How to install Winch Mount and Winch on Honda Talon 1000

In this video we show you how to install a Black Op Series winch onto a Honda Talon.
It's never a bad idea to get a winch installed on your machine. They can come in handy more times then not, especially if you are one to ride alone at times. SuperATV offers a legit winch mount that allows you to install a 4500lb winch onto your Honda Talon 1000.
Get your winch mount today!:
www.superatv.com/honda-talon-...
Check out our full line of winches:
www.superatv.com/search?q=winch
#SuperATV #BlackOpWinch #WinchInstall
00:00 Intro
00:05 Tools List
00:15 Remove the Bumper
01:28 Drill Holes for the Bracket
03:29 Install the Fairlead Plate
04:13 Install the Winch Mounting Plate
05:24 Run the Winch Rope through the Fairlead
06:32 Install the Clevis Hook
07:37 Remove the Hood
09:08 Drill Holes for the Solenoid
10:43 Identify Your Wires
12:17 Expose the Battery
13:45 Replace the Battery Box Cover
14:50 Run Your Wires
16:11 Make Connections on the Solenoid
17:50 Pull Coverings Over Connections
19:23 Wire Your Power Source
20:13 Install the Rocker Switch Panel
21:45 Feed the Harness Through
23:06 Tidy Up and Test Your Winch

[@tinkertrek]

Best install video of anything I’ve ever seen.

[@SuperATVMedia]

Thanks for the feedback!

[@DIYGANG]

Hey man what pin size did you use for the dummy plug?

[@tomnutt6022]

My setup is basically the same but I wish I'd gotten the winch bumper that allows you to get the winch up higher on the machine keeping it up outta the mud a bit more.

[@doc559]

Thanks for sharing 🏆🏆🏆🤗🙏

[@jessepleggenkuhle4388]

Great Video, very easy to follow along! The only issue I had was one of the tube clamps didn't fit. I needed to grind off the inside weld then repaint. I also am not using a rocker switch, I stuffed it in the glove compartment since I plan to use the remote. Ever time I use a winch, I need to be outside controlling the winch cable, so, I'm super excited to use the remote.

[@SuperATVMedia]

You will still need to connect the wiring for the in-cab switch in order for the remote to work.

[@tom73055]

You should as a safety measure DISCONNECT THE BATTERY TERMINAL FROM THE POSITIVE SIDE OF THE BATTERY BEFORE DOING ANY ELECTRICAL CONNECTIONS

[@cerwin21]

Using you superatv hitch to weld on a rear winch mount.

[@tom73055]

Looks like you have a different machine now .did you install them new mud tires while i was on vacation? Great video ,thanks

[@tom73055]

ARE THE POWER WIRES FROM THE BATTERY TO THE WINCH SOLENOID THERE FROM THE FACTORY? OR DID YOU RUN THE POWER WIRES PRIOR TO THE VIDEO?

[@iowncrystal5887]

factory

[@King_Henry_V]

Where did you get the brackets you drilled the wholes for??

[@PremiumFilmz.]

Need to take the music out of this video

[@joanrodriguez5848]

When are we going to see a video of an ATV not a Utv?