How to fix F66 error code Miele T1 Series Selection Tumble Dryer

Just a quick video showing on how to fix the Miele F66 error code on a tumble dryer. This is a brand new machine, we thought something had failed but it just needed some simple maintenance.
#miele #f66 #fix

[@ovieemakpor4993]

This man is my savior, I love him

[@burnhope]

This is the answer! Thanks so much for putting this video up. I actually thought the 'lower' heat exchanger filter was meant to be gray - it was a 2mm layer of compacted dust!!

[@rothmanchiropracticwellnes3477]

Thank you. My dryer is 3 months old, this was happening to me. Appreciate the great instructions and assistance.

[@DanielJohnHowTo]

Great to hear!

[@lauram1208]

Thank you, saved a lot of time trying to figure out the issue. The dryer is less than a month old, this was very helpful.

[@jonathanlevine7844]

Thank you, I had the exact same problem on a one month old machine. You saved me a lot of time.

[@DanielJohnHowTo]

You're welcome!

[@Monika-mb6jh]

You are my hero! Fairly new dryer, had cleaned out the top lint filters multiple times! I just *thought* the plinth filter was supposed to be gray!

[@RoseBlack58380]

Thank you so much. I couldn’t understand why the error code kept coming up and the machine stopping. Your video was a great help.

[@yangpeng5784]

I barely use my TI dryer for 10 months and got this problems. This really helps. Thx a lot :)

[@DanielJohnHowTo]

Glad it helped!

[@PeterGraczer]

thank you! our dryer was a couple weeks old and we got this error. was thinking i'd need to call a technician until i watched this. much appreciated :)

[@DanielJohnHowTo]

since moving the machine into a bigger room this issue has never happened again, I think it's to do with the sensor and room its in.

[@pamelaleitman9200]

Holy toledo! You are a dryer angel! Thank you so much!

[@4erox349]

Thank you very much, saved myself from a huge headache!

[@OShaughnessyC]

Thank you so much. Very clear instructions, and they worked!

[@paulschluter9699]

I did'nt see any solutions in German. So it was very helpful. Thank you!!

[@007suzanne]

perfectly clear and easy explanation -- thank you!

[@DanielJohnHowTo]

You're welcome!

[@GhhyBbbb]

@@DanielJohnHowTo Hej

[@maximilianmehm6427]

Thank you very much! Needed a fix and this solved it!

[@Red-jl5dq]

Thank you very much it helped me for sure from GA . Cheers

[@scottcaporale9892]

Fantastic!! Thank you so much for the help!👍

[@Bridgejones08]

Thank you kindly Sir, you have helped me with that very issue today.

[@DanielJohnHowTo]

Most welcome!

[@andylee8440]

Same model , same fix . Thank you . The white outer dust layer was so fine and so white it looked like a cloth layer until I vacuumed it !

[@DanielJohnHowTo]

Great to hear!

[@pelolep]

Yup, I had the same issue - I thought the outer layer was a shade of light gray! Oops! Thanks for the video!

[@mprmike]

@@pelolep Saaaame! I pulled it out last night and thought it looked clean. NOPE.

[@honourestark]

Lifesaver! Thanks very much for the video

[@annahu2022]

Thank you , I was wondering how to solve the problem, now everything is ok, thanks!

[@DanielJohnHowTo]

You're welcome!

[@katephillipsconnolly9880]

Brilliant-thanks for taking the time to help

[@DanielJohnHowTo]

Glad it helped

[@Sydneystatus]

Fixed my issue thank you for the great video!

[@DanielJohnHowTo]

Glad it helped!

[@gokatgomotorcycletraining]

Your Brilliant. Fixed everything all up. Thanks a bunch

[@DanielJohnHowTo]

You're welcome!

[@beyzaozel2663]

Thank you! This is super helpful!

[@DanielJohnHowTo]

You're so welcome!

[@AussieJiminThailand]

Worked for me. Thank you 😊 👍

[@alexandrawheeler1]

Thanks kindly. I was so confused til you helped.

[@DanielJohnHowTo]

No worries!

[@911turbojk]

You have saved my day ! thank you !

[@DanielJohnHowTo]

Glad to hear that!

[@SuzyApple13]

Thank you. I will try your recommendation. Appreciate it.

[@ollierahanian7190]

Fabulous. Thank you. You made this so easy-Cheers!

[@DanielJohnHowTo]

Glad it was helpful!

[@MrMaawe]

Great explanation. Thank you for the help.

[@DanielJohnHowTo]

You're welcome!

[@markgoodick4628]

Thank you so much, saved me a lot of time and worry

[@DanielJohnHowTo]

You're welcome!

[@sandrakirby5455]

Thanks. Worked perfectly

[@DanielJohnHowTo]

You're welcome!

[@ryumitsurugi2088]

God Bless you man! This saved my day!

[@DanielJohnHowTo]

You're welcome!

[@odumufriday]

Get paid

[@helenorrin7537]

Wonderful! You saved my day xx

[@DanielJohnHowTo]

I'm so glad!

[@mhadzopoulos]

Thank you! It works

[@stevenv.4659]

Worked for me, thanks for sharing.

[@DanielJohnHowTo]

Glad it helped

[@gerardkoster9394]

Thanks a lot, works again

[@helendebruin2520]

Very helpful. Thanks so much!

[@DanielJohnHowTo]

Glad it was helpful!

[@mollymonroe6768]

Thanks! It worked!!!

[@nyctony6733]

I have had my Miele Dryer for 16 months and have been getting the Dreaded F66 Error message and after changing the Kick Plate Filter at the bottom left, still had the problem until this morning where I removed both interior filters and put them in a bucket filled with Hot Water and some Murphy's Soap ( this stuff is amazing) I then brushed both sides of the filter screens and I was amazed as to how much dirt came out of it. I then blew the filters out with air from my leaf blower to dry them and re installed them in the dryer and as I write this the dryer is back to working properly F66 Error message all gone So save the $95.00 service charge and buy Murphy's Soap and with a little elbow grease you will be a Happy Camper Once again. Good Luck

[@janshellew3248]

Super helpful thank you!

[@DanielJohnHowTo]

Glad it was helpful!

[@RTE078]

Thanks so much for this!!! :-)

[@h1sname1sunknown]

It was helpfull, thanks a lot!

[@williamstathopoulos1120]

Thank you, my friend!

[@samanthasnowden780]

Super helpful! Thanks :)

[@DanielJohnHowTo]

You're welcome!

[@richardb5298]

Thanks very helpful

[@lisaguy7650]

What a champ thank you!!!

[@DanielJohnHowTo]

Glad it helped!

[@caroscott3568]

Thankyou Daniel 🧡

[@DanielJohnHowTo]

No worries!

[@lisahart8937]

Excellent! Thank you

[@DanielJohnHowTo]

You are welcome!

[@shaunwilliams934]

Thankyou, that fault was doing my head in

[@namelastname9578]

THANK YOU!

[@billaitchison7209]

Awesome video..Saved my ass thank you

[@DanielJohnHowTo]

No worries, thanks

[@ufcq894]

Bless you good sir!👍🏻

[@DanielJohnHowTo]

Thank you kindly

[@heazleshore9062]

Thanks so much, I found that extremely helpful.

[@richardfalkai2296]

Thank you!

[@witherstorm9332]

Thank you!!

[@alexandrasamara1549]

Thank you so much!!!

[@DanielJohnHowTo]

You're welcome!

[@natalyabaret3714]

Thank you so much

[@kerriswabey2248]

Thanks Daniel

[@MathVanhoof]

Thanks mate 🤘

[@banry1174]

If I clean and wash the filter should I leave it to dry or I can use tumble dryer straight away.

[@LoveMarisaQ]

THANK YOU SO MUCH!!!! I was losing my mind over this error message.

[@dr3857]

Thank you!!!!

[@nevermindoo]

Thank you sooooooo much!

[@DanielJohnHowTo]

You're welcome!

[@adamclark6775]

Thank you.

[@robertdouglas4432]

I have one of these and have generally been pleased with it. I've recently been getting the same error notice but always on small loads. Maybe just a couple of items in the dryer. Large loads, no message. I thought I was keeping the device fairly clean and but it seems to have a pretty low threshold for fluff build up. Also, it wasn't in the video, but when I get this message, the dryer has shut itself off. If I try to begin again, it runs for a couple of minutes and then shuts down again. I called the Miele help line and they had never heard of this error code. I found that to be a little (a lot!) strange. Anyway, will endeavor to keep filters cleaner and hope for the best.

[@DanielJohnHowTo]

I think we might have had the same issue with trying to put not a lot in.

[@karentotaro9649]

I agree it has a low threshold. I have had other Miele dryers and no issues. This one alarm at every 3 goes. It seems a bit excessive.

[@laurauzelac3589]

Exactly, very low threshold. Actually a real pain. Every load the inner filter needs to be clean out and every 3rd load approx. the out filter. Necessarily sensitive. I now wish I hadn't chosen this model.

[@CK-zp8tx]

@@laurauzelac3589 We have the same headache of frequent F66 beeping errors. Is this over-sensitivity considered "normal" operations?

[@mesutdegerli2189]

thanks alot

[@cza8294]

Thanks a lot!

[@DanielJohnHowTo]

You're welcome!

[@sherristark6679]

Thank you

[@DanielJohnHowTo]

You're welcome

[@rosaleenkeating2449]

Thank you I kept getting F66 and didn't know what to do.

[@DanielJohnHowTo]

You're welcome

[@nyctony6733]

Rosaleen, I shared your frustration and have posted a message above that I am 100% sure will rectify your F66 Nightmare Good Luck

[@bakikalanbukubbede]

Danke schön... vielen Dank

[@lucciel_marcheur3670]

Thanks a lot

[@DanielJohnHowTo]

Happy to help

[@mfsmann]

Thanks

[@Cikeb]

I've tried that. Sometimes it works, sometimes it doesn't. I've heard the error can also occur if the room is too damp. That error is simply a mystery sometimes.

[@DanielJohnHowTo]

since moving the machine to a more bigger room we have had 0 errors, i think your damp room theory is correct.

[@benoitmarconi4993]

Thank you for this video… What a struggle to understand the language of machines… F066… Like if there was an error F001

[@ingevanderzon7386]

you can wash the filter in the washing machine as per instructions in the manual. Short cycle 600 speed 40 degrees.

[@leonard_9500]

If anyone is still experiencing this error after cleaning all the filters, the humidity level around the dryer may be too high or there is not enough space for ventilation around the machine.

[@DanielJohnHowTo]

is it in a small room? we had this problem all the time, but when we moved and it's in a big kitchen the problem never came back.

[@leonard_9500]

@@DanielJohnHowTo The room it's located in is pretty large but the thing that helped was to keep a window open while it's running.

[@EmmaPlanPrettyPlan]

The sponge needs to be dry when you put it back in. Just but it between a towel and squeeze till not water comes out!

[@Tom_pr]

Everybody with a new Miele has this this "problem" it seems. It keeps coming back but I must say I didn't was the sponge cause it looked clean. I will wash it. Hope it helps

[@DanielJohnHowTo]

We moved our dryer into a big kitchen from that small cupboard featured in the video and it's not had the error since so that has to be something.

[@multihobbyscrapbook]

Can you help wit code F004? Greetings from Holland!

[@yeniyeni4066]

Please tell me how to arrange washing time so it's fast

[@sum9192]

just solve this issue for the error 66, thanks!

[@erynkados]

What about after that i am still getting the error and i did a clean.

[@nyctony6733]

Erin, Take a look at the message I posted and I am sure your problem will be a thing of the past Good Luck

[@captnemo75]

👍

[@leslierae2591]

Thank you♥️

[@thomasharmsen6892]

Thanks 🙏🏻

[@DanielJohnHowTo]

You’re welcome 😊

[@Psychdlc66]

TY

[@buggy767]

Same issue here. Brand new unit. 🙄 A bit temperamental

[@shinyori]

Stupid device. I was ready to replace it because I was receiving all the time this error, but I only cleaned the other filters

[@danielbittencourt1345]

Ok KZbin I’ll take suggestion seriously

[@paulawade1446]

Please be aware, these dryers are not programmable. They advertise as having a number of features, but you cannot get through the second step of the instructions. Miele customer service seems aware and unable to help other than sending a technician at my expense. Initially, this dryer was great, but you are paying for a lot of features that you cannot use. I would discourage anyone from purchasing one of these dryers.

[@LabRat6619]

Wrong. Everything cleaned, still beeping

[@DanielJohnHowTo]

any error codes?

[@briandavid7328]

I hate this machine and I am getting rid of it only used it a few times. No time for this BS - it’s a piece of junk. I appreciate your vide but it is still doing it and I don’t want to be bothered. It’s like all other German stuff - overrated garbage.

[@buyachi]

Thanks, it worked!

[@RogeriaOeksendal]

Thank you!

[@KuMo]

Thank you so much!!

[@DanielJohnHowTo]

You're welcome!

[@tonyalindman3048]

Thank you so much!

[@DanielJohnHowTo]

You're welcome!

[@bohhor9774]

Thank you so much

[@DanielJohnHowTo]

You're most welcome

[@asubstantiallife7557]

THANK YOU!!!!

[@DanielJohnHowTo]

You're welcome!

[@vernika84]

Thank you!!

[@DanielJohnHowTo]

Welcome!

[@NevilleBurnell]

Thank you

[@DanielJohnHowTo]

You're welcome