INFINITI G35 / NISSAN 350z - Oil Consumption Fix

The proper explanation and fix to oil consumption in this video, unlike other KZbin videos. Vented Oil Catch Can.
Dyno tuned 2005 Rev-up G35
Performance Mods:
- KW v3 Coilovers
- Injen CAI
- NWP 75mm throttle body
- Motordyne MREV2
- Motordyne 5/16th spacer
- Motordyne v3 ART pipes
- Motordyne Shockwave TDX2 exhaust.
✘TroyBoi - O.G [Bass Boosted]
♫ Download This Track Here ♫
➥ / troybo. .
♫ Support The Producer ♫
● / troyboi
● / troyboimusic
● / troyboimusic
♫ Support The Managers ♫
Owner - / justmusi. .
Manager - / thetrapw. .
➥ Follow TroyBoi:
/ troyboi
/ troyboimusic
/ troyboimusic
♫ Download TroyBoi - O.G ♫
➥goo.gl/xkvISJ
Click "Show more" to see important details!
♫ Support Bass Nation ♫
♦alltrapnation.com/
♦ / all808nation
♦ / allbassnation
♦ / allbassnation
♫ Support TroyBoi ♫
● / troyboi
● / troyboimusic
● / troyboimusic
● / troyboi_music
/ troyboi-og
/ troyboi
/ troyboi
/ troyboi
/ troyboi
/ troyboi-og
/ troyboi-og
/ troyboi-og
/ troyboi-og

[@Jaedavis12]

What's the correct link for the pcv valve delete I cannot find it please an thanks

[@MotordyneG35]

$20 at Project Import Tuning...............www.projectimport.com/store/vq35de-and-revup-nissan-infiniti-pcv-valve-port-to-8-an-fitting/ They go into more detail on the install, on their channel............kzbin.info/www/bejne/sHLTkomAo9Kclbc

[@Jaedavis12]

Motordyne G35 an I have a sedan looking to do some performance mod in the near future I bought an 04 an installed an 05 Motor what's the best way to start ?

[@MotordyneG35]

Check out my video on how to get 350HP....................kzbin.info/www/bejne/f4SpgH6fdrSHo9k

[@fleco9229]

@@MotordyneG35 did you installed the clear hose inside of the catch can that came with it or left out?

[@jonathancornejo1790]

@Motordyne G35 you said that you ran your second hose line behind your engine to the second valve stem where is that one? Somewhere behind your intake?

[@taelorwatson9822]

Mine consumes about 5 quarts every 4500 miles but only when the drain plug is removed and a new filter put on.

[@lukasethan6429]

Hey bro! Saw someone else on YT talking trash on this method. Well, I’ve used your method on 4 Gs, as I flip them almost exclusively. I’ve ported the intake and plenum, on all of those. Since I have used the method in this video, after 3 years I have see ZERO blow by or oil sludge in the upper plenum. Just wanted to shout out again. Have a good one.

[@MotordyneG35]

I saw you light up my Instagram, I barely check it. Thanks bro!

[@TheShizzle622]

Just got a G35 and I'm looking for ways to ensure I can have it for years to come. This is EXACTLY the type of thing I was hoping to find. Great reference points straight from Nissan itself so I can properly guage my cars health in terms of oil AND a detailed explanation on how to make the engine less prone to build up. Keeping the inside of the engine clean and cutting back on oil consumption sounds like it's gonna be my first mod now. I feel like I can't thank you enough for making this content, man. :)

[@slick88able]

Great job making this video. I’m new to the Z world & it was refreshing to find a video that was straight forward & stayed focused on educating serious viewers versus just another comedy routine. Hope to watch more of your videos- Thanks again!

[@oxillerate7992]

Your vids are way helpful! I've been looking for a legitimate explanation on this for ages and none come close to yours. You're literally saving engines one viewer at a time. Thank you!

[@brandonmarrow7783]

Love your channel man. I've recently been looking into getting a g35 and have watched tons of videos. There is alot more helpful information and support with these cars then i imagined. Your videos definitely show a more detailed and correct way of doing things although it is much more expensive the outcome is worth the extra money im sure.

[@speedracer2831]

Whenever I gotta issue to deal with, I know where to look for help! Just broke 50k on my 06' Coupe RAS. I need to replace that pcv, and add a catch can...so grateful for the time and effort you put into this channel. Years of valuable info at my fingertips!!!

[@Pethaho]

big thanks ! you’re the best owner i can think of that got a g35 😭

[@MrBrown-vp7ie]

Thank you so much for this piece of info concerning this oil issue. it's much needed for us VQ owners. Your car looks amazing and sounds just as good. I'm beginning my road to efficiency and power tomorrow. 05 G 5AT!

[@MotordyneG35]

Binyamin Breezy .....Thanks for watching. Stay tuned to my channel and hopefully I can help you with your G.

[@devinlaczo5125]

Been doing hondas for 5 years now just got a 03 g35 6mt. Looking to learn more about the platform. Great video gave me a lot of great info

[@emmanuellopera6250]

Youre videos are super informative and organized!!🙏

[@FuzerMiX]

Super informative thanks man! I was looking into catch can systems

[@mj350gt2]

Just installed dual oil catch cans on my Hr. Runs so much more efficiently! I fill more acceleration/pull response !

[@tombutler6687]

Very informative video! Love the G man, Keep up the good content!

[@MotordyneG35]

Thank you!

[@ElegalvicnLa]

Great very Detailed informative video for the G35. Thank you.

[@kenjenkillasounds]

I don’t even have this car but man the way you explain and give detail examples was interesting👍🏽👍🏽 maybe one day I will own one of these

[@MotordyneG35]

Thank you! At 190,000 miles and had the G 15 years.....this video will change your mind.....kzbin.info/www/bejne/bp7de2pqq6h5ac0

[@Sonic_the_hedgehog65]

That intro was hard 🔥🔥😎🔥🔥

[@nkastis8211]

just going off all the other guys videos on here with the non vented cans... thanks though I'm grateful you put up this video before I wasted good $ on those expensive mishimoto baffled catch can or an eBay non vented catch can! I'm deff going with a vented catch can when funds are in order! Thanks again!!!

[@jellofuel]

I was under the impression a revup would need a rebuilt short block to resolve the issue. I suppose there's an element of truth to that if the owner doesn't install a catch can though. Another excellent video though, I like the video demonstrations you've got in there.

[@omerkhan6806]

Very informative video, thanks for all the links and info. I want to install the same setup of PCV valve you have. I saw the youtube link for installing the catch can you posted on replies here. I just had some questions, do I need a tune after installing this type of PCV valve and catch can, will it mess my emissions test and idle or is it just install and everything will work as normal? Thanks again for all the videos!

[@coltonboyyy]

Very good video! My 05 g35x consumes like 2 or 3 qts per 1000 miles (2 weeks of daily commute) and I need to do this, hope it'll stop my inefficient "oil mileage"

[@roscoec.2575]

Excellent video and info thanks!

[@thatpoeticthug]

He just got a new subscribe because of this thanks man my 04 G35 likes to chug on oil

[@thainess57]

Just installed my catch can over the weekend based off of your recommendations. Super excited! One question, I also live in Phoenix, how often do you have to change the breather filter?

[@MotordyneG35]

Congrats on a vented catch can! Good question. I also have wanted to change the filter but they don't sell the filters separately from the can. It looks like reusable filter so when I empty out the oil blow by, I just rinse and clean the filter. If you need help with your G, message me since I am local and I can come to you, if needed, to help fix your G.

[@thainess57]

@@MotordyneG35 I would really appreciate it. I just did an engine swap and want to keep everything running as smoothly as possible but also want to start having some fun with this car :)

[@lizbethmoreno9063]

Motordyne G35 I’m in the process of getting an 06 g35 , how has this vented catch can been working ?how has just cleaning the breather filter been working?

[@thaihuynh6518]

@@lizbethmoreno9063 I can't speak for my boy motodyne but for me, it has been working really well. I probably burn about 1 qt of oil every 3000/4,000 miles. Before I was burning maybe 1qt every 1,500 to 2,000 miles. I did have to change the whole system once because I got lazy and let the catch can overfill. It messed up my filter and it was just easier to replace the whole thing. Generally I try to empty it out every month as well as clean the filter with a hose. I live in the Phoenix so it doesn't get very full in the summer but for some reason in the winter it gets full pretty quickly and you see a lot of "gunk" that would be in your engine. Hope that helps!

[@thecarloscastro]

Thank you Motordyne G35! This is a great video! Could you do a video on your intake?

[@MotordyneG35]

Thanks for watching.............yeah what would you like to see about it? Data logs and air intake temps?

[@justinbustin677]

The fwd vq35de the backside of the throttle body is where the gases re enter the intake side. From the pcv valve. That hose on the injen or factory intake pipe pulls air, on the altima vq35de.

[@OnellOfCYB]

Thank you so much for this video.

[@JC-mr4rz]

Very helpful. Appreciate the Vid 🙏

[@TheRealCoachRegg]

Hi sir thanks for the info. I just purchased a 2006 g35 6mt revup less than a week ago and been trying to figurenout what to do about the catch can. I have been wanting this car for years and watched several videos about the oil consumption before i even bought it. But anyways my question is i thought catch can setups generally work by utilizing vaccum to suck the blow by into the catch can filter it and send the cleaner air back into intake. Correct me if im wrong but this seems more like almost a pcv delete almost. Just from the crank case ventalation side as well. My question is do you still have yours set up like this and if you do how has it been working for you these past years. And finally do you see and blow by in the catch can ever and if so how much how often.

[@felixpereyda847]

Dude excellent video

[@bennyflores9134]

Nice video. Thanks for the info.

[@josevelarde4113]

Do you recommend doing a set up like you did for my G35x sedan 06 or the other way when they plug the pvc to the catch and back to the plenimum tube and they don’t even bother to touch around the air intake

[@johnd1680]

Thanks for the great videos, I watched them all before deciding to buy my 06 6mt coupe. Catch can is on the way.

[@SSANCHEZ1985]

Hi, could you please make a video for dummies such as myself (or point me in the right direction) on how to properly set mine up like this? Thanks 😅

[@MrMuffanga]

One thing that I didnt hear you mention. Is cheap oil and Full Synthetic vs Conventional/ synthetic blend. I have a Durango (2000) that was going through oil like crazy. Switched to a full synthetic and it doesnt burn any oil and I'm very harsh on it too

[@cashboyfiji7365]

All I’m missing now is the lower plenum & spacer :( installing the Art pipes this weekend though!!!!

[@NATE_DOGG_]

How much oil have you actually caught in the time being since you uploaded this video

[@neonskyofficla]

Thanks for this excellent video! Great explanation. I have a question. My G37 with about 105k miles is smoking from the tail pipe. Pcv valves were clogged and it caused some damage; had to replace both valve cover gaskets. Although that was fixed, it still smokes when I start the car. Could this be gunk residue? Will a catch can help this? If so... what setup do you recommend for the VQ37VHR? I’m so bummed. Started smoking the day after I bought the car. Didn’t smoke on the test drive. Thanks in advance! You g sounds sick btw!

[@janstess86]

Wow, great video. I am buying a G35 tomorrow. Gòd to know.

[@kika5403]

Motordyne G35 are you using the 3/8 or 1/2 barbs from the catch can? Also I want to get SS braided hoses instead of the ones that came with the kit do you know which sizes I need and adapters needed? Also what size vacuum caps did you use to plug the intake manifold port and the suction point on the intake?

[@billymcrae99]

so i have an aftermarket air intake but the vacuum hose keeps falling off. is that bad for the overall life of my engine if I end up driving without it for a days at a time?

[@efeege9525]

@Motordyne g35. I want to set up a system as you suggested. If the pcv valve remains original, will the oil catch can still work?

[@dennishayes1505]

ive got an 09 fx35, it's burning oil big tyme as the valve seats are shot. whats the best plan for that. whole new motor/rebuilt heads or find a head repair guy??

[@RellekZone64]

Motordyne G35, I'm thinking that since I am in California, I would have to undo this setup before I have to go get a smog check. Don't think it would pass the visual smog inspection with the vented catch can. I always wondered why they would set up an engine to suck oil vapors and blow by back in to the intake system in the first place, just seems stupid when they know in the end it can damage your engine due to the sludge build up over time. If they have a chart for it they knew it was an issue.... Anyways looks easy enough to do to my VQ's thanks for the info and clear explanation of the fix. I have a 03 G35 5AT a 05 G35 6MT REVUP and a 04 I35. Many thanks!! G's out!!

[@fl3cko91]

What type of hose did you used Motordyne G35? Where did you find the plugs to seal off the ports? After this install did you have to tune anything or relearn throttle body?

[@StrappingYoungComrad]

Have you gotten sludge buildup in your engine or inside of your oil cap from doing this? Im switching to this vented set up and have read a ton of pros and cons.

[@johnd1680]

Since your can isn't venting back into the motor did you run the clear tubes to the bottom of the can on both ports?

[@timtaylor9590]

how did you connect the port in the rear to your catch can, the hose that normally connects to the intake z-tube is much larger than the pvc valve connections.

[@generallinks8535]

Just a quick question I’ve looked at the line connected to the intake is that hose larger by any chance?

[@carlosdiaz1033]

Do you ever smell any fumes or oil in your cabin? I see that it's really far away from the firewall but just curious since its vented.

[@1slows5]

i have a g37 but those one have 2 pcv valve so i need 2 catch can like you have . thanks for your help

[@lemmy999]

Great video. Thanks! I understand how the PCV system works and I understand that it results in making your intake nasty/oily. But I don't understand how using a catch can reduces oil consumption. Would the oil that was being burned in the combustion chamber just be deposited in the catch can? It seems that if the oil dropped 10mm in 1,000 mi before the catch can install, it would still be dropping 10mm on the dipstick in 1,000 mi after the catch can. Am I missing something?

[@MotordyneG35]

lemmy999 ....no you got it. The problem isn't consumption, but the sludge left behind from the burning of oil. Stop the burning of oil or overtime the sludge left behind from burning so much oil eventually becomes a problem.

[@ajdoria7010]

Did this mod affect the idle speed and air fuel ratio,if it did would I need to do a ecu relearn..

[@gkukino13]

Have you had problems with oil pressure build up? I did the catch can set up just like you and I’ve been having leaking from the spark plug seals on the driver side (installed valve covers not too long ago) is it cause there’s no vacuum? Any help is much appreciated. Thanks

[@fleco9229]

Hey motordyne g35 just one question can I just disconnected the hose on the air intake port and add a hose mender and connect it straight to the catch can or does it need to be directly from the valve cover port?

[@romanyfagan7567]

I have a Nissan v35 can I take the same approach with respect to performance modifications like a G35?

[@chrisl7768]

What's the correct type of breather tank? Idk what's the difference between a lot of oil cc with the filter and can most oil cc can be both inlets only?????

[@fastcars.4093]

NOW I know what to do to fix my 04 coupe manual oil consumption. THANK you

[@AntoineJra]

Courtney R did this work ?

[@AM-le7eh]

Any update?

[@tabariousberry3753]

How is the car running since you added the catch can. I was looking at the add w1 catch can.

[@jeffcoats3519]

Do I pcv delete both sides or just the passenger side? ( the side you pointed out in the video)

[@hellaflush49]

Can you tell me the sizes of the hoses you used for the valve cover and pvc please?

[@jamesbono5744]

Have you done a install video on this catch can? It looks very confusing to install

[@seans158]

My 03 G sedan has coolant where the transmission and engine meet undercarriage. I very slowly lose coolant from the resevoir. Only thing I can think of is maybe a heater hose? But I cant pinpoint it. Any ideas?

[@joshurmetal420]

Where is the hose from the out side of the catch can go. Doing this on my hr, no good fourms out there. I want to run a vent to atmosphere.

[@AL_Veen]

are the hoses/lines different sizes from passenger/driverside? or are they both -8?

[@kinggwuapo]

Did you do anything with the valve cover PCV valve on the divers side ?

[@pieroruiz9154]

can you do a more in depth video about installing the catch can plzz

[@wreckemtech165]

So you is this just a "band aid" type of fix since you said the problem originates from the piston rings? Or more a permanent solution? My 04 350z burns lots of oil and it seems like it recently just started doing that

[@NK-yv5oi]

Great video & great information! Question: Potential G35 buyer of 06/07 G35 coupe /w ~100,000miles: 1) How does 1 check before buying G35 if the car has massive oil consumption issues? 2) Do you just go about installing the oil catch can + pcb pipe etc you mentioned at ~100,000 miles G35 or do I need to replace everything before doing all that to make sure the build up doesn't already exists? Thanks!

[@MotordyneG35]

You will be fine. No way to check unless they let you drive it for 1,000 miles and then check the dipstick according to the consumption chart in this video. The oil catch can will help you get to 300,000 miles. Here is a more detailed install from project import..............kzbin.info/www/bejne/sHLTkomAo9Kclbc

[@NK-yv5oi]

Just double checking that even if the previous owner is at ~100K miles I shouldn't need to replace everything followed by a oil catch can correct? 1)Reason it worries me is what if the build up has already started in the engine....? 2)What are some questions that are not directly "does your car have oil consumption issues?" I can ask to maybe get out the truth about that issue? Or a few things I can check that might hint towards that issue?

[@zacelder46]

Motordyne G35 I have a 2004 g35x sedan no rev up, will this work? Actually moving to Arizona and driving my G across country

[@954_vqmike3]

Pcv delete instead of a open catch can any good cause I still eat oil , cause I rev it out hard

[@_xspec]

I just bought a g35 with the DE engine, I’ve had trouble with oil consumption so bad that I’ve had to put at least a quart every week. I do use the vehicle as my daily and sometimes for a spirited drive every once and a while. I really do appreciate this video so much. I hope it solves the issue.

[@hitmovies8369]

Did it worked for you?

[@ronbocklage7245]

Yo did it work?

[@addisongarcia7238]

Did it work??

[@_xspec]

@@addisongarcia7238 I’m a bad example, I believe my engine will need a new pistons rings but I did notice a difference.

[@BAPTruckin]

@@_xspec Cheaper to put in used motor then rebuild. Look for some under 150k miles.

[@robertpoirier8520]

I have two 2005 Xterra’s. As you know , same VQ, but bored to 4.0. One has 385,xxx miles and the other with 210,xxx miles. Neither burn a drop or leak any oil. Why the difference?

[@justinmcclure5484]

Getting catch can this week. It's not vented would I still be fine putting the same setup as you?

[@TheZeromaz]

what is your plenum covered in? looks like some type of bed liner. its neat

[@chrisnas1483]

Where do i find the diagram to buy the hoses to do the catch can, i just bought the can an the -an , plug?

[@Spoonz9000]

I'm planning on doing this very soon! I'm wondering though how the hell you did a brake stand at the start of the video! How did you bypass the fuel cut when you hit the brakes?

[@Pastechiii]

I know you posted this 2 years ago but under the steering wheel to the left there’s a fuse box, just pull the stop lamp fuse, disable vdc, and burnout for days! Keep in mind that fuse is responsible for your brake lights being triggered when stepping on the brakes so just be sure to put the fuse back in when you drive on the streets!

[@chukwuemekaonyema2716]

I heard you want your catch cans to be same height as where the tubing starts so the oil can properly get in. Yours kind of goes up before going back down to the catch can. Assuming this has not given you an issue? Also, the vented catch can is different from how things were back in the day as far as how the vapors get in the air since you have that filter at the top of catch can. How often would that filter need to be cleaned/replaced? If I bought a VQ35 motor, do I just need to make sure I have good compression, then slap this on to avoid related oil consumption issues? Meaning if the pistons/rings were somewhat bad, would this save my motor in a way?

[@jamesfarmer5349]

No, if you already have pretty bad oil consumption then this will only delay some of the consumption. It isn’t a long term fix or even a short term fix at that. It helps but the VQ has that flaw that can’t be fixed with only catch can. I recommend changing head gasket, and cleaning out piston rings before adding the catch can as that will guarantee a longer oil consumption rate. Anyway I have a 2004 Nissan 350Z, around 107,000 miles and it burns oil moderately but then again it also depends how hard you drive. It’s my baby so I only drive it hard sometimes not too often. For me I burn around 1 quart around 2-3k miles which is significantly better than when I didn’t add my catch can and cleaned out the engine. Good Luck

[@KenHMladin]

These VQ motors really start using oil when the cats are starting to go bad, Especially the rev Up, which leads to galley gasket failure and or oil pump failure. If you have no other issues the catch can will help alot. Great Video ! I deleted cats, Did timing kit, galley gaskets, oil pump, water pump, and a catch can. It still uses oil, but i drive 100 miles per day for work. i had alot of people tell me not to plug those ports but i think there full of S**t . that is a beautiful G !

[@Mohdr121]

do u still have the car? can you explain how bad cats cause oil consumption? lol

[@sircefiro]

Some countries have warrant of fitness testing & a vented catch can can be failed for emissions so may be why some are running sealed

[@TomKaosOfficial]

I think your channel will give me more motivation to mod my Daily 05 g35 once i start warching more of your vids lol, Ive had it for 5 years and always planned on a Skyline (of which ive owned for a year now) & never really put in major work to my G to make it reasonably better, besides exhaust and plenum spacer & just taking care of maintenance etc. If you have more documentation of Exactly how your catch can is set up (since you said theres little more to it) feel free to contact/tell me 👍🏻

[@MotordyneG35]

Tom Kaos (Official) ....thank you. Here is exactly how I have my vented catch can setup. Only difference is I tucked my vented can behind the windshield washer fluid tank. It is just hanging there supported by 2 rubber hoses running to it. kzbin.info/www/bejne/sHLTkomAo9Kclbc

[@TomKaosOfficial]

+Motordyne G35 Thanks sir 👍🏻

[@ryananonuevo5431]

Watching these videos has me missing my G. Today, I got hit from the back by a Tesla while I was turning into a gas station. From what I was told my insurance company most likely will total out my car but they will cash me out the blue book of my car. It hurt my heart seeing my Car smashed like that. I’ve had my G for -“almost 5 years now and not once did I have any problems with her. That just shows ab

[@xs6212]

Very informative, thank you. Being a frenchie, there's a few things I'd like to confirm with you to make sure I install everything correctly. So to start off, I would need to plug the intake tube port and the "front" pcv port. The other pcv port (the one with the valve) would be connected to the vented catch can. Finally, to complete the system, a hose would go from the catch can to the driver side valve cover. Everything is clearly shown in the video except for that last part: where exactly would I have to plug the hose going from the catch can to the valve cover? I'm guessing all I would have to do is to follow the hose that was originally plugged on the intake tube in order to find it? I'm no mechanic so sorry if my question seems a bit dumb

[@MotordyneG35]

Here you go, watch the whole video and this is from a professional tuning shop. kzbin.info/www/bejne/sHLTkomAo9Kclbc

[@xs6212]

Motordyne G35 great thank you

[@gmbboys203]

Have you ever took a long road trip with catch can, I have and I had pressure build up and blew my drain plug; not sure if can and lines were too small or what. It worked fine until I took a road trip on highway.

[@MotordyneG35]

gmbboys203 ....over 50,000 miles on my VENTED catch can. Yes, I take road trips all the time to California so 330 miles plus, no issues ever. Not sure what you did wrong.

[@teamunicorn9389]

Your intro, what hwy are you driving through?

[@jayb7796]

Possible to get links to everything needed to do this? Thanks!

[@fredwilliams7893]

This also, like you said, applies to Infinitis as well. For instance my 2008 M45 Sport is notorious for oil consumption. In fact the engineering data for the VK45 IS A QAURT EVERY 600 MILES IN NORMAL. WTF? 😂

[@nkastis8211]

thanks so much wasn't sure if there was 2 pcv valves or not....so if I delete my passenger side and have a vented catch can (plenum port plugged up just like the intake port) my hose just will connect to the drivers side valve cover with no modification? pretty much I'm asking cause I saw a pcv delete video and the guy drilled out the pcv himself and hollowed out the passenger side but I don't remember if he did that to the drivers side or if he jus vented it with a filter (like he did to passenger side) sorry if little confusing thank God you posted this video I was about to buy a non vented catch can or install a jegs air oil separator look at the videos on them they don't have one for g35 but watch the Evo video and you can see how well it works and I know this because on Amazon on he jegs separator a guy posted a pic of it installed in-between the plenum and pcv valve and says it's great and catches every bit of oil I was even thinking of installing non-vented catch can end then in between the couch can and the plenum installing a Jegs air oil separator just to make sure I get every did of oil and sludge that could possibly go back into the plenum.... let me no what you think check out the Jegs separator on Amazon and look at the reviews the only pic on the reviews is it installed on a g35...

[@MotordyneG35]

My opinion on Jegs air oil separator? Ummm....worthless. With both ports plugged, oil vaper can NOT get into the system. Jegs air oil separator is for a closed system, not a vented system. Both ports plugged is better than any separator, the path of entry is completely closed. The picture in the video, is a hollowed out valve that comes that way. No drilling required. You can still use the PVC if you want, but a PVC delete is better. Yes, the driver side will connect, but the hose will not be long enough. Bring your old short hose to the parts store, find a hose that fits to your desired length.

[@randykelly9138]

Good video thank you.

[@Slavikhavoc]

How's the torque on these? I'm thinking of getting one

[@nkastis8211]

thanks again for all the info I just watch that other video an wanted to see your opinion on the PCV delete cause in the video he said when you do a PCV delete you are going to need to either tune and/or an idle relearn or w.e he said usually cause the car will act all funny with the delete... did ur car need any of that at all?

[@MotordyneG35]

No tune for a vented catch can.........bhahahah. He said you may need to do an idle relearn and NO, I did not have to do anything after the install. No tune, No idle relearn, absolutely nothing.

[@matthewwebb9663]

What size are the rubber hoses you used for the catch can?

[@coreymyles924]

what type of body kit do you have if any and what year is your g35

[@my73737373]

Will installing a vented catch can or not vented one make you fail safety inspection or emissions testing?

[@AM-le7eh]

I'd like to know that too

[@jabreepatterson7892]

Thanks sir.

[@Ashamp5207]

Does the same apply to the non rev up automatics?

[@xxYFKxx]

Hi I’m a few years late on this video lol. By the way, where did you put the other hose that was near your intake for the oil catch can? I just recently installed a catch can myself & im definitely going to do it your way. I understand it’s like in the driver side of the valve cover I just don’t know where it’s located. Thanks in advance.

[@fleco9229]

Did you figure it out I need help too

[@madmarlone]

Nice. Subscribed:)

[@MotordyneG35]

I appreciate it, thank you!

[@TehZaydo]

Did you buy two of the hollowed pcvs for this?