Husqvarna 136 chainsaw handle explanation

Husqvarna 136 chainsaw handle explanation, Some have been having trouble putting the handle back on, and it is a little tricky. When I first replace the band I did have trouble but after several attempts I got it. this works on the 136 not sure if it's the same for other saws. Also, this is what worked best for me you may have a better way if so would like to see it. Thanks for watching.
Replacement parts: Brake Cover for Husqvarna Chainsaw 136: amzn.to/39CZLsz
Film Gear Used:
IPad Air: amzn.to/3x5UpgR
Soft-box Lights: amzn.to/2Ezg6M...
AMIR Phone Camera Lens: amzn.to/2EwpT5...
GoPro HERO3+ amzn.to/3eOl8Xx
Editing Equipment and software:
PowerDirector 17 Ultra: amzn.to/3d7ZhcK​
Dell Latitude E6420 Laptop: amzn.to/2SHZc3...
MacBook: amzn.to/2yjlLm...
Zelotes Mouse: amzn.to/2LKwJJ...
Stay connected:
Instagram - / channel.ron. .
DISCLAIMER: This video contains Amazon affiliate links, which means that if you click on one of the product links below in the Description or in the video “Channel Ron” we’ll receive a small commission.

[@brucegilbaugh9100]

This is the same mechanism as the Poulan 2050 chainsaw. Mine quit working and after taking apart I was unable to figure out the handle reassembly which you show and explain so that I was able to restore the operation on my saw. No broken parts, it just didn't engage so thank you so very much for helping stay safe while using my chainsaw. As anniversary4 commented 3 years ago, your video is Quick, Precise, Clearly shot, and On Point to fix the problem. Thank you again!!!

[@Wheel-1]

Thanks for the video, I bought a saw that was a basket case & I was trying to put together with big spring in place... Exactly what i needed to see

[@jmooneynz]

Thank you so much! This was the only video which explained how to put the handle back in correctly. Mine is a Poulan 4218. Job done.

[@bullfrogpondshop3179]

Thank you for explaining what you're doing! I had been watching another video where the guy didn't speak. Great video

[@channelron3593]

Glad to help

[@Patriot-bn9om]

EXACTLY what I needed to know to fix my chainsaw. Thank you so much!

[@channelron3593]

Glad I could help!

[@frankjetton5605]

Worked on my 41. Thanks!

[@markstrain1642]

Excellent, I finally fixed this my McCulloch 2618CAV chain saw brake and handle spring with your two videos. This chainsaw sat around for months waiting for parts due to COVID19 shipping issues. It is a great relief to finally getting this little baby going again. Cheers.

[@channelron3593]

Nice work!

[@anniversary4]

Thanks for a quick yet precise video. Just the right emphasis on installing the brake handle. I'm fixing one for a friend and the brake was stuck on and then forced onto the machine. Your video showed exactly what the prior assembler did wrong!

[@channelron3593]

Thanks! Glad that I could help.

[@chaplainand1]

Thank you. I appreciate the verbal instruction as well as the physical demonstration. It will help me get things back together. BTW, God helped me find the spring - I didn't know there was a spring under that little cover. When it came off, the spring shot out into the woods. God is good all the time. No anxiety - just began looking among the pine needles and cones, after a prayer for assistance. The God I worship helps me even in the smallest of things as well as with the big things. Or as they say in AA "Don't sweat the small stuff. It's all small stuff". Blessings to you and yours.

[@tylerziehme4145]

I jad so much trouble this video was the ticket to finally getting it going

[@channelron3593]

Trust me I know it was a pain for me to.

[@Jolteon52]

THIS! God, spent a whole evening in the name of anger. And then I found this video. Thanks man 😎

[@rickliquori1717]

There is also a spring inside the brake handle could u please show how it goes in

[@channelron3593]

Hmm well Not sure if i still have that saw. I though I showed it I will take a look.

[@robinrispin2803]

Magic!! This simple clear guide ended several hours of frustration. Thanks!!

[@slamshed]

Super helpful, thanks for making this video. My trusty Husky 61 is up and running again.

[@channelron3593]

Glad it helped

[@slamshed]

@@channelron3593 Sure did, dropped a few burnt trees that did not recover from the bushfires on the weekend, could not have done it without your video.

[@stevenmcnulty7742]

Great video. Right to the point with no fluff! Thank you!

[@pmatrisotto]

There's a spring type thing that came out of the grey part of the handle on my 141 that I can't figure out how it goes in. I didn't see it come out.

[@channelron3593]

Hmm I thought I showed how it goes back in, I may have to revise this.

[@rickychatt]

Nice one man was scratching my head wondering why my brake kept vibrating on problem solved. Liked and subscribed

[@channelron3593]

Glad that I could help! Thanks for watching.

[@timsimpson5447]

Is spring in top handle held in by that pin ,I got my saw in a box of bits

[@channelron3593]

Yes I believe so, Putting someone else's project together is always hard, good luck.

[@Z-Ack]

You must have a weak spring because i cant get the spring squeezed enough to get it to fit in the slot like you did with a screwdriver.. mine when i got that last screw almost out the spring shot across the room and broke that screw hole out.. i have to put the spring in with the handle disconnected then wedge it in and get the little thing to hold it in place..

[@channelron3593]

They are a pain.

[@janreitsma2123]

The saw is only working if i constant put the handle backwards. Is it normal? And sometimes my handle 'clicks trough' and it doesn't work anymore. I can move the handle forward en backword with no resistance. When i open it the long spiral spring is on pressure en pussed against the cover. I replace the spiral spring and it works for a while, then i have the same problem. Is the problem in the handle? Should i remove the handle and place it over again or replace it with an new?

[@zezu4775]

Can you Know if this Cover it’s the same size for Husqvarna 36..

[@channelron3593]

Not sure ?

[@lincolnvlogs8965]

GREAT VID! RATHER THAN TAKE MINE APART, I NOTICED HOW YOU STOOD UP THE HANDLE AND PULLED BACK ON WHILE IT WAS SITTING ON YOUR TABLE.....THAT DID IT FOR ME. WITH A BIT OF FORCE, I MANAGED TO RESET. THANKS AGAIN. NOW TO FUEL/START IT!

[@channelron3593]

Glad it helped

[@markstrain1642]

I have a McCulloch 2618CAV with exactly the same design brake assembly. There is a spring inside the black hand that fell out onto the floor. How do you put it back in and what is its orientation.

[@channelron3593]

Wow! well without seeing it its a bit hard, not sure.

[@mikebullard8791]

worked on 257. Thank you. I don't see a patreon link--if you have one point me to it, otherwise, you need one.

[@channelron3593]

Thanks, this is the replacement handle if needed, amzn.to/39CZLsz

[@highmountainsbushcraft9714]

Amazing thank you so much Great video

[@nj-up8kq]

Great explanation, thanks!

[@channelron3593]

Glad it was helpful!

[@elitebowman5386]

Good video Ron. I was just trying to fix my Jonsered 630 Super chainsaw brake handle. It looks similar to yours. I took mine apart and cleaned it. My brake trips way to easy, even after I cleaned it. Can't hardly run it because it constantly trips. Do you know what would make it trip so easy? I didn't see anything wrong with the knee joint level arm. Any help would be appreciated. Thanks.

[@channelron3593]

Am not sure? sounds like the unit just may be worn out?

[@elitebowman5386]

@@channelron3593 I looked it over, all looks good, not worn anywhere. But will look at it some more. Thank you for the reply .

[@trueamerican3374]

Thanks...I was desperate and it worked on my 55 as well

[@M5tworude]

Thanks, that was a big help!

[@davidunger7425]

Hi Ron, great video. But could you show us how to orient the locking spring that's inside the handle? Mine fell out, and for the life of me I can't quite figure out how it's supposed to go back in. Thanks.

[@channelron3593]

Wow. Well without taking it apart again I am not sure :( I know this does not help you, I will try to show more detail on next video, sorry that I could not help.

[@davidunger7425]

Thanks Ron, look forward to that next video.

[@Yarrrmin]

Hey, I had the same problem. I found a video of a different Husqvarna model but with a similar chain brake. It helped me with putting my 136 back together. kzbin.info/www/bejne/rWWVpH2Hp8x0rK8 I don't want to promote another channel here. Just hoping it helps people :)

[@davidunger7425]

Yes, I also discovered that channel, was very helpful for my situation, now everything's back together and working! Thanks Armin.

[@davidunger7425]

Armin, I also stumbled onto that video, and problem sorted! Thanks

[@gordbanks9184]

how do i put back the spring that's up in the black handle

[@gordbanks9184]

There's a v shape spring up in the black handle how do i put it back?

[@amazonquest2012]

hi, can you help, the spring fell out when i removed the locking pin in the grey handle, cant put it back. do you know how??

[@channelron3593]

take a look at this video I replaced the brake band and show a bit about the spring, hope this helps.

[@phildecourcey7327]

Did you ever get an answer same happened to me!

[@watersideforge]

What do I do with the spring inside the black handle, mine has come out 👍🏻

[@pabloc8695]

Spring fell out of handle, tried to put back in but doesn't line up so no click could you show how and where the spring sits to push the break

[@channelron3593]

The saw is together at the moment not sure if i can help ):

[@walleyeye]

I have same problem. Need to know how the spring goes back into the handle. Good video but you don't show how the spring goes back into the handle. I'm stuck.

[@channelron3593]

I"m sorry try this video I talk about the spring a bit. hope this helps. kzbin.info/www/bejne/laipfKCojZlpg5I

[@tomaskozler4856]

2:09 why did you remove that pin at all?

[@channelron3593]

Mmmm its been a while not sure now why I did? have to watch the video and see, I hope it help you a bit, Thanks for watching.

[@fu420b9]

Thanks a lot!

[@АндрійСтрашук]

Дякую!А я довбався з цим тормозом,весь час ричаг упирався в руку.Тепер норм.hys 395

[@channelron3593]

Я радий, що можу допомогти! Дякую за перегляд.

[@davidswarbrick9645]

👍🙏👌

[@willf5768]

🙂👍👍👍👍👍👍

[@jontangenes9275]

For us who have trubble with the spring inside the handle: kzbin.info/www/bejne/rWWVpH2Hp8x0rK8

[@jeffreyferlotte6379]

Whata chinese design