DIY Wheel Center Caps For RPF1 Wheels! Super Easy!

[@TheSmitty-js2rj]

Oh my god. Freakin Electric block knock outs. Never even thought. Was trying to justify paying 76 dollars for new center caps😬 thanks for the vid!

[@AJ_Boyce]

This worked amazing on my aftermarket wheels. I don’t have rpf1’s (I’d love to have some though lol) but for $1 a piece you can’t go wrong. Haven’t had them fly out of the wheel but they are definitely in there tight. Thank you!

[@krankertigaz]

thats exactly what im going to do, I didn't find my money in the trash bin to justify paying 100 bucks for center caps.

[@30kendel]

That is awsome!!! So creative!!

[@j0oftheworld]

Good work! 👍 On race wheels I usually just paint the hub black so the rust doesn't show.

[@Wooden_Hammer]

Yo that’d be dope if you get something custom engraved on them!

[@BDoh]

Good to hear you were able to sand them enough to remove the embossed lettering. When I did this a few days ago I decided to vinyl wrap them for that reason. Painted looks better so if you were able to sand them enough I’ll probably pull them off and spray them.

[@ColoredinLight]

That and adding a couple thick coats will fill everything in!

[@Hurricanetongue]

Why did you not clean the rust before putting center caps on? Are we suppose to clean the rust in the center?

[@wg5768]

I did the same thing with my RPF1 'S . KZbin is great for finding great tips like this. Enkei center caps are way over priced.

[@feelthatfeelthat]

Wow love the stance on your miata. I did this center cap trick a few years ago, i just ended up painting them silver. Doesnt match the colour on the wheels though so perhaps ill paint them black later.

[@ColoredinLight]

Thanks! I like the black since it's not the prettiest solution and doesnt draw much attention. I have though of color matching though too

[@feelthatfeelthat]

@@ColoredinLight if you ever find the correct silver colour let me know pls :)

[@kctsp6631]

Good video Bro! thank you for sharing. Its what I need for my wheels.

[@abikukinte]

lol... I sorted myself out worked wonderful

[@mcgarfieldvicente4100]

What do you called to the one that you substitute for your center caps?, and how to know the size of the center rims to put the caps on?

[@DjCyriss]

What size rpf1's do you have on the back and what's the size of the rubber too? The stance looks really good and I love it. A little meat on the tire is always nice.

[@theheaterguyryan5052]

I got seat leon center caps but they are too small is there anyway l could fit in them they are 56mm and they should be 60mm l like the style and colour of them

[@Jamie-pf9jv]

Thanks for the tip. Fyi an Na Works on the front but not on the rears due to the axle nut protruding…just Incase anyone has an Na .

[@Miltonfrank39]

Great job👍🏼💪🏼

[@sun6v546]

That eeeeeeezzzzzzz a very good job done mate , love it brother .... >>>> :)

[@markpelle894]

Beautifully done, thanks ;)

[@juanverduzco8085]

I got an ND, that's why I subscribed

[@ColoredinLight]

Thank you!

[@jeancarloramos7576]

What size was the center bore

[@troyriderzsquad2158]

In one of your videos you ordered an oil dip stick for your upcoming 2.5 swap. What oil dipstick is this and why do you have to change it? Thank you.

[@ColoredinLight]

Different engine size. I think I showed the part number in the video

[@troyriderzsquad2158]

Colored in Light so the stock oil dipstick from engine donor won’t work!? Thank you for the help.

[@ColoredinLight]

Nope, need the 2.5 one

[@troyriderzsquad2158]

Colored in Light the engine I got is a 2.5 L out of a 2015 Ford Fusion. Reason I ask is because we have to re-use the 2.0 oil pan out of the stock Miata engine. So not sure why we can’t use the oil dipstick from the 2.5 L swap engine.

[@troyriderzsquad2158]

Colored in Light the engine I got is a 2.5 L out of a 2015 Ford Fusion. Reason I ask is because we have to re-use the 2.0 oil pan out of the stock Miata engine. So not sure why we can’t use the oil dipstick from the 2.5 L swap engine.

[@MrHyP3R1]

Do they have 3 inch seals?

[@zacb3324]

You make me want to start yt my Miata

[@pasioness1846]

I saw one of your video. Your rpf1 is black and now its silver. I just want to know if what type of colour did you chose. Is that glossy or matte.?

[@ColoredinLight]

You can choose whichever color you want, it doesnt have to be the same thing I did.

[@pasioness1846]

I want silver but I think its better when its glossy

[@pasioness1846]

I have rpf1 and its black then i changed the color to white. I'm planning to repaint it again to silver. I think glossy is better than matte.

[@RobWhittlestone]

Cool mod - DIY at its best! The wheels look so classy now! All the best, Rob

[@ColoredinLight]

Cheap and easy!

[@scamchan]

WOW for all the time and effort he could have ordered 4 already done that would fit..

[@ColoredinLight]

Lol

[@tmariepi1472]

Great idea and great video! Is the diameter of the front exactly 2 inches? I'm looking at the part on Home Depot and it says height and width are 2.688 inches.

[@ColoredinLight]

I'm not positive, but I bet if the part numbers match, you should be good!

[@tmariepi1472]

@@ColoredinLight Ok. Thank you!

[@carbonuser9810]

Thanks man!

[@humbertovilla7360]

Genius thanks for sharing!

[@ColoredinLight]

No problem! Thanks for checking out the video!

[@David..832]

Do you still have them or did they fly off?

[@ColoredinLight]

Still on

[@David..832]

@@ColoredinLight Good to know. Being an electrician, I know how flimsy they are, but as cheap as they are to buy more, good deal👍 Not criticizing, I'm about to use electrical tape to make my hubcentric rings bigger. Whatever works huh?

[@ColoredinLight]

The rpf1 caps are like 60 bucks! I'll take the cheap solution any day especially if the worst thing is they fall pff

[@David..832]

@@ColoredinLight I heard that👍

[@angeladierckx8781]

really nice diy!

[@ColoredinLight]

Thanks!

[@c.h.a.n.veeraphattarakul9588]

Brilliant

[@vulturetribe6866]

check our video for custom rpf1 wheel cap

[@nlbb373]

Does rpf1 bent easily?

[@fiercenet]

no

[@DjCyriss]

Only if you live in Baltimore, MD 🤦‍♂️ My first bend was when I was bedding in my new brakes and I was driving slow, like 25 mph. Rolled over this thing called bottomless pit and 2 days later I was still climbing out. When I was at work the next day is when I seen it and it was like getting kicked in the hotdog 😲😲, nothing helps. Complained to the county/city and they threw me back in the pit. Legend has it till this day on a quiet dark night you can still here me cry and ask for 1 more stimulus check. Damn loch ness monster ask me for tree fiddy.

[@jessegutierrez1869]

Bruh this is gross

[@ColoredinLight]

Bruh

[@jessegutierrez1869]

Colored in Light shouldve not cheaped out

[@ColoredinLight]

@@jessegutierrez1869 😂 yes master, o holy one.