installing a regulator and manifold for a house that will be repiped in the future

[@timothyfruhauf611]

I love the use of as many different tools as possible just to bait the trolls

[@Eargasm4all]

😂

[@tiggit830]

Makes no sense but someone likes anyway.

[@moecaddyBK718]

😂

[@yyiii276]

Good to see you know how to stop the drill on the inside before blowing out the exterior wall. In this case, stucco, which is bad shape anyway, but you did not add to it. Good professional work.

[@BLACKMONGOOSE13]

I want to be a plumber so I can justify a van full of Milwaukie tools which would be convenient for many other things when I wasn’t plumbing. 😁😎

[@cIick_bait]

as you can clearly see its easy to be a plumber when you use propress everywhere

[@KevinfinityDrums]

try HVAC

[@dpz9872]

​@@cIick_bait Poop press. 💩

[@00fordxlt]

​@cIick_bait well I'm not a plumber but I bought a propress and repiped my house to justify buying it 😅

[@duckyjp17]

I don’t know which I like best: the voiceovers, the music, or the special helper videos. 💯

[@replumb]

Thanks for the feedback, glad you enjoy it!

[@dstrees2315]

Dudes tunes are on point.

[@badmaniak]

i hate all of it. because this is against many laws.

[@dstrees2315]

@@badmaniak well we all hate you

[@davidboyle9732]

i enjoy being able to visualize the soil profile on these jobs

[@dieselchild]

I’m so glad to see Led Zeppelin spanning across more and more generations. Great videos btw!

[@she219]

I love your plumbing Installation.....

[@George-yd7cx]

You would love it more if the prv was right out next to the meter box to get the water pressure off the water lines asap

[@greatnew_products7436]

Hey Boy! You either glue or crimp or solder, but not THE 3 BOY!😮

[@chipchipperson12]

Bring back the voice overs!! It’s what makes your channel the best. PLSSSS

[@theheyseed]

Must be warm there. Nice work

[@guentherwilke2055]

Wait- did you glue PVC into copper? Is that an adapter with a PVC sleeve inside?

[@robertgiven8075]

Yes that pro press tool wicked expensive but very handy and cool when you get it.

[@demonicdonut22]

Honest question. Why solder one valve and press another? Just what you had on hand?

[@replumb]

Yep

[@Joseph-eg4ff]

What kind of adapter/coupler did you use to go from copper to pvc with pvc glue?

[@Joseph-eg4ff]

After scrolling through other comments, I found they are called sioux chief metalhead

[@JBfromKY]

Some Led for the job! Can't go wrong there.

[@MikeyMack303]

I thought they did away with led plumbing.

[@S1L3NTG4M3R]

well... I'm no plumber, but I learned so much from this video, so Thanks!!!

[@beeblebeeblebeeble]

Where do you find those copper to pvc glue adapters? I’ve asked a couple supply houses and they look at me like I’m crazy

[@sunshine3914]

He had responded to one saying it’s a Sioux chief metalhead?

[@jrod332]

My kind of plumber. Keep it up bro!

[@replumb]

Thanks, man

[@joshw9037]

Dudes music selection is amazing

[@Turfscaper]

I like the sch80 PVC transition to metal 🤙🤙🤙

[@gregoryderosa8045]

You cut that scheduled 80 nipple in half and glue it in the fitting? Thanks.

[@replumb]

Yep

[@sunshine3914]

That crimper is so satisfying.

[@_JoeMomma]

“Great, drilled right into the stucco” -Walter White

[@replumb]

😂

[@cmorndorf]

Is there a special name for that copper to pvc piece? I don’t think we have those in my state.

[@replumb]

Souix chief metalhead

[@Whateverinterestsmenow]

I may be missing something. I also don’t watch a lot of plumbing stuff and I’m very new to most pipe fitting. You are using purple primer and then putting the joint together. Is that glue as well? Where do I get that? I might have just missed the glueing part but it looked like only primer

[@replumb]

Edited out the application of clear glue

[@Whateverinterestsmenow]

@ oh ok. Makes sense now. Thank you.

[@N3r0512]

Did I spy a missed quarter turn of the pvc pipes when gluing into fittings? Do you think it actually makes a difference?

[@replumb]

If you look closely I did to the 1/8th turn as recommended by the solvent manufacturer

[@drb83]

Love ur vids dude.

[@replumb]

Appreciate it.

[@BrandonHorning-d4o]

Why solder and press?

[@Edc1969]

Good job, but I always Close the ball valve before torching it.

[@liquidmagma]

That's backwards.

[@Edc1969]

@liquidmagma wrong

[@liquidmagma]

@ Nope, correct. Closing the valve to solder is stupid.

[@Edc1969]

@liquidmagma lame! Get solder in the gate, melt the internals, and ruin the valve. I've been plumbing for 40 years, installed thousands of them. Keep doing what you're doing and gain a terrible reputation! Pathetic!

[@liquidmagma]

@@Edc1969 Sorry, Karen, you've been doing it wrong for 40 years. Trapping heat at the ball is a stupid idea.

[@BillWalters77]

How do you solder that shut-off valve without screwing it up?

[@liquidmagma]

Ball valve. They can take the indirect heat.

[@danielmatthews4262]

ERRRRRRR i like the voices, but I also love Led Zeppelin.🤯

[@robertsherwood4871]

Now that's the way you do it good work sir

[@TOOL_TECHNICAL]

dont forget to open your ball valves fully as fast as you can :D

[@michaelcarter3127]

This one will get the jimmies rustled for sure. ⭐⭐⭐⭐⭐

[@deshelly_athetos]

How this cutting electric tool called ? You using so often and I never saw a tool like that

[@hepparade]

THANK YOU FOR NOT GOING THROUGH THE CRAWL VENT!

[@krisdphillips]

Glued PVC fittings, ProPress Copper Fittings, and soldered fittings......used a bandsaw to cut one pipe and then a pipe cutter for literally the pipe next to it. The man has gone full villain and must be stopped.

[@wm79198]

So you’re basically just getting water from point A to point B? Plumbing looks easy

[@replumb]

That’s it👍🏻

[@jeffhudec8583]

😮 Bravo

[@ericerto8250]

I love the music u always use

[@mattman7773]

See you’re using that new band saw 👍

[@TechAround007]

Please send us your music playlist or make one on youtube

[@morningcoffeeOW]

my man has good taste in music 💪

[@Forrest-Jackson]

Of course the plumber would install every pipe and valve of the assembly in front of the crawlspace vent that will have to be reinstalled.

[@replumb]

Not my problem

[@Forrest-Jackson]

@@replumb 🤣😂🤣

[@Jlitt-yw2zm]

I didn’t know this guy knew how to solder😮😮

[@tier1solutions28]

This is youtube, so i am stopping by to tell you that you did it wrong. I have no experience myself, but i can feel it.

[@weaverjoshuab]

Put wet rag in ball valve when soldering.

[@kittytice]

hey boy! still kicking ass !

[@NTATchannelNickTaylor]

A fool in the rain...

[@DragonSt3alth]

I know you get this comment all the time, but i love your taste in music!

[@replumb]

Appreciate it! Thanks for watching

[@texnikmexanik8086]

what is glue?

[@replumb]

Clear

[@r0000g]

What's the black tube for?

[@replumb]

Sleeve

[@Mercyless301]

Hey boy, how come I always see these other wanna be plumbers, trying to steal your video editing style?😂

[@freedomconstruction]

I enjoy all your content but I really miss the voice overs!

[@replumb]

Less talking more action

[@sunshine3914]

Heard one, you’ve heard them all.

[@kyriakossolomakos7585]

I watched this video because I haven't heard Fool in the Rain in years :)

[@mlong9475]

In the beginning why use two different tools to cut the tube? Could have just use one of them twice. Why switch?

[@replumb]

Just because

[@NickJPDT]

Could have put a couple supports somewhere, or no?

[@replumb]

It will be strapped in the crawlspace. Doesn’t really need any other support

[@Bob-n2d]

Another perfect video

[@replumb]

Glad you think so!

[@greatnew_products7436]

Get the Led out!! 🎵🎶🎵

[@J_S0711]

Look at this, he keeps posting and he keeps crying

[@wamzamsauce9120]

I solder my pressed fitings

[@MrPatrick5150]

What a great song

[@Zdabmurz85]

Never know what the hell your doing but I like watching and jammin. Is that cool?

[@replumb]

Of course. Stay as long as you’d like

[@stevetheplumberbreeding7402]

Ill stick around in spite of the Propress😅

[@MikeyMack303]

Robert Plant is looking for you!

[@OldtownGP]

Clean bro

[@patrickburke6393]

Need to make you a T 1/2press x 1/2 shark bite 1/2 sweat just for the trolls

[@Heater4]

Bangers Is Back 🎶🎵

[@MrDavid486]

He did 8 applications to 8 different materials using 4 tools smh 😅😂

[@lukes2219]

Woah liquid pro press

[@robertjameson1959]

I don’t like how the black tube is so much bigger than the white tube. Harmful stereotype… I bet it runs faster, too!

[@BlackShepardTactical]

Shiiit. That's how it's done

[@poppingt4gs]

When you need to justify your tool purchases 😂

[@George-yd7cx]

Who would want that eyesore on the outside of there house

[@replumb]

Almost every house in CA has it

[@George-yd7cx]

Including million dollar houses ? If so there not very bright 😂

[@michaelduarte9394]

Didn’t clean the pipe for the pressed fittings bratha

[@replumb]

Don’t need to 🤙🏻

[@michaelduarte9394]

@ don’t gotta wash your ass either but you probably should

[@Motorhead-bv5lu]

Led Zeppelin…that’s better

[@drewmasondom]

Solvent press solder why not throw a compression joint in there while you’re at at maybe a saddle valve too? Just a suggestion

[@replumb]

Transitioning to pex in the wall too

[@drewmasondom]

@ go get em

[@jacobaguilar6756]

Why sweat and press just sweat the dang thing

[@rkhanji]

Love the copper encased in pvc. Music, not so much

[@jetfirers5139]

Aye boy... lol

[@samfish6938]

Van tools get stolen another $10,000 down the drain

[@S1L3NTG4M3R]

:)

[@stevomatico]

Reeeeeeeeeeeeeee