How to reprogram code (reset pin) on your Genie Intellicode garage door opener keypad.

[@TheEpicChonnom]

Your video is the only one out of freaking 7-8 of em I watched that worked!!!! Knowing that other genie keypad reset videos weren’t the same keypad model/generation until I found your video sir! Thank you very much for saving me from suffering last 2-3 days! 😅

[@danelmore1]

Please let the company know you have a better video … not 13 minutes … and it works! Thanks.

[@wb7052]

Thank you! So tired of having to watch how to videos with 10 mins of nonsense filler. Thank you for getting right to the point. My wife and I reset our code in one try after watching your video.

[@gailmanganaro8286]

Same thing for me, this was the most concise video and it worked 👍

[@locohobo1925]

It was that 6 in the ‘prog-6-up/down’ reset code that was the magic key. Your video is the only one I found that provides that. Even with the exact same remote, their instructions didn’t work. I am truly grateful... as are my neighbours, now that the swearing and screaming has stopped. 🤬 I am very thankful that you took the time to make this video. 🙂

[@bethteixeira5696]

This is the only video that actually fixed my garage door! Thank you, Matt!

[@skyzm]

This is the only fuckin video that worked. These products and their support absolutely suck if so many people are having a hard time figuring out how to do this. Good luck finding a manual online with the right instructions. Anyways, thanks!

[@williamkite3275]

I had looked at a lot of videos and this one is the best. The instructions on the keypad were not correct. Thanks for your video!!!!

[@MontyBird45]

Excellent. I wasted over an hour following instructions from a factory manual that were incorrect. I did what you said and it worked the first time. Bravo! And Thank you!

[@Cat_Attack]

This worked perfectly on my older Genie remote first time I tried. Too bad I wasted two hours getting very frustrated with Genie manual online but your easy step by step saved my Sunday and probably the remote from a ten LB sledge hammer, hahaha. 😹

[@seanchin]

Hey, when I did this, it made my remote in the car stop working!! How do I fix that back??

[@Cat_Attack]

@@seanchin As much as it’s a big pain, I had to reprogram each remote back with the garage door opener. Your car’s owners manual should have instructions on how to program the cars remote to the garage door opener. They did not make any of these easy to keep running when the batteries due on the motes. Good luck. 😺

[@wtflip7278]

I don’t really comment on things, but out of six videos, yours was the only one to work! Key was to ensure the correct keypad reprogram. Including the “6” on reset solved everything from there forward. Thanks man!

[@Listen2MattLawrence]

Glad it worked!

[@kennygee6627]

Thank you!!! I owe you a beer, seriously! My door has been screwed up for several months and I’ve tried many times and watched many KZbin videos that all produce the same result, failure. Yours worked perfectly, thank you, thank you, thank you! I wish youtube would give us an option to give you more thumbs up 👍🏽👍🏽

[@Listen2MattLawrence]

Kenny Gee, I’m glad it worked! And I’m partial to malty brown ales and stouts. None of that IPA crap. 🍺🍺🍺😁

[@MikeDelcambre]

Worked perfectly !! One note to viewers, initially I could not get this to work and discovered my LEARN button didn't work! MAKE SURE the LED lights up when you press the learn button. It is very fragile and can damaged easily by pushing too hard. I was able to open the unit and jumper the switch but i dont recommend trying that if you do not have electrical experience. Thanks!

[@donhancock9007]

Thank you for posting this. When we bought our home 4 years ago... I tried and tried to get it work... this made it successful!

[@lemonsongii]

I couldn't find anything to actually help me, until this. Thank you so much. I'm a nurse that needs to come in through the garage to keep the stuff that comes in on my shoes and scrubs out of my house...you made that possible. Thank you so much for putting this up.

[@Listen2MattLawrence]

Well you just made my day. Thank you for everything you do. So glad I could help in some small way.

[@lemonsongii]

@@Listen2MattLawrence it was huge to me. I'm a bit embarrassed to say I was close to tears just wanting my rotten garage door to work so I can do what I can, and I found you. You made my day also. Thank you so much.

[@jules3135]

BEST VIDEO TO REPROGRAM THAT IVE WATCHED SO FAR 😁😁😁😁

[@miguelreyes98]

Totally worked! The instructions on my keypad cover did not say anything about pressing “prog + 6 + up/down” at the beginning but I did it anyway and it works fine. Thanks for sharing 🙏🏼

[@ЖекаМахаринец]

Same crap, thank you for helping

[@MicahManago]

That beginning code was the missing key 🔑 Program + 6 + up/down! Big thanks my man!

[@bobscaglione635]

Wow, I've had this opener for 15 years and it never worked until now, well done!

[@MsShyla222]

Omg! after 2 days and numerous videos you are the ONLY one who got this to work. Appreciate it!!

[@Listen2MattLawrence]

Glad it worked!

[@kashaft]

Great video my man.... Made it much clearer than a couple other videos I've seen

[@steveramos2060]

Best video out there about programming these Damn things. I tried the owners manual for an hour before I found this video that got it right in 5 minutes. Your the man for posting this!

[@sandrajohnson1126]

I agree with Matt...very detailed. After calling the number on the keypad, I waited over an hour for assistance. Then I went online to chat with a representative, which was of no help. This gentleman went through the process, I took abbreviated notes to help as I went through the process. It works great. THANK YOU ! !

[@TGrant]

Watched several other videos which apparently had errors. This is the only one I found which yielded success. I think that the note to wait until the keypad back-light extinguishes is a critical step. Thank you.

[@nyotz2767]

I can't tell you how many videos I watched trying to do this! That last little tip about waiting helped tremendously. Thank you so much!

[@rntws5729]

This is the correct way. Watched 4 other videos that didn’t work. You had it 100%.

[@msatnemra]

this is literally the best video online I could find, now I cant wait to get off work so I can go home and try resetting mine foreal this time lol thanks!

[@juancejas1]

I looked 20 videos without results till i finded your, thanks sooo much for your help!!!

[@MuhammadSaqibcpe06]

Thank you. It’s the only Video that helped reset my Garage opener.

[@Calooseeus]

Very good video, I was able to program mine using this method. It didn't work for me the first couple times I tried, so just 1 suggestion for anyone doing this and it's not working: After the initial steps of clearing the keypad and putting the new code in (BEFORE HITTING THE LEARN CODE BUTTON) wait for the back light on the keypad to go out also. In the video, he mentions that, but it seems like you only have to wait for it to go out before the final step of testing the keypad. I was following the video and the learn code light on my opener wasn't becoming a solid red when I typed the code in. So I went to try it again, waited for the backlight to go out before hitting the learn code button on my opener, and it worked. Thanks!

[@brentaronson3843]

This was the 5th or 6th video on this I watched. Finally someone got it right. Thank You!

[@unspared]

This was such a pain in the ass, thank you for this video! Even the written instructions dont make it clear enough about resetting and programming the code.

[@chrismims3327]

Great job. I've been working on this for weeks. Watched this video and I can finally use my key pad. Thanks

[@josephlatona24]

OMG!!! I've watched 5 other videos and didnt help at all. THIS FINALLY WORKED!!!!! BTW, loved the surf board!!!

[@Listen2MattLawrence]

Haha thanks! My brother used to make them and I had him make that one as a present for my wife.

[@cindzz47]

Oh my gosh👏👏👏👏👏 I watched 10 damn videos on how to program this and yours was the ONLY one that worked👏👏👏 THANK YOU

[@zachallencaskey]

Wow can’t believe this worked, I have on an off tried different things for 5 years no luck, no we’re about to finally get ready to sell our house and I figured this out

[@chelseyhiggins5183]

Seriously! I watched a few others and you are definitely the best! The timing was crucial and you nailed it! Thx

[@Listen2MattLawrence]

Thanks, Chelsey! This video was created purely out of frustration with all the others.

[@mikehankins6799]

thank you ... my dad was having a hard time changing code after his sister passed away (family selling home) and I found this video first thing and helped my dad with resetting code to outside code box (with your help). Thank you again for your time and help !!!

[@Listen2MattLawrence]

Glad it was helpful, Mike. Sorry for your loss.

[@johnphillips5155]

THANK YOU!!!!! This is the fifth video I've watched and the first one to actually get it right. You are awesome!!!!

[@Listen2MattLawrence]

Haha I know the feeling. Glad I could help!

[@lorenzomesiti139]

Best video to help reset your keypad. Fantastic.

[@cindyh425]

The only video we found that actually worked!!! Thank you!

[@saywhatsaywhat]

YOU ABSOLUTELY ROCK! 💯 👌🏽 DH & I tried to reprogram our garage for maybe a total of like 3 hours of the course of multiple tries. I found your video last night and.....FINALLY SUCCESS! Thank you...Thank you.. Thank you!

[@marcodevries4481]

Wow Genie made this unnecessarily complex. Very helpful video

[@captainderps1294]

Thanks for the explanation all the other clowns on KZbin were doing too much you went straight to the point thanks man 👍

[@micray143]

Hey that was awesome I just bought a house with a garage door opener and the former owner said that we would have to call the garage door company but thank you so much it was easy

[@deirdremullaly250]

Yay! Excellent instructions, especially the waiting for the keypad light to go off at the end! Thank you

[@remie584]

This was so helpful, and I was able to even do it in real time! Thanks so much!!!!!!!

[@jamesivan2877]

Way better instructions than what came with the garage door opener! lol Good job.

[@lovincash]

Finally! I came across a video that actually works !! Thanks a million !!!

[@JoshuaNelsonOfficial]

Perfect video. Straight to the point with clear directions.

[@Listen2MattLawrence]

Thank you, Sir!

[@davidg2166]

You are the man. Great video and only one that actually worked

[@dinokatsiris6344]

Thank you! Watched 5 videos and yours was the only one that worked.

[@travisreep]

Man, I have been trying to figure this out for months!!!! Thank you so much!!!!

[@DougKnowles76]

Huge help! I couldn't find reset instructions for this older remote on Genie's support pages. This got me through it.

[@cassiehooper8719]

Super helpful!! The Genie assistant said I needed to get a new keypad because their instructions didn’t work but this totally worked first try! I knew it was a model difference thing… anyway thanks!

[@omarcuellar6471]

Out of all the videos this one worked

[@ruiwu3604]

That last 30second shit , spend me half hour to finger out the heck is that ! Thanks

[@troymclean9301]

Perfect! That did the trick! Thanks for pointing out to wait for the LED light!

[@robynbrown9084]

9/14/22. You the man! Me amd my sister got a really old one of these working with your help!

[@timblack6422]

Extremely useful!! Thank you! Worked the first time!

[@cameronh4472]

Thank you very much sir. Gentleman and a scholar.

[@brianstiles4735]

Dude is legit worked like a charm

[@saifal-haddad6334]

Thank you so much, very easy to follow and got it done.

[@azariahs.korntoe6790]

Thanks bro, it works. I give you a five star ⭐️

[@artmartinez1237]

Thank you so much! It helped tremendously! You should be working for Genie!

[@Listen2MattLawrence]

No thanks! :)

[@bwisler100]

Thank you. Exactly what was needed. Perfect instructions.

[@christianosilva6759]

Finally a video that really helped me!! Thank you brother

[@Listen2MattLawrence]

You’re welcome!

[@Sarahxxxxxxx]

I can’t thank you enough for this video! I was going crazy trying to figure this out on our rental home

[@davidthomas6241]

Outstanding video! Easy to follow and accurate.

[@Luckybeach19]

Finally worked! I think the clear code thing was key. Thx!

[@rakaiser7331]

Okay, why do all the other videos make it seem so hard? Good job Matt!

[@Listen2MattLawrence]

Haha that's why I made this! Thanks, man.

[@6.7cliff38]

Only video that works for me thank you!

[@Boundlessness]

Thanks very much, my moms not tech savvy and went through a nasty breakup and needed this change.

[@yourchampion1]

i really appreciate this video! easy to understand and EXACTLY what i needed!!

[@bobbyschlitt83]

Thank you so much for this video, you made our day!!! 💕💯 It worked!!!

[@Listen2MattLawrence]

Bobby Schlitt that’s great! Glad it worked out for you.

[@eddedecot]

Saved me! Thank you for posting this!

[@prebaned]

Oldie but a goodie. Just a reminder for all fustrated with this. You must follow the video exactly for it to work. I missed the first part precisely. He said hold down Program button, 6 button and up/down button. However i took it as hold down all three. Not the case. Do exactly as he did. Program button, Then while still holding the Program button, press and hokd the #6 button, Then wile still holding the Program and #6 button, press and hold the up/down key. It makes a difference.

[@colleendavis4225]

Spot on! Super easy! Thank you! Thank you!

[@alka7501]

Thank you for your video! It helped me to reset my wall opener! So simple!

[@immrsscott]

You are awesome. This finally worked for me thanks to you. 👏🏽👏🏽👏🏽👏🏽

[@scottb7444]

Thanks,finally got it working,good video short and to the point.

[@russellhayes4494]

Great video and very easy to follow along.

[@hupomeno9035]

Not all heros wear capes...thanks bro

[@donkeyrokman]

Thanks for the help! It worked!

[@GT-us8vc]

Reminds me of a riddle I used to play in the 1980's

[@jeffstone2585]

Good explanation. Genie didn’t make this easy, I’ll say that!

[@uncannyrecovery3980]

Literally cannot thank you enough!!!!!!

[@glennschwartz989]

Saved the day, thank you so much!

[@rph3144]

EXECELLENT !! Thanks so much. Worked great

[@binhluu9823]

Thank you so much!! I made it!😅

[@DresRacingChannel]

this is awesome NOW I WOULD LIKE TO KNOW HOW TO PROGRAM IT TO my big and small garage door.

[@Hi-zu6dq]

Thanks helped worked like a charm 😊

[@vincemussurici6878]

Thanks. Your the man!

[@drok17games]

Worked for me, thanks so much!

[@MsCanada00]

Awesome short and simple tutorial thanks

[@DJ_ames]

Thank you much! This video did the trick.

[@iand8548]

Good video. Just an FYI: Reprogrammed (in Dec 2020) mine as per instruction manual - said to hold down Program and Up/Down button for 5 seconds. That reset my unit to factory default.

[@ismaelrios9259]

Great vid. Worked first try. Thank u

[@IdiealotPSN]

Worked on the first try! Thank You!

[@larrymonaghan7318]

Waiting for the backlight to go off is huge. lol. Thanks

[@osmanbautista1029]

Your video worked for me. Thank you!!!