I Made A Wall Plugs Removal TOOL! Anchors Remover | XDIY

[@XDIY]

👉Did you watch the ending? 3:36 Yes, I know... It's an overkill solution...😅, but if you'll buy an apartment with dozens of wall plugs that you need to extract, you'll thank me for sure 💪🏻🤘😉. So, what do you think about my idea ? 👉 Some of the tools & accessories that I'm using - www.itzikdiy.com/tools-list?m=1

[@kevinashleylewis]

Cool. But I just push them through and let them fall inside the wall. Or just repair over them. Not sure why they need removed.

[@XDIY]

At our apartment (like most of the apartments in my country), the walls are made mostly from cement blocks & concrete walls, so I can’t just push the plugs like in a drywall. (The demo in the video was done on a concrete wall) Thanks :)

[@AbuMaia01]

I'm actually quite impressed with the corkscrew idea, I'd never have thought of that one.

[@XDIY]

That's not my idea, but at least you learned something from the video :) :)

[@XDIY]

Oops, after publishing I noticed that I wrote 'challange' instead of 'challenge' (in the video) 🙄 😁

[@dan_rozen]

Genius! Creative and fun video 😃

[@XDIY]

Thanks!! 🙏🙏

[@deanr8110]

I'm adding a thumbs up only because I fear this black magic. 😳 The race had me giggling. Great job. VERY cool jig! 👍😎

[@XDIY]

Thanks!! 🙂

[@bobreese8831]

Well done, sir!

[@XDIY]

Thank you!

[@MASI_forging]

Really great anf creative 😍😍

[@XDIY]

Thanks! 🙏🙏

[@ericensley2427]

How many wall plugs were in ur new place to make u make a tool?????

[@XDIY]

Hi Eric, first I would like to note that at our apartment (like most of the apartments in my country), the walls are made mostly from cement blocks & concrete walls, so I can’t just push the plugs like in a drywall. (The demo in the video was done on a concrete wall) I know that it may look like an ‘overkill solution’ for this job… but it can be useful if you have a lot to remove. I like to challenge myself and try new tools and solutions :) so it was also for fun. In my apartment which we'll leave soon, I have maybe 100 wall plugs to remove so it may be useful. 😀

[@merav0909]

אלוף!

[@XDIY]

☺️😊

[@Deebo124]

Tap them in 1/8 deeper cover with mud three coats sand done

[@ZooyZoborne]

You can just push them into the wall. They will fall to the bottom. You don't need to take them out.

[@XDIY]

It's a concrete wall, not drywall...

[@Deebo124]

@@XDIY yeah exactly. Use sheet rock 45 or durabond 90.

[@XDIY]

@@Deebo124 Thanks. I meant that I can't push them into the wall because it's a concrete wall without empty space

[@MyChevySonic]

Faster to just get a thread or two of that long construction screw and just yank it out by hand. If you're a contractor, your hands should be up for the task. Although the other comment saying to just push them through is the common solution. Depends on the type of plug I guess. You're patching either way, so there's not really a point to cleanly removing it.

[@XDIY]

It's not drywall. At our apartment (like most of the apartments in my country), the walls are made mostly from cement blocks & concrete walls, so I can’t just pull them by hand...

[@normabeatrizmarin2896]

Solo los que ya lo an hecho lo entienden / imposible entender

[@dror-krief]

וואו אחי אהבתי את סוף הסירטון אחלה רעיון 4:14 מאיפה ההשראה הגיעה? 4:14

[@XDIY]

תודה אחי! זה רעיון שחשבתי עליו... ראיתי בפייסבוק כל פעם שאנשים שואלים איך לשלוף דיבלים, אז כמובן שיש את השיטות הרגילות, אבל הרבה זמן ניסיתי לחשוב על רעיון כלשהו שיעשה את זה מהיר לכמויות גדולות... כשיש לי ג'וק בראש, לא יכול לעצור עד שמנסה ליישם :)

[@zaprodk]

*challenged.

[@XDIY]

Yes, I noticed the mistake after it was published 😀 See my old comment... 🙂

[@Woodwerker]

Why 😮

[@orisaig]

חחח גדול

[@XDIY]

😃 תודה