How To Use Romraider , Tune Setup , And How To Adjust Launch Control !!

Todays video , Tutorial on how to use rom raider and modify your tunes for you FRS / BRZ /86🙏🏼 hope you guys enjoy and if you do drop a like , comment,subscribe and make sure to hit that bell icon to stay updated and notified when i drop new videos 🙏🏼🙏🏼
IG : Luis_3JLM
Music :
Mamdoffical
on all platforms its my lil brother go support him aswell

[@dcfightclub5130]

Big thanks to this guy got my oft tablet coming wedensday

[@Lou3JLM86]

Appreciate that man !🙏🏼 No problem hopefully this helps you .

[@frsthinh]

@@Lou3JLM86 you can switvh to a different map so there no pops or bangs right

[@Lou3JLM86]

Yes sir you can as long as you make a pop and bang tune and normal on the tablet you will be able to switch back and forth 💯

[@defi_ramsay]

Did adding the pop tune to the stage 2 plus make you feel a little slower vs stage 2 plus without pop tune ? I would like to add pops but if it makes me a little slower I can live without it. I'm about to pick up a OFT V1 today

[@Lou3JLM86]

There is a slight difference in pickup but its really not noticeable, but yes without pops saves gas , and a little quicker . But Ive been running the pop tune since I got the tablet and its been solid .

[@kentjunio3037]

Do u need to change the launch control too if u touch the base timing b ? Thanks

[@Lou3JLM86]

No, it’s not necessary but I if you want the backfires And your launch control set at a certain point I recommend changing it now, oh, the launch control is set at 5500 before adjusting it. In my opinion it’s too high every time you launch get ready for a burn out if that’s not what you want. I’d recommend lowering it down a little bit other than that it’s all based on what you want

[@blackmagic998]

Now is understand why tuners are always silent when working on the laptop, theres so much they're trying to remember and calculate possible outcomes. I brought the gellatto data cable 2 weeks ago and haven't dared plug it in yet. Watching as many videos as possible before I attempt not to brick my DME. Thanks for a great video 🔥 Is it possible to have like a sport button to have 2 tunes, a street tune and a really rowdy tune?

[@michaelbeckwith6374]

im having trouble getting my 2012 wrx tuned.. any way thati can send you the file and have you take a look??

[@HeidiFegles]

Make sure to log your load with the launch control or anti lag, and use that number to set up your timing table. My load is .38 at 4,400 rpm . Ins I use the iat compensation on a switch to control my timing

[@HeidiFegles]

Tactrix for the win. Although for my launch control I use a relay and disconnect the iat by switch and when it hits -40 degrees it pulls timing for a -5 after top dead center spark. Creating anti lag launch control, I make 3 psi on 92 and 8 psi on ethanol. And it sounds sick. But most of all it works and I get super consistent launches.

[@ARHAMALVI]

big shout out to you! this is a hard video to make! glad u went through it all on your computer in depth

[@Lou3JLM86]

Thanks bro I appreciate that so much for real🙏🏼🙏🏼🙏🏼 wasnt an easy one but i had fun lol

[@ryantoomey2906]

I am getting mine in a few days. I need to tune it to stage 2+ should I edit the tune for launch control in romraider and then upload it to my car? Or should I do stage 2+ upload and then upload another file with the launch control?

[@Lou3JLM86]

I have 2 tunes on stage 2 one with launch control and pops and bangs and one without the pops and bangs launch control but still stage 2 . Id recommend that

[@WolfGamingNation]

In base timing b what are the value from up 0.15,0.20 ....

[@Lou3JLM86]

Which ever values I didn’t to don’t have to be changed at all. They get left that way . If thats what you were referring too ?

[@BRZTrackDays]

Do you know where I can find the ECU def for JS10C ? I haven't been able to find it in the rom raider website. :/

[@Lou3JLM86]

Do you have an insta I can help you out

[@Lou3JLM86]

My insta in @luis3jlm

[@BRZTrackDays]

@@Lou3JLM86 thank you. I actually found the Def. From the OFT files, but it didn't work anyways. I'll you up later anyways. Thank you.

[@omargomez7064]

I have a question. Could I possibly do the same thing with the e85 tune?

[@Lou3JLM86]

Yes with every tune you do its starts off as the base tune . But all tunes can be modified, I have 4 tunes on my tablet .. 2 non e85 with different backfire values , and 2 e85 with the same values as the others just on e85 . I hope that made sense 😅

[@davidlewis-laurent8876]

You know any good forums for tuning, trying to learn to tune my wrx with ECUtek and romraider

[@Lou3JLM86]

Usually I go for Ecutek and romraider forums that have the highest traffic, or theres also communities for my car that specialize in tuning. Also depends on what tune your going for . But thats what I do and how I look for them , I wouldn’t be able to name a specific one as they are all different

[@WolfGamingNation]

Where i can find tunes for cars?

[@Lou3JLM86]

Openflashtablet website they have pre tunes for cars that are supported by the tablet

[@pj_hack]

Please man help me! what cable/adapter should I use just to logging with romraider? I don't want to flash. Just logging. Is it there a cheap cable/adapter? Could I use a generic chinese OBD2 bluetooth adapter? Or is it the tactrix needed also for logging? thank you!! :)

[@Lou3JLM86]

Hey appreciate the comment. Im looking into It, I know a couple guys that into tuning aswell. Ill make a video on it when I find out .

[@th3unknown666]

Yo how do I get definition manager.

[@Lou3JLM86]

You mean the defs. ?

[@jajex6071]

Where can i get definition file?

[@nickyear-w7749]

Where do you download the tunes I have a 2014 wrx

[@Lou3JLM86]

Open flash tablets website then the tab thats says off the shelf tunes once you follow the steps you download the tunes put them in rom raider and your ready to go

[@jeuniquebrown4102]

does the automatics come with lunch control as well?

[@Lou3JLM86]

Yes it does same tune setup for autos aswell 💯

[@kevinhernandez1708]

Im stuck, it doesnt let me load a file, you think you could email me the tune you did ?

[@Lou3JLM86]

Hey man , apologies for the late reply . But I think I know why your getting stuck . Message me on instagram if you have one my handle is in the bio and I can help you out more there 🙏🏼

[@xglitchmatex]

i dont see alpha brz tab

[@StampyNoddle]

Do you know how I can turn of launch control ?

[@Lou3JLM86]

Appreciate the comment 🙏🏼 Are you trying to turn off completely or is it set where you don’t like it ?

[@StampyNoddle]

@@Lou3JLM86 I’m trying to turn it off

[@Lou3JLM86]

I haven’t tried turning it off myself, yet. But when I didn’t want to use it , I made a new tune but set the launch control higher in the rpm around 7k I really don’t rev the car that high and never had any issues. That might be an option for you .

[@StampyNoddle]

@@Lou3JLM86 can you pls tell me what that value would be ?

[@Lou3JLM86]

500 - 1000 is the spot you wanna be at

[@adriangutierrez7117]

I’ve had trouble downloading romraider . Do you think you can email the same tune that you showed in this video ? I am currently on stage 2 + but I want more back fire

[@Lou3JLM86]

The tunes i run are the ones i showed in the video. What exhaust setup are you running thats does play a big part in the tune aswell

[@Lou3JLM86]

What’ll help give you more backfires and louder is a front pipe

[@computer970]

Dear sir my car bmw bmw E36 Cabrio engine m40 or m42 how to get post videos training course KZbin tune basic launch control

[@jaxsonmeyer9013]

I have a 2017 automatic 86 and ive seen people put a rev limiter for when its in neutral or park with the rev limit B table but for some reason its not on my file, do you know if you can help me? my calibration code is ZA1JK00D

[@Lou3JLM86]

The year and model play a part in why the tables may be different , but if you do have the other tables and can change them still do . The newer the years have a upgraded ECU with little to no torque dip compared the first gens 13 - 16 brz and frs which is why the tables change . Hope that helps you out , but if you do have anymore questions shoot them my way I’m happy to help 🙏🏼.

[@wakefield6398]

I need help badly, when I upload the stage 2 + into the open image it says ECU definition file missing, please to god help me I’m going crazy

[@Lou3JLM86]

If you go back to where you purchased your tunes there should be a .bin file download that file and that should be what your missing and where it says definitions you are going to upload the file there and hit apply

[@Lou3JLM86]

So make sure you go back and check if you did download it

[@wakefield6398]

@@Lou3JLM86 so I have to download them all? I only download the stage 2 +

[@adinjohnlazalier]

@@wakefield6398 go to open flash performance, look at your orders and I'm pretty sure each tune you purchase (for free) has 4-5 tunes, stage 1,2,2+,2+e85, and an xml file at the end, that's the definition file, save that to your computer and upload it onto romraider, then you will be able to upload any one of those tune files on romraider no issues

[@BRZTrackDays]

​@@adinjohnlazalier I have the same issue and follow these steps. I use the XML definition file Apply, Save. Then load the bin file for Stg2+E85 and get an error "Error Loading. Unknown Exception"

[@TheJimmy3960]

In my romraider i dont get that much parameters

[@Lou3JLM86]

Do you have the most recent Rom Raider update ?

[@FranklinC5]

Hey I got a brz used has the oft and I can’t get the website to load to download these files to change them

[@Lou3JLM86]

Are you talking about the romraider program ?

[@FranklinC5]

@@Lou3JLM86 yea the files needed to open in rom raider

[@Lou3JLM86]

Hit me up on insta ill help you better there 🙏🏼

[@FranklinC5]

@@Lou3JLM86 yo I hit you up

[@JoshC6]

gonna try this out

[@jeff_8_3_19]

Bro the files dont show up on rom

[@cliverdeleon7993]

where to download the files?

[@Lou3JLM86]

Appreciate the comment 🙏🏼 . Which files ?

[@cliverdeleon7993]

@@Lou3JLM86 the files to make the map appear in romraider. I am new at this. I just bought my subie it comes with 1000cc injectors and a kinugawa tdh20 turbo and I want to do what you did so that when I stop accelerating it will do like ace your subie

[@Lou3JLM86]

Apologies for the late reply.. do you have instagram? If you do message me on there my IG is in my bio and I can help you more there

[@kadehuffaker]

Brooo I’m confused. I got the tune downloaded so I take it to romraider and it just says “error loading. Caught expectations” what do I do!!!????!!!

[@Lou3JLM86]

Got you , did you download the tunes you wanted and the bin file that was with them ?

[@kadehuffaker]

@@Lou3JLM86 hey I got it. I didn’t download the xml file I was trying to use the bin file twice. Thanks tho! Great video!

[@Lou3JLM86]

No problem those files are important just make sure you have those downloaded and you should be good to go 🙏🏼 thank you so much I appreciate it 💯

[@BRZTrackDays]

@@Lou3JLM86 I need your help man lol. I have the XML File "OFTv4_ZA1JS10C" and the bin file "Stg-2-Plus-E85-v4.03-LC-FSS-ZA1JS10C" I go to definition manager located the XML, apply, save. Then I try to open the image .bin file and I still get an error saying "Error Loading. Uknown Exception" >.

[@s.r.gam3s]

@@BRZTrackDays ever manage to get that fixed?

[@jeyanthitherce7274]

Thanks sir KZbin training course

[@jeyanthitherce7274]

Thanks so much sir

[@vashbabyyy]

🔥🔥🔥🔥

[@lbop180]

Is that windows 11

[@Lou3JLM86]

Yes it is . Whatever windows you have installed on your computer will have a certain update specific for your version when downloading RomRaider

[@computer970]

My ecu stock

[@mamdoffical7582]

🔥🔥🔥🔥🔥🔥