How to Tune with an Apexi AFC NEO

[@PianoFan2011]

Buenos dias. Una consulta. Mi mecanico hizo el ajuste con el apexi neo porque mi carro es modificado. Pero a los 25min de estar rodando, el carro pierde potencia. Este sintoma es posible por una mala mezcla o ajuste del Apexi afc? Muchas gracias.

[@PianoFan2011]

Good morning. A query. My mechanic made the adjustment with the apexi neo because my car is modified. But after 25 minutes of rolling, the car loses power. Is this symptom possible due to a poor mixture or adjustment of the Apexi afc? Thank you so much.

[@DriveTuneMedia]

The Neo tune wont change over time. If the car's ECU is still using the factory lambda signal that could cause a problem.

[@Alex_Bket]

Very helpful can you increse max rpm with that

[@carlosreyes6448]

yes thanks I was able to figure it out I had to wire up my analog to get voltage from maf

[@stevenfrank344]

This video was super helpful. I thought tuning the NEO would be more difficult. I see you are using the LM2. I have a Glow Shift gauge with Bosch sensor that has a controller with a 0-5v analog output for logging. I cant seem to locate a universal logger. Any Ideas?

[@DriveTuneMedia]

Hi. Sorry for the slow reply. You need this. xxxxxxxx You can splice the signal cables into the AFC NEO and the Pocket Logger. Make a CSV, download LogWorks, and upload the data - Logworks software, (click the image) www.innovatemotorsports.com/support.php

[@DriveTuneMedia]

Correction. This is what you need, ebay.to/2uxof1h the previous link is only compatible with Innovate products from what I understand. This accepts 0-5v signals which you can program

[@carlosreyes6448]

what is the difference between High throttle and low throttle

[@polanco760]

Using the aem afr do I use the blue wire or white wire

[@RQF799]

How do i get the data log please?

[@carlosreyes6448]

yes I found it what does the sessions mean there numbered one through 8

[@carlosreyes6448]

how do you have you're lm2 setup I have mine setup for afr and rpm and when I go to log works it only displays one line across I guess it's high throttle only

[@DriveTuneMedia]

Hi. If you want to tune with tps and rpm, you need to wire up the tps also

[@carlosreyes6448]

I'm having some trouble tuning with the lm2 and afc neo I did a test run came back to log works and it's only showing 1000 2000 3000 and 4000 rpm and I have the neo set in pro in 16 steps it doesn't show me that on my lm2.

[@DriveTuneMedia]

i dont have it front of me at the moment but Im pretty sure the table axis in LogWorks are customisable

[@jacobcurtis8563]

What is high and low throttle?

[@DriveTuneMedia]

If I remember correctly. You choose the settings.

[@carlosreyes6448]

I see that there is another cable that's not included it's for rpm input would I need that cable

[@DriveTuneMedia]

My mistake. Yeah, you need the analog input/output cable to log the RPM and the sensor inputs. I thought the cable was included with the basic kit.

[@urielrodriguez9226]

Apexi AFC Neo works for mazda 3 2.0 2008? thanks

[@DriveTuneMedia]

If the car uses a narrow band lambda sensor from the factory I dont see why not. If it has a wideband, it is possible the car will de-tune the changes made by the AFC.

[@carlosreyes6448]

how do you find that screen in log works to tune your afc neo

[@DriveTuneMedia]

At the top, click the table icon button towards the right

[@carlosreyes6448]

how can I test my neo to see if it's been installed correctly

[@DriveTuneMedia]

There is a gauge menu on the AFC. Check the readings there.

[@carlosreyes6448]

can I use the lm2 basic kit to tune my neo

[@DriveTuneMedia]

Absolutely. Its perfect.

[@carlosreyes6448]

does it come with software to load on to my computer

[@DriveTuneMedia]

The Innovate analysis software? It is here, its free www.innovatemotorsports.com/support/downloads/LogWorks3Setup.exe Main page is here www.innovatemotorsports.com/support.php Manual - www.innovatemotorsports.com/support/manual/LogWorks3_Manual.pdf

[@nitro1990]

how do you get to log RPM in logworks?

[@DriveTuneMedia]

Hi. I use the LM2, here is the manual (Section4 you need) www.innovatemotorsports.com/support/manual/LM2_Manual.pdf Basically you use the analog cable supplied with the LM2 and tap into the RPM output from the ECU.

[@nitro1990]

Thanks! I just bought the LM-2 but hvent tried tapping the rpm output yet.