How to Remove Seat Belt Pretensioner Sensor Plug | MyAirbags

[@richardpowell1923]

Thanks for taking the time to show this. It was exactly what I was looking for 👍

[@MyAirbags]

Very happy to hear that! Let us know if you like to see anything else in our next video

[@Al-tj6ms]

Great channel, do you have any advice on a "Airbag(s) or seat belt(s) pretensioner fault" alert on Citroen C3 Aircross 2 (2017). We have had this ~10 times on the road, but no ODB code is retained!

[@MyAirbags]

Check out the MyAirbags Community Forum. It's a great resource to ask and answer questions! forum.myairbags.com/

[@drabdoo89]

How much is the capacity of resistance located in the seat belt of Mercedes s350 2010

[@MyAirbags]

For a good seat belt, it is between 2 - 3 OHMs

[@stillslowmiata]

Thank you! One additional question, does it matter which wire is 12v and which is ground? If so how can you tell which is which.

[@MyAirbags]

No it does not matter what wire

[@rbe3908]

Enjoyed this video, I am trying to find info on properly removing yellow connector on my 03 miata seatbelt, any help appreciated.

[@MyAirbags]

Please post a picture of your connector at forum.myairbags.com

[@MyAirbags]

See this video: kzbin.info/www/bejne/qmmzepqpfqiCgtE

[@TheMervK]

Thanks buddy!

[@MyAirbags]

Glad to help! 😊

[@noelm2856]

Thank you saved me few hours 🙏

[@MyAirbags]

You're welcome!

[@DurisAlligumo]

Hi. Could you explain what’s the function of the plug? I bought a seatbelt of the same model but different year and it doesn’t fit. What issues could I encounter?

[@MyAirbags]

The plug is the electrical connection to the airbag control module. When the vehicle is in an accident, it sends a signal to pretension seat belts to activate. Original seat belts can be repaired at myairbags.com

[@shark70007000]

Well, mine doesn't look like any of those. 🙁 Well, I figured it out now. Thanks for the tips.

[@geralddilibe8402]

How can I get one for Nissan Rogue 2008? I really need one. Please I would like to hear your reply

[@MyAirbags]

Check here www.myairbags.com/product-category/parts-in-stock-ready-to-ship/airbag-seat-belt-plugs/

[@buzzin5868]

Can you do a 2020 Malibu

[@MyAirbags]

Yes, we can do Chevy Malibu 2020 plugs. Also, the airbag control module and seat belt pretensioners.

[@buzzin5868]

@@MyAirbags I have been looking for a video of how to remove that plastic part so I can put a new 1 to connect to the wire

[@rantzzzrantzzz2568]

Do i need to disconnect the battery before including the sensor while still attached to the car?

[@MyAirbags]

Its always best to disconnect the battery when working on SRS system.

[@MyAirbags]

For proper repair, OEM parts need to be used. See this video to know if the seat belt was repaired correctly: kzbin.info/www/bejne/baTOdId9q8SahK8

[@phajeb001]

Where can I buy the prongs for the male connector?

[@MyAirbags]

myairbags.com

[@robertbritton9865]

Can you make a video in how to remove the airbag light in a Toyota Highlander Hybrid (2021)? Of course after taking care of the problem. My case was about replacing airbag and producing Open in D Squib (Dual Stage - 2nd Step) Circuit B1811.

[@MyAirbags]

For Toyota vehicles it is easy, if the vehicle was not in an accident and the airbag control module is good, then as soon as you fix the code that you are getting, in your case is seat belt pretensioner code, the airbag light will turn off next time you start your vehicle or turn ignition on.

[@MyAirbags]

So if your vehicle was not in an accident and the light came on one day and you get tge system scanned to see what the DTC codes are and for example its a bad seat belt or connection problem. After you fix that problem, the light will turn off without doing anything additional. This works like that with most Toyota, Ford, Chevy, Buick, Cadillac and GMC vehicles.

[@robertbritton9865]

My car was in an accident, I believe we fixed the issues, question, we always need to replace the module? And second, if the answer is yes, why the Toyota dealer didn’t find the problem with the module? Thanks

[@MyAirbags]

Yes when vehicle is in an accident it will have crash history, also known as crash data. The airbag control module needs to be replaced or crash history needs to be reset to use the same airbag control module. For Toyota vehicles it is a little tricky because not always it will show crash codes. For these vehicles, you will have NO fault codes for srs airbag, but the airbag light will still be on. That is how you will know the airbag module has crash codes. For other vehicles like GM, Ford, BMW you will actually have a DTC code that says crash history data is full. For rebuilders that deal with Toyota, and after you do a few rebuilds you will quickly figure this out that if your vehicle was in an accident and you have no codes and light still stays on, then the airbag control module needs to be reset.

[@robertbritton9865]

@@MyAirbags thanks, I just wonder why the Toyota dealer was not able to detect the module issue. Are you sure that the problem is not a pretensioner sensor?

[@youdagoob]

Amazingly helpful! Thanks!

[@MyAirbags]

Glad it was helpful!

[@Ilikewater43]

Thanks for the help!!!

[@MyAirbags]

Happy to help!

[@Sam-sd6qy]

Thanks heaps for your video

[@MyAirbags]

Happy to help

[@trollrock8517]

Ok! If you didn't watch this movie and need to buy the one marked American and European cars - where can you buy the connector?

[@MyAirbags]

The plugs can be purchased here www.myairbags.com/product-category/parts-in-stock-ready-to-ship/airbag-seat-belt-plugs/

[@trollrock8517]

@@MyAirbags thank you but I live in Norway . do you have International shipping?

[@wayne-dh4pt]

thanks

[@MyAirbags]

You're welcome!

[@robertbritton9865]

Thanks, right to the point

[@MyAirbags]

Thank you!

[@Aljoker313]

I want know about passenger seat belt tention sensor Where’s position?

[@MyAirbags]

That is in the seat belt itself on front passenger side

[@nexpro6985]

None of these match the ones on my Ford.

[@MyAirbags]

What is the year and model of your Ford?

[@wiki-leak]

why did you delete my comment

[@MyAirbags]

No comment deleted. Maybe different video? What question do you have?

[@MyAirbags]

For proper repair, OEM parts need to be used. See this video to know if the seat belt was repaired correctly: kzbin.info/www/bejne/baTOdId9q8SahK8