Romraider & EcuFlash Install

A simple "How To" install Romraider and EcuFlash as well as how to get Romraider Logger to function.
Romraider download
romraider.com/
Romraider ECU Definition
www.romraider.com/forum/viewt...
Romraider Logger Definition
www.romraider.com/forum/viewt...
Romraider Logger Road Dyno Car Definitions
www.romraider.com/forum/viewt...
EcuFlash download
www.tactrix.com/index.php?opt...

[@Mike_44]

Couldn't have done it without your instructions here. Thank you so much! btw, for those looking to do this, the RomRaider dtd file is no longer needed..

[@fredastaire6156]

thanks for the heads up, Mike!

[@Mike_44]

@@fredastaire6156 You’re welcome. 👍🏻

[@stvnswld]

STEP ONE, get Romraider to work! Thank you for this, A+ you are a stud.

[@NeonTuner524]

SO HELPFUL! I'm not sure I could have done this without you. I'd love to see your tuning videos and how to dial in a tune - I just subscribed.

[@crxtodd16]

THANK YOU! I didn't find much help on the forums, but you broke it down to an easy to follow instruction. I appreciate the time you put in to this!!

[@tunedbyjinjer]

That's exactly why I did this. So happy it helped yet another!

[@bmxstar444]

do they not have the 2nd file for the cars def anymore

[@tunedbyjinjer]

@@bmxstar444 for some reason no. You can email me if you really want it but it's not a necessary file to be honest.

[@luispineiro1018]

I agree with the other posts, thank you for bringing clarity with this video. I have a 05 Sti and have had difficulty with the instructions. You’re awesome.

[@ballinbenji30]

YOOOOO YOU MADE THIS BUTTER, your knowledge is greatly appreciated.... Subscribed

[@Sasha12934]

The Great! I Dont know how much time i needed, with out this video...

[@donay3773]

Hello great video lol I spent a whole week looking how to open up it up and nothing came across your video your a lightsaber lol

[@mikaeelmohammed4215]

Instagram brought me here, been following a while. Awesome vid bro, wish this was available when I now started. Would love to see some carberry content wrt to setup and stuff if you’re up to it, even showing the capabilities of the stock ecu would be interesting to watch and informative. Good stuff bro hope to see more soon 👊🏽

[@tunedbyjinjer]

I plan on showing carberry, merpmod, dimemod installs as well as showing features and eventually logging and tuning as well, so stick with me and I will show as much as I know.

[@mikaeelmohammed4215]

@@tunedbyjinjer full support here bro 🙌🏽✊🏽, could hardly wait

[@mxpx148]

Thanks for the video covering this bro! Was the ROM you opened part of the definitions file or was that a car you had pulled the ROM from? Tried opening like you did but there was no image available and also would not let me do anything with the logger settings…it brings up a configuration file saying “Cars definition file not found.”

[@tunedbyjinjer]

The roms I opened were downloaded from romraider website. The definition files are needed to view the roms. If you are seeing an error on rr logger then you did not place the cars.dtd file in the same place as your rom defs.

[@jeyanthitherce7274]

Thanks sir KZbin training course

[@sunnynotay7358]

Good lesson 👏

[@DelawareDefender]

I don't know if you can answer this for me or not, but I have a 21 wrx FA20 and recently got an etune flashed to my ECU through my access port for my J PIPE. Car is running great but now I'm getting a CEL for catalyst efficiency because of the high flow cat in the J pipe. Can I use this software to disable that code and still use my access port and tune after? I need the light gone for vehicle emissions purposes for registration. I'm in need of a solution, this seems like the easiest way, I'm just not sure if it will work, thanks for your time

[@tunedbyjinjer]

This will not work as there are no definitions for 15+ wrx's yet. To get rid of that code you'd have to get a GESI catted J pipe or you'd have to be retuned with ECUEDIT.

[@minipancakess]

Have you tuned any NA-T setups? I think my 2004 outback is supported on romraider. Also would you be able to tell if a car is supported if I can data log with romraider? Or is that completely dependent on ecuflash? Thanks!

[@tunedbyjinjer]

2004 Outback with 2.5 should be supported. Try reading with Ecuflash and you'll find out if your oem rom is defined. I have not tuned any NA-T Subaru's

[@minipancakess]

@@tunedbyjinjer Thanks for the quick reply! That is what I have, and is read from ECU under the "ECU" dropdown menu? I also dont see my car listed under the selectable vehicle type so would I have to download something else? The closest thing I see is drive by wire LGT/Baja for 2004, mine is a 2004 Outback with a throttle cable

[@tunedbyjinjer]

@@minipancakess once you get the tactrix connected you'll need to connect the green flash connectors under the dash and possibly one other connector needs to be jumped. "Read Ecu" will be a highlighted button at the top of ecu flash right below "ECU" drop down. You flash method is probably the same as 02-05 wrx but can't be certain and I can't recall off the top of my head all the options but one of them should work.

[@minipancakess]

@@tunedbyjinjer yeah I tried just now, maybe I’ll need an int plug from Cobb, the one I have is for an 02 and I’m guessing the one underneath my car works with the 03-05 looks similar. I’ve also tried choosing all the subarus and doesn’t look like any of them work when hitting read ecu. Do I have to download the .hex file from rom raider for it to work? Or is that unrelated because this is ecu flash?

[@tunedbyjinjer]

@@minipancakess tactrix sells them as well but you can also just jump the connector with wires yourself.

[@pj_hack]

Thank you for this amazing step-by-step guide! I have a question: if I need to log only (no ecu flashing, no tune reading, just loggin values such as IAM, AFR, boost and so on) do I need Tactrix openport? Or can I use something cheaper? Can a generic bluetooth OBD2 cheap garbage adapter be used? And can I just log values (no tuning) on a ecutek tuned STI? TY!!

[@tunedbyjinjer]

You could buy a few different kinds of obd2 connectors and log with various android apps but romraider will only work with tactrix as far as I know.

[@pj_hack]

@@tunedbyjinjer Thank you!

[@pj_hack]

@@tunedbyjinjer Update: I did it with a VAGCOM KKL china cable. logging works like a charm ;)

[@gothops154]

This was very helpful but where are you getting the ROM .hex files from? I started my car and did an ECU read using ECUFlash but then the file I save only has .srf and .bin options

[@tunedbyjinjer]

Files can be saved as bin or hex after opening in romraider or ecuflash. The one I used in the video was straight from romraider's oem rom list.

[@robsanty8454]

omg thank you sooooo much!!

[@JoelZerr]

It appears as though the car.dtd file is not longer in the Logger Road Dyno Car Defs forum? Do you know where I can still access this file?

[@tunedbyjinjer]

I haven't found it again posted online but you can email me at [e-mail] and I can provide it. Although it isn't needed unless you really want romraider dyno but I'd suggest Virtual Dyno as it's much more accurate.

[@kbcustoms77]

Thank u so much for this video . But my question is. Is it must u must have java 32bit in ur system before the romraider will work properly. On window 10 ?

[@tunedbyjinjer]

Yes romraider only functions properly with Java 32bit.

[@kbcustoms77]

Okay please can u do a video how to install 32bit java for romraider to work on window 10 for please that is my issue thank u

[@tunedbyjinjer]

@@kbcustoms77 maybe eventually. The jist of it is, go into my computer, go to Local Disc C:, then Program Files x86, then find Java and uninstall it. Then go to romraider website and in the Getting Started area you'll find the link to download 32bit Java.

[@GHEORGHE-IORDACHE]

I saw free SSM on your desktop, with what cable do you use it?

[@tunedbyjinjer]

Tactrix 1.3 or USB Obd2 with FT232RL

[@rashawnmoore4402]

So trying to tune my sti. I got romraider working and I think logger working. But I cant find a rom to upload for the first part. When you go to upload it’s there but when I go to upload I see nothing. Do I have to get the roms separate?

[@davidlewis-laurent8876]

Hey man you know any good forums for tuning? Just read a few books, but would love to join a community

[@tunedbyjinjer]

For Subaru tuning it would have to be romraider.com

[@JoelMotaPhoto]

Thank You

[@Z3CHYD]

The romraider website only has ecu_defs on the one thread you show, it no longer shows ecu.dtd. Is that something that's keeping me from opening anything? because nothing is opening for me when I open romraider

[@tunedbyjinjer]

Do you mean the cars_defs.dtd? Ya you don't need that one.

[@harrisbrosautomotive6114]

i was able to bring everything up on the Romraider ecu editor but when i went to logger i got a error loading deffinition, nosuch element exception. im stuck on how to fix this, can you help?

[@Lennysuga]

Works for older sti models but won’t work with 13 sti maps , says definition not found , anybody know why ?

[@42011KID6]

Any way I could get in touch with you to help get me going to pull a ROM using ECUflash. My ECU flash shows no definitions even once unzipped into the file

[@tunedbyjinjer]

[e-mail], @tunedbyjinjer on ig

[@jean3251janine]

Thanks for the video. Why do I not have "logger" on the top left menu though? I have "File, Edit, Definitions, View, Tools, Help" but no "logger"? thanks

[@jean3251janine]

I downloaded logger_v370 (update from logger_v362) but I don't have the logger.dtd file in the folder the way you do with v362. Could this be the reason why I don't have the logger option on the menu?

[@tunedbyjinjer]

@@jean3251janine the logger program should be a part of the download so I'd uninstall and redownload

[@niko-di2ij]

This is a late comment. But I have a 64 bit laptop and romraider only works with a 32 bit Java software for me. Is there a link to a direct 32 bit download or do I have to get an older computer?

[@tunedbyjinjer]

www.java.com/en/download/manual.jsp the larger Offline non 64bit download.

[@streetangel6783]

would u assist someone remotely thru Anydesk, to set up both ecuflash n rom raider. even after ecu flash is installed, when trying to load map it says... unknown rom image.

[@tunedbyjinjer]

I've never done a remote setup but I'd be willing to try.

[@admstudios7]

hello , thanks for the vídeo very explanatory and good, question can i get rid off engine codes with ECU flash or romraider since cobb took that from us in the access port with the new update ? I have a sti 2016 with a knock sensor read out and i changed it but after 2 days of driving the code came out again, any help it would be appreciated thanks for the very detailing explanation of the installation of those 2 software

[@tunedbyjinjer]

You can remove the accessport and disabled engine codes but once you re-install an accessport those codes will be enabled again. Codes like knock sensor aren't ones that you'd want to disable though, you need to figure out the issue.

[@admstudios7]

@@tunedbyjinjer thanks for responding back , i do really want to get the issue resolved and the knock sensor is new is OEM from Subaru it was working fine for 2 days from first day of installation and Monday afternoon started to malfunction again probably is the harness plug where is inserted, Thanks

[@tunedbyjinjer]

@@admstudios7 what code is it throwing up? Did you clock the sensor properly when you replaced it? They need to be bolted at the correct tq and facing the correct way.

[@mannyjabr7648]

i know this video was from awhile ago but do you have any links for a base tune for a legacy gt ej20x. tuners in my area won’t touch jdm. so open source is my only other option

[@tunedbyjinjer]

What vehicle are you running it in?

[@mannyjabr7648]

@@tunedbyjinjer 2006 Legacy Gt

[@alanasmarcinkenas3798]

So with Subaru files its gonna work with BMWs? Thanks in advance! Great work

[@tunedbyjinjer]

No clue, never used in on anything but Subaru's and EVO's

[@mattshelseaarjuna6291]

can't find the dtd files for car defintions or the logger anywhere. not on the post as the video shows... and im not really sure where you'd find the dtd logger files at all

[@tunedbyjinjer]

It is not needed as it only is there for RR Logger dyno function.

[@mattshelseaarjuna6291]

@@tunedbyjinjer i keep getting a 32 Bit JRE Incompatible version error as well...

[@tunedbyjinjer]

@@mattshelseaarjuna6291 you need to uninstall 64bit Java and go download and install 32bit Java.

[@mattshelseaarjuna6291]

@@tunedbyjinjer Thank You So Much!!!

[@juanalejandro41]

hi I downloaded it the only thing is the javascript that it is asking for a 32-bit one but can't seem to find one to make everything work accordingly where can I get that if you know?

[@tunedbyjinjer]

So if you already have Adobe Java installed on your computer you will need to uninstall it. Then head over to Adobe Java and download the 32bit version. Once installed romraider should function properly.

[@G33kman19]

Hey, thanks for the awesome video! So, with RomRaider it has a linux version but, with the ECUFlash software I didn't see Linux listed anywhere. Just wondering if you (or anyone else) has had any issues getting this up and running. My laptop has Arch on it right now and I'd rather not reload Windows back on or order a cable until I know that part will work at least. Thanks again for the video though. Much appreciated!

[@G33kman19]

Just did a little more research (Google Gemini) and realized I should have thought about this already, ECUFlash doesn't have a Linux version to install but I guess a lot of people have had success using WINE in Linux to run the Windows application. Just wanted to update this for anyone else that may be looking for answers to this question.

[@tunedbyjinjer]

I have never used romraider or ecuflash on anything but windows so unfortunately I'm no help. Might find help over on the romraider.com forum.

[@sunnynotay7358]

Hello sir this was too helpful but what is making me stuck is the car def . Where did you grab this two files . Because the other ones don't work

[@tunedbyjinjer]

Should be the last links in my description for the video.

[@thefisch1332]

@@tunedbyjinjer the link is missing the cars_def.dtd file. Only cars_def.xml is available. Thanks

[@tunedbyjinjer]

@@thefisch1332 that is because that def is listed in my next video where it is needed for logger setup.

[@thefisch1332]

@@tunedbyjinjer I mean the .dtd file is no longer on the romraider website for download, unless I'm blind. Ha. Thanks again for the videos. Very helpful

[@tunedbyjinjer]

@@thefisch1332 you are correct. It seems to be missing from the Logger Road Dyno Definitions sticky on Romraider. Probably by accident but if anyone needs it they can email me at [e-mail].

[@hunterstoliker5419]

Hey man, I love the detailed tutorial, although for some reason it fails every time I try and read the ecu. Any way you can help me?

[@tunedbyjinjer]

What do you mean fails? Year Make and Model?

[@bradyswanson2181]

@@tunedbyjinjer Also happening to me 2013 Subaru WRX

[@tunedbyjinjer]

@@bradyswanson2181 so ecuflash sees and recognizes your vehicle prior to trying to read ecu?

[@JJustCool]

Hey, great video but I am having a problem launching my Logger I keeping getting a JRE error. Can you help?

[@tunedbyjinjer]

Wrong version of Java. Need to uninstall the 64bit version and go to Java and download the 32bit version

[@Keishma26]

I need help with a 2017 brz setting up Ecu flash and getting def files to work

[@joshjacob149]

I have a 2010 Impreza 2.5i with a 4eat transmission, is it possible to even tune my car is romraider does not have any definitions?

[@tunedbyjinjer]

Romraider may not but ecuflash I believe does

[@michaelheatmakerz3391]

I could not find the car dtd file when downloading do I need that to open a rom? Like the other comment I tried opening image and I had nothing? Thanks for any information

[@tunedbyjinjer]

As others have pointed out, that file is currently missing from romraider, it is not necessary for romraider editor only for full use of rr logger. If you absolutely want it you can email me but it's not necessary.

[@michaelheatmakerz3391]

Oh okay this might sound stupid, but for the tune I see you opened up the legacy one is that a tune you made or is there some where you download a tune? I got a 2004 jdm forester so when I plug into my ecu will I be able to just start editing? I apologize for the questions

[@tunedbyjinjer]

@@michaelheatmakerz3391 that was just a random rom I downloaded. You'll need to read and save your rom using ecuflash. From there if you have the proper defs you'll be able to edit and reflash.

[@michaelheatmakerz3391]

@@tunedbyjinjer okay sweet yea I was kinda thinking that's how I would have to do it! Thanks alot I appreciate the help this is my first time using this software!

[@Quietg35]

Can’t find any ecu Defs for a usdm 03 wrx. I did all the steps and nothing popped up in my files on rom raider for some reason

[@tunedbyjinjer]

Usdm 03 wrx defs are naturally a part of romraider standard ecu defs. You'll need the rom to be able to open it up.

[@OTBGarage]

I’m having an issue with the files they’re not downloading as a XML file and I’ve already tried extracting them as well. Would you know if there has been some sort of patch?

[@tunedbyjinjer]

What type of file are they downloading as?

[@OTBGarage]

@@tunedbyjinjer they’re downloading as a Microsoft edge html and it’s doing the same thing for the logger definition as well

[@tunedbyjinjer]

@@OTBGarage so your the second person I've heard of this happening to. If you want, shoot me an email of what you need and I can possibly try to email them to you in hopes they come through the right way. [e-mail]

[@Potato-vl2ve]

The cars_def.dtd file was removed from the forum. Where can I find this and do I still need it?

[@tunedbyjinjer]

Never needed it for main rr logger functions. It's only for RR dyno, to which I would suggest using Virtual Dyno anyways.

[@raulhernandez4484]

So do you have to go and get a rom or log of your own car to get a file to put into ecu flash and the rom ecu editor ?

[@tunedbyjinjer]

No, you can go to romraider.com and go to the oem rom list and snag one of those if you want to open a rom for viewing.

[@Stewwy3K]

Hey Jinjer, I have followed everything and scoured online. For some reason ECUFlash cannot recognize the ROM on my 08 USDM STI MT. I would love if you could help

[@tunedbyjinjer]

@@Stewwy3K you can send it to me at [e-mail] and I can see if there is a specific reason you cannot view it.

[@gothops154]

Can you use the tactrix cable to read and clear engine codes (not just disable the code from appearing)?

[@tunedbyjinjer]

Can use it for both.

[@gothops154]

@@tunedbyjinjer can I read codes with EcuFlash or RomRaider? I’ve been trying to find info on this and it looks like I can use the tactrix cable like you say, but with EcuFlash/RomRaider I’m not seeing anything about reading/clearing codes (aside from disabling them). I’ve been reading I may have to use LearningView or ECUExplorer but I’m trying to limit the amount of different software if possible. Been looking around the menus for EcuFlash/RR and I’m just not seeing anything for reading/clear codes

[@tunedbyjinjer]

@@gothops154 read and clear codes with romraider logger

[@Ghosty23945]

I got live data logging working, but how do you get the logcfg file set up for logging with the SD card only?

[@tunedbyjinjer]

I never use the SD card for logging as logging speed is cut to the point I find it useless.

[@kerryfrancisco1123]

I need help when I download Rom raider it says rom raider logger instead of rom raider ecu editor why is that?? No ecu manager pops up on the tabs either what can I do to fix this??

[@tunedbyjinjer]

I would completely remove romraider from the computer and retry downloading and installing romraider.

[@AlroyStartingOver]

Would it be possible for you to make a downloadable zip file with all these resources? the romraider site keeps failing to load pages. I would really be appreciated.

[@tunedbyjinjer]

Romraider was down that day, shouldn't have an issue now.

[@antsupertramp]

Hey on my ecu flash I don't have the medadata for the secondary air injection, do you have it on yours ?

[@tunedbyjinjer]

The control tables are not but the engine codes are.

[@antsupertramp]

@@tunedbyjinjer ok so does that mean I can't shut them off?

[@tunedbyjinjer]

@@antsupertramp the codes, yes

[@FigueiredoFamily]

Hi is there def for 09 legacy 2.5i N/A ?

[@markswable996]

Would you be able to explain how to cancel P0420 code in ECU for off road on '05 outback 2.5i

[@tunedbyjinjer]

Open rom in ecuflash and scroll down till you find the check engine light code you want to disable and choose disable.

[@cooperjadczak378]

You got a link to a cheap obd to usb so I can flash my 02 wrx Impreza?

[@tunedbyjinjer]

My buddy had success with a fake Tactrix from Aliexpress but I wouldn't recommend anything but legit Tactrix Openport 2.0 from Tactrix.com

[@cooperjadczak378]

@@tunedbyjinjer may as well just buy a used Cobb access port 😂

[@tunedbyjinjer]

@@cooperjadczak378 depends on what you want from the car. For an 02-05 wrx the accessport will never compare to Carberry rom and at $169 it's still much cheaper than an accessport and also to tune your own vehicle with Cobb you'll have to spend an additional $150 to Cobb for the software. But to each their own.

[@miguelnavarro1682]

Why does my romraider say ECU/TCU logger and not ECU editor like yours ?

[@tunedbyjinjer]

You are seeing the Logger, go into programs and find the ecu editor and drag and drop it onto your desktop if you wish.

[@ZERODSF]

So can I run e85 tune on this ? I’m new to the game just tryna figure this out

[@tunedbyjinjer]

Depends on vehicle year make and model.

[@stumby89]

i was having troubles understanding till i watched this. however, when i grab my stock rom from ecuflash and import it into romraider to tune it says that my definitions is not found and asks if i want to choose one so i do and i choose the romraider ecu_defs and then it says that my definitions dont seem to match

[@stumby89]

2013 wrx btw

[@tunedbyjinjer]

Many of the 2008 and newer wrx's and sti's roms do not seem to work properly on romraider. Use Ecuflash for these roms and only use romraider logger to log data from these ecu's.

[@stumby89]

@@tunedbyjinjer thank you! I appreciate the quick reply. I want to try to tune myself but I also have bought an etune from Eric over at torqued performance. Just in case haha

[@markswable996]

Can I cancel P0420 code in ECU for off road with this or some other way?

[@tunedbyjinjer]

Yes

[@marcospalacios22]

When I try to open a tune up on rom raider it says ecu definition not found and I did exactly what you did and I’m confused on how to fix that

[@tunedbyjinjer]

On which program?

[@marcospalacios22]

@@tunedbyjinjer romraider ecu editor

[@tunedbyjinjer]

@@marcospalacios22 try in ecuflash. Probably missing the def in romraider or it hasn't been defined for romraider.

[@itswinter8459]

it says incompatible jre detected and that i need the 32 bit jre, but i re downloaded jre and it still doesnt let me open the logger, i have the tune file on the left side when you add an image in, but i cant see any tables or anything like that and im not sure what to do. could ya help?

[@tunedbyjinjer]

Most likely still the incorrect Java download. Best to download from romraider's website under the tab "Getting Started".

[@itswinter8459]

i did that and installed everything that you said from the video. the tune shows up on the left but i can’t click it or open any tables or anything like that

[@tunedbyjinjer]

@@itswinter8459 does it open in ecuflash?

[@austinliver3387]

So I did all of that, when I opened ecuflash and read the ecu it did it successfully but after I hit Ik a prompt came up saying rom image not recognized by current definitions and there was 3 options under it abort, save, and create new rom. I need help I have a 03 WRX

[@tunedbyjinjer]

Year, Make and Model? Has it been tuned before?

[@austinliver3387]

@@tunedbyjinjer 2003 Subaru Impreza WRX it has been tuned before I got it. I’m pretty sure it was tuned with ecutek so I have to see about getting the tune removed

[@tunedbyjinjer]

@@austinliver3387 that is most likely the reason you cannot view the rom. If Ecutek or Cobb you won't be able to access it. If tuned with Carberry you can try adding those rom defs and see if it can be opened.

[@dylandunford6053]

when i try to extract the romraider ecu definitions my computer is saving it as html instead of an xml file. what do i do?

[@tunedbyjinjer]

I have never seen a computer do this tbh.

[@jaychaka]

Mine as well , I can’t open RR after extracting files and having them all in a folder together because none of them are xml

[@djbajapanty1424]

with this work on my audi tt mk1?

[@Motorsport_Mike43]

can you message me i am having a hard time getting the car selection table on ecuflash to come up.

[@tunedbyjinjer]

@tunedbyjinjer on IG or [e-mail]

[@Bruhcuzgaming]

What about the 32 bit Java software you need for romraider to work

[@tunedbyjinjer]

That's something I've had to address in the comments quite a lot and plan to add another video explaining the common issues people have and how to address them.

[@keithwalton7231]

I am trying to get ECU flash to work on my 01 OBW that has an EZ30D in it. Just trying to figure out what I might be doing wrong

[@tunedbyjinjer]

Well, what's the issue?

[@keithwalton7231]

@@tunedbyjinjer I can’t find the Outback ECU in ECU Flash so it keeps saying unable to connect even though I have the jumpers in and the green connectors connected

[@tunedbyjinjer]

@@keithwalton7231 you need a special defs. I'll try to find them and toss the link here.

[@tunedbyjinjer]

@@keithwalton7231 send me an email at [e-mail], I have a zipped file that may work for you. I'm not sure exactly where I got it from originally but I do have it at least.

[@keithwalton7231]

I sent you an email thank you for your help

[@Mr_Vosakisen]

This is an awesome video, Ecu flash works perfect, however for me Romraider has all the options greyed out, I can log data but I cant see the files. Im on a 05 FXT

[@tunedbyjinjer]

What options on romraider are you referring to?

[@Mr_Vosakisen]

@@tunedbyjinjer on your video at 5:56 you see all the options up on the top, the only one I that is not greyed out is the blue save button, the others dont apear to me like that. Or is that normal? Thanks for your time and replying back

[@Mr_Vosakisen]

@@tunedbyjinjer hey there Jinjer, I was able to solve it, I had a smooth brain moment and I actually hadn't loaded a Hex file onto romraider and thats why I wasn't able to open anything.

[@TBguesswho]

i keep getting a error saying i need a 32 bit JRE any idea of what that is ?

[@tunedbyjinjer]

You need to uninstall 64bit Java and download 32bit Java from Adobe's website.

[@Kickazzallday]

I'm having issues with the Ecu Definition not being found. I did exactly what you did. I even researched videos and forums but doesn't helped me. Still doing the same thing. If you can, please help me. I just need to disable my check engine code for Air pump delete.

[@tunedbyjinjer]

What vehicle are you trying to find an ecu def for?

[@Kickazzallday]

@@tunedbyjinjer 2012 STI

[@Kickazzallday]

@@tunedbyjinjer When I open my ROM file, it doesn't work. Says ECU Def not found.

[@tunedbyjinjer]

@@Kickazzallday has anyone tuned the car previously?

[@Kickazzallday]

@@tunedbyjinjer It has not been tuned before, everything is stock. Just trying to delete the CEL because of air pump delete

[@macanicboy43]

After you do data log and where you go to see your logger file

[@tunedbyjinjer]

Easiest way is to first setup a save location but if you did not do that then the logs will be saved in Local Disc C/ProgramFilesx86/romraider

[@rboyett]

Why do you have to download ecu flash? What does that let you do that romraider does not?

[@tunedbyjinjer]

Ecuflash is how you actually flash the rom to your vehicle. Romraider can not do this. Ecuflash doesn't have a logger so romraider is needed for that. I prefer making tune adjustments in romraider personally but to each their own.

[@rboyett]

@@tunedbyjinjer makes sense.. moving to open source from Cobb due to current events. Open source is a lot more complicated so trying to learn as much as I can

[@tunedbyjinjer]

@@rboyett it is much more complicated to setup and such is why I made these videos, but the benefits in the rom are well worth it.

[@kristapsdobulans4928]

i did everything lioke you showed but still error definition not found , can you please help me , thank you in advance

[@tunedbyjinjer]

Eroor definition not found means you either didn't place definitions in the right location or haven't dictated where the program should look for the definition

[@th3unknown666]

I don’t have definition on rom raider. How do I set that up

[@tunedbyjinjer]

Which part? I have videos for the install and setup.

[@donay3773]

But I'm trying to load a Suzuki 1gen Hayabusa map on it and it can't open why is that?

[@tunedbyjinjer]

I have never tried loading anything but Subaru roms so I'm of no help here. I don't think this program will view a Hayabusa map.

[@donay3773]

@@tunedbyjinjer thank you so much for replying lol I trying to ask around but get no response from other videos your video saved me from throwing my laptop across the street keep up with the good content

[@markswable996]

Does this work on a 2005 Subaru outback 2.5i

[@tunedbyjinjer]

Yes

[@collinstrouth8714]

Do you know if you can download on chromebook

[@tunedbyjinjer]

I have no clue tbh.

[@everydaynews816]

Im having all kinds of issue stuff not coming up the same at all. Could use alot of help

[@tunedbyjinjer]

What kind of issues. Need more information so I can help

[@Streamy1337]

Has anyone been able to get ECUFlash to read and write on a 2018 wrx sti?

[@tunedbyjinjer]

There are some ecuflash defs for 2018+ sti on github.

[@Fighka303]

32bit JRE required?

[@tunedbyjinjer]

Need to uninstall Java and go to their website and download the 32bit version, not the 64bit version.

[@boostedgrumpy]

Need help my logger says I’m 64 bit need 32bit?

[@tunedbyjinjer]

You may need to uninstall Adobe Java and then go and re-download Adobe Java in 32bit instead.

[@Zoetakeoff561]

romraider not working keeps saying ECU definition not found need help trying to get pop tune

[@tunedbyjinjer]

Year make and model?

[@proximitybeejay3673]

How do i data log just to my Tactrix mem card ?

[@tunedbyjinjer]

I have not ever messed with this. I just use my laptop or my cell phone., working on going Android head unit and just log there.

[@proximitybeejay3673]

@@tunedbyjinjer i have android unit, i use torque to monitor things but logging with that is uselss as you cant view in Mega log or rom. I have logged using BtSsm on Android unit and to phone but for convenience i want it to Memory card so cables are not all over

[@tunedbyjinjer]

@@proximitybeejay3673 guess I'll give it a shot one of these days just so I know and can help

[@mrkennyxwayne]

i cant get romraider to work it keeps saying my def arent good

[@tunedbyjinjer]

Need more info

[@calebforester418]

Having trouble finding the cars_def dtd

[@tunedbyjinjer]

Don't need it.

[@scottboone494]

could you show how to get it to connect to the car mine won't find my ecu.

[@tunedbyjinjer]

What vehicle are you trying to connect to?

[@scottboone494]

@@tunedbyjinjer 2003 Subaru Impreza WRX

[@scottboone494]

@@tunedbyjinjer sorry for the late reply KZbin didn't tell me You had responded.

[@tunedbyjinjer]

@@scottboone494 should automatically connect, if not you may need to select the ecu type from the drop down at the top of ecuflash.

[@scottboone494]

@@tunedbyjinjer I have tried that still doesn't work 😪 I thought it might be in the settings but I have no idea where. Thank you for replying.

[@johncruz9845]

Does this work on 2020 wrx

[@tunedbyjinjer]

No it does not currently work on the fa20dit or fa24dit engines

[@jorgevallejo2193]

Hi, why my romradier don't open image?

[@tunedbyjinjer]

Usually due to a missing definition

[@intergrale4x4]

It's hardware stuff in the UK I'm having issues with if anyone could point me in the right direction Thanks Craig

[@tunedbyjinjer]

What's going on?

[@intergrale4x4]

@@tunedbyjinjer I'm not sure which ODB to USB connector will work with my linux machine ebay ones are mostly fake or stupid prices

[@tunedbyjinjer]

@@intergrale4x4 the only OBD to USB I will recommend is an actual Tactrix Openport 2.0. It is about $170usd but it's legit and it works perfectly.

[@intergrale4x4]

@@tunedbyjinjer Thanks for the Info I'll look around for a UK supplier unless of course you know of one ;)

[@tunedbyjinjer]

@@intergrale4x4 I do not unfortunately. The last guy I talked to that lived across the pond ordered it from Tactrix.com.

[@xcgavin5658]

I have 64x Java how do I get the 32

[@tunedbyjinjer]

Completely remove 64bit Java and go to java's website and download the 32bit version.

[@SpendioGarage]

Whenever i download an .xml file it comes up as internet explorer, is this okay?

[@tunedbyjinjer]

Are you trying to open the xml file?

[@SpendioGarage]

@@tunedbyjinjer no I can open the xml file and see all the code online but when viewing it in my documents it’s saved as a Microsoft edge html document (.xml) I was wondering if the file will still work this way in romraider

[@tunedbyjinjer]

@@SpendioGarage no, it needs to be downloaded and saved as an xml file for romraider to view it.

[@SpendioGarage]

@@tunedbyjinjer okay thank you!

[@swackwrxgti181]

Followed everything you said I can’t find a rom file

[@tunedbyjinjer]

What vehicle rom are you trying to load? Not all are defined.

[@V8Spitfire]

When ever I go onto the forum for car definitions it only gives me 1 file. I believe that’s why I can open a rom. Does anyone know how to fix this?!!!

[@tunedbyjinjer]

The second file cars_def.dtd that I mention in my video is not a necessary file for any rom viewing functions.

[@V8Spitfire]

@@tunedbyjinjer ok thank you. Probably something on my end. I’ll have to give it another look over. Thx for this amazing tutorial.

[@tunedbyjinjer]

@@V8Spitfire is it saying file not found?

[@V8Spitfire]

@@tunedbyjinjer no, it doesn’t say anything I just can’t find any roms. Do I need to download it from my cars ecu first?

[@tunedbyjinjer]

@@V8Spitfire yes, use ecuflash and "Read" the rom file, then save it. If you still can't open it send it to me at [e-mail] and I'll see what I can do for you.

[@alvintoussaint1916]

Great tutorial but still got lost have a 05 jdm legacy that needs tcm turned

[@tunedbyjinjer]

Tcm cant be tuned.

[@alvintoussaint1916]

@@tunedbyjinjercan I whatsup you

[@alvintoussaint1916]

Or how ever you like

[@tunedbyjinjer]

@@alvintoussaint1916 whatsapp [phone]

[@wesleyhutchinson3883]

Are you tuning a bugeye

[@tunedbyjinjer]

I've tuned many bugeyes.

[@wesleyhutchinson3883]

@@tunedbyjinjer where are you located

[@tunedbyjinjer]

@@wesleyhutchinson3883 Northern California

[@wesleyhutchinson3883]

@@tunedbyjinjer can't seem to find dm what's your contact info

[@tunedbyjinjer]

@@wesleyhutchinson3883 on IG @TunedbyJinjer or email at [e-mail] I'll be making a Fb acct soon for it as well under the same name.

[@gioortiz8425]

Need help cant find a image

[@tunedbyjinjer]

What are you trying to find?

[@ddvil.999]

Damn I dont have the "RRFds" folder, after install the RomRaider

[@tunedbyjinjer]

RRFds?

[@ddvil.999]

@@tunedbyjinjer "LogDefs" 5:01

[@boysfromtbay8707]

“Logger definition not configured” helppppppp

[@tunedbyjinjer]

Follow my video and it will get figured out.

[@brianmackey8548]

I'm looking for help

[@tunedbyjinjer]

On?

[@Bee-fr7zk]

It didn’t work for me

[@xcgavin5658]

Logger definition not configured

[@xcgavin5658]

I have the latest file.

[@xcgavin5658]

I see no definition manager

[@tunedbyjinjer]

You need to locate logger definition within romraider logger program under settings.