I passed the Master Carpenter Test

[@johnlattanzio9859]

Hey Richard I don't know if you will see this but I have been watching your videos for about 3 years now since i started doing carpentry and woodworking, I don't ever comment but your worth it. I really admire your passion for our trade and want you to know that all the hard work you do is noticed and you are one of the few carpenters/youtubers that really drew me into the trade along with Essential Craftsman, Perkins Brothers and a few others. Your videos have come a long way man and have had a major impact on me and I genuinely thank you for all the great tips you have shared and headaches you have saved me from lol. I hope you and You're family are thriving brother🤘. Keep up the good work.

[@Justforfun-ek7et]

Heck yeah, man. Agreed! Very well said.

[@mim2046]

So you like being a hack? 😂

[@tetreaulthank4068]

Love seeing these higher end period moldings and would love seeing more of the same, you are correct in feeling others possibly 100 years from now wondering who along with just how 😊had produced those beautiful Georgian moldings ! You should be proud of what you’ve left for others to see , beautiful workmanship indeed 👍👍

[@roryt3366]

What is a hack

[@justinpowell2460]

Don't know if the "hack" comment was in jest, but as an electrician, I can tell you I've seen "HACK" work across the trades. Richard is NOT a hack. All my residential work is in custom homes, multi-million dollar homes. Nobody takes this much time and effort to not only produce quality but also show how it is done. Nobody works hard at junk work. Sometimes the high quality finished product is really simple to achieve. Sometimes it's an engineering mess. Never equate simplicity with quality. Excellent channel/work Richard.

[@lisaferrara8120]

I really appreciate your generosity in showing us your tricks and how to do what you do. Phenomenal craftsmanship!

[@jwar2163]

Very nice work on matching the old school trim and mouldings / millworks. Our predecessors really knew Their Craftsmanship and took Pride in the Art of the Trade. As do You Richard, and hopefully Your videos will reach generations to come. Remember this saying Knowledge Horded is Knowledge lost. I for one am glad You are passing that knowledge on.

[@deucerider430]

Your love for, and your interest in the “how’d they do it” will keep beautiful designs going for many years! Thank you, Richard! I grew up working in a Victorian-era hotel and used to marvel at the artistry and design.

[@klmbuilders5385]

Richard, you think like I do and I've been in the trade for 40 years. I saw the drill bit coming before you said it! It's nice to see a young man with such a love for the difficult aspects of our carpentry.

[@betods1013]

I was thinking the same thing but with a drill press.

[@billj5645]

@@betods1013 And maybe a fixture to hold the molding and a piece of wood with a hole in it to hold the bit in position.

[@christopherpavlicas]

@@billj5645 I predicted the drill bit solution. Honestly, I thought that was obvious. I would have liked to see him execute the cut "drill" and how he supported the workpiece . It would be simple using a drill press/table, but I don't think he has one on his truck lol.

[@john.upchurchiv]

definitely have a carpentry kid looking at your videos getting inspired. i’m 17 and plan to take on this career! this is awesome bro thanks 🙏🏽

[@clayjones553]

My advice as a contractor of 3 years.. get on with a home building crew and learn everything you can for 5 years accumulating tools the whole time. Then start your own solo home improvement business.

[@cuttnhorse2013]

Richard, like others that have followed you over the years it’s amazing how much great work you have done through the years! I’m 68, built my own house, cabinets,trim and all the wood. No air nailer was on the place. But you young man are the best I’ve ever seen. Now retired, from renal cancer, chemotherapy, with a lost right kidney. Don’t do work like I did, but just wanted to let you know how good you really are! With all the admiration,great is a blessing god has placed you where he needed you. Ronnie,East Tennessee

[@robinrummel1359]

Beautiful building and beautiful molding and trim! I also look at old architecture and marvel at the talent, skill and time needed to create by hand what is difficult to duplicate even with modern tools. You have shown you aren't just a master carpenter, you're also a master craftsman. They made a wise decision when they hired you for this job! 👍👍👍

[@202shadrach]

I love the absolute simple beauty of that Pencil molding. Your's and John's idea for the cope..... that's why you guys make the big bucks! (don't we wish!) Seriously though brother, your solution for the coping was genius. Keep up the great work brother. Praying for you and yours.

[@PRBImages]

Cut thin strips of the same board and glue them over a bending form. Keep them in the same order as you cut them from the board. That'll keep the grain direction, color, etc. consistent. THEN route in the profile. Boom. Done.

[@waynemiller6070]

It’s funny, as you’re explaining how you’re doing stuff. I’m nodding as if to say well yes, of course. I make myself laugh, because if I had to figure it out without being shown, I’d be shaking my head going “how do I do this?”

[@kirkhepburnmiddleagedwhiteguy]

Seriously geeked out over this brilliant bit of excellence in carpentry detail. Well done!

[@scourtwright]

Did my first project to install baseboard around an obstacle… followed your instructions from another video and it worked perfectly! Thanks for the videos!

[@hyeater98]

Been here since beginning and will be here til the end. Believe me, I'm young finished carpenter for 4 years now and you have gave me the ability to show up 30-40 year old men on site. From accent walls, coffered ceilings, wainscoting, and regular or basic trim. I love the creative and ornate side of interior trim so much that's what got me hooked. Then coming across you, you really gave me the passion I have. So thank you, Richard. Your efforts are definitely working. Make the trades fun again!! @finishedcarpentryTV

[@chrismullin8304]

Honestly. The best Carpenters, Fabricators, Inventors, etc. are just better problem solvers.

[@gtjr1975]

Amen, I am a high end finish carpenter and I always say the only difference between me and the next guy who has same saws and tools is problem solving and the way I tackle a project. And a few tricks…😉

[@fcolon4]

True story

[@upstateplumbing9995]

Dont forget plumbers

[@brianworland4858]

Fact

[@ryananthony4840]

That's part of it, but they also have a huge skill set.... and a strong mechanical aptitude

[@Ao51635]

Dude I have been watching your content since 2016. It’s amazing to see how much you and John have grown in skill through the years. I remember a time when you where almost strictly and mdf carpenter. You and a few other content creators have truly helped me better my skills.

[@joeschmo1935]

You have always been the best master carpenter on KZbin

[@clemejuan5296]

Totally agree!!

[@terrynicoletopoulos5797]

Genius Richard. Very impressive. I would have been messing around with a coping saw forever and still would have gotten it that perfect!!

[@jeremygricar4361]

When you mentioned having to cope the circle, I imagined how Colin furze uses a hole saw to cut radiuses in round piping for when welding.

[@Niels_Dn]

Lol I had exactly the same, thinking of that method done with a drill press and a one inch drill somehow

[@allansheehan2033]

Young or old, experienced or beginner, your videos are inspiring for all those that have this desire for this level of carpentry !! Thank you for your passion !!

[@bennybodash855]

You do stunning work and you take good pride in your work. Not many care about the work they do. I say thank you to you sir, your awesome! Congratulations on the Master test!

[@sarabates2046]

We always learn something watching you Richard. This house is amazing, what a honor and privilege for you and your skills to be considered for this job. Walk worthy and stay humble.

[@garyhenderson9303]

Richard maybe a younger version of you will watch this film in the future and get inspired, but right now an old me looks at this and gets inspired

[@JimmyLee0757]

You have an amazing gift and your willingness to share it COOL. My Bride and I love visiting old places and I usually spend my time admiring the craftsmanship and wondering how they did it with, pretty much nothing to work with. Thanks for taking us long for the ride.

[@fmort210]

I am not exactly the next generation, but I used your videos to do my house, and found out I loved the work. I am about to retire after 26 years active duty and looking into getting into exactly what you're doing. (Maybe not like some of your advanced stuff.. yet) A huge part is thanks to you and your channel.

[@yohanathandowns9057]

I'm 32 and spent all of my 20's in a factory. I did random side jobs for years with a carpenter buddy and found out I was pretty good at it. I'm on my 3rd year working for myself as a Trim carpenter. I love it

[@lolaottinger3038]

I am in awe of how much you’re in awe about all of the exquisite trim/moulding in that home! I sure hope y’all get a tour and actually a thank you party for all of the people doing the restoration of home, it would be so awesome to see it all finished and furnished. I think this will be a dream job/opportunity for an interior designer, I envision trips to Europe……I’m so proud of you Richard, and John too.

[@KevinStreet510]

Great video as usual, Richard. Thank you for sharing. I enjoy seeing historical and older homes. Seeing all the custom mouldings, craftsmanship and overall ideas and style. You deserve to be there.

[@paulstanando1975]

Love it, love your channel, I'm bricklayer by trade (18 years) but I went to collage back in the day to do joinery, my level 3 . Love your passion. 👌

[@torridice]

Neat idea on the cope. I was thinking you were going to just run the end into a 1” router bit.

[@Gandrolok]

That's what I was thinking. I bet he could get an even more precise cope this way.

[@emerald-goddess]

Wow! I love that pencil casing! Its so simple and yet with the shadow it stands out. I definitely want that in my home lol! Thank you for sharing this!

[@genemiller9612]

I thought it was brilliant on the cope, but I would never have believed it would work with a hand held forstner bit. pretty slick.

[@Greg_Gatsby]

Yeah, I was expecting to see a hole saw bit in a drill press.

[@DGoat88]

@Robert Swaine whodathunkit? Is that English?

[@RomanArzumanyan]

@Robert Swaine Sharp 1" carving gauge shall also do it.

[@tonyrhodes484]

Goes beyond "liking that stuff". I love that stuff. Great video.

[@homesteadorbust]

Man I've loved this little series and geeking out over the trim and details. I think the contractor won the lotto picking yall to sub out for him absolutely top notch.

[@pitsnipe5559]

That is some really awesome trim details.

[@carpnotes4607]

Best finish carpentry channel bar none

[@felixb4787]

Love your passion...you really inspire me with the different projects I do at home. Keep us posted, love that house and all the details it has!! :)

[@jeremyrude6883]

As a 25 year carpenter your work is outstanding. Very time consuming.

[@petekendrick1598]

Hi Richard! I've been a finish carpenter and cabinet maker. I am very impressed with the talent, ingenuity, skill. I respect most of all your modesty and willingness to share with less experienced craftsmen. Keep up the great work and videos. I'm a long time subscriber and thoroughly enjoy your content!

[@moneymakingmikeg.9555]

Absolutely amazing Richard. Such an awesome detail. Hoping all is well Bud, Dirty Jersey out!!

[@markhamilton8765]

Congratulations…you really deserve this!!!

[@LTWCarpentry]

Great job, I love over coming problems like this, finding way to make stuff easier !

[@Tommmygunnnn]

Thank you Richard for sharing your skills and knowledge over the years. I've been watching you for a few years now and you've given me the confidence to trim our Victorian period house in the UK. Much love bro!

[@saulflores8050]

What an amazing home and original details that have allowed you and John to challenge your skill levels. Well done and can’t wait to see this home completed .👏

[@Niels_Dn]

Very nice! Love to see this craftsmanship and combined with the things Brent explains in his videos make it even more interesting 👌🏼 By the way, regarding the bent cap: here in the Netherlands you see a lot of these bent skirts next to stairs in old houses. There the caps are never separate, the skirt is made from one plank and then the cap is shaped (back in the day with curved planes).

[@nathancannon2235]

Cool trick ... As a finish Carpenter myself here in east Texas I have had to figure out cuts on the job site to I guess that's what sets us finish carpenters apart from the rest we all have to be taught or figure things out ourselves. In fact the last 2 new houses we have done I had to figure out a similar cut with shoe mold the cabinet shop started putting 1×1-4 flat stock on the edge of the cabinet where it meets the wall so the base buts into it on either side and leaves a space to fill with shoe mold so I figured out the way is to sqare butt one side of shoe and half cut the other at 30% inside corner and back cope it to half wrap the other piece. Y'all keep up the good work and thank you for your service to our country.

[@TransplantHelper]

Absolutely awesome, the only things I had guessed was pushing it up to a jig in a 1” drum sander. You are the best

[@imranh5395]

You are my favourite contractor because of your integrity. Thank you for sharing 👍🏼

[@joegutierrez4197]

I'll probably never do any major finished carpentry, but I just love watching your videos!! Keep up the great work!!! Blessings to you and yours!!!

[@cndream1]

How about a drill press, Yea, yea, I know, another tool to lug around. Also try putting the bottom nail of the vertical pencil below the top edge of the coped baseboard cap

[@larrybuckner8619]

Wow! Just wow! I love watching you make things happen! 15 year carpenter and still learning. Thank you.

[@dagwood1327]

If you have more of the pencil molding you might save some time and make a jig with something like a 2x4 drilled on a drill press to keep it straight. You could use cordless on the job and the 2x4 will keep you straight. Make a stop on the jig for repeat cuts and no cleanup. The board for the stairs is going to be easier to cut and router the edges. You do good work.

[@MarkZart]

Richard, above and beyond the mastery of your craft is the dedication and passion. This is the big lesson and the youngsters would do themselves a huge favor by taking note. Top notch work sir, in more ways than one. Thank you for sharing 👍

[@markharmon4963]

Richard, YOU CAN LAMINATE IT into a bend. Create a matching curve. Use 1/8" strips. Glue, bend and clamp over your curved cut of wood. Route the profile. CA glue it into a straight section. Bondo the joint. Sand, prime, and paint. I think that is how they did it over the doorway. (Probably no bondo.) Or they block extruded it from plaster in place.

[@KenMorgan1157]

You have heard this many times, I have no doubt. Congratulations to you and your success. I have been watching your videos for years and have learned many things. A backyard handyman, me, able to impress with excellent installations. Thank you, thank you for the time you invest to show and teach us all with your professional class. Be well.

[@Isaac306mx]

On the curved skirt, wet the wood and place infront of a heater for long enough to make it warm to touch, then clamp it before installing skirt and it will mold to it. I’ve had to do this before with Scotia molding ( inside corner molding ) not the best way but it will work on something that isn’t a huge curve. I love you videos, I want to start doing this as well. Your a true inspiration to watch! Keep up the amazing work. My brother has the best saying for his trim business. Watkins Brothers Carpentry (We cut corners) is his saying lol

[@JoshuaDStewart]

Your attention to detail on the pencil moulding and taking the time to show and explain it is really appreciated. I do millwork drafting/design shop drawings and this reminds me of some of the traditional-style new construction I've worked on in the past. While it's not my style, doing this kind of work has given me an appreciation for it. I've watched a handful of your videos in the past and this one got me to subscribe.

[@brianlochrie3958]

Great video. Seeing older styles being revamped. Instead of something plain to save time and money the way modern houses are made. Great job by you guys. 👍👍

[@johnlattanzio9859]

Also using that 1'in forstner to cope that pencil moulding was absolutely genius and will be adding that method to my bag of tricks💣💥🤯

[@Robertanimalis]

As I just subscribed to your channel I had no clue I had about 15 of your videos saved in my toolbox (my carpentry go to and learn videos) I gotta say thanks man you have truly helped me for many years, I’ve learned a ton and never thought say thank you or to hit thumbs up or subscribe. Well I’m subscribed and hittin the thumb button for sure. And again, Thank you.

[@devinteske]

No steam required. Lignin softens with heat alone. Use a heat wrap. Done right, no complicated steam box needed. Seen many videos of home builders in China using electric heat wraps to make stair rail bannisters flexible. It seems like magic.

[@NathanBake]

Cool finishes everywhere! Can't wait to see that fridge, too.

[@steveblakeman45]

The trim package is that house is breath taking. The dentil crown is very unique. I manufactured poplar moldings several years ago. We produced a similar applied dentil block made of poplar. I think we sold them wholesale for around 2.00 per block at the time. It was actually very profitable at the time. I think most of the blocs now are made of urethane or Fypon. This being the case, it’s great that you are making these videos for future generations because you never know what kind of advancements for architecture and installations will be made. Many products are now formed in a mold rather than being carved by true craftsman. The same may hold true for how these products become integrated into building panels.

[@cdixon2011ify]

I've been watching your videos for awhile and I love seeing how you are stepping up your game each time. Your work is absolutely beautiful. I would wish that maybe one day you could travel to Europe and study their craftsmanship. I know there is plenty here but it sure would be an experience.

[@kevinlucas8437]

This project is amazing !!! Love the level of architectural detail. Great to see you love of personal growth and excellence !!!

[@josiaa5570]

This job definitely has your name all over it !! Keep up your great quality work

[@Truenorthbuilding]

You are indeed a master carpenter. Love your videos and tricks. 25 year old remodel carpenter in Wa and hoping to move into finish carpentry soon

[@decuevas244]

You're building your knowledge one problem at a time. That's why it takes time to be excellent at carpentry or anything else. I've watched you throughout the years and you're surpassing many of your "brothers" in the field. Just as in martial arts, it's up to the practitioner as to how good one is. Bruce Lee was an above average practitioner. I believe you are as well as it pertains to your trade. I'm totally proud of you, all that you have learned in such a short amount of time. You have excellent "form" in using the tools of the trade. Your search for excellence in this trade is paying off well, and should be the hope of anyone starting out. Great job! 66carpenter

[@matthewfrey1948]

Nice work. I was a finished interior stair builder for 9 years. The fun of the job was figuring out the details. Early in my career I had to install level rails on a balcony that had tapered round columns. I had to mimic the radius at a taper on two vertical finish painted columns while maintaining level with no bow's on a 24 foot run. I made a jig on sight and used my skil saw blade to make the cuts in the oak railings by clamping the rail horizontal and plowing with the blade vertical at a taperl. The tolerances were near zero and I pulled it off. Theses were high end condos and perfection was demanded.

[@docbrown9664]

I started watching these videos because I was remodelling our living room and these videos saved me. I finished that...and I still keep watching these for some reason. Lol I think I just like seeing someone take so much pride in their work and doing things right. It's surprisingly rare these days. Keep it up man! Incredible work.

[@ozarksethic]

Thank you for the video. I really appreciate your integrity and desire to teach others. I am by no means a finish carpenter (or any kind of carpenter) but am in the process of building a house so I have been looking at many of your videos. Thanks for the help!

[@elonmusk8667]

16:21 In 1928 they probably used a file or had a Beaver chew on the wood.

[@kevkeelan5106]

That house is awesome, and your work is doing it justice 👍

[@veloistist]

Slightly mad but our Victorian terrace in London has the pencil moulding where the ceiling meets the board that edges the staircase as it goes from ground to first floor.

[@58Tailfin]

Amazing! I did finish work in east coast victorians back in the 80's that had a lot of wild and very ornate casing and molding. I've never seen the particular pencil molding though, and like you, I would have assumed it was round stock. I'd be really interested to learn how it was milled. Your forstner bit technique is genius! I probably would have tried coping either of the two pieces, and burned a lot of time and stock getting it right. I am curious why you miter instead of coping the two top corners? I am also curious what city this house is in. Bravo on your excellent workmanship and for sharing! Much appreciated!

[@andrewc6385]

I love that trick to get the round cope!!

[@jpreston9212]

Excellent work as always Richard! You are doing the work required to help future generations keep these gifts of the trade alive. May your videos be the educational gems for the kids (or long in the teeth) a hundred years from now as you said, and for today!

[@loserplanet]

Really looking forward to the finished walk through!

[@gregorymorris8343]

Glad to see you enjoying the expertise that involves finish carpentry- been watching you for years 🎉🎉🎉

[@echoewest2685]

Been watching you for a while and love your stuff, but this house is another level. This stuff is great, lots of good tips and info. Nice work, thanks for sharing. Brent Hull is a good follow too, he’s got lots of good content. You’re the go to source for lots of good practical examples. Between the two of you, there’s so much good finish carpentry content, thanks.

[@vrgcustomcarpentry]

That looked like a great fun cope.... sometimes the easy ones are the best and they seem the most challenging until you realize holy crap a drill will fix this issue

[@anthonysmith9410]

What you are talking about is pride….craftsmanship……this is what the customer is paying for . And you have this feeling inside of leaving your talent for others to enjoy .

[@KRColson]

Nerding Out! LOL. You gotta love it when shit comes together, right? Beauty!

[@chriswitz3949]

Such a cool project to be apart of...would be cool to find some crazy historical trim and re-create it for videos. Could combine it with a tour and a demonstration

[@devinteske]

I noticed something that maybe perhaps has gone overlooked. The specific way the crosseted corner butts-out, it creates an illusory beam which is a very Etruscan inspired detail (adopted by the Greeks in Doric structure). Look at the green granite over the fireplace. It extends into the crosseted corners giving the appearance that it is a solid beam extending past solid columns of the same material. We know the granite is likely a thin layer, but the crosseted corners help reinforce the illusion they are solid beams/columns. It is quite beautiful and all that is needed to make this illusion is to align the crosset with the void (in the case of the fireplace, where the pit is).

[@electricianron_New_Jersey]

I've never seen pencil moldings until now. I'lll see this profile tomorrow now - watch! Oh yeah.. definitely enjoyed how you created the profile with the forster bit. Nice work.

[@shawnosaurus1]

Awesome work and thank you for teaching us how to do carpentry. I'm currently working on renovating my house and my trim looks amazing because of your videos.

[@joewilliams9230]

Wonderful work as always. Thanks for taking the time to share.

[@steveblakeman45]

I’m a big fan of the pencil molding for a jamb detail. I think this is the first time I’ve noticed this profile used for this purpose. Very nice!

[@lindakincaid4530]

Love the french molding. I think it is really timeless. I see it in a lot of old homes.

[@AnointedHomeWoodworking]

God Bless you brother. Keep fighting the good fight. I truly appreciate your content and skills but even more so, I appreciate your humbleness.

[@lyndanorton6705]

What a beautiful home and your molding fix was brilliant.

[@sazinmi]

I have pencil moldings in my 1950 bungalow that is actually metal. It was covered by 1980's trim. But, when I uncovered it, I was excited to bring it back.

[@lavidanormalderay3296]

I know it’s a great feeling when new things come up to challenge. And you find a way to do it. Nice job.

[@tbw21007]

15:50 I am totally nerding out man!

[@Justforfun-ek7et]

I love your work and your enthusiasm for your craft. Thanks for sharing everything.

[@johnsaxontube]

This is awesome! I love that pencil casing. I really admire your dedication and fine carpentry skills.

[@ziggiesaquaticexotics8270]

Cool lil project brother haven’t seen your content in some months but looks like everyhings going good for y’all I’m glad! Have a great one brother.

[@jeffkerr7038]

Cool stuff Richard. Had a 1990s Amish built in the past that really cool casework. Didn’t know that was what it was called. Even had to replicate some myself when some of the trim rotted on the porch from too much weather exposure. I ended up starting with square stock and running it thru a router table to replicate the dowel side. Gives me even more appreciation for the details in that house.

[@tommynguyen35t609]

you da man , love you , you have a wonderful day and god bless

[@jpvill4th]

Back in the day carpenters used a drill too. The other way to do it is with multiple cuts and then a 1 inch curved face chisel. Cannot attach a picture. The curved face chisel is also called a gouge.