HP Officejet Pro 8710 HOW TO UNCLOG PRINTHEAD

[@BestPrinters]

Best Printers Cleaning Kit: geni.us/wArXsZT

[@amgooder]

Why is kit no longer available? Is there any other you can recommend?

[@margypezdirtz6259]

I watched the video, did what it said and WALLAH! my printer is fixed. And, by the way, I'm a 76 year old woman - if I can do this anyone can. Thank you so much.

[@EmmAyeVee]

Voila*

[@nicolethurlow7661]

I was so skeptical. Didn’t think it would be as easy as it looks. I was wrong!!! Thank you 😊

[@BestPrinters]

Glad I could help!

[@perttiexx5961]

Thank you for the video. I recommend that the latch should be returned to its original locking position while working with the printhead. The printhead compartment starts to move back to its home position after a while. If the latch is up, it becomes stuck which may damage the printer.

[@jacquelinedigenio4290]

The Magenta ink in our HP Officejet pro 8710 was streaking, so I did a search online to find a DIY solution and found this KZbin video. I ordered their product off Amazon and followed this video's instructions and it worked! No more striped print-outs and now I know how to solve this issue in the future. I ended up cleaning all the colors since I had everything taken apart anyway (5mL each, then another 10mL to clear off the back and bottom of printhead) and still have solution to spare. Another user commented that you should put the latch down after you remove the printhead, and I wish I had read it before because I had a bit of battle trying to get the printhead to stop moving. I eventually got it back to the position needed to reinstall it and the ink cartridges, but not without yelling obscenities at it for a few minutes.

[@richardlyko7060]

I normally don't review products, but had to say how well this worked for me. My black printhead was totally clogged. When I first pushed the plunger on your syringe, it didn't move. I pushed harder, and the ink clog cleared instantly. The printing now looks beautiful.

[@ErnestCurry-h4m]

Thank you very much for this video and your cleaning kit. I ordered the kit and it came in 2 days. I followed the instructions on using the cleaning kit. I only cleaned the black ink reservoir. I let it dry overnight then reinstalled new black cartridge. Worked perfectly!! Thanks again

[@BestPrinters]

So happy to hear that! Thanks for watching and supporting the channel, and I'm glad the cleaning kit worked out great for you!

[@bigwillie2051]

​@@BestPrintersPlacing water on the chips on the printer head doesn't damage the print head?

[@TheCourtOrder]

YES YES YES!!! Thank you for this tutorial and the link to the cleaning kit! It worked and I'm back in business!

[@BestPrinters]

Awesome!

[@GeorgeLopezEP]

Hello Best Printers. Happy to say that I just revitalized my 8715 printhead following your direction and printhead cleaning kit. Worked like a charm! So thankful that you saved me the cost of a new printer...and now I am using the oem ink that costs much less and I cannot yet see a difference in quality. (time will tell) I do suspect that my problems began when the black ink ran low. The color ink was not having problems. Thank you! PS, yes, close the latch! The assembly eventually does slide back to home when you are performing the cleaning process, even with the printhead out of the printer! Yikes!

[@BestPrinters]

George, i am so happy to read your comment. I am glad you were able to save your printer with these instructions! If you would like to show additional support you can leave a Super Thanks donation, you will find the Super Thanks button under the video!

[@hymanbraverman7369]

Wow, it worked. I was surprised, pleasantly! Thank you.

[@BestPrinters]

Awesome!

[@dannynull4410]

The color BLUE was not printing on my hp8710. I had to push pretty hard for quite a while before the blue ink started to come out. When I got it all back together the BLUE was printing fine. Thank you so much for a cheap solution. I was ready to buy a new printer.

[@BestPrinters]

Awesome I am glad you saved your printer!

[@lillymaggiolo2283]

OMG! U just saved me a ton of $$$$! so grateful 4 Ur video! I'm 4-ever a fan!!!!

[@jessezaragoza2586]

Totally fixed my issue.... Thanks (Wear gloves because it can get a little messy.... )

[@BestPrinters]

I'm so happy to hear that. Please consider leaving a 5 star review on Amazon. It would be greatly appreciated!

[@aprilgmail7216]

now you tell me. I look like a smurf.

[@phillipparker9321]

While doing this wear rubber gloves. It worked very well.

[@BestPrinters]

Yes!

[@solonfeedmillinc.5203]

Seemed to work. Thank You.

[@عهودموسى-س4و]

Thank you, I am grateful you saved me

[@BestPrinters]

Happy to help!

[@neonufos5297]

Worked perfectly! Thanks

[@BestPrinters]

Great to hear!

[@philipumba5117]

Thank You for the video ...Helpful...

[@BestPrinters]

Youre welcome! Thank you for watching!

[@maureenjmalyon3219]

Great helpful video!

[@dramonestover2783]

Thanks it worked

[@TheBlueMahoe]

what if you do not have a solution, can you soak, wash and set out to dry and re-install?

[@BestPrinters]

No, I advise using this cleaning kit: geni.us/wArXsZT

[@aloorchin]

After you cleaned with solution, I did not see you re-prime the colors with a syringe. Is that supposed to be done to clear out the cleaning solution that is still residual in the colored container of the print head? Or is just installing full cartridges and letting it auto prime the best way to set it back up?

[@NrykeSolis]

Waiting for this answer...

[@tnapper9011]

Thank you for this video. may I please have the link for the where to purchase the print head and a new printer and discounted ink.

[@BestPrinters]

Hi, yes I added the information below. HP OfficeJet Pro 8710 PRINTHEAD : amzn.to/2ZgOhzG HP 952 952XL Ink : amzn.to/31XLcGH

[@abushahlizanabuaman8241]

hi... i cleaned my printhead as per ur video... after cleaning, cldnt print coz ink depleted (cyan)... i replaced with a new one... still cldnt print... it says theres a problem with the ink supply system... tried replacing with with new cartridge... wont work either... u have any solutions?

[@BestPrinters]

The only other solution would be to purchase a new printhead for the printer.

[@abushahlizanabuaman8241]

@@BestPrinters That will be the last resort

[@tonyrossomando148]

Is ionized cleaning solution just ionized water?

[@BestPrinters]

No use only solution.

[@DianeChilds]

I was able to remove the print head and used the solution but after the “printhead holder” moved to the right, it won’t return so I can replace my new ink cartridges! How can I get it back to its proper position? Sure hope I didn’t buy new ink cartridges for nothing!😳

[@BestPrinters]

Oh boy! I dont think you can now.

[@laeunicechapman2070]

I have been using your method for the printhead, it worked however I have to use it a couple of times during a week. I have a HP OfficeJet Pro 8710. Purchased new ink & still have some problems. A couple of days ago, purchased refill for blue & magn. so I replaced each cartridge. Now it is saying that there is a problem with the supply system. It also reads that I should replace the affected cartridge with a different cartridge, but all of them are new (just 3 days old). HELP!

[@BestPrinters]

The printer may be at the end of its usable life, if you had to keep doing the cleaning weekly.

[@laeunicechapman2070]

@@BestPrinters Thanks

[@user-fz7ms9ds6y]

Not sure if this will fix my issue or not.. I am trying to print on printable vinyl, but the ink prints out wet and doesn't dry. Would this be a print head issue? Thanks in advance!

[@zsoltibitter8761]

I have bought a printer for cheap because it had the same printhead as my printer. But it was not used i think more than a year and the ink has totally clogged the nozzles. When i tried to clean it only the magenta passes a little bit of solution through. 99% of the printhead is clogged with dried ink. I have tried to submerge the bottom of printhead into hot water, then carefully inject distilled water with alcohol into it at all color locations but unfotunately the nozzles are completely blocked, i cant even inject the solution because of the air inside which is trapped isnide. I am afraid of pushing the syringe harder because i can tear the foil. Do you have any solution for this special case how to clean completely dried up ink from the nozzles? Thank you

[@BestPrinters]

Yes you can warm up the solution and then apply hot solution to the printhead.

[@rickhall8211]

where is the link to this cleaning kit you are talking about?

[@BestPrinters]

Here it is : Printhead Cleaning Kit: geni.us/wArXsZT

[@bhagwandeenlall8109]

I am getting "Supply System Problem" for my HP OfficeJet Pro 8710. I error came up after replacing the black ink. I try multiple inks. Only happens on the black ink.

[@BestPrinters]

The printer may be shot

[@carissasoodeen7780]

​@@BestPrinters what do you mean by Shot?

[@shaimesh1]

tried cleaner n still not working. Ordering printheads now !! thx

[@pattistrout8967]

You mention at the beginning a different ink available. Do you have a link? Thanks! I can't wait for the cleaning kit to arrive!

[@BestPrinters]

Hi, yes here is the link: amzn.to/3XkQbxo

[@cbre1971]

What does it mean when my yellow is printing like an orange or orangy brown color? I have tried 2 different yellow cartridges..thanks

[@yumpinyiminy963]

What is that cleaning solution? Diluted acetone?

[@BestPrinters]

It is actually ionized cleaning solution.

[@llpqazz]

Ionized what??

[@Westbankfireman]

@@BestPrinters but what IS the solution? Do you have the SDS available? What chemicals are in this solution?

[@marnaaqwa]

It works good ths

[@reginagray2419]

My printer keeps showing that my ink is low. I have purchased several ink cartridges and each one of them are reading the same thing. The ink is low. What can I do? Thanks.

[@selmaal-salam2688]

I'm having the same issue. New cartridges are reading low. All the colors were reported as depleted after one color was replaced. Finally the first color to be replaced read half empty when 3 pages had been printed since it was replaced.

[@tupac2672]

Thanks, let's go Brandon

[@BestPrinters]

Thank you!

[@KillerDCInstinct]

my hp 8720’s printhead is leaking so much ink from underneath the print head 🤦‍♂️ trash $130 to replace the printhead. might as well just buy a laser printer

[@BestPrinters]

Oh man

[@mahmoudharby7925]

Thanks

[@boucifnasni4870]

Traduire

[@margo6976]

Great video- I ordered and used 10ml on black. Now the printer is saying there is a problem with the supply system and it says to replace the black cartridge but the cartridge is practically new! Any ideas?

[@jbuckingham7167]

I got the same issue. Did you ever get it resolved? how?

[@IKSRTFO]

@@jbuckingham7167 same here, did u end up resolving it?

[@dwssklar]

Same issue with the Magenta, was this resolved?

[@anniegaignard9987]

Bought your cleaner kit on amazon, used it like in the video and still get the same Missing or Failed Printhead with error code: Oxc19a0003.... I did put the same cartridges that I refill at Costco every few months or so! Do you think that if I put in brand new ones in that I won't get that error code?

[@BestPrinters]

To be honest that code is very difficult to deal with. I dont reccomend putting any more money into it unfortunantly.

[@anniegaignard9987]

@@BestPrinters Yep that's what I thought! Thanks

[@BestPrinters]

No problem!

[@aprilgmail7216]

Didn't work. And now I look like a smurf. The blue isn't working and I tried to get the fluid through it, and it wouldn't move. It was also a real challenge to get the tube onto the syringe. I had to heat it up to get it on.

[@BestPrinters]

Did you run a printhead cleaning afterwards? Repeat the process until blue/cyan comes back.

[@dianerinaldi9156]

last time i used printer print quality was good. today i went to print and i am seeing error code 0x19a0023. the printhead appears to be missing , not detected or incorrectly installed. I have never touch let alone removed. does it need replaced ?

[@tigger31086]

I am having the same issue now! Did you ever get it resolved? If so, how?

[@nimerbushnaq7850]

Thank you my friend! i contacted hp to help me with my printer, it was printing only BW They DIDINT HELP AT ALL, i tried your method and it worked! FUCK HP "SERVICE"

[@BestPrinters]

Awesome!

[@munchkinelf]

The printhead did not unclog

[@BestPrinters]

Repeat steps as needed

[@jeffplamenig8478]

This is an absurd pain in the ass! No wonder no one bothers trying to repair it. Cheaper to simply buy a new one than pay for repairs.

[@representing50plus]

I dont know if they still make this but don't buy it. It doesn't print simple address labels and after 1.5 years it stopped picking up card stock that i use every day. I would not recommend.

[@DianeChilds]

I was able to remove the print head and used the solution but after the “printhead holder” moved to the right, it won’t return so I can replace my new ink cartridges! How can I get it back to its proper position? Sure hope I didn’t buy new ink cartridges for nothing!😳

[@BestPrinters]

Oh boy! I dont think you can now.

[@representing50plus]

I dont know if they still make this but don't buy it. It doesn't print simple address labels and after 1.5 years it stopped picking up card stock that i use every day. I would not recommend.