[@pjfan173]

I like chicken Sausages Check out Brian at Apex Detail channel

[@craig.encinitas]

pjfan173 - “ preparation is key...”

[@karolisrum6573]

@@pjfan173 Yeah Brian at Apex detail always gives some great tips. I also like Pan TheOrganizer.

[@gabrielpauloignacio9170]

Thank you for spoiling us with another great series, Sandro! We appreciate your hardwork in making these top-notch videos. The result is stunning as always. That red paint literally popped and is jaw-dropping. Well that's expected considering you're the brain surgeon of detailing. Keep up the great work mate!

[@speed23ism]

I would never drive a car after seeing it so clean!!!

[@TripleGAutoDetailing]

WoW... When you strive for perfection and the results come out better! 💎 Pure mastery Sandro! Bravo mate...👏🏻

[@littlediablo]

Imagine buying a new car of any price and the paint and presentation being even 50% this good? We can dream on.......

[@aidendeharo2575]

Ok I just HAVE to acknowledge the down right amazing editing especially those last shots, good on you mate.

[@JRLEY]

That was crazy satisfying to watch. Such attention to detail. Can't wait to apply this knowledge to my new truck , if I can get it with this supply shortage insanity....

[@jonwilliam1441]

You and Jeremy Stevens from shine supply are hands down 2 of the best detailers out there. Such in depth videos, explaining proper techniques and showing what works for you aswell as potentially us. Your work is 2nd to none and always enjoy these videos thoroughly. Amazing work as usual mate!

[@CarCraftAutoDetailing]

I really appreciate the kind words thank you!

[@chrishing8491]

Wow what a amazing finish would love to see it in person as I reckon it would look even better

[@nicolomarchillo4451]

As professional detailer and ceramic installer. The after shots are where it really all comes together. Art.

[@fastmonaro05]

Well done yet again Sandro. This is how a NEW MUSTANG should look when new. Got some serious POP to that paint.

[@ruru2500]

That filter you used on the outside shots really makes everything pop

[@petesreef1891]

Wow, wow, wow what a fabulous job. Great work Sandro and thanks for all the great tips 👏👏👏👏👏

[@Codriver72]

Once again a fantastic result. It is a treat every time you publish a video. I always pick up something new and the videos are so beautiful. Thank you.

[@TG-cx5bn]

Sandro, an old saying "price does not always represent good value" Your detailing represents great value, and the price is a reflection of this perfection.. Well done again.

[@asalouros]

Awesome video Sandro. Answers many of the less addressed issues of ceramic coating. Thanks for the content mate!

[@subarubrat]

Great work, Sandro.👍 Another very enjoyable series, thanks for taking the time to post.👍

[@mikestefani7414]

Amazing work Sandro!! The looks amazing!

[@giogamer4825]

Really great to have seen this 3 parts "journey". Learn some way i could use on my car. But it is especially amazing how you really take your time and you do see this in the end result. Keep up the good work, as always.

[@1990Ravens]

Damn that mustang looks amazing! Awesome job!

[@victorsalazar6951]

Outstanding work buddy! Very impressive.

[@GreenWitch1]

Sheer perfection as usual Sandro!

[@CarCraftAutoDetailing]

Thank you mate!

[@alanwallace3253]

Wonderful series, instructional, satisfying to watch . Liked the touch at the end with the reveal to the customer. It has to be gratifying when they appreciate the art you bring to your work.

[@Merkava76]

Nice chill house tunes mate

[@Andy-From-England]

Extremely awesome video sandro looks stunning it just says something about your skill when it looks better after coming out of the factory

[@cadebrown2092]

What an amazing video. Dude you put so much effort into all of this. Respect.

[@CarCraftAutoDetailing]

Thanks mate, glad you enjoyed it!

[@naotinhamaisralph]

Another nice and passionate video 👏👏👏

[@salvadormora3331]

Absolutely amazing video series my man! Loved it! The mustang looked so gorgeous at the end. I super appreciate all the education along the way for my own detailing as we just purchased a new A4 and I’m nervous getting started.

[@Proto.Fabrication]

Phenomenal work. I’m about to buy a new mustang as soon as the 2021s hit dealers lots. I’d pay you in a heartbeat to do mine but I’m in the US. Keep up the good work and making such good videos. I can tell you’re a man of quality by the jobs you do and the time and effort you put into editing these videos.

[@simonfleming3964]

WOW!! Another amazing job. I was shocked at the state of the car before you started.

[@harrykotsonis3470]

Cant thank you enough for all your hard work you put into this mate...Thanks Again! 👍👌

[@CarCraftAutoDetailing]

You’re most welcome mate and thank you!

[@atrimmer3009]

And we cut to a shot of Larry Kosilla at the desk of his new office /studio with his head in his hands while Sandro's last shot of the Mustang in the driveway is playing on his monitor.... Well played Sandro!

[@kyleguest3126]

Outstanding work!! Very informative series. Keep up the great work, stay safe and best regards from 🇬🇧

[@Strattos4]

Great work again mate - inspiring stuff.

[@butchpeyton2469]

Absolutely gorgeous work!

[@TWTx2015]

Incredible work. Cheers!

[@raypalmer7733]

Excellent work sandro, lovely red

[@jamesevans938]

i would like to say that it depends where the Mustang is built and I know that a Mustang is built in Melbourne but in the UK I have a 2020 Mustang 5.0 V8 GT in velocity blue which I believe was built in Flat Rock Michigan and when I got it about 3 months ago it only had very minor swirl marks and that's all i have actually surprised at how good the finish was tbh and the only correction that's was needed was a once over with finishing compound

[@7071t6]

Mate again you uploads outshine the rest well done Sandro and keep up the great work your doing, your the best mate. 🏎🏎🏎🏎🙌✌👌👍😊

[@alangc76]

astonishing finish

[@ibrahimshareef3984]

Came out looking fantastic!

[@neilbenzie3618]

Sandro, outstanding work as always , paintwork has a awesome glow about it now compared to what it was 👍🏻😁

[@ahceneabbas3767]

Wonderful work👍

[@cheftonyx1]

Wonderful documentation and detailing Sandro

[@sappucinoo]

i love your work and all your videos :) such a shame you lost all comments in past videos :( i just started with carpro and those responses would help :) anyway cant wait for new series :)

[@Ludo_A]

A-mazing good job (and tutorial series) !!

[@josemacon7385]

Yessir thats how you detail!

[@voodoonights1671]

Amazing finish.

[@faazk]

I wish I was in Australia and in your city, so amazed with your knowledge and hence work.

[@inthbiz57]

Camera work is excellent!

[@CandyflossCottonCandy]

CCAD = Quality

[@markradovic4493]

Excellent job Sandro. That red looks like it's dripping wet, it's so glossy. Still don't quite have the confidence to try applying a full Ceramic Coating myself, however, just bought NV Glass and thought that might be a good introduction into ceramics. Long weekend coming up so plenty of time to prep and apply. Thanks for all your hard work and advice. 👍🍻

[@ExclusiveTint-CarDetailing]

Just watched this, Well done Sandro your work is outstanding.

[@ExclusiveTint-CarDetailing]

Oh did you know shinemate have made new da machines, have you tried or heard anything about them?

[@CarCraftAutoDetailing]

Thanks mate, and yes I have tried them but that’s all I can share about them for now 🙂

[@VIM97]

Informative video...a little to loooooong!!!

[@kusko143]

I just did my 2022 supra on red,polish the paint with GRIOTS compound and apply 2 coats of CQUARTZ ceramic coating,took me 12 hours but is worth it,I'll be happy if it last 2 years. Very brave to use a polisher for 1st time on a brand new car but it really work out for me,cost me like 300$ for all materials and tools.

[@CarCraftAutoDetailing]

Great to hear and you’d be hard pressed to find a decent detailer to it for that price so well done.

[@LightSpiD]

Worth working on it 😁 Car looks awsome 😍 Showroom state 😮

[@ruisimoes7847]

AMAZING

[@coffeecupenlightenment508]

Did sandro know about the new shinemate polishers?....sandro is the ambassador of waxit ...the importers of "shinemate" lol...great video sandro...I'm a master car detailer of Melbourne....but don't do detailing anymore...hoping to build a dream workshop like you one day ....I've worked for bayford and nearly every other brand of car over the years....it's an absolute discrace what happens to new cars...I used to run my master detailing business inside mercedes...the car detailers used to have screw fights...throw number plate scews at each other and hide behind new cars...while laughing as the screws landed on the glass and paint of the car....amongst seeing many other toe cringing car destroying practices everyday... probably the world will see a new industry arrive in 10 years time...where it becomes standard to hire a " detailing inspection company" to inspect the car before pickup...and deal with all legal issues ...to prosecute dealerships and retrieve compensation...to pay "for a $2000 new car detail"...when you buy a "new" car...the car should be "new" lol

[@shaniranikauboj]

Perl is good for leather too. 1/3 dilution and i wipe almost whole interior. Seats, dash, rest plastics...

[@based54]

sure you can apply a ceramic coating brilliantly , but can you spread the peanut butter on bread without struggling ?

[@khutek3114]

Best trilogy ever!!! 👍👍👍 (Even if... "P2" in the title??? 🤔😅)

[@CarCraftAutoDetailing]

Oops! Fixed! That’s mate!

[@akisbaklavas9328]

very good job

[@4agePower]

#1 Sandro!

[@herewegoagain404]

Everything about this video is stunning. From the workmanship, attention to detail, dedication, video production and most of all the result. Well done Sir. A true master at work. Might one enquire what you charged the customer for this work?

[@xr8rick]

OMG, I want a red Mustang now.

[@aqwplayer222]

Stunning results 👌 keep it up. Do you mind if I ask what tyre dressing you used? It looks really nice and clean.

[@CarCraftAutoDetailing]

Thanks, and believe thats Nv Onyx on the tyres

[@pjfan173]

I’m fairly sure the thumbs down is from Fords Quality Control

[@CarCraftAutoDetailing]

Lol

[@Mogsy28uk]

Look up Mustang or Focus RS on AM Details channel (based in Scotland), they had same issues with brand new collected vehicles, no idea how the dealers don't spot these BIG issues when doing the PDI! 🤦‍♂️ Well i know who the dealer was, so i know how they could have, but most good dealers wouldn't allow it to be issued.

[@PKDetailingPL]

Beautiful beautiful beautiful amazing job! As always :) Just one question - what about all the glass? Did you apply the same ceramic coating on all glass? Regards

[@KuroGadis]

🥺beautiful

[@Madaboutshooting]

Just picked up my new Mustang Bullitt - I asked the Ford garage not to touch it so I could clean and prep it myself - after a wheel clean, rinse and two snow foams I did a contract wash with Meguiars Wash plus - on inspection is has a huge circular scratch on the boot lid and lots of bird line marks - I have contacted Ford who want photos ... let’s see what happens!

[@CarCraftAutoDetailing]

Good luck and good on you bringing it to their attention. If more people hold dealerships and accountable there can be a shift on how manufacturers do things.

[@marksafady4263]

Thanks, Sandro. Does that handheld flood light make it a lot easier to see the rainbow/flashing?

[@CarCraftAutoDetailing]

If it’s used in an environment with lower or softer light with a good technique it can help show both flashing and high spots. I did a separate video on it a while back showing how to use it.

[@kikcodog]

Looks fantastic! That red just pops now! Sandro have you tried any of the ceramic primer products designed to do light correction and polishing and leave a base layer for the coating to bond to? Gyeon quartz primer would be an example. Any thoughts on them?

[@CarCraftAutoDetailing]

Thanks and yes I’ve personally used CarPro Essence, Nv Morph and both Shine Supply Burnout & Slickback as coating primers. If the paint extremely soft then the resins in them can actually give you a little hardening an extra slickness which helps prevent marring and scratches during the coating stage, which can be a big help on those supper sensitive paints. But otherwise I personally prefer coating on bare paint and not masking any haze if I’m being payed to do high level paint correction.

[@kikcodog]

@@CarCraftAutoDetailing Great, thanks! I think I have the perfect situation that calls for something like Essence. Wish me luck!

[@CarCraftAutoDetailing]

Good luck!!

[@michaelkay3496]

Dang Son! I've never had my detailer give me a complimentary service!

[@sappucinoo]

And I always get some :P

[@indetailcarcaresolutions3770]

This is a great series Sandro. As my work/business keeps going from strength to strength it is experts like you that I turn to just to ensure I’m following ‘accepted’ procedure. I have only one question, do you coat the glass or paint first or doesn’t it matter? Or possibly, does it depend on the job at hand? Once more, thanks for all the work you do in helping those less experienced. Lloyd

[@CarCraftAutoDetailing]

Thanks Lloyd, and I typically prefer to coat the glass first just so I’m not leaning over the paint after it’s been coated.

[@dillanmistry]

Wow

[@brettkelly1436]

Hi Sandro, awesome content as usual, what if the mustang has vinyl strips can they be polished and ceramic coated, how will they react to the IPA cleaner is it safe to use.

[@CarCraftAutoDetailing]

Thanks and if the strips have a gloss finish you can polish them, but if they have a matte or satin finish then no, but they can certainly all be coated regardless of their finish.

[@windjunky]

33 hours! holy shit! Looks great though

[@EverythingIsPhysics]

Beginner question: Can the foam applicator pad used with Nova PERL be washed and reused? If so, is there a good method to clean them out? How about the microfiber cloths for the ceramic coating? Thanks for the great series!

[@CarCraftAutoDetailing]

Yes you can reuse the foam applicator, just make sure to use it with similar products, and I use a velvet soap bar and warm water to clean it out. If you have a bucket ready with warm water and detergent and put you’re used cloths straight in as you switch to clean ones you can reuse them a few times for coatings.

[@twinprime]

Amazing video. You touched on several points beginners would be asking themselves. One I'm still wondering is how much product to be used on a sedan bonnet? You applied the droplets on the cloth looks like twice for this car's bonnet, but not sure if it's twice or 4 times. :(

[@CarCraftAutoDetailing]

The bonnet was split into 6 sections and I applied a bead line of product on the applicator before each section.

[@gilortiz6254]

What an amazing job you have done. Which country are you? Great job. Great video. Great information.

[@CarCraftAutoDetailing]

Thanks, Australia 🇦🇺

[@nsw72]

You should clone yourself and open shop in Syd as well! 😁

[@creaghdebarbanda6470]

Hope restriction is lifted soon, so I can bring my bmo for a visit😀

[@atfuni27]

Hello, You mentioned, if you are new to ceramic coatings I should start with a product that flashes immediately. I just could not understand the two products that you mentioned in this video. Could you please tell me the two products I should consider? Great videos!

[@CarCraftAutoDetailing]

I believe was talking about CarPro U.K. 3.0 and Nv Nova Evo, thanks!

[@yaishmatheen4274]

Hi Sandro, your videos and your work have an ethic and a discipline that I simply admire. If it’s okay, I has a question. When cleaning heavily soiled engine bays (requiring a rinse with hose), does one use a wheel cleaner or a car shampoo? Also, why don’t you dilute the Carpro Pearl with water, which is what I have seen some other detailers do. I love your work, keep ‘em coming!

[@CarCraftAutoDetailing]

Thanks mate, and a degreaser would be at the top of my list for a dirty engine bay and even a tar remover can be a great help. I’ve personally found that Perl can create a patchy finish when diluted, but not always, it really depends on the specific trims, but I don’t seem to have that issue when used neat.

[@yaishmatheen4274]

Thx Sandro, I appreciate it!

[@jillou4981]

Hallo Sandro. Excellent tutorial. Thanks. Does the blue tip of the air blower u r using work as a regular tornador? Quite rare to see that shape... thanks.

[@CarCraftAutoDetailing]

Thanks, and it’s just a Tornador style blower - not the one that attaches to a bottle

[@jillou4981]

@@CarCraftAutoDetailing cool Sandro thanks big.

[@kmpaton]

Sandro, how imperative is it to use Carpro Dlux on trim and rubber, vs just using UK3.0 for the paint and plastics?

[@CarCraftAutoDetailing]

Some of it is just personal choice, as they are both great coatings regardless of the surface, but I have had particularly good successes with Dlux on wheels and plastic trims, so that’s also part of it.

[@johnkim1656]

is UK 3.0 a coating that flashes quick for newbies? What are your favorite newbie coatings? (I couldnt hear what you said in the video)

[@CarCraftAutoDetailing]

UK 3.0 is a fantastic coating for first time users as it does flash instantly after laying it down thoroughly.

[@MYEVILTWIN1000]

Great to see the conclusion Sandro. You say at the end you sank 33 hours into this job. For a new detailer starting out trying to figure out what to charge, do you have an hourly rate that you just simply multiply by the amount of hours you expect to spend on each job, or do you charge by the different processes and products that you apply to each job?

[@CarCraftAutoDetailing]

Time is always the greatest expensive and an hour rate based on an estimation of time is how I primary quote jobs. But that rate has includes things to sustain your business or else it will fail. So your rate needs to take into account things like your product costs, taxes, rent, bills, insurance and depreciation of equipment that will need to be replaced, and of course you need to live and pay yourself a wage. But another part of it is of course the experience, skill and results that you bring to the table, so just like any other industry, the better you are at what you do the more desirable your services become and the more you should be charging based on that skill level and what you deliver to your clients.

[@chadrandolph9874]

Hey Sandro! Great series! That engine bay is nice. Absolutely a superb job on that 5.0.... I will be applying a coating soon and I picked up on something you said about laying down extra criss-cross applications to help the coating flash quicker. I will be coating a white car in natural lighting. (Outside) 😁 so seeing the coating flash may be more difficult for me. I’m not using one of the popular brands for this job and I don’t believe it’s a quick flash coating according to the manufacturers assessment. They do say that it is a very forgiving coating...whatever that means...lol Any advice?

[@CarCraftAutoDetailing]

Thanks mate! I’d just say do your first section to try and gauge how much time it needs to sit on the paint in your environment and with your technique before you level it down. Generally if it’s more forgiving to use, that tends to point to a slower flash time, so as you mentioned, you could perhaps work it in a little longer with your applicator to encourage a quicker flash time if that’s the case.

[@chadrandolph9874]

Car Craft Auto Detailing Thanks mate!

[@TheHOOfan1]

I wish I could believe most detailers treated every car they detailed as well as Sandro treats the cars he details. Sadly, I doubt that.

[@sbrick9589]

i quick question the air blower you used is that werth getting to blow out buff pads of a normal one is fine no real difference

[@CarCraftAutoDetailing]

If you use a rotary or forced rotation machine then I highly recommend it, but if you just use free spinning DAs, then a standard air gun is fine.

[@Alchemist124860]

Practice makes perfect, I hope I can be on your level one day, glass is my weakness I always end up getting oily like streaks on them and can seem to get them clear when I’m doing a dressing on the rubber trim, any ideas on how to deal with this issue?

[@CarCraftAutoDetailing]

Being a bit more liberal with your glass cleaner should help, so don’t be afraid to really saturate the glass with it as well as ensuring your cloths are perfectly clean and you just use them for glass and nothing else.

[@Alchemist124860]

Car Craft Auto Detailing great advice I’ll give it shot 👍🏽

[@ahceneabbas3767]

Thank you for the previous one .. What step it takes for a acriditation of nv .. Do you have a contact for future professional use .. Thank you

[@CarCraftAutoDetailing]

You can contact the guys at Nv Car Care if you’re interested.

[@jasminebonhomme9723]

I’m very interested in the microfibre cloths you are using to buff off the ceramic coating! Could you share please? Thank you so much.

[@CarCraftAutoDetailing]

They are listed in the description box - Economax Blizzard cloths

[@jasminebonhomme9723]

Car Craft Auto Detailing thank you I definitely missed it when I looked. Much appreciated!

[@DK-pr9ny]

Since you used a ceramic coating we can't buy, which over the counter coating would you recommend?

[@CarCraftAutoDetailing]

Generally if you go with a consumer brand of coating that is tried and tested with a good reputation you should be fine. I guess a couple of the ones I personally use and like would be Nv Nova Evo and Carpro CQuartz UK & SiC.

[@ludak83]

This is almost too good of a job for a Mustang 5.0! One would think that the paint like this you can only see on a garage queen Ferrari.

[@tats997]

Amazing job! Any chance you could find out the paint code, I have a gt myself and want to change mine

[@CarCraftAutoDetailing]

Thanks, and hopefully if the owner or someone who knows it can comment here to help you out!

[@harrykotsonis3470]

Rapid Red!

[@bz6626]

Hi did you polish or use clay car before you did coating?

[@CarCraftAutoDetailing]

Yes it’s a 3 part series, you’re watching part 3

[@user-df3dq7oq9q]

Can i use Carpro eraser on engine room cleaning instead of Nv Clarity?

[@CarCraftAutoDetailing]

Yes you can