Replace the Belt on White Knight Tumble Dryer & some others Crosslee, Bosch etc

[@cste2003]

Thanks, this video was a great help fixing my dryer, easy to follow and understand. Also purchased the parts needed from your eBay store easily.

[@georgethompson9145]

Firstly thank you for your series of repair videos which are very helpful. Secondly although it is likely too late to help the two posters asking about the C38AW below I figured it out while replacing the capacitor on mine yesterday. The motor fan is held on not by a circlip but a sort of washer with six slots which are forced down and into the slot the circlip would normally sit in. I couldn't really figure out how to get the motor fan off without destroying the washer but then thought to look at the bottom of the dryer where I found a removeable 4- screw panel which allows access to the electrical side of the capacitor and the motor pulley for removing the belt. Turning the machine over again and removing the screws of the back panel there is just enough room to get your arm in to remount the capacitor to the bracket, I managed it okay but the pressure pushed the blades on the motor fan up a touch and had to push them down into shape again as they were rubbing on the housing when I initially put the cover plate back on. But it all went well and the wife is happy again which is all that matters really.

[@How-to-repair]

Iam Glad we could help you. My Ebay Shop rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fstr%2Fhowtorepair&campid=5338676951&toolid=20008 If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel kzbin.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. KZbin. kzbin.info Facebook. facebook.com/how.to.repair.appliances

[@thomassayburn1111]

How do you take off fan on the Cl300 model to fit belt

[@MrGafferjim]

Why did you need to uncouple the wires from the switch if you're just changing the belt.?

[@MultiSpenner]

thank you for posting this.im fitting ours today...with confidence.

[@How-to-repair]

Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel kzbin.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. KZbin. kzbin.info Facebook. facebook.com/how.to.repair.appliances

[@desipindu420]

I have an old CL 767 SV model of the WhiteKnight. All works fine. I want to change the drainage option from external pipe to Internal bottle. I do not know how to do it. I have downloaded the instructions and service manuals but none help actually instructing me on how to actually change the option. Inside the dryer there are two pipes - Blue pipe which is leading to the bottle and the Red one is connected to the same valve which leads to the water pipe outside of the dryer. Well, how do I make the dryer to route the water to go to the Bottle? Your help would be much apprecaited.

[@silverbacksworld]

Hiya, I’ve been given one by a friend who!!!! Didn’t take a picture, could you share that picture so I can see which colours are connected. Have a wiring diagram, but need to double check till I’m happy it’s right. Cheers

[@botrm]

Very well explained, thanks.

[@How-to-repair]

Very happy I'm glad I could help you please remember to subscribe to the channel as that's what keeps us going and able to make these videos for you

[@godfredomane3464]

Excellent. Very useful. well done Paul

[@How-to-repair]

Can you do us a favour and please share this video on your timeline Facebook twitter etc . This will help other people who can’t get engineers out to help them. kzbin.info/www/bejne/qHfceHR-i6uIjZo&t facebook.com/how.to.repair.appliances/ Stay safe

[@markjennings2728]

So useful I’ve changed the belt just now on mine!

[@How-to-repair]

Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. kzbin.infoUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm and this is for you kzbin.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

[@mrcampertalk-u6r]

my hotpoint tl52a is making a grating noise comming from the dryer please help me fix it

[@paulaobrien3918]

those are way better than those recalled hotpoint dryers

[@hotpointbrownlover3365]

they are better than these recalled hotpoint dryers

[@gracejacks8083]

Hello I have a white knight gas tumble dryer can I change the belt or motor myself Thanks

[@domonickconnor3391]

Does this video apply to the smaller white knight dryer the vent hole is on the back at the bottom left corner and on at the bottom right hand corner there is a propeller on a shaft that is behind the the smaller back panel where there heat element is. If u think u can help me and need more info on the appliance feel free to message me thanks

[@AshtonLancaster-so9pn]

Abit l8 but if you angle the back panel u can slide out tje drum and hook the new belt over the motor and rpund yhe drum and slide it back in with abit of a wiggle 👌

[@davidfennell7867]

WANTED TO KNOW HOW TO DO IT ON A BOSCH TD WTN85200 GB .

[@highlanderchris68]

I noticed you have changed the machine when you hoovered it out, motor is different and the capacitor too

[@rossdrummond5969]

Maybe he recorded the how to replace the motor and capacitor video at the same time?

[@corallaroc]

I took the back off my white knight model (C38AW) by removing about 400 screws (without an electric screwdriver🙄) but down at the bottom corner where the fan thing is, it wouldn't come away. It's like the rod that goes from the fan into the other bit (whatever that is) is bolted in? Dunno and I know I'm not describing it very well! I don't know if I just need to tug it harder or if it is actually bolted in. Any ideas?

[@nathancato2442]

I have the same problem. Did you ever find a solution?

[@drewskidmore627]

Really helpful. Thank you.

[@How-to-repair]

Glad it was helpful! Thank you for leaving a comment this is for you kzbin.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

[@paulaobrien3918]

those dryer very well

[@TheAggroculture]

sound mate.thank you👍🙏

[@How-to-repair]

No problem 👍 glad it helped you @TheAggroculture this is for you kzbin.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

[@TheAggroculture]

Will pass your name on👍superb after video by the way!

[@peterdoyle5837]

thanks very clear and useful video helped a lot.

[@How-to-repair]

Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel kzbin.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. KZbin. kzbin.info Facebook. facebook.com/how.to.repair.appliances

[@paulaobrien3918]

nice dryer

[@TheDaveBarronBand]

thanks. that was really useful.

[@dmar1904]

Thanks good video and helpful 👍

[@How-to-repair]

Iam Glad we could help you Please remember to subscribe to our channel kzbin.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. KZbin. kzbin.info Facebook. facebook.com/how.to.repair.appliances

[@epicwarrior-nw9mh]

Hi