How To Install (RC) Radio Control Systems, Motor, ESC, Servo. Brushed & Brushless

[@ChrisGurin]

I have EXACTLY the same equipment , so you’ve given me a perfect tutorial. The song is now stuck in my brain! Tried to learn banjo once. Less said about those efforts, the better.

[@voiceofshinkairadio3651]

How can i get this equipment in Afghanistan?

[@Laggyvr]

@@voiceofshinkairadio3651amazon

[@aidenkahn4338]

Don't try to bomb​@@voiceofshinkairadio3651

[@evan2587]

With that music he's trying to make rc cows

[@lancelotnet]

çakmağındaki bayrağa kurban senin :)

[@iniu6773]

This was the first helpful video I found

[@metronom_81]

teşekkürler, hemen hemen tüm soruları cevaplamışsın ...şiir gibi geldi yorumları okumak ....

[@richg.2579]

Thank you the manufacturer doesn't show you anything and you are the only video to show how the power hooks to receiver

[@grahamanderson1126]

OMG that is so simple and explains everything. Thanks for sharing mate

[@denizefecan6893]

türkiyede senin gibi bir kanalın olmsınan gurur duyuyorum

[@syedinshaparvez7878]

Sweet, simple and to the point. Thanks a ton mate!

[@TitaniumBaalak]

Very very nice video and this is lot more helpful 🚩🚩🚩👌👌👌👌lots of love from India

[@MarcinWojtczuk]

Complete newbie zero knowledge, but wanting to build rc boat. Thank you for explanation, very useful!

[@livefreeordie5033]

Excellent video, now I have to learn Banjo 👍⚘️ Cheers🎉

[@jackglossop4859]

Came here to learn how to wire up my plane but got into the music so now headed down the ole’ creek to hunt some crawdaddies with the McLennon boys.

[@munthery]

Thank you! I couldn’t find any videos to help understand receiver contractions. This is simple and explains a lot in it.

[@RackwitzG]

This is very helpful. Thanks. I‘m awaiting the same components to build your aerobatic plane and now know exactly how to set it up. Channel 3 is a useful hint and saves me from guessing. 👍🏻

[@goldenfish77]

Awesome! This is what I looking for. Thank you for sharing this video!

[@fonrcscaleconstruction2255]

I like it very much. And will follow you forever

[@FixitEasyDIY]

Thank you for sharing. I am glad I found your channel! Keep up with your good job!

[@ryancollingwood4605]

Awesome video ! im in the process of building a massive rc boat using a 400w trolling motor

[@00000......]

Good bro💪🏻🥰👍🏻⚡. very useful video for beginners

[@muhammadnurhidayattriodi6738]

Very education for me and this free thank teach

[@ahmetoguzhan7122]

Bu adamın videoları hepmi güzel olur be

[@cat-cambodia1801]

Good video view 👍🤗 my friend

[@craftymantamil3283]

Your subtitle is very useful please continue

[@lursu]

Thanks I learned a lot!!!👍👍👍😊😊😊😊 nice video guy! I need that for my own channel

[@amelamanoddin3608]

Amazing video, thumb up

[@EditXflow]

Wallahi süpersiniz Allah razı olsun

[@particulatemini]

Gerekli ve açıklayıcı bir video

[@zachabenz]

Vert good ans clear vidéo. Thank u vert much.

[@babumohan4549]

one of the best video from your's rc institution.thank you so much sir.greetings from indians.

[@gunawanamo4054]

thank you KendinYap .....your tutorial very useful ....bravo

[@cod_liver8384]

thank you Kendin Yap.... this helped mee alot.

[@cemabatay4523]

çok yararlı cidden bu konudaki videolarının devamını beklerim çok saol bilgilerini paylaştığın için

[@Kendin-Yap]

Teşekkürler.

[@ChrisGurin]

Great work as usual. Interesting music, as well: Y'all into Bluegrass?

[@szopanawsi]

great simple video. thanks

[@MasboyRC]

Really nice video, it's so informative to rc builders. Thanks for sharing.

[@sakasaheed1922]

Thanks Kendin Yap, is a nice and educative video. can you try and compress the videos for us next time.

[@hmsaonbapere9715]

এই সব বাংলা দেশে আছে

[@dem1r489]

Abi çok güzel yapıyorsun ama ben yapamıyorum çok zor.Videolarını çok beğeniyorum ellerine sağlık

[@ck_shorts4735]

Thank you 🙏🙏

[@w.j.bendellr.c.flying.1037]

Very Good ⭐️⭐️⭐️⭐️⭐️

[@zulkiflyhjali5142]

Good....👍👍🤗😃

[@creativethinker6064]

what an idea i like it keep it up! ❤

[@wobbuffetgaming]

You are the best

[@denismoran670]

Brilliant as usual, Kendin - I am puzzled - NO binding plug used ?I am having trouble setting up a brushed speed controller to a power train, using an Fs-i6. Hope you are all safe, Den, Wales

[@shinyivin5119]

Yeees exactly what I need thx bro

[@oiuyouitouyt8]

Very good video ! Btw im curious what kind of gadget u use fr soldering pad ? Whats is the name of it ? Thank you !

[@somalia1142]

Thanks my teacher

[@capnhardway]

Thank you for your informative videos. What do you do if there is no screen on the original equipment?

[@rishithbhaumik8817]

Hey Kendin Yap love ur videos, but one thing that keeps me puzzled is what is that language in titles

[@BasuHome-q4e]

Turkish

[@mosharrafhossain4093]

This video is very much useful for me.Liked the video.Thank u very much for uploading this video.

[@3dmodelinghamid238]

Super 👌

[@owlbruno]

Tolles Video 👍 Thx

[@ОлексійОлексійовичКоваленко]

Super!Teshakyr ederem!

[@informatika7725]

Super Video Yeni videolar bekleriz 10 numara 5 yildiz

[@albertomacchi1915]

thanks, I've been looking for months for a video that explained all these concepts to you. thank you. could you maybe put the ling in the description of some products? for example of the p51-d mustang rc. Hiiiiii!!!

[@albertomacchi1915]

sorry i didn't see the link

[@albertomacchi1915]

I recommend you a rc plane that I have always loved. I hope it beats you. It is the f86 saber rc. hiiiiiiiii.

[@albertomacchi1915]

look I pay you for this video !!!😂😂😂😂

[@두부두비-m4h]

hello! Do you know how to bind a microzone E6R-E receiver on a TX16S?

[@Kendin-Yap]

In the Model Setup/ internal RF / Mode menu, you can select Futaba for the S-FHSS protocol and try it. I'm not sure but it might work.

[@두부두비-m4h]

@@Kendin-Yap I will give it try. thsnk you for answer! 고마워요~

[@The-Gemini]

wow i love it

[@paranormalawakening]

Was very helpful wish you did audio of you or a ai talking so we can understand more during what it is your doing

[@Kendin-Yap]

I uploaded this video in 2018. Of course, voice acting with artificial intelligence was not possible in 2018. :) I think this video, the link of which I shared, is much more understandable for beginners. kzbin.info/www/bejne/sJeUlqiaZbGFgcU I may consider making an audio video translated with artificial intelligence in the near future.

[@DMANUYDV]

Which transmitter is better Fsi6 or Fsi6X PLEASE REPLY 🙏 WHAT ABOUT THE RANGE OF BOTH TRANSMITTER??????

[@Kendin-Yap]

The i6X is a newer version. 10 channel firmware installed. There are no significant differences between the two. The control distance are the same.

[@kevinvadagnin7774]

😀👍grazie ciao

[@PixelZYX]

Thank you sooo much

[@peruccaeditz]

Thanks,I will get this radio,what operatable range do you get or what estimated range do you get ?thanks😊

[@Kendin-Yap]

about 600-800 metrers

[@peruccaeditz]

@@Kendin-Yap Thanks for the reply,did you do a range test or you just said that based on your experience,and would I get that range without any modifications to the Radio's hardware?😄

[@TheRayManOfficiall]

Çok teşekkürler yardımcı oldun

[@Kendin-Yap]

Bağlantılar için bu videom da faydalı olabilir. kzbin.info/www/bejne/g4jCmJqan9BraZY

[@michaelshansen7070]

Well done!

[@charlesklein7232]

is a 30A better then a 20A ESC? if you dont need the power is their any reason to get it? or are their times when for a few seconds you might need it?

[@Kendin-Yap]

The ESC selection is related to the needs of the engine. You should know the technical information about the motor's current and voltage and choose the appropriate ESC accordingly. Example: If the maximum continuous current value of the motor is 15A, 18 or 20A ESC is appropriate. Current capacity of ESC should be slightly higher. This ensures continuity of operation in sudden stresses and protects the ESC. It is not beneficial if the current strength of the ESC is too high, but it is not harmful too.

[@adityapalpal5926]

Sir Bina ESC se motor run karega

[@valtearalte0657]

can the brushed ESC and motor be used for rock crawlers, for moving slow on terrains? i mean can the speed be controlled?

[@Kendin-Yap]

Yes it can be used. It is usual to use brushed motor and ESC in Crawler type off-road vehicles.

[@valtearalte0657]

@@Kendin-Yap but can it go really slow but with powerful torque ?

[@Kendin-Yap]

@@valtearalte0657 Gearbox is required for slowness and torque. This is related to the gear ratios of your vehicle.

[@christopherbousquet-jette117]

Hi, Can we use 2 dc brosch motor with channel 1 and 2 rather than with only the trottle channel 3 and one dc motor ?

[@Kendin-Yap]

yes you can

[@royd7984]

The first connection to the receiver is marked PPM. What is that used for? This my first plane, and I'm using Flysky RX, ESC and Receiver (IA6B). Thanks for your video. Hope you will answer my question about PPM connection. Also, what is SENS? It looks like most inputs are IBUS. Appreciate any help.

[@Kendin-Yap]

If you are not going to use a drone controller or an autopilot system with S-Bus support, you should use the traditional connection PWM outputs. (CH1, CH2, CH3 etc.) This is the case for model aircraft. S-bus provides connection over a single cable but is not suitable for model aircraft. Not applicable for S-Bus and PPM model aircraft.

[@remcoe6757]

Is het mogelijk om op de rechter stick te mengen zodat je bij het gebruik van een boot ook achteruit kan varen?

[@abdullahaktas9829]

Hocam elinize sağlık esc yi aradan çıkarsak batarya ve alıcı ile servo motor calisirmi

[@Kendin-Yap]

Evet. ESC motor için gereklidir sadece. Direk 5 veya 6 voltluk bir batarya ile kumanda sistemi çalışır.

[@rafcomtech]

dear sir, please make video about RC Volantex Exmitter EX7 thanks

[@okandeniz3454]

Merhaba, Tr de takip ettiğim sayılı insanlardansınız. DIY alanında umarıum iyi yerlere gelirsiniz. Sizden ricam kullandığınız ürünleri bulabileceğimiz güvenilir ve uygun fiyatlarını link olarak video açıklamasına ekleyebilirseniz. Giriş seviyesindeki bizler için çok yararlı olacağını düşünüyorum. Keep up !!

[@babek7939]

Teshekkurler! 12v-24v fircali 775 icin hangi alici ve ESC tavsiye ederrsiniz ?

[@Kendin-Yap]

Kumanda ve alıcılar genel amaçlıdır. Motora göre tercih yapılmasına gerek yoktur. ESC motora göre alınmalıdır. 24V fırçalı ESC bulmak biraz zor. 12V fırçalı bir çok çeşit bulunabilir. Kullanacağınız yere göre çift yönlü veya tek yönlü olabilir. ESC nin akım gücü motorun çektiği akımdan fazla olmalı. 775 motorların farklı güçte olanları olduğu için kaç amper çektiğini bilemiyorum. Teknik özelliklerine bakmalısınız. Eğer motor 15 amper çekiyorsa ESC en az 20-25 amper olmalı.

[@babek7939]

KendinYap ✊✊

[@johnpackham7417]

Can you set up a servo and a receiver without the motor connected to the ESC

[@Kendin-Yap]

This is simple. You can use the receiver with an external battery. No need for ESC. A 5-6v battery is suitable.

[@johnpackham7417]

@@Kendin-Yap thankyou for the fast response. I will be sure to take that into account

[@leonid1558]

Is there a problem if I have to use a brushless motor with a voltage of 11.1 V? Is it enough just to replace the battery and ESC? Thanks .

[@Kendin-Yap]

No problem with 3S (11.1V) ESC, 3S battery and 3S supporting motor.

[@leonid1558]

@@Kendin-Yap Thank you for info.Regards.

[@leonid1558]

Btw, power supply to rx must be 4-8.4 volts ?

[@gabrielrezende3394]

Where can I find the plugs to soldering? Tnks =)

[@Kendin-Yap]

There are links to the materials below my videos on RC airplane construction.

[@chinnenhon99571]

What motor and Esc are there? I will like to order them. Tq

[@Kendin-Yap]

kzbin.info/www/bejne/jaTJfImQZ7iGf80 - It's the same equipment I used in this video. There are related links below the video.

[@uday9412]

What a video and background music

[@GOOD-ss1dq]

Can i use any type of eachine for the view of live video . REPLY BCOZ I HAVE WRITTEN WITH HOPE

[@Kendin-Yap]

I could not fully understand the question.

[@GOOD-ss1dq]

@@Kendin-Yap What is the best EACHINE with good antenna's NAME for "MATEK Systems VTX-1G3-9 1.2Ghz 1.3Ghz 9CH" a long range video transmitter.REPLY BCOZ I HAVE WRITTEN HERE WITH HOPE..

[@EMIRFPV]

Abi o esc yerine herhangi bir 30a fırçasız esc kullansam olurmu ucuzlardan; Çok ısınırmı

[@Kendin-Yap]

ESC kullanacağın motora göre seçmen gereken bir şey. Fırçalı motor için fırçalı, fırçasız motor için fırçasız ESC olmalı ve motorun akım tüketimine uygun olmalı.

[@LCMNUNES1962]

BRASIL OK VERY GOOD

[@shinley8468]

mrb her motor için ayrı ayrı pilmi takıcaz birde 27mhz teknemi bu kumandaya donusturebilirmiyim teknemin kendi motorlarını kullanıcam 12 volt motorlar

[@Kendin-Yap]

Her motor için ayrı pil gerekmez. Paralel bağlantı ile tek pil kullanılabilir. Bu kumandayla her türlü modeli kullanabilirsin. Motorlar için uygun ESC olması şartıyla..

[@Chennaijohn]

How to connect the small receiver pls tell me

[@SanthoshSanthosh-sx6gp]

Can we bind the receiver to the mobile. We can control with the mobile.they have any app application.?

[@impxrobin]

I love this music

[@santhoshsanthosh-vl1um]

Bro can we connect brused and brushless moter at a time to reciver with two (ESC)s If we can pls make a vedio

[@Kendin-Yap]

Yes it can be connected. You can connect the brushed ESC to one channel and the brushless one to a different channel. Or you can connect it to the same channel with a Y type extension cable. The control system cannot distinguish whether the ESC is brushed or Brushless. Both of them work with the same signal logic.

[@santhoshsanthosh-vl1um]

Bro my daubt is that two brushless moters can connect to two channels with two speed controllers

[@santhoshsanthosh-vl1um]

Because iam making a rc dump truck

[@santhoshsanthosh-vl1um]

Please help me

[@santhoshsanthosh-vl1um]

Why don't you give reply

[@mahtomani]

Hello kendinyap how can I connect two or more brushless motor to one battery

[@Kendin-Yap]

You can make an adapter cable to connect the battery inputs of the ESCs in parallel or you can get a ready one.

[@heyyouyayou7933]

that was great

[@akshaykk5092]

how to connect throttle front and back both? in brushed motor

[@Luca-pg5mj]

but in motors with brushed brushes brushed brushes do brushes wear out? That is, if the charcoal is consumed the engine is to be thrown away? 🙄

[@ratsaround4642]

Can I put the DC motor on another channel so that it rotates (clockwise and counterclockwise)?

[@Kendin-Yap]

Yes it is possible

[@vietdragon5610]

how do you set the radio setup to get full speed on tharot

[@ajw6715]

What is the max distance the transmitter can be from the receiver?

[@Kendin-Yap]

1500 meters

[@vannenrchydraulickh1314]

Can it use with 60a brushless esc sir?

[@Kendin-Yap]

Yes you can

[@vannenrchydraulickh1314]

I want to use it with 4050 brushless motor and 60 A esc can it work with this radio controll sir?

[@musaeminozdemir445]

Çok güzel bir video abi eline sağlık, bu devre kaç tl ye mâl oldu sana bilgi verebilir misin?

[@justinelaceup7553]

Hi new fan all d way from the Philippines. I have a question my reciever has only 2 pin which is for brushed motor but i accidentally brought a brushless and esc. the esc now is keep on beeping idk what to do because i just dont know how am i gonna put 3 pin ESC to a 2 pin RECIEVER?

[@MrHotjag]

buy a new receiver what brand you use

[@babahamza2722]

Hocam sizin önerebileceğiniz servo motor siteleri var mı şu an dolardan dolayı fiyatlar çok yüksek

[@Kendin-Yap]

Dolar dan kaynaklı fiyatların yüksek olması ne yazık ki tüm siteler için geçerli. Çin sitelerin de dahi bolar üzerinden satılıyor veya günlük dolar kurundan TL olarak gösteriliyor.

[@mesutdemirel3291]

Siteden verici kumanda ve alıcı yi aldığımızda hiçbir programa gerek kalmadan sizin baglasiginiz gibi bağlasam yön ve motor lar.calisir mi ,? Yada programla mi ayarlanması gerekiyor

[@Kendin-Yap]

Kumandalarda programlama yapılmaz. Basit ayarlar yapılır sadece. Menüsüne biraz alışmak gerekebilir.

[@facanhas123]

Could you send a purchase link for this control and parts? Because I want to make this control plane my circuit

[@Kendin-Yap]

You can check my RC airplane videos. There are links in the description box below those videos.