Jeff and Matt are at it again this time to fix the turbo on the idi... can they do it??
Пікірлер: 50
@kylehill26825 жыл бұрын
Love the videos It’s hard to find good build videos on idi
@Grewsum2Sum5 жыл бұрын
That's exactly why I started doing it!
@race5050R14 жыл бұрын
Great job whole build. It’s a PITA working on turbos in thes trucks due to limited space. At least you took hood off. It’s more a test of patience than anything. Again, great job.
@Grewsum2Sum4 жыл бұрын
Thanks! Yes compared to other vehicles, this is probably one of my least favorites to work on 😂
@edrake19894 жыл бұрын
Love it keep the idi's alive! Mine is still stock not looking to do anything to crazy would like a little more power. Stock 7.3idi factory turbo.
@jaredkays17825 жыл бұрын
Awesome build and dig the Tribal Seeds background music
@camelotdream4 жыл бұрын
Thanks for the melow (non stupid) music for the fast forwards!
@jjelgallodeoro74025 жыл бұрын
The truck is bad ass
@Kingz_7.3 Жыл бұрын
Whats al done to it
@kdo581 Жыл бұрын
What did you use for a oil drain tube?
@Grewsum2Sum Жыл бұрын
I used a fitting r&d supplied in their turbo manifold kit that glued into the valley pan where the cdr used to go. Where my turbo sits, it goes straight from turbo down into the valley pan fitting
@FueledAddiction4 жыл бұрын
Did the stage 1 cam get rid of the knocking sound of the idi I really can tell from the video
@Grewsum2Sum4 жыл бұрын
Watch my idi dyno video you can really hear it there
@FueledAddiction4 жыл бұрын
@@Grewsum2Sum so would you say it got rid the the knocking sound or just it just give more torque
@rodrigodiaz83304 жыл бұрын
Would you ever be interested in doing this build for someone else?? I have a stock 1993 f350 7.3 idi non turbo dually 2wd automatic about 240k original miles
@Grewsum2Sum4 жыл бұрын
Yes but sadly as of now, we really don't have the time or space to take on such a large project for someone else
@rodrigodiaz83304 жыл бұрын
@@Grewsum2Sum If you ever change your mind I've be willing to travel to you drop off the truck coming from Houston,TX. Take all the time you need for the build. Weeks or months...I'll fly back to pick it up when its ready.
@Grewsum2Sum4 жыл бұрын
@@rodrigodiaz8330 you should call justin at idiperformance.com i know he builds engines for people and that's where I i got all my knowledge from hes a great guy
@chriss42683 жыл бұрын
Would have been nice to see a step by step build🤔 Keep in mind even "Professionals" make mistakes👌
@Grewsum2Sum3 жыл бұрын
There are 3 other vids of putting the engine together
@chriss42683 жыл бұрын
I do apologize I was thinking that this was a video on rebuilding the turbo itself...
@Grewsum2Sum3 жыл бұрын
@@chriss4268 sorry! I didn't think it was worth making a vid cause there are so many other hx35 rebuild vids already
@chriss42683 жыл бұрын
I understand and thank you for responding I recently bought a 93 F-350 turbo diesel and I decided to rebuild the turbo, replace the glow plugs and injectors new fuel return lines new wiring to the glow plugs and now I am finding it impossible to find a replacement grommet for the valley pan its always something but where there is a will there is a way!!! Hope you have a great day!!!
@Grewsum2Sum3 жыл бұрын
@@chriss4268 call Justin from r&d and talk to him he will definitely be able to help, or russrepair
@crayfishtsi925 жыл бұрын
Where are you venting your crankcase/blow by. Do you have a cdr valve or just a draft tube?
@Grewsum2Sum5 жыл бұрын
If you watch part 4, at the end I show how I routed my road draft tube
@crayfishtsi925 жыл бұрын
My bad I skipped 4 to watch the dyno video I just wanted to see the money shot.
@Grewsum2Sum5 жыл бұрын
Haha no worries
@stek963 жыл бұрын
after the turbine rebuild , the turbine shaft must be balanced on a special stand, because the turbine develops more than 100,000+ rpm,vibration can kill her
@Grewsum2Sum3 жыл бұрын
The wheels were balanced previously to rebuilding, it seems like its holding fine 🙂
@stek963 жыл бұрын
@Grewsum 2Sum I think you are a big lucky one)👍 my turbine blow up, cold wheel
@Grewsum2Sum3 жыл бұрын
@@stek96 ouch
@dustinalexander84794 жыл бұрын
What kind of fuel mileage are you getting on the new setup have you tested it?
@Grewsum2Sum4 жыл бұрын
I was getting around 13-14mpg average with 4.10s and a zf5 I just switched it to 3.55s and I'm in the middle of my first estimation now
@The73idigarageАй бұрын
@@Grewsum2Sum13-14 at what spd & rpm?
@Grewsum2SumАй бұрын
@The73idigarage around town driving. Highway it gets around 15 at 2200-2500 rpm at 80
@RoyFabian5 жыл бұрын
I just noticed the borduin paving shirt! I know them!
@Grewsum2Sum5 жыл бұрын
Lol everyone does the owner came over one day and handed us some shirts he lives around us and is a big fan of our vehicles and what we do to them
@RoyFabian5 жыл бұрын
@@Grewsum2Sum yea i live a town over and i hang out with his son. Your videos make me miss my old beat up idi f250 i used to have. I pulled 10k lbs with it once. Non turbo, just exhaust, intake, and turned the ip up. Wasn't very fast at all, but it definitely got me there. Love these engines
@Grewsum2Sum5 жыл бұрын
@@RoyFabian yea I just couldn't handle not being able to go up grades on the highway without losing 20+ miles an hour
@RoyFabian5 жыл бұрын
@@Grewsum2Sum i got an f150 now with a mild 300 six. Not fast either, but does ok. Towed 6k for 300 ish miles and and averaged 13 mpg at 65-70 no problem.
@Grewsum2Sum5 жыл бұрын
@@RoyFabian that's cause straight 6's are the best lol if I were to do it all over again it would have gotten a cummins but for some stupid reason I like to be different
@jeffflanagan28145 жыл бұрын
What is that up pipe set up?
@Grewsum2Sum5 жыл бұрын
It's a downpipe actually from R&D I just put it up for fun next video will be about flipping that pipe around
@jeffflanagan28145 жыл бұрын
@@Grewsum2Sum I mean your actual up pipe set up, from the manifolds to the turbo. Is it the R&D?