Indoor Golf Simulator Build with Carl's Enclosure, Mevo+/GC2 and Optoma GT1090HDR!

[@sealedog1]

In my research, I talked to both Carl's Place and Par2Pro for my own enclosure. Long story short, in my personal experience, the advisor staff (phone) at P2P started strong but finished poorly. The advisor staff (phone or chat) at Carl's Place started strong and finished strong. Their patience and follow-up was top-notch. Having never tackled such a project, and admittedly, not being very handy, I did a ton of planning and prep work in my efforts not to screw it up. Everyone I worked with at Carl's was patient and walked me through many of the details. I bought my DIY enclosure and screen from CP and set it all up this past weekend. Still need to get the tech up and running but Carl's Place was outstanding to work with.

[@JG10319]

Really great video. My build is similar, but I had to build it with the capability of folding up into the ceiling of the garage. I easily spent 100 hours working on it and perfecting little tiny things and I can tell that you definitely did the same here. No one except you will notice the last 20% of fine tuning you did, but in the end it makes for a very clean and professional experience. Your video is one of the best breakdowns I've seen, awesome job!

[@PixelGolf]

Thank you Jason, that means a lot!

[@timterlaje9888]

Jason, do you have any videos or pics of your build? I’m looking for ideas for a garage simulator that can be stowed when not in use.

[@JG10319]

@@timterlaje9888 Replied to you on facebook.

[@runpuddrun]

@jason do you have details on your garage build? I'm looking to do something exactly like that, as i'll need to move the car in and out. Thanks!

[@Chapoglios]

@jason, I am also looking at garage storable config if you wouldn’t mind sharing.

[@Macheako]

I gotta watch the whole thing later but off a first look, this setup looks *Gorgeous* bud (I work in simulation as a programmer)

[@PixelGolf]

Thank you!

[@MStar10]

Amazing setup - wow! Really wanted you to hit some balls!!! Was waiting for it!

[@BlackjackCZ]

Just stumbled across your build....really nice. I am planning on building a golf simulator in my RV garage. This helps out a lot. My ceiling is too high for a ceiling mount projector so will need a floor mount option. Cheers!

[@alcc4964]

How did the floor mount work out? What projector? Thanks

[@jergernice1]

@@alcc4964 use a side throw. keeps it out of the simulator area....buddy had his right under is computer.

[@carloangelo323]

Looking good! You might hear from me soon for some questions😆

[@PixelGolf]

No problem at all!

[@r.l.c.d881]

Really impressed with your setup mate! So envious that I don’t have the space or the knowledge about how to build a sweet set up like yours! Enjoy your time using it. 👌🏽

[@leomode2]

Great video, I also have a radar (although TrackMan 4) and I like to hit at least 12' to screen. Have you noticed any difference from 9' from ball to screen to 12' from ball to screen? I'm trying to get a new enclosure and I was wondering if I can at least just go with 8'~9' to screen. Thanks in advance!

[@PixelGolf]

Hello, I hit 9’ from my screen with my current setup, but I am running a GC3 which is camera based so it doesn’t require a minimum distance away. I believe the trackman 4 needs at least 8’ from screen. I like hitting from 9’ away, but keep in mind I have a 100”h x125”w enclosure that is only 33” deep. I would say depending on your screen size you may find 9’ too close if yours is a lot larger. If you can hit from 12’ I would if you’re sticking with the radar unit as their accuracy is better the more flight time, but again based on your setup 12’ may put you back too far for wedges to stay on the enclosure.

[@leomode2]

@@PixelGolf Thanks for the quick response. Hitting shorter than 12' definitely doesn't give a lot of data so I wanted to be in that 12'~13' sweet spot distance to the screen. I have a width of 14' so slightly more space than you in terms of the width and I am worried about my side shanks as I'll have some novices hitting as well. So with yours being only 33" deep, have you not encountered hitting the side wall for your mishits (unless you're not a novice)? Thanks!

[@ArizonaInsider]

I’m local to AZ too. Love this setup.

[@PixelGolf]

Thanks! Perfect golf weather here currently so lots of real life practice.

[@jy6221]

Nice job and video. I also have a Carl’s enclosure and premium impact screen. They’re amazing! I just bought the form inserts as I had a few bad kick backs.

[@PixelGolf]

Definitely the best enclosure I’ve used! The foam is necessary for errant shots!

[@jy6221]

@@PixelGolf 100% agree, bought and installed the foam inserts. Fixed my indoor swing issue as I was holding back out of fear of errand bounce back shots. Really impressed at the difference compared with pool noddles

[@PanthersT0021]

Great video. Lots of detail💪🏼

[@PixelGolf]

Appreciate it!

[@skim7221]

Please keep the videos coming! Can learn a lot from your videos!

[@dm-ohio]

That is freaking awesome! I am just getting started to build my own and definately going follow you for the great tips!

[@jefflyle5860]

This was a great video. Love Carls! Love the idea with the lighting behind the enclosure, that adds a great touch!

[@dwreck5578]

Great vlog great detail. Fantastic setup that shows what can be done within what many of us have with normal house constraints. Well done,Cheers^!

[@Jack-xy4fy]

Nice setup!

[@PixelGolf]

Thank you!

[@dw8216]

Sweet build.

[@Botpoint21]

hell yeah really like the flooring you have going. that was a steal for that I went cheaper and wish i didn't. really dig the setup. I like that insert a lot. Another way I would have went if I did it again.

[@PixelGolf]

Thank you, pretty happy with how it turned out! I have a few other inserts I will be trying out in the coming weeks.

[@MikeSoutham]

That looks so sweet and clean. Well done mate!

[@PixelGolf]

Thank you!

[@zombiehunter1152]

Very awesome set up you have there.

[@PixelGolf]

Thanks!

[@williamclayton7620]

Looks great🎉🎉🎉

[@jakesells2379]

Great setup, thanks for sharing it!

[@BrianSuttererMD]

Are you able to hit wedge shots from that far with only 3 feet of overhead cage projection? Building my setup now and I'm worried about wedge shots hitting the ceiling when I'm hitting 8-10 ft from the screen

[@PixelGolf]

I only hit a 56* full swing and it catches the top of the screen. I’ve scooped a couple and the hit the top of the canopy, but nothing on the ceiling.

[@PixelGolf]

Just hit a 60* that catches the top, just above the screen, but I have a thin piece of memory foam up there.

[@chrisbassett8277]

I have the same issues with the short wedges. What i've learned is that wedges shouldn't be hit with full swings anyway. Mostly something less for more control.

[@wefwefewfwefwef5645]

This was my first thought. Not only can you not do flop shots, but you can't invite novices to play on this setup unless you are cool with holes in the wall

[@benjamincrawford2979]

Great video...i'm gonna use your ideas on my own build!

[@PixelGolf]

Glad to hear - let me know if you have any questions along the way!

[@CarlsPlace]

It looks great!

[@PixelGolf]

Thank you! Great product!

[@alcc4964]

Bought one about 10 months ago based on your great videos. Question. My screen feels a little too loose at the ball impact area.(wrinkles) I do have the same foam pad behind the screen. Should I buy tighter bungees? Other recommendations? Thanks

[@PixelGolf]

I use all bungees around the perimeter and mine is still nice and flat. You can try tightening the bungees a little more if bounce back isn’t an issue. Are you using the premium screen?

[@kennethbensen4868]

Nicely done. Great setup, helped me a lot on decision making for my build..

[@PixelGolf]

So glad to hear that! It’s quite the process…

[@ArendBuren]

I like the way you can tee-up

[@ShahidKhan-pq4cr]

Thank you so much for this great video. I am going to build at my home with this help

[@PixelGolf]

That great to hear! Let me know if you have any questions at all!

[@ArendBuren]

Cool, very nice 👍🏻

[@jtb9991]

Great video, will be a tremendous help for me. Quick question, I was told that a PC version of the Mevo plus software does not exist yet only iphone or ipad, how did you set yours up of a PC? Thanks!

[@PixelGolf]

I used 3rd party software on there’s, GSPro is amazing! Take a look at it.

[@eb1250]

Really nice video. Thanks.

[@golfsr1879]

Wow Very impressive Super professionnel setup Good job.

[@PixelGolf]

Thank you!

[@realJohnWare]

Nicely done.

[@PixelGolf]

Thanks!

[@danielhernancristobal4965]

Hi from Spain. What happen when KZbin hit a full 60 degrees wedge? You hit The ceiling?

[@PixelGolf]

All I have is a 56* and it hits about 1 foot from the top of the screen. I’ll do a video hitting a 60/56 etc. soon.

[@danielhernancristobal4965]

@@PixelGolf thank you so much.

[@matthewteribery1150]

Looking at building a set up right now. I'm debating about getting the TrueStrike matting. Do you like the insert, and have you thought about changing it at all? I'd like to do something similar with the matting and carpet, but use a TrueStrike insert.

[@PixelGolf]

I’ve actually since switched to a homemade divot action, cost about $40. Definitely more forgiving on the wrists… Can’t take a real tee though which isn’t as fun. Looking into others right now. I also have Quattro mat to try.

[@gregmaas7930]

@@PixelGolf 9

[@kbbvwelsh9334]

What courses and how many different ones are included? Great set up and video.

[@GolfQuestChannel]

With E6 basic subscription you get 27 standard courses along with a couple rotating courses. More than enough to keep you engaged.

[@m3toz4]

hi , could you please tell me that you use the PLASTIC or METAL cutting tool? Thank you!

[@PixelGolf]

For which part?

[@MrShank12u]

Do you have any safety netting or other style backing immediately behind the polyester screen?? Or is it enough by itself with it's 250 mph rating ??

[@PixelGolf]

I can’t get those speeds, but I would do the mattress pad mod.

[@billyvancise8141]

how has the putting turf held up where your feet are? have you worn through it? do you wear spikes or just running shoes on it? thanks! awesome set up!

[@PixelGolf]

It’s still going strong after 1 year, check my update video.

[@Porterplex]

With the memory foam pad behind the screen are you able to move the enclosure closer to a wall? I would really like to get close as possible for my plans.

[@PixelGolf]

Check the 1 year update video for that info and links in description

[@Wesly_Snipes]

is the hitting pad in this video the Bltend Golf Mat from amazon

[@troystein2675]

The short throw is ordered. TY. Another question is I will be able to run the mevo through my mac to the projector through the usb? Thank you for always taking the time to answer my questions.

[@PixelGolf]

I don’t know Mac well, but you should have a video output port of some sort that can be connected to the projectors hdmi with the appropriate cable.

[@-JUSTICIAR-]

Looks amazing!!!! Im building one at the moment do you have a link for the green mat?

[@carikazik7118]

We’re did you get the off brand hitting insert

[@PixelGolf]

Check my channel, I teach you how to make one. Also, please subscribe!

[@TheGoshood]

good work

[@troystein2675]

Do you have a less pricey gaming laptop or pc that you could recommend? I recently found out that the mevo plus e6 complimentary courses are not compatible with my MacBook. Any suggestions would be greatly appreciated.

[@PixelGolf]

Check Best Buy open box deals. Anything with 16gb ram, i7 and Nvidia card in the last few years should work!

[@bx2countrygolf]

When ordering the putting mat what particular mat did you choose so I can order the same thing? Thanks and wonderful video motivational for sure to start my simulator in my garage since I can only swing 7iron and below good enough for the winter to swing and now lose my feel. I swing outdoors during the spring summer and early fall months

[@chrisbassett8277]

I have a set up very similar to yours with the puzzle gym Matt etc. I have loosened (2) bungees per side and the ball still seems to come back too quick. By that I mean that the ball will bounce and then roll back to my feet quickly when I’m hitting from 9.5 feet from screen. That’s with a 9 iron. I’m 69 and hit a 9 about 120 yds. Your thoughts?

[@PixelGolf]

Sorry I missed this I one! Try removing a few from the bottom as the sand bar should keep tension regardless and limit kick back.

[@andrewferiozzi945]

Great video and good looking set up, how high are you ceilings they look like 8’-6”? If so do you have issues swing driver? Also how far away from the screen is the projector and in relation to the golfer is it directly over you while your hitting? Thanks for your insights.

[@PixelGolf]

Video uploading for all those details!

[@andrewferiozzi945]

Hey did you ever get a chance to look into my questions? Thanks again

[@PixelGolf]

@@andrewferiozzi945 Hello Andrew above the hitting area is about 9.5’, no issues hitting driver.

[@codyrsexton]

Great video. I noticed you have your projector connected to Sonos. I just purchased the same one and was wondering what connection you are using for the Sonos since it doesn’t support HDMI arc?

[@drepari]

Great Set-up, also like your video on controlling bounce back. Curious about the turf you used, it says it requires an infill. Did you apply an in-fill to your turf and if not have you noticed any issues, does the turf remain in place under its own weight or is it affixed in some way?

[@timothyalexander5483]

As you golf more with your mevo+ What is your recommendation for distances for ball to screen , mevo to ball.

[@PixelGolf]

9.5’ ball to screen and 8’ ball to Mevo+. Sorry for the delay!

[@coforme]

How does the impact feel with that mat /turf combo. Curious about wrist pain off that mat

[@PixelGolf]

I am currently running a DIY divot action that has a lot of give to it on the downswing. No wrist pain here.

[@harmon411]

@@PixelGolf is the DIY divot setup the one you show in this video? If not, do you have a video of the DIY?

[@PixelGolf]

@@harmon411 it is not. I’ll get an update video up!

[@scottpreston3016]

Can you explain why you had to get the 1" EMT piping, where is that installed? Didn't Carl build-out the SIm frame for you?

[@PixelGolf]

Carls provides all the connectors, elbows, instructions and everything you need to build through them. They have an option of supplying the emt as well, but it was more cost effective factoring in shipping to get them locally. It’s really simple. They send you a breakdown of your build with all of the pipe lengths before you get the kit so you can grab the emt while the kit is shipping and get it all put up in an hour.

[@FrancesStevens-r9p]

Great video, I've watched it a couple of times now. I do have one question not related to the setup but a message I saw on the screen while you were going over Carl's enclosure and screen. The message was "Flight Scope Device not Found", it was blinking on and off. I just purchased and started using a mevo+ and I am getting the same message when connected to the E6 app. It looks like the connection from the the mevo FS 2.0 PC software to the E6 package keeps dropping and reconnecting. Do you still get this message or were you able to find out what the cause and solution to fix this message was?

[@jimmynutz6497]

Starting my build now.. wondering how far back your projector is mounted? Want to make sure I have and outlet installed up there and run HDMI cable there as well. Thanks

[@rough_hand]

Not worried about shanks? Must be nice lol dope set up!

[@PixelGolf]

Oh, they happen😂

[@DylanInAlbuquerque]

Are you completely happy with the gym tiles you linked? I just noticed some reviews on amazon say they slip easy, so just wanted to see your experience. I currently have 3/4 inch tiles but i bought the holy grail strip which says youll need 1 inch tiles under your turf so it matches up. think the height difference is enough to get all new tiles that are 1 inch instead of 3/4?

[@PixelGolf]

Yes, I’m completely happy. Due to the size of my turf it doesn’t really move. If it’s in the budget, go for 1”. 3/4” isn’t thick enough for most inserts and the reason no one makes inserts that thin is due to the amount of downward travel from the swing arc.

[@DRancid]

Great setup! Just curious how loud that impact screen is when you actually hit a ball to it.

[@PixelGolf]

Will do a video using it soon! Not loud at all!

[@giovanniodaglia4024]

Amazing video and set-up. Can you please share how much did it cost in total to make it so perfect?

[@PixelGolf]

I paid around 5500 usd with everything pictured using Mevo+

[@JohnBinns-t7i]

Is the ratio on the screen 1:1? Did you create a video on how you changed the settings? the 1090 doesn't have 1:1 as a resolution.

[@PixelGolf]

This is 4:3 aspect.

[@zacharymilos392]

I know you made a follow up video so maybe you answered this there - I noticed the hitting strip is listed as 1.75" thick online, and the foam you used is 1" thick. The putting mat you linked says the pile is 5/8" thick, so do you feel like the strip sits 1/8" low or do you not notice?

[@PixelGolf]

It’s level so to the Lexan being about 1/8” thick.

[@ainaraijala862]

Great and helpful video as I build my SIM. Would you be able to put the Pipe insulation on the front of the frame inside the black material that the pipes are in? I think it might look better in the room I am building but couldn’t tell if it would fit inside.

[@PixelGolf]

No I tried that and there wasn’t enough material.

[@thomasmteal4877]

Hey I really like the set up you have... I have a questions about the Carls Place set up part. I am looking to order one but I am curious if you have to put padding behind where the ball will impact or if you can just have it pushed right up to the wall and the projection screen just takes all the impact and you dont have to worry about ball marks on the wall? Can you help out or elaborate if you have to put anything behind the screen and against the wall. Thank you!

[@josephruopoli245]

Would i be able to do a simulator with 7'8 ceilings ?

[@PixelGolf]

I believe so. Check my video for the carls diy tool and click on the link in the description. There you can enter your ceiling height and see what options you have.

[@tienne9]

I did one in my basement with pretty much the same ceiling height. Unfortunately it was not high enough even with wedges. You need at least 9ft to be comfortable in my opinion.

[@zanevillaincru]

Good stuff. Thanks. I’m gonna use Carls. How high is your ceiling?

[@PixelGolf]

Glad to hear! My ceiling slopes but it's about 9 feet over my hitting area.

[@anthonyalexander5607]

triple check your HDMI adapter. A lot of them don't support HDMI 2.0. You might be hamstringing yourself. Awesome setup btw.

[@drabhishekaggarwal]

Awesome setup! Is there a way to make sure the putting surface is completely flat with no curve/slope? What to do if there is a slight slope in the floor?? Thanks

[@PixelGolf]

Our flooring is pretty level, so that is not something I’ve personally had to address.

[@Ryan-rx8ie]

So obviously you are projecting in 4:3… how are you filling the screen full? Thank you 🙏🏼

[@mikefatzinger1609]

How far from your screen is your projector? And how far in front of the hitting area is the projector? I have a short throw and I'm thinking about 10 feet from screen to hitting area and 8 feet from screen to projector.

[@jackkavanagh4705]

what is the actaul screen size.and are you happy with it. thanks jack

[@PixelGolf]

Hey Jack, actual screen size the image projects on is 89x117” I’m more than happy with it, especially the durability and quality of the screen. I can’t believe how well it’s aging! However, if I had the space for it I would love to go with a wide screen.

[@brandon18965]

For your putting turf, did you put infill? If not, how does it roll when putting? Setup looks awesome!

[@PixelGolf]

No infill and it rolls nicely!

[@unnikrr]

Hi, great video! super helpful with my own planned sim set up. perhaps I missed it, but do you have a link for your hardcase for your memo plus?

[@PixelGolf]

It comes with the Mevo+

[@bruceweiner629]

I just purchased the same screen from Carls. Do you think using the 1 inch pipe insulation would work on all the pipes, instead of the other stuff from Carls? Also, the screen just mirroring your PC. Not setup as a second screen?

[@tomvega1666]

Hi great video, on explaining your set up and process , you Fido mention your total cost , or maybe I missed you saying it . Thanks for the videos and tips

[@PixelGolf]

$5800 with Mevo+

[@Fat_Panda83]

Where is the Mevo+ leveling and alignment stand from? I didn't see a link above. Trying to find a good quality one. Thanks!

[@PixelGolf]

Check Carls Place, they have one that is $50 and looks really solid!

[@troystein2675]

Good morning, are you satisfied with the Optoma GT1080 projector that you referenced in this video? Do you have the short throw or the regular one?

[@PixelGolf]

Yes, the GT1080HDR is good as well, short throw for sure! The 1090 offers some cool features and no bulb replacement, but I’d save your money and get the more than capable 1080 and wait for 4k short throws to hopefully be affordable in the coming years.

[@troystein2675]

@@PixelGolf Thank you. When I order it is it actually called the GT1080HDR Short Throw? Or is it automatically a short throw?

[@PixelGolf]

@@troystein2675 I believe it is a short throw, could be wrong though… make sure it is the GT1080HDR you get, there has been a lot of other PNs claiming they are the GT1080HDR, but they’re a different model.

[@troystein2675]

@@PixelGolf PN?

[@PixelGolf]

@@troystein2675 part number

[@DavidHung-st7fg]

Did you need to add sand to the putting turf?

[@PixelGolf]

Nope, no sand. While sand would speed up the stimp, I find it to roll at a good speed and true.

[@martybauer31]

Great video, thanks man! Just got my Mevo+ and looking at the Carl's stuff myself. Curious as to what your distance is with the Mevo, both Mevo to ball and ball to screen? Apologies if you mentioned it... which screen did you get, the premium?

[@PixelGolf]

8’ Mevo to ball, 9.5’ ball to screen. Premium screen.

[@dustindavidson849]

Marty: Did the Mevo+ ship right away or was there any wait time? Thanks.

[@martybauer31]

@@dustindavidson849, shipped within just a couple of days, I had it in about a week.

[@DylanInAlbuquerque]

did you by the plastic or metal cutting tool from birdieball? If plastic worked for you Id like to save the extra $25 because I will have the same mats and turf.

[@PixelGolf]

The plastic didn't work well at all... I'd go with the metal one. Or you could use the plastic to score it and finish with an exacto knife.

[@chasehouston22]

Did you add anything behind the carls screen for added safety? I have windows behind my screen and fighting daylight and thoughts of breaking windows! Thanks!

[@PixelGolf]

I have a window behind my screen as well, but have a 12” buffer zone and it doesn’t hit.

[@chasehouston22]

@@PixelGolf thank you! Appreciate it!

[@alexabird2485]

I appreciate your review. I made a purchase for a setup from Carls and am waiting to receive it. My question is how do I set up the Mevo+ with the computer? Does the Mevo+ come with software to install?

[@PixelGolf]

The Mevo+ is really just iPhone only apps free with the Mevo purchase. If you want PC I would suggest, E6 connect, TGC2019 or wait for GS Pro to come to Mevo, which is soon I here. You can request a free Demo if E6 connect for your Mevo+ to demo E6. It has 1 course, a range and a few practice areas that will keep you entertained while you decide!

[@matthewskas2836]

Love your simulator. I was trying to find video of moving the flight scope up to 7 ft from 8ft. Did you have any issues with this?

[@PixelGolf]

Flightscope recommends 8’ from ball, I have run mine 7’ from ball and didn’t notice much of a difference. I believe a lot of people run it from 7 back.

[@davidvaninwegen1015]

Great video! I love the set up and all of the great information! How did you cut the putting turf for the mat insert?

[@PixelGolf]

Adjustable box cutter. The kind with the king blade that snaps off sections.

[@davidvaninwegen1015]

@@PixelGolf Thanks! Did you have to cut the gym tiles as well for the insert?

[@martincope6469]

How high is your ceiling above the tee area?

[@PixelGolf]

About 10’. Full dimensions in breakdown video.

[@johnlopez8175]

your hitting Mat doesn't match the one in your link. what is the hitting mat in the video?

[@ZacharyPalmerCharles]

Would love to see how you do the putting with Mevo+

[@troystein2675]

Does the hitting mat insert need to be small to keep it from moving?

[@PixelGolf]

No, just make a snug fit or use 3M tape

[@troystein2675]

@@PixelGolf Do you have a size you would recommend if I am going to have both right and left handed golfers?

[@PixelGolf]

@@troystein2675 12x30 should be fine

[@themarka]

Hey, great great rundown! Can I ask a couple of things about the room size, please? How high is the ceiling at the location you swing from, please? Also, with your turf, does your swing arc behind and around you swing our beyond the boundaries of the turf? In other words, if the *room* was as wide as the mat, would you have plenty of room? Thanks so much, dropped you a sub, too!

[@ronzimmer1]

How did you measure and cut out the mat for the insert? Thanks

[@PixelGolf]

Trace the insert on to the turf and cut out the shape. The trace to new cutout onto the mat and cut that as straight as possible. You can take out the puzzle mat and cut on a bench top since it’s removable and marked. Tip: have a tight fit from the back and a little room on the sides so it doesn’t affect the insert returning back to normal.

[@jackkavanagh4705]

how did your 24/7 screen workout.thanks

[@PixelGolf]

It wasn’t for me.

[@BigShay1977]

Hey...can I ask you a question about the foam triangle inserts? I ordered a DIY kit from Carl's Place and opted to skip the inserts, thinking I could try my own mattress topper foam for a lot cheaper. Anyhow, I learned that there's definitely different spring rates of those foams, as you illustrated in your bounce back video. I tried to call Carl's Place and ask how springy the foam triangle inserts were and I only got a sales-y answer that wasn't very convincing that I should spend $200+ on foam. Can you tell me if their foam triangles spring back into shape immediately or do they spring back slowly, like within one second?

[@PixelGolf]

There’s spring back very slowly, best foam I’ve seen.

[@BigShay1977]

@@PixelGolf Awesome, thank you!

[@scottperry6320]

Did you happen to try the mevo 7 foot behind the ball? I’ve got a room that checks all the boxes Except it’s only 15.8ft long wall to wall.I could probably put a pocket in the wall to get it to 16ft total. I’m going to get the same screen set up hoping to get it as flat to the wall as possible to maximize my distance to screen. Do you think it’s doable from those dimensions? Probably 7 foot from mevo to ball and hopefully 8 foot from ball to screen?

[@scottperry6320]

Also thanks for the great video👍

[@PixelGolf]

Sorry for the delay. Yes, 7’ back seems acceptable and many run it like this.

[@justinhopper410]

I have the almost exact setup with the same projector. I need some tips on how to get the image to fit my screen like yours. Any help would be great! Keep up the great videos!

[@wozzauk13]

It seems that all of the Carl’s enclosures online are 5 ft deep, but yours looks maybe 3ft? Do you know if they changed the depths or is your less depth an option? Thanks!

[@DMastaOfDisasta]

I am looking at building a sim. The optima displays a 16:9 ratio. How are displaying without any spill over on 4:3 screen?

[@PixelGolf]

It has the ability to run 4:3 as well. I fit the height and adjust the with in the graphics card.

[@sealedog1]

Having trouble finding outdoor putting turf that lays naturally flat as yours does. Can you tell if yours has a specific manufacturer? Others I am seeing are rolled up and will require being glued or nailed down. Nice video.

[@PixelGolf]

Link in the description

[@sealedog1]

@@PixelGolf Found it......thx. Sorry I missed it in my initial review.

[@Fat_Panda83]

What was your method and tools to get a straight cut when trimming the putting turf?

[@PixelGolf]

I used a heavy duty retractable utility knife, the one with the blades that snap off to reveal a fresh blade. I used a large piece of wood underneath and a 4’ level on my line I drew out and follow the edge with the blade to cut. You can see me use that blade to cut the same turf in my hitting insert video on the channel.

[@Fat_Panda83]

@@PixelGolf thanks for the quick reply!

[@troystein2675]

Also, if my ceiling is 11 foot high and my screen is 9 foot high, do I need a 2 foot extension for the projector mount?