How To Fix Damaged Transmission Cooler Line (Andy’s Garage: Episode - 62)

[@stanmorton8975]

Been working on this issue for two days, trying to get lines to fit. Never occurred to me use high pressure hose. You're a genius.

[@dreamingcode]

It was sooooo hard finding a video on this simple and common task. Thank you posting. I do want to use all copper so I need to search how to bend it.

[@Dargox59]

I've spent 2 weeks trying to repair this part and now I found this video. Thanks so much.

[@jakesdaysoff4683]

This is the closest repair video to my issue. Thank you

[@richardtrowell8812]

Thanks for video. Excellent guide for repairing transmission line. Fittings for transmission lines and power steering requires using special wrenches to prevent stripping out. They are made of a softer metal than other bolts. Brass I believe.

[@ccachella]

not paying 300 bucks for just a cooler line, Thanks for this video.

[@BillBob-q6d]

Did you get a part list

[@CharlesFockaert]

Perhaps should have flared the end of the existing line to help prevent hose from slipping off.

[@randyschmittou8708]

That's exactly what I was thinking. I have done this exact repair and had it blown off by the pressure in the line.

[@simbagarage5943]

Totally agree... transmission 200 psi. It'll go flying without a flare.

[@HealthSupercharger]

the pipe from the radiator is 3x as long as needs to be and that forces the hose to make an S curve instead of a L curve going straight up into the upper metal pipe. I would only have the radiator solid pipe stick out 1.5 inches and i would use crimp connectors instead of worm clamps that can vibrate loose and burn up your transmission if the fluid leaks out too much. Crimp connections can be crimped with vise grips and like you did double clapped it is ideal. I would also try to protect that hose with another hose or some metal cover or braided metal hose because transmissions burn up if you run them low. Best is to not use the radiator transmission coolers because if they rust out they will contaminate your transmission and destroy it.

[@geraldbrakefield3874]

you need to make a video

[@richardtrowell8812]

How would you keep transmission fluid cool when under load? Or from burning. The transmission comes with a cooler for a reason.

[@sisokaspari3923]

Great job simple and easy

[@tonitattooful]

perfect exact same issue I have and wanted to make sure I could use hose. awesome!

[@ilyk1ng]

thanks man really appreciate it this help me alot i thought i was gonna have to replace the whole line

[@PhillipsVision]

Awesome, glad it helped

[@vincentx8429]

you da truth you just made my hole project be completed in on day

[@micahhill4786]

Power steering hose is what you should use fuel hose will just get eaten away. Just a suggestion

[@PhillipsVision]

Micah Hill thanks for the feedback 👍

[@gavindemetreu3788]

They also make hose specifically for transmission fluid as well. Sold at most parts stores

[@Mid-Ohio]

Just had this issue tonight on my 94 Ranger 4.0 put some new parts on for a good tune up.Went to fire fire an test drive had a puddle of tranny fluid the ground...won’t move at all seen it squirting out at that fitting as u described in your video.Imma try to mimic your idea thanks 🤟🏽

[@PhillipsVision]

Mid- Ohio- cool man, good luck 👍

[@Mid-Ohio]

Phillips Vision welll went to auto zone and Advance here in town they had no help for me unfortunately.So went to a friend and he managed to cut me a line and reuse that fitting.Had to put 4qts of transmission fluid in lost a lot.But job is done your feedback definitely helped! 👌🏽👌🏽

[@PhillipsVision]

Mid- Ohio- good, glad it helped. Just make sure the line you used is for fluid and high pressure

[@roberthein2156]

New metal line, heat it, bend it on any round pipe, let it cool, then cut off any length. Connect your rubber hose: straight.

[@PacoOtis]

Wow! Thanks Dude! We definitely owe you a beer! Best of luck!

[@PhillipsVision]

Thanks for the comment, glad the vid helped

[@BVegasadventures]

I’m going to try that on my 71 Lincoln. I changed the radiator and the transmission line got cut…. Hopefully this does it. I really don’t want to replace the whole metal line. Thanks

[@NsanityGarage]

Good info man... will be using this to fix a trans line that twisted on me during my LS swap

[@PhillipsVision]

NsanityGarage thanks for the feedback, glad it helped

[@kurtgood2914]

Thanks for sharing this and it helps me a lot

[@paulroe4646]

Killin it brotha!

[@ThomasJoyner-z6k]

Some one done this to my truck before I got it and all the hoses leak.

[@rish77ify]

Great video Andy I have a similar leak, would I need to use any gasket sealer between the nut and pipe? (Both replacement pieces are brass)

[@PhillipsVision]

No gasket needed

[@rish77ify]

@@PhillipsVision thank you! Worked out so far!

[@nikorawirimana6443]

Hi, sorry you don't have listed the size and bits that you bought, ie: the pipe type and hose fittin names and recommended hose use or the type that you're using in the video.

[@PhillipsVision]

The line is 5/8 I believe. This video was filmed a few years ago. This car was a 1986 Pontiac Fiero GT, not sure if it’s the same size for your vehicle

[@jonathanromero8639]

You won't notice any leaks from just starting the vehicle, but if not done properly it will leak when transmission fluid starts getting hotter while driving

[@olheghtt]

What's wrong with using hose? I'm replacing my radiator this week

[@PhillipsVision]

@@olheghtt you can use hose as long as it is rated for liquid. But keep in mind that hose could fail eventually

[@apacalyptic1freelancevideo213]

thanx i just wanted to see how the fitting was mounted . no thread tape or sealer just bare thread fitting . got it

[@mariorios7318]

Thats a good ideas tbh shit i be dealing all this time to fix my damn truck always the store be sending me the wrong cooler and now u gave me a really good idea not wasting my time at the shop and thanks for the ideal

[@PhillipsVision]

Mario Rios glad it helped

[@xzytwo]

Wow that's a great idea!

[@81mj]

I'm doing this today until my new lines get delivered.

[@robertbenitez8302]

Where did u buy the new line with the thread it bolt?

[@PhillipsVision]

@@robertbenitez8302 Autozone

[@bettyboop4342]

I was wondering was that for a Buick Rainier?

[@PhillipsVision]

No, Pontiac Fiero GT

[@Birk21883]

Where do you get the replacement line and fitting you used?

[@PhillipsVision]

Autozone or Advance Auto

[@MackAttack-lv3nv]

Where can you find that new piece u replaced the old piece with

[@PhillipsVision]

@@MackAttack-lv3nv AutoZone

[@MackAttack-lv3nv]

@@PhillipsVision thanks 😭

[@johndrennen8342]

So this is a question that pertains more to your video regarding replacement of a starter on a 4X4 Trailblazer with the 5.3 in it and more specifically the part of that video relating to moving the transmission lines just enough to be able to remove the starter. I have done that and still am unable to finagle the starter out of the truck and I really dont want to go the loosten engine mount / jacking up the engine route. Do you think that removing either or both ends of that trans cooler line is a viable solution to getting that starter out? Thank you VERY much in advance.

[@67oldsD88]

Where do you get that short premade trans line?

[@PhillipsVision]

@@67oldsD88 from a parts store by order or the dealership

[@JuanyJuanes]

damn i took apart a ton of shit to replace a factory trans line, this would have saved a lotta time if i had found the parts

[@susu-mi7kx]

Hey Andy I replaced the radiator... ( 2001 grand cherokee laredo 4.0 6 cyl) both lines were seized to busted up radiator so i disconnected them from the trans lines( skinny hoses) just I did not trace where the top radiator trans cooling line connects back to. please help. does top radiator line connect with top skinny hose.? help a girl out please its been days...

[@how2wwii249]

Thank you so much, saved my life, man! 🙏🙏

[@blazeaglory]

My 1990 Honda prelude has a female threaded compression connection and it's in a tight spot that has to have a quick short bend in the connection or it hits the outter end of the radius rod. Where can I find something like that?

[@johngortatowski-qx5xs]

On the transmission please , the part that the line goes into ,that installed on or into the trans 😊

[@robracks3896]

After you add the new fitting is the tube that is clamped in supposed to be able to move or no

[@justilianoacevedo2185]

Can you show where the transmission hose connects at the engine. I tolled my Mustang pulling it and the hose got disconnected at the engine. That nipple where the hose goes connected became missing. I actually don’t know what it looks like or what’s it’s called. I called it ‘nipple’ Thanks 👍

[@douglaslicause9100]

is it Pa State inspection legal?

[@chainfeeds2.043]

what size tool did he use anyone help me out i have a stuck bolt like this also what size tool

[@PhillipsVision]

It’s a standard mini pipe tube cutter. It can cut 1/8 - 7/8

[@orlandoferreira5412]

Where I purchase that hose with fitting ?

[@PhillipsVision]

Autozone

[@ONE-ADAM-TWELVE]

My car, a 2016 Chevy Sonic, is in need of a TRANS COOLER LINES TO RADIATOR repair. I came across this video because the dealership wanted to charge me $456 to do this. Is that too high? Any other alternatives?

[@PhillipsVision]

Very high. You could use coolant line and flare it

[@khalifahpierce5186]

What kind of line is that with the fitting on it you use to go in the rubber hose please get in touch thanks

[@PhillipsVision]

Metal Transmission line

[@kangokidkidd4037]

Where did you buy those new clamps auto parts store just has a assorted selection I need about 10

[@PhillipsVision]

Yeah, I had them from a large assortment pack I got at Harbor Freight

[@kangokidkidd4037]

@@PhillipsVision okay thanks Amazon it is then

[@WerkToday]

Great Video!.Subbed up!..I need to know what size line you purchased. I inherited a 1992 pickup and need to find out what size the thread/line I need.

[@PhillipsVision]

Thanks. There are different sizes you can purchase. Find out what size your trucks uses and purchase the matching size

[@travistripp331]

Having this issue on a 2007 Audi a4 a week after changing the radiator

[@karitunes1]

Plz Help!! 97 Ford ranger lower radiator transmission cooler line leaks. I replaced lower radiator fitting with hose/hose clamps like you but fluid leaking at both sides of rubber hose, so I got the compression fitting to join both steel lines and they leak too. What's the issue?!! I tightened hose clamps tight as possible and even a wire tie was tighter. Idk what's wrong. Thx for reply

[@PhillipsVision]

The transmission line has pressure so if the fittings are not properly attached it could be the issue with leaking. Was the hose the correct inner diameter?

[@kidschannel4354]

Thanks Big Homie🔩🔧👩‍🔧

[@robertglasper320]

How did that job hold up on the leak ?

[@PhillipsVision]

Great, no issues

[@8Cylindres]

Hey mate thank you for the video! Quick question! Are the hose clamps sufficient enough to hold the hose in place on the line?

[@PhillipsVision]

Should be if tightened properly

[@8Cylindres]

@@PhillipsVision Thank you

[@Melocole1]

Where did you get your replacement line tip from and what part name is it under because no one seems to be able to find it anywhere I go?

[@PhillipsVision]

Autozone. It was years ago so I don’t have the part numbers

[@roddawg320]

Hello Andy, great vid, but have a question. is it ok to use a type of thread lock or Teflon tape instead of the process you went through? thanks in advance.

[@PhillipsVision]

You could try that but remember the transmission line has pressure so you want a secure connection

[@cesarmora1911]

Does it need to drain first before cutting it?

[@PhillipsVision]

Yes, or you will need to have a pan underneath for dripping

[@TheHazelberg]

Hi Andy, Thanks a lot for showing this repair video. I was just wondering, is there not a need for bleeding air out the pipe? perhaps not, thats why I am just asking :-) I have sweating hoses and will replace the hoses with power steering hose just like you did.

[@PhillipsVision]

Good question. Yes, any time you work on the transmission you want to bleed the air out.

[@franktalan5441]

@@PhillipsVision how do you bleed the transmission?

[@btaylor3559]

I know nothing. When splicing a trany line, are air bubbles any concern or does compression burp any such out of the system?

[@Dargox59]

no

[@anthonybesterwitch2546]

Thanks 😊

[@agentbey]

Do you recommend using loctite on the fitting threads?

[@PhillipsVision]

I’d recommend using it on most threads, that’s good stuff👍

[@carrieyates9605]

How do you disconnect underneath jeep

[@nealhead7673]

I thought you said compression fitting ??

[@GhostOfBrickCity]

Thank you

[@tonycadena6033]

Thank you for your help

[@RossHndrsn]

Mechanic did my line that way and it blew off the next day. You MUST flare the line or it wont stay on. Any mechanic should know that. I was out of town and dealt with a dumbass. Costly lesson in time and money..

[@marketgotitall798]

Hey can u use thread sealin

[@beyondeternity3009]

Were there any o rings on the line ?

[@PhillipsVision]

No

[@micahobaca]

Do you need to double flare or is single flare ok?

[@PhillipsVision]

Single should be fine

[@alanOHALAN]

Is the house 3/8 or 5/16?

[@djohnnineonesix820]

Dude.... My car leaking atf is a 97 oldsmobile achieva.. I wish have all that space... Removed the adapters put some shelak and reinstall them on the rad. Then wait 2 days re screw the lines into the adapters...

[@donwest5387]

flare your "stub"; so the hose won't blow off

[@gman77gas]

Thanks

[@mikenorwood5195]

Thank you sir !

[@donwest5387]

what was wrong with the original connection?

[@PhillipsVision]

It was bent and causing a leak at the input

[@brussell639]

That radiator looks like it needs to come out as well.

[@PhillipsVision]

brussell639 it was removed and upgraded to an aluminum high performance one in a layer video.

[@markbensley138]

@@PhillipsVision I need help ASAP. My sister hit a coyote last night and her car is dumping transmission fluid from the bottom of the radiator. The car will switch gears but when you hit the accelerator it won't go anywhere

[@PhillipsVision]

Mark Bensley DO NOT drive the car, you’ll burn up the transmission. She may have pull the tranny line from the radiator or damaged the line itself underneath. I would get the car jacked up (use stands) and fill it with cheap fluid. Have her run the car in park and have someone check underneath where it’s dripping from. If it’s a damaged line you will have to repair it.

[@Texaca]

@@markbensley138 --- don't drive it, you'll damage the internals of the transmission 🤔 and it'll never drive again .

[@Midwest374]

Mine just went out had no power anymore RpM reved up when you hit the gas and all fluid leaked out. Hope something like this didn't cause internal transmission damage transmission fluid was 3 quarts low as well

[@lastkings4293]

Where did u get the line ?

[@jamiekessler424]

Is that cutter tool just a pipe cutter?

[@PhillipsVision]

Yes, available at any hardware store

[@nealhead7673]

The old "threaded bolt" 🙄 I HATE the bolts without threads. WHAT were they thinking ? 🥺

[@marthagarrett7805]

how many hrs it took you?

[@PhillipsVision]

Around (2) hours

[@joegray6269]

What kind of wrench did you use

[@PhillipsVision]

Joe Gray to be honest I don’t remember the exact size, that was filmed a while back

[@joegray6269]

@@PhillipsVision the reason why I was asking was because I stripped out the. Transmission cooler bolt on on my radiator and I had to do what you did and I'm thinking about using a compressed fitting or just a thick rubber hose and some tape and clamps

[@truhunk1]

Whatever works.

[@granthopper5]

Where did you get the pipe by chance?

[@PhillipsVision]

Grant Hopper Autozone or Advance Auto. They both have it behind the counter. You’ll just need to measure what thickness you need. You’ll also need compression fittings

[@Nowata918Liddell]

I have a question/issues with my transmission cooler line

[@donwest5387]

a "kink" won't make it leak

[@marketgotitall798]

On bad threads

[@PhillipsVision]

I would recommend re-cutting the threads first with a tap & die set

[@donaldaulenti4386]

Shoe Maker

[@susu-mi7kx]

I recently replaced my leaking radiator myself, . Now, I went ahead and bought new lines But, I can't for the life of me figure out which rubber hose to plug the top vs bottom in. Does it matter? Thanks! The radiator lines bought are part number 52079753AB. please help a girl out