How to Use Washes (Tips & Tricks) - HC 410

In this hobby cheating tutorial, I explain what a wash is, how to use it, how to get the most from it and how to avoid common pitfalls with this product. Hope you enjoy!
0:00 Intro
1:03 What is a Wash?
3:15 Tools
4:45 The Brush for Wash
5:30 Application
6:50 Good vs Bad Results
8:54 Tips & Tricks
15:17 Outro
Hobby Gear
Winsor & Newton Brush (Amazon): amzn.to/495WKel
Synthetic Brush Set (Amazon): amzn.to/3Q4np2u
Plastic Well Palette (Amazon): amzn.to/491FOFA
Multi-Pack Well Palette (Amazon): amzn.to/40cD04z
Exacto Blade Pack (Amazon): amzn.to/3Qduk9x
Rubber Cutting Mat (Amazon): amzn.to/47blpMP
My Games (w/Uncle Adam)
Majestic 13 Game: tinyurl.com/3yx5bbp2
Space Station Zero Game: tinyurl.com/54jbx5vr
Reign in Hell Game: tinyurl.com/nhdwp8tv
Support us on Patreon: / vincentrventurella
Merch Store: vince-venturella-shop.fourthw...
Monument Hobbies Pro Acryl: (paint, primer, basing paste, etc.):
monumenthobbies.com/?ref=VinceV
10% off your total order! Enter COUPON CODE: VinceV
Element Games - (ALL your hobby needs, UK based, ships WORLDWIDE):
elementgames.co.uk/?d=10829
Use Referral Code: VIN0010 for DOUBLE STORE CREDIT CRYSTALS on your first purchase!
Social Media
Twitter: @warhammerweekly
Instagram: VincentVenturella
Email: [e-mail]
RPG Podcast: podcasts.apple.com/us/podcast...

[@rockycaroozo]

Now I always thought Wash was the thing 40k players forgot to do before a tournament... you learn something every day.

[@melshk]

Another great video Vince! You forgot to mention that it's doubly important to prep your minis when using washes/drybrushing. Those mold lines and bad joints stick out like a sore thumb once the wash has done exactly what it's supposed to do.

[@VinceVenturella]

Great point!

[@Seraphim2611]

The big dog never lets us down! Thanks Vince

[@the_zombie_ritual897]

Indeed!

[@JakeDogg-RIP]

BIG Dogg TECHNOMANCER!! 😉🔥🔥🔥🍻😂

[@rawshitirule]

I took one look at this guy and thought, "This is the guy I want my hobby advice from.".

[@oliverp3545]

Honestly after I started using varnishes I finally am happy with how my washes are, gloss for the smooth flow and matt over to look nice.

[@ObsidianCrane]

I feel like this one was more "Washes: Core Skills", because when you move into more advanced application, things like that KoS can take washes just fine but it requires a more considered approach and using them more like glazes or regular paints but taking advantage of some of their wash properties to make the work a little easier for army painting.

[@earnestwanderer2471]

I see more and more examples of painters using washes right over the primer layer and then doing the actual painting with layer type paints over that. Back in the dark ages, we always just used an ink wash over the finished model, which is what I still do. I wouldn’t mind seeing an “advanced technique” video on using washes and inks, as well as any tips for using wash type paints for doing blending and transitions. Like shading from red, through purple and into blue. Or shading from brown bark into green branches and stems.

[@ME-hm7zm]

Same, I basically do every mid tone color on a model, wash it all over, then comeback with mids and highlights. I have also heard of doing highlights before the wash but have never tried.

[@isisnmagic1812]

Can't have a Saturday without Vince helping us get better, thank you sir.

[@VinceVenturella]

My pleasure!

[@davidwasilewski]

I’ve found that when painting smaller scale miniatures (6mm and 10mm), Newton and Windsor Inks e.g. ‘nut brown’ seem to be better than the regular GW and Army Painter products. The Newton and Windsor Inks have much less surface tension and so you don’t get the ‘pooling’ or ‘glazing’ effect.

[@RexytheRexy]

Thank you so, so much for this. I'm painting an Ork army - my first army - that involves a lot of metallics and intense colors that need to be properly aged and darkened down. In addition, it's a Dread Mob, focused on larger models (akin to Dreadnoughts, with a lot of mid to large-mid size mechs), so there are plenty of larger surfaces to worry about. Needless to say, washes are an essential part of that process, and there are a lot of nooks and crannies to take care of. The techniques and tips you provided in this video were really helpful, from explanations of how washes work and their composition to the brushes to use to the overall application techniques. I really appreciate how thorough you are, and how much knowledge you share (I'm also really, really envious of your wall of paints).

[@Strkr3]

All hail the Paintfather! Thanks once again for the breakdown! Always helpful if new or just needing a refresher!

[@philbourgeoi2875]

I always feel like you are reading my mind with the timing of your tutorials. Bless you

[@jonbauml225]

Great tip about brush choice. Capillary action works both ways, makes perfect sense

[@prickswithstix1113]

Great video!! I love these topics when you take them on. I get reminded of the fundamentals and always find a rid bit to make my journey better. Thanks😊

[@VinceVenturella]

Glad you like them!

[@boardwithpaint]

Thanks for the explanation of how to formulate your own washes! I always wondered what the "secret sauce" was for this, as I never seem able to produce something with the same characteristics (I inevitably end up creating some variation of a glaze that won't pool into recesses). Also appreciate the discussion of how and why a wash can destroy a brush.

[@tychay]

the cheapest way to fix it is to add a tiny bit of dish soap. This will break up the water surface tension and cause the homemade acrylic wash to flow into the recesses.

[@boardwithpaint]

@@tychayI assume flow improver would do the same thing?

[@christopherheintz2634]

​@@boardwithpaintyes. Both are surfactants (reduce surface tension). Just remember with most artists flow improvers it's like, 1 drop per liter, or something ridiculous. They will all have instructions on preferred dilution. It doesn't take much! And they can only reduce the tension so much! Have fun!

[@CalAndAly]

Great vid man, really appreciate your thorough approach to things like this. I grow every video I watch

[@VinceVenturella]

Awesome! Thank you!

[@fokin_skaven]

Nowadays I usually just use washes for glazing some colours in after enamel washes, that are integral for my painting. As always an extremely informative video Vince.

[@southpaw5483]

Thank you Vince. Going to try a "White Prime" followed by a "Dark/Black Wash" followed by a "White Dry Brush" to essentially create a "Contrast Basecoat" which may then have Contrast/Speedpaint/Glazes applied over.

[@imkycarsten]

Excellent Video, thank you. The part about the brushes alone is worth the watch.

[@VinceVenturella]

Glad it was helpful!

[@tdholman]

This video came out just a few days too late. I used washes with my nice brushes just recently. They are currently soaking in a solvent you recommended for brush care in one of your earlier videos. I am sure you mentioned not using them with sable brushes earlier, but I did not have sable brushes until just recently, so probably just ignored it. Thanks for the great video and continuing to teach!

[@1776huckleberry]

Do not forget to shake the devil out of your bottle of wash to make sure it is properly mixed and happy painting!

[@biowiener7825]

just as i was about to apply washes to my screaming bell, absolutely perfect timing toupload

[@fortu392]

Just what i needed! Thank you vince!

[@VinceVenturella]

Happy to help!

[@Paddzr]

I recently used a wash on a space marine terminator. I stopped using washes because of false perception of "liquid skill" and I wanted to push miniatures with layering instead. I wish I watched this video prior doing that, it would've made clean up quicker. What I learnt for sure out of this is the amount of paint used, 2 brushfuls or 3 for something like a marine is probably a third of what I used and the pooling has been a big issue. Thank you for yet another great tip video Vince!

[@whofreakincares1000]

Hey Vince great as always. Just wanted to let you know I’ve watched a bunch of your videos on how to highlight colors with ice blue and yellow. I’m big into painting armies so I gotta paint fast. My new method is priming warm or cold (something you taught me as well), air brushing my favorite base color (usually ninjons dark plum) then dry brushing your white blue or ice yellow. Then block out my colors with inks or contrast. Then as time goes on and I want to upgrade the paint job I go in and paint over those blocked in colors to finer quality and detail. It’s been great and is quickly rewarding visually

[@VinceVenturella]

Love it!

[@Slurgical_3D_Terrain_Channel]

Thank you so much! You are truly a rockstar!!

[@ajja638]

Great video!

[@Rafael-vu2xn]

Thank's, always much appreciated !

[@PhthaloGreenskin]

You can also mix your own washes by thinning down paint with water and mixing in some dish soap as surfactant. Nice for terrain and basing.

[@markgnepper5636]

Great stuff friend 👏 👍

[@TheAranan]

Amusingly, I just tried to paint Shalaxi yesterday while primarily using contrast paints. I was experiencing really bad coffee staining and streaks, despite using two coats of the relevant colors thinned down with some contrast medium. I attempted to re-layer over the streaky areas but wasn't happy with the result, and I concluded I was probably using the wrong tools for the job. Then I saw this video and your example of "bad for washes" model. :) I'm currently stripping Shalaxi and will reattempt painting with more care in mind, and perhaps using more traditional paints instead.

[@larrygarms7230]

Thanks Vince.

[@PrimalEdge]

I literally woke up this morning to head down to start painting and I’m at the stage where I want to start applying washes. I stopped to see what you posted this morning…..fortuitous! Great video as always.

[@VinceVenturella]

You got this!

[@Barry-Sweaty]

Thanks Vince!

[@yaboyscuttle]

Thanks Vince! i didn't realize I've been using too much wash

[@VinceVenturella]

Happy to help!

[@njkf]

Vince could you maybe as an addon to this video about acrylic washes do a product recommendation? Like you have done with Vallejo metal color for silver metallics and gsw gold pigment powder for gold, but for must have best washes (perhaps a black wash, a flesh wash, something for shading gold etc..)?

[@jakea3950]

Great tips! My tip if the day is dont be afraid to layer over a wash! So airbrush is what I use but lets say i havy wash ghouls or something and its too red or purple? Well build up a layer from the outside in. Thisnwill leavr some in the recesses and cover the tide marks or patches that are sitting on the flat surface. I kove washes,only gw paint product i use.

[@Darkgael]

found you on Ninjon's channel subbed and so far like your content

[@VinceVenturella]

Thank you, glad to have you along on the hobby journey!

[@madMARTYNmarsh1981]

It took using Pro-Acryl primer for me to realise why my washes had stopped working how they used to. As I gained more experience I started buying different brands of paints rather than G.W./Citadel and Vallejo. I started using Pro-Acryl and AK Interactive 3rd gen, the washes acted more as a stain. P-A Primer is absorbet (because it is matte) just like the paint, but because it was white primer, rather than coloured paint, I could see the colour change due to the absorption. Light bulb moment followed swiftly with feeling like an idiot because I didn't spot the issue earlier. Great video once again, Vince. Thank you. Edit* I see you playing with fire there, Vince; a wash bottle not in a holder while youre working around your camera set-up? You're either brave or wreckless 😂

[@DarthVZ]

Very nice video as always. But your keyboard, man... 💀 I can't unsee it

[@lumberbeangaming8805]

Thanks for the video. I use washes frequently, but the one crux is on flesh, specifically muscles. When I apply it, the end result is floating muscles.

[@VinceVenturella]

Yep, it's fine for tabletop, but it's a challenge when you are doing something higher.

[@undermuh]

King is back

[@njkf]

The straight technomancer vincy v

[@evilfuzzydoom]

This came out just after Sonic Sledgehammer’s video comparing dark brown washes - such a funny coincidence.

[@davidschneider5462]

Thanks for the video. Until recently I thought I was just one of the few old farts that still used washes. It seemed that the process was hardly ever mentioned. I find it an essential step for painting an army rather than individual display pieces.

[@TheEnd]

Wadup Vince!

[@RichardReads]

Whenever I watch Vince, the legend of the inter webs, I need to WASH myself off cause he’s the best looking host on the web. ❤ (Great video again)

[@Galnar]

I'd love a video on which washes are worth their salt. I've been using Vallejo washes but as far as I can tell people online seem to rank those very much at the bottom end of the scale of washes

[@christopherheintz2634]

The Vallejo washes have a very different use, they're great as filters and streaking, not so good for panel lining and 'all over washes' that we army painters tend to use them for. They were designed for scale model tanks and stuff.

[@christopherheintz2634]

And if you're talking about the Vallejo game washes, yeah, I never had much luck with those. :-/

[@Galnar]

@@christopherheintz2634 I see, thanks for clarifying, I had no idea they were for big stuff!

[@VinceVenturella]

Yep, in general, Citadel (GW) or Army Painter are really my go-tos for this category.

[@Galnar]

@@VinceVenturella much obliged!

[@shockv100]

What do you think about putting wash into panel lines and deep recesses? Space marines will often have deep grooves and notches in their armor/helmet. Is it a good idea to just put some drops of nuln oil/wash in there to make it stand out or is there a better way? Thank you for all you do Vince!

[@VinceVenturella]

In general, something like enamel panel liner is the best option, or an ink with flow improver, something like that.

[@Charlieistaken]

When are we getting your intro on spotify?

[@terrydactyl2077]

Vince, I’ve noticed you use the Huge Miniatures additives a fair amount. I’m about to order their Slow Dry. Just wondering if you recommend their paint thinning medium and their flow improver as well because I’ll switch to them for all my needs if their good. Is the flow improver also a good flow improver for airbrushing as well? If you see this thanks Vince!

[@VinceVenturella]

Yep, great stuff all across the line.

[@terrydactyl2077]

@@VinceVenturella cheers! Keen to try em out

[@Lilybun]

So if I add some flow improver to the wash I'm panel lining with it would work even better? Maybe even worth changing the shade formula to be a bit less medium bit more flow improver for lining shade purposes? Sweet.

[@JakeDogg-RIP]

Get a black(dark) oil paint and some odourless thinner for panel lining 😉🥰 so good for it! I think there are some enamel options available at most hobby stores also (not GW tho) 👊🍻

[@Lilybun]

@@JakeDogg-RIP I got an oil pin wash setup but I much prefer working with acrylics. Oil paint and its (odourless) thinners are quite unpleasant chemicals and hazardous to pets (my parrot likes to watch me paint)

[@JakeDogg-RIP]

@@Lilybun ah, yeah I understand that. I just prefer the oils coz it’s so much faster and better results too for the time spent, but it can be a mess sometimes too. Hope u got some good tips from vincey! 🥰🍻

[@VinceVenturella]

Yes, if you're sticking with acryllics, then something like upping the flow improver will step it up a notch. You could also check out the recent Tron Tau video I did for more tips on how to cheat with panel lining.

[@Fortunes.Fool.]

So you don’t recommend GW’s technique of “put brushfulls of wash on a palette so it dries out quickly, slather tons on the model so you have to touch up 90% of the model with more layer paint, and leave the pot open so it dries out quicker too” method? 😂

[@IanGerritsen]

My problem is I tend to swoop when I think I actually need to swoosh, and swoosh when I probably need to swoop.

[@wischfulthinking]

You used p3 inks? Only p3 paint I use but they’ve been great for me.

[@VinceVenturella]

Never really used their inks, they have very nice paints.

[@tychay]

Are you sure flow improver has much/any surfactants in there? I thought it's called "airbrush flow improver" because they add retarder to prevent tip dry. Golden sells a separate product (which they now call wetting agent) that's basically surfactants. In the past people used gloss varnish or quickshine in their homemade washes because they contain surfactants that are designed to level the polish when drying. The fact that commercial shades/washes seem to dry a bit glossy make me think something similar is being used there. In any case it doesn't change the tips since there is definitely something there to break up the water surface tension.

[@alfyb4512]

I think the word you’re looking for throughout this video is “relief”: characterized by surface inequalities.

[@brayandeutsch6577]

By making your own wash or referring to the future floor wax and black ink trick which was magic and for those of you don't know what that is and want to make a really really simple wash for miniatures that don't have a lot of detail and you don't have a lot of time to paint you take one bottle of Vallejo black ink and a bottle of Future floor wax and it's probably called something different you put that bottle ink in the future floor wax and then you either dip the miniature in it or you apply it and you have magic it's an old historical trick

[@christopherheintz2634]

Ahhh future/pledge dipping. That takes me back. I feel like the army painters cans (not bottles) of dipping 'stufd' are the closest there is to that premade.

[@TheKillerkadoogan]

Love this dude's videos but his demeanor is like a professor who's delivered this lecture 100 times already and you know you better not ask any questions

[@VinceVenturella]

I try to bring the real assistant professor at the local community college energy to the videos. ;)

[@eriktruchinskas3747]

If you close your eyes michael scott is teaching you to use contrast paint

[@NegativeNezzy]

Hey Vince, I'm brand new to the hobby (I've painted literally 5 miniatures so far) and I have something that I'm really struggling with so I figured I'd put it in the comments of your most recent video because maybe you'd see it. Basically, I'm having a lot of issues with removing those leftover sprue bits that are left when you cut the mini from the sprue. I've actually been very pleased with my painting progress thanks in no small part to you but I keep messing up and either over-scraping / sanding it or under. I event watched Ninjon's video and I just can't replicate his ability to sand down the nubs with sanding sticks without obscuring the tiny details to the left/right of it. Particularly edges, I have a really bad time of not rounding off edges that should be sharp. Any help you could offer would be enormously helpful.

[@VinceVenturella]

So part of it is just practice. i have a beginner playlist - so definitely go check out that playlist, it has everything you need for your first 6 months in the hobby. Now, some options. 1) You can get a finer set of nippers. You don't need to go crazy, but a solid, flush sharp set of nippers from Tamiya will be able to get you a nice flush cut that you may not even have to sand. 2) Use a lower grit sanding stick, you want something like 200 or 400 so you can work it away very slowly (you can also cut them down to work smaller). 3) your exacto knife is your friend. Soft gentle scracthing with either side of the blade (the sharp side or the back) can help you work that down more carefully. Hopefully that all helps.

[@WhizzBhizz]

Are you aware of any washes for lightening recesses? For a quick internal glow effect?

[@VinceVenturella]

So the challenge here is it won't work. I had a very early video about this, but inner glow actually glows, so it needs to travel out. Inner glow isn't a quick effect sadly. Now, that all being said, if you are going for a bright in the recesses, you want someting like a white ink thinned down and then tone the color over the top.

[@Croatoam97]

Would applying a gloss varnish to a model before using a wash enhance its effect of pooling into recesses?

[@VinceVenturella]

It can help it run and prevent staining to some degree, but it can also enhance some of the brush stroke streaking since there is nothing for the wash to grab onto. It makes it a challenge, but can be great for things like oil washes.

[@Fentan99]

Hi Vince, what wet palette are you using these days?

[@VinceVenturella]

Game Envy, I need to do a full review, I love it, especially the new sponge and paper.

[@420alphaomega]

Hey Vince can you recommend a good airbrush varnish? I had ak interactive but they have some horrific controversies

[@VinceVenturella]

Ammo by Mig makes a good replacement.

[@Mikey__R]

I find acrylic washes are easy to get a good result, but difficult to get a REALLY good result. It's why I've shied away from Contrast style paints.

[@Nigredos_subjective_Tedtalks]

I would love to see you put some time on a battletech model or 2... ***Thumper eyes***

[@VinceVenturella]

SO here is the problem. I love (LOVE) battletech. I've loved battletech for 30 years. I hate battletech minis. I have no desire to paint that scale and the minis are generally bad. It's a problem.

[@brayandeutsch6577]

I have a silly question how do I wash and color to like a tank like a tiger tank in 15 mm or in 28 mm for like bolt action would it be better to use army painter like a black and brown wash mixed together and just keep it moving and then just clean it with dry brushing and layering or would it be better to do a pin wash

[@VinceVenturella]

It's not a silly question, tanks and similar items with large flat surfaces just aren't made for washes, they don't work, it's a worst case scenario. You want to go to something like an oil wash (which I have previous videos on) or a panel liner and do a more pin washing technique in the panel recesses.

[@tychay]

Maybe you can just apply a light poke of the wash directly to the panel crevice and let the capillary action pull it along the edge? Then you could clean up the pigments that lapped over onto the top surface very easily afterward. (I don't do models so I'm just guessing here).

[@dannythompson9642]

👍👍

[@patmunro1982]

I always find, to me, they dry rather fast and I think I may overwork them as almost without fail they seem to get almost 'tarry' thick and gel like and seem to rarely move to recesses and just kinda blob mostly where they are put. Should I just slop them on all over and just leave it? Am I working it too much because they seem to be already drying and not going where it is supposed to? I have used them both on things like space marines and battletech mechs. Mec hs tend to have flat plates but deep recesses between them, would I be better off trying to only pin wash them?

[@VinceVenturella]

Yeah, the key is the larger brush and working quickly. Once they are getting gummy at all, you have to stop, you want to spread it really thin across the model.

[@piotrcthlu]

Any way around glossy finish? It really puts me away from washes. Matt varnish? If so is rattle can Matt varnish any good? I don't own an air brush yet. I probably will get one eventually but not at this point in time

[@VinceVenturella]

Good shake and mix before application will reduce it. You can also ultra matte it down at the end.

[@piotrcthlu]

@@VinceVenturella thank you, gonna try today 🫡

[@shanatokisaki4596]

You said washes do not work well with areas like flesh, Does this include flesh wash colors specifically Proacryl's flesh wash? also if you have used it what is your feelings on it? I have seen that its a bit more pink/red then other flesh washes which makes it look more "alive" I think, But I have never used it myself.

[@VinceVenturella]

Flesh washes are a strange thing, on small areas like a face, with lots of details and recesses, they can be a game changer, especially when starting out. Across the larger surface of the body, especially on female figures, it can often just cause coffee staining. It's a challenge. Thing slike the pro acryl flesh wash are great, but they need the right area and the right figure.

[@marcogarripoli9405]

❤

[@chadamir]

When I do a zenithal, the upward facing recesses will often be white as well. The solution I've read for this is to apply a wash after zenithal, but as you said, you end up with unnaturally dark recesses. Is there a solution or is it just a limitation of the zenithal plus contrast paint technique?

[@VinceVenturella]

A very soft thin wash can help, those upward facing recesses will still have some slight shadow to them (basically the mid-tone), but yes, it's one of the challenges of the technique, so you just have to balance it out.

[@mugetzu]

Are washes and products like Army Painters SpeedPaints the same but just different branding by companies?

[@VinceVenturella]

Army Painter has washes. Speed Paints are something different, those are meant to compete with contrast paints, they have much mroe pigment and can be used in similar ways (similar rules apply), but will have a stronger effect.

[@jasonfrank2935]

Is it better to use washes at the beginning or the end of painting?

[@immurelol]

Generally you want to do it after your base colors but before doing highlights

[@VinceVenturella]

The answer, like all things in painting, varies with your goals. If you're just starting or early in your journey, then yes, effectively after your base colors/tones are in place. Then you highlight and clean-up. If you're using them in a more advanced way, they can be applied later in the process, but that is a whole different video. :)

[@MorrowindES17]

Could washes be good on bolt action mini warlords games ww2 solders etc oh and space marines just learning about this stuff.

[@VinceVenturella]

Absolutely, washes are simply a tool to darken recesses, they have alow pigment count and flow improvers, they are meant to put over the whole figure, or an area of the figure, and flow and gather into the recesses, lightly staining the flat areas, but significantly darkening the recessed areas of a miniature to create more definition.

[@markomaksimovic1846]

I recently bought vallejo brown wash, and models after applying it got the glowing effect, is that normal? I don't like it being glowy. Any help :)

[@VinceVenturella]

Do you mean glossy? That generally happens because it wasn’t shaken well enough. You want to always give washes and such a strong shake or they will come out glossy.

[@markomaksimovic1846]

@@VinceVenturella Thank you! I figured out that when I also mix it with a bit of water it comes off better. It's rather hard to get the proper shade on Yellow marines. but I'm getting there. :)

[@VinceVenturella]

@@markomaksimovic1846 I have several videos of painting yellow figures, especially yellow marines, so check those out. :)

[@nnnnnccccc]

does anyone know what he say in the intro about the technomancer and technique?

[@VinceVenturella]

It's ninjon doing a funny little rap from their podcast. :)

[@MultiVaevictis]

Merci pour la vidéo

[@robertlemaster156]

What is the difference between speed paint and washes?

[@VinceVenturella]

Speed Paints are more like contrast paints, they are more pigment rich and meant to fully tone the model to that color. Washes have very little pigment and are basically meant to not change the flats and only gather in the recesses (ideally).

[@blackandgold399]

In all prepare

[@chickensandwich1589]

Is it just me, or are the new GW shades much more glossy?

[@VinceVenturella]

Haven't noticed it, but you have to really shake them, that will reduce the chance of gloss.

[@B1-997]

So washes are a no no for tanks like the Tau Hammerhead?

[@VinceVenturella]

Correct, worst case scenario.

[@Alf_Hairy-arse]

Get yourself a panel liner

[@B1-997]

Thx!

[@davidschneider5462]

@@VinceVenturella I see your point, but I've used a very thinned down enamel desert yellow as a dust wash on tank tracks and lower hull with good results.

[@VinceVenturella]

@@davidschneider5462 THat would be an enamel wash, not an acryllic wash. That is a horse of a different color due to it's workability time, same would be true for oil washes.

[@MorrowindES17]

I still dont understand what there supposed to do washes i have lots them barely used them I would like to use them for warhammer.

[@VinceVenturella]

Mentioned this in your other comment, but - Absolutely, washes are simply a tool to darken recesses, they have alow pigment count and flow improvers, they are meant to put over the whole figure, or an area of the figure, and flow and gather into the recesses, lightly staining the flat areas, but significantly darkening the recessed areas of a miniature to create more definition.

[@TheGamerZapocalypse]

All those make-up brushes, as nice as they can be for painting soak like nobody's business and are a real bear to get clean.

[@s2korpionic]

11:48 and that's my f*cking problem with the newer Citadel shades. They're so WEAK! I want them to tint and darken the area I've shaded! I WANT that high contrast in my miniature. The newer shades aren't doing that, and I have to rely on their contrast paints!

[@VinceVenturella]

They are much weaker, which can cut both ways as you mention.

[@poulsentyler]

In the words of Miniac "Washes are for bitches" 😂 which I had actually kind of come to live by but my question to the God that is Vincey-V is. Do you use washes in your competition pieces? And what if you struggle no matter what you do too make it not look like you used a wash all over but it just ruins your model?

[@VinceVenturella]

I don't all over wash anything really anymore, but I use washes quite frequently, even if only in basing or similar rough textures. I often use them as thin filters or to add tones or something similar.

[@deliciousrelish]

All about how to wash your stinky miniatures