Jeff, just want to take a moment to say thanks for taking the time to put out these videos. Very very helpful for newer riders like me playing catch up on the learning curve.
@slaverace12 жыл бұрын
Glad you like them!
@blarpieman8 ай бұрын
@@slaverace1 You really offer so much value and we all appreciate it! I placed an order last month with you and those caraway pegs are so fricken awesome Jeff. Staff was amazing too!
@dodgerspeople35762 жыл бұрын
No ego problems here, 57 and using every cheat I can afford ! Rekluse and LHRB out east are game changers....and that JX8 let's me tackle rock gardens I never could before on my measly 200xcw! Thanks for more great info.
@slaverace12 жыл бұрын
You're welcome.
@limbandtreeremoval8 ай бұрын
Lhrb?
@gmoney6595Ай бұрын
Left hand rear brake.
@whiskeythrottleracing2 жыл бұрын
Great minds think alike! Excellent run down on making your ride safe and enjoyable. Thank you , Jeff! Keep on rockin'
@waynemodesitt34452 жыл бұрын
Tubliss and good suspension (MX Tech Lucky) has become priority for me. I'm 65 and having a well set up bike makes life good. Thanks Jeff for all the good videos!
@slaverace12 жыл бұрын
You're welcome.
@byronstuck53812 жыл бұрын
Another very helpful video to remind me of ALL the things I need to keep an eye on in search of "the great ride" ... Thank you Jeff
@firffighter2 жыл бұрын
Another great video Jeff It's so fascinating how little "real" information is shared on the shallow KZbinr's and Instagram guys vs the solid, foundational, quality information from experienced guys like Jeff.
@slaverace12 жыл бұрын
Glad you enjoyed it
@MikeRay1978 Жыл бұрын
Gosh it’s good to hear what I’ve been experiencing from someone who is as good as you are. I’m 6’3” tall and weigh 340 pounds. I’ve said over and over there’s no point in me trying to crank the bejeebus out of suspension that isn’t going to work for me anyway. I’ve had two bikes resprung from my weight. Each time it was like riding a new bike and you CANNOT get that from a spring made for half of your weight. I found this video because I just picked up a 2018 300 xcw and will be ordering a spring set next Tuesday. After I can put all my gear on and get on a scale.
@slaverace1 Жыл бұрын
Thank you.
@SwormCycles2 жыл бұрын
So being this was basically a "basic's" vid for mostly newer riders on suspension mistakes, the one thing I got out of it was that your web site has suspension spring rates!! Who knew. It was also an eye opener that you mentioned using the riders TOTAL weight with gear where other sites I've used (RT, etc) only mention riders weight and I always thought that was off. Even with progressive spring rates mentioned by others, it still feels too soft for me. I'll be going to your site right away and see what it says my rates should be for my ride level, TOTAL weight and types of terrain. Thanks again.
@slaverace12 жыл бұрын
Hello: It is a "basics" video but applies to all levels of riders. I see plenty of upper level riders with horrible suspension set-up. Our website has anything and everything you could possibly need for a KTM, HQV, GasGas, including accurate spring rate charts. The RT calculator is a joke as are other calculators. The purpose of springs is to support the combined weight of the bike and rider (including gear) and has little to do with rider skill level or types of terrain. If you are an advanced rider you might need stiffer valving but not stiffer springs than recommended on the charts.
@wheelieking712 жыл бұрын
Excited for another suspension balance video. Your last one was excellent. I am a HUGE (old and half crippled) dude. I struggle getting the chassis balanced.
@slaverace12 жыл бұрын
I'll try to provide helpful content in my upcoming suspension balance video BUT being a heavy duty guy makes little difference in getting a balanced set-up.
@dougderby94542 жыл бұрын
Jeff really hitting the head on this topic. I also don’t ride other guys bikes or let anyone ride mine. When they do insist and I take a quick spin. I can’t give their bike back fast enough. Many suffer from moditis. If they had a stock bike they would be miles ahead. Guessing many never rode their bike when it was new. Immediately they tear it apart and get the suspension all tricked out. Bar risers and do dads that mimic the biker gang in Every Which Way but Loose. Don’t even start on tire selection and air pressure. I am just out to ride my bike and maximize my time. Good video Jeff.
@slaverace12 жыл бұрын
Thank you.
@UnicornMoto29 күн бұрын
Tons of great information thank you!!
@slaverace123 күн бұрын
You're welcome.
@KevinBrown-hx2ht2 жыл бұрын
Great video! Let’s add one to the list. Banjo tight chains have a negative affect on swing arm travel and balance while riding.
@Deadlyshu2 жыл бұрын
Wow what an excellent video thank you Jeff!!! So much useful information in this!
@rposton9192 жыл бұрын
I had a 'professional' change my fork springs. On a whim I decided to check his work(always do that). I had to buy a huge breaker bar to loosen the triple clamp bolts. Stop over tightening everything, you'll be glad you did in the future.
@slaverace12 жыл бұрын
Hello R: I don't over-tighten anything.
@rposton9192 жыл бұрын
@@slaverace1 Wasn't referring to anyone in particular.
@apospical2648 Жыл бұрын
Thanks for all the time and effort you put into your video's. Question: why the Blackjack front shocks? Suggestion: you should do a shop tour of your home shop there. Us gear heads would appreciate it
@stevebaum2 жыл бұрын
Some very thought provoking stuff, thank you. One thing I don’t grasp well is REBOUND clicker adjustments., especially on the rear,( but both really). I can seem to settle on a good setting w/ my 21 KTM 300 xc-w. Stock components…
@slaverace12 жыл бұрын
Steve: What do you weigh without and with gear?
@stevebaum2 жыл бұрын
@@slaverace1 170lbs. in a bathing suit; full gear on a local 1/2 day ride = 210lbs and on a long distance all day ride up to 220lbs (full packs on back).
@stevebaum2952 жыл бұрын
@@stevebaum Oh, I may have mis-spoke, Its a stock shock w/ a 66 progressive spring. ( I have a Slavens Mule Lucky Cartridge going on the front soon. )
@dznnf72 жыл бұрын
Great video again, Jeff. Thanks for passing on the knowledge!
@slaverace12 жыл бұрын
Any time!
@whoscook44812 жыл бұрын
Awesome advice! Im only 55 and thank you Jeff! Life is good!
@slaverace12 жыл бұрын
You're welcome.
@richardhartley17052 жыл бұрын
Man your seat looks comfy Jeff.. good useful info👍👍
@slaverace12 жыл бұрын
It's the most comfortable seat there is for dirt bikes. slavensracing.com/shop/complete-comfort-seat-for-ktm-by-seat-concepts/
@jacobbutler3522 жыл бұрын
Looking forward to the video on sag!!
@emtboldguy95852 жыл бұрын
I’m with you on the 1/16 of an inch. I always crank it down so it feels just a tad stiff. Super sensative
@conradkelly8101 Жыл бұрын
He means 1/16 of a turn, not inch
@MotoMission.8 ай бұрын
I love learning from you Jeff. This is good info. Will tell my friends
@slaverace18 ай бұрын
Please do!
@endurok39pnw Жыл бұрын
"The list goes on and on and on" :) that about sums it up!
@BraaapoholicBob2 жыл бұрын
Jeff another excellent and informative video! I think it’s awesome that you have been successful and have paired back your workdays for riding! Good for you sir!
@slaverace12 жыл бұрын
Thanks 👍
@michaelsmith56312 жыл бұрын
Thank you Jeff.
@paul.vanhout572 жыл бұрын
69! Humbled at 65; still riding but not anywhere near your level and self-preservation a top priority🙂
@slaverace12 жыл бұрын
Keep riding!!!
@craigduffy78792 жыл бұрын
Love the videos, very informative. I have a ‘20 300XCW that I bought 2nd hand. Love the bike and have done several mods through you guys. One question I have is what would the characteristics be of having too lightweight of a rear shock spring be? While I have sag set properly I have always felt my bikes rear kicks me up over whoops instead of soaking them up. Maybe I have too light of a spring and have it compressed too much to set sag correctly. I’m ~190lbs and wear another 25-30lbs of gear.
@slaverace12 жыл бұрын
Craig: What spring rates are you using front and rear?
@craigduffy78792 жыл бұрын
@@slaverace1 I never changed them since I bought it used so I assume they’re stock but I don’t know for sure. I feel like they’re too lightweight if anything, hence why I’m asking the question.
@JamieKeefer4 ай бұрын
Head bearings have no play, but steering feels really "loose" at 50mph plus. For example, If I am riding along and I initial a slight wobble (terrible idea) the steering feels like it might escalate in to a high speed wobble… BUT it doesn’t, it settles back to straight. Is this normal? My other bikes don’t seem to steer so freely at speed. This is a 2024 FE501s for the record. I bought new fork and shock spring from you guys as well as preload spacers, oil, 50mm fork tool. That all went great by the way, suspension feels very nice :). I am just a little sketched out about the steering at speed.
@slaverace14 ай бұрын
Hello Jamie: Try tightening the steering head bolt a little more. Be sure to loosen ALL pinch bolts including the one by the steering stem.
@nick48722 жыл бұрын
Hi Jeff. Do you take into account the added weight of aftermarket bolt on parts when selecting a spring rate?
@slaverace12 жыл бұрын
No.
@richardhartley17052 жыл бұрын
Made me chuckle about spring rates how much do you weigh Jeff😁
@dimetime3332 жыл бұрын
Could you go into detail in the next sag video on the "preload" please. You said 5mm in front I believe, not sure how to come up with that measurement. And any more info pds on rear.
@slaverace12 жыл бұрын
OK. Will do.
@MrJacobMcDermott Жыл бұрын
Have you heard of Kreft Moto for suspension on a Husqvarna? I've got a TE300i and have used a lot of your components on it, i've absolutely loved you guys. curious about your recommendation on their suspension?
@DmenDuroRider2 жыл бұрын
I fully rebuild my chassis bushings, seals, and bearings every 400-500 hours. Forks get a full rebuild every 200 hours. Shock every 300-400 hours. Top end refresh and simple head job on the ktm 4 strokes every 400-500 hours as well. Every 1000-1200 hours I will rebuild the crank, and new transmission bearings. The fuel pumps seem to last me around 500 hours with being serviced around every 100 hours. My "used" bikes very well maintained. Now this has worked fine for me and what I use my bikes for but your mileage may vary.
@slaverace12 жыл бұрын
Hello Dakota: Thanks for your post but your service intervals are extremely long. I rebuild my forks and shocks at 50 hours and the oil is trashed.
@DmenDuroRider2 жыл бұрын
@@slaverace1 yeah I do change the fluid every 50 hours in the forks. The fluid gets bad quick. But they don't see new bushings and seals until 200 hours. The rear shock I don't notice a decrease in preformance until about 300 hours. I used to rack up a ton of hours in a short time on my excf 450. You're right I do let somethings go overdue the biggest one I shortened the interval on was the shock hiem joints and swingarm bearings and bushings. My numbers are also based of dual sport use the 450 sees quite a bit of road.
@mhilde7744 Жыл бұрын
Thanks a million, Jeff!!!👍👍
@slaverace1 Жыл бұрын
You're welcome.
@PBmxer2 жыл бұрын
Suspension setup is #1 on my list. I can deal with a whole host of issues on a ride as long as I am happy with the suspension. I wont ride a bike with poor suspension.
@wipperwil2 жыл бұрын
Thanks Jeff - but I have to admit, I’d rather just buy your bike when you go to get the next one… sounds like the dream rig. What are you, 6’2” and around 210lbs? If so, you’ve already set it up for me…
@elgringoec2 жыл бұрын
Good tips Jeff although it does give me pause that some of these things need mentioning 😂 It takes all types I guess. My question is about lowering a 300 pds for a light shorter rider trail riding for fun, not doing big jumps nor hard enduro stuff. A couple inches would be awesome mainly for having to get a foot down in rutted, washed out, dips, and otherwise uneven terrain. The lost travel and ground clearance wouldn't be a concern. I know I could send off the shock and forks to a trusted outfit and not be worried about the details. But I don't have the budget for that. Do you have any suggestions for componentry and procedures for a mechanic doing it myself? If that's too much for a quick comment answer, could you maybe please do a video on the topic? Much obliged sir, good people! Cheers!
@slaverace12 жыл бұрын
We have DIY lowering kits in stock and videos on how to install them. slavensracing.com/shop/front-fork-lowering-inner-kit-for-wp-xplor-by-zeta/ slavensracing.com/shop/rear-suspension-lowering-kit-for-kyb-wp-showa-by-zeta/
@elgringoec2 жыл бұрын
@@slaverace1 This is awesome, thanks Jeff! I see a fitment for my rear shock. 👍 These remind me of spacers a guy in Australia was machining I saw years ago, but he never responded and I couldn't find them elsewhere. The forks however aren't listing a fitment for my *'15 300xc-w* that was pre-explor. I even checked the other fork lowering kits for kyb/showa just in case, no fitment listed there either. Am I missing something??? Thanks and cheers!
@slaverace12 жыл бұрын
@@elgringoec For your forks we have travel limiting spacers that go on the spindle and we have shorter springs. Please contact alec@slavensracing.com.
@elgringoec2 жыл бұрын
@@slaverace1 I will Jeff, thanks! I just need a few days to tend to other projects first but this is exciting, I'm gonna make this happen. Meanwhile please let me ask you personally this about the springs: if I use just the spacers only with my stock springs, will it essentially just increase the preload? I have an ims 5.3gal tank putting more weight on the forks, currently have the preload adjustment at max, and my gut feeling like more wouldn't hurt. Or would the stock springs then touch coils and limit stroke at compression with the spacers and preload adjustment backed out to min? Me with my gear and the extra fuel is below the max weight for the chart in the manual referencing rear spring rates (my manual doesn't mention front spring rate options, only rear). It doesn't feel like I need higher rate springs. It just feels like it's usually operating a little compressed in the stroke where the damping is greater. And I've tried opening the rebound valve fully but to no apparent avail. That's why I'm thinking more preload. I wish I had a way of measuring the parameters instead of going by feel. 😂☮️
@fsrfab86792 жыл бұрын
I noticed 2 handles on your clutch side of handlebars, is one a hand brake? Sorry getting back into riding after a back injury years ago and looking into setting up a soft suspension 300. Thanks
@slaverace12 жыл бұрын
Yes, one is a Rekluse Left Hand Rear Brake kit, slavensracing.com/shop/dual-actuated-left-hand-rear-brake-kit-ktm-berg-hqv-rekluse/
@jesusfreak5535 Жыл бұрын
Great vid, helped me a lot. Thanks for sharing!!
@slaverace1 Жыл бұрын
Glad it helped!
@jeffbahr94082 жыл бұрын
Hi Chuck, what’s the extra control lever under the clutch lever?
@slaverace12 жыл бұрын
Hello: My name is not Chuck. ALL parts on my bike are listed below the video in the description. slavensracing.com/shop/dual-actuated-left-hand-rear-brake-kit-ktm-berg-hqv-rekluse/
@scarsman Жыл бұрын
Hey Jeff, awesome video as always! I wonder if you have any experience with Kreft Suspension's work? They seem to specialize in the KTM WP suspension, and I've heard good things about them from a few people. Thanks!
@slaverace1 Жыл бұрын
Hello: I personally know Adam Krefting. He's a good, honest, skilled guy but I don't think he works in the suspension shop much anymore. I've heard good and bad and it's not fair to judge his work off of others comments. Greg at www.factorysuspensionworks.com does excellent work and I have used and tested his work. It is excellent in the rocks and roots.
@scarsman Жыл бұрын
@@slaverace1 thank you very much for the response! I really appreciate the info.
@cbob1 Жыл бұрын
You mentioned tire weight . . . thoughts on UHD Bridgestones or mousses in regards to suspension working harder? I'm a few months behind you in age riding / racing Southeastern US on locally tuned suspenders. Most people comment how soft it is. Too soft and it affects turning, too stiff and it feels like it's going to break loose (probably in my head). Always a compromise (XPLOR / DelSagio + stock / modified valving).
@slaverace1 Жыл бұрын
Hello C Bob: UHD tubes are extremely heavy and the gyroscopic effect of that weight seriously downgrades how the bike turns and how quickly it changes direction. It also drastically reduces suspension performance. UHD tubes are one of the worst things you can do to your bike. The current Nitro mousses are too heavy but Michelins are not too bad.
@thanedavis12732 жыл бұрын
Thanks Jeff. One area that is not covered anywhere is what are the symptoms of a bad setup and what do I do to correct it. For example my bike understeers and climbs out of ruts. I always thought that was just my bad technique. Maybe I was not putting enough pressure on the outside foot peg. But maybe it is a bad setup. So how do I recognize that and how do I fix it? Do I go stiffer, softer, more or less?
@slaverace12 жыл бұрын
Thane: Thanks for your response. I'll try to address your concerns in a future video.
@joshuagmain2 жыл бұрын
At what spring rate do you recommend getting re valved?
@slaverace12 жыл бұрын
The stock valving leaves a lot to be desired for all spring rates. Greg at factorysuspensionworks.com does great work for a fair price.
@madman4320002 жыл бұрын
Envy you, I'm pushing 63 and want to retire from this factory job so I can concentrate on riding a lot more.
@slaverace12 жыл бұрын
Hang in there!
@mikehayes29752 жыл бұрын
I always put a little anti-seize on the pinch clamp bolt threads and shoulders to get the most accurate torque on them. good idea? or over kill? thanks for the video by the way!
@slaverace12 жыл бұрын
Any lubricant will give a more accurate torque.
@2strokerider2 жыл бұрын
Jeff, thank you for the videos you put out! I’m looking at both the Raven and blackjack cartridge kits for my 19 250sx. I currently have a pro action/pr2 hybrid now, but looking to do away with air completely. Is the blackjack insert worth the extra few hundred over the Raven and or why? The bike sees just as much moto as it does woods. Thanks!
@bloomerb41622 жыл бұрын
Bought two used 2022 ktms and the owners had 35 psi in both tires. They had the clickers on forks 35 clicks out, similar numbers on all clickers way off. No wonder they didn't have a good time riding and only put 4hrs on them.
@rposton9192 жыл бұрын
Oh boy...lol....
@chadrides914 Жыл бұрын
Dangggg 😂
@lindstrom80222 жыл бұрын
Really good and helpful video. I just want to confirm a beginner question. When people say that they have a bike with suspension for say 80kg (Europe) or 90kg and so on, is this weight including all the gear?
@videosbruno2 жыл бұрын
Should be with gear, ready to ride
@lindstrom80222 жыл бұрын
@@videosbruno Thank you 👍
@joeb28292 жыл бұрын
thanks jeff very informative. can you share some thoughts about fork height settings in one of your upcomnig videos? fork height changes on my 22 350 xcf-w made big differences. i run 2nd line from the top for high speed stuff, most trails here in wi are 2nd-4th gear
@slaverace12 жыл бұрын
Ok, I'll add it to my long list.
@squid148 Жыл бұрын
I just called you guys and told you my weight and then let you do the figures. I swear I told you my correct weight 😂!
@wbenz2 жыл бұрын
Thanks for sharing
@lopsided12 жыл бұрын
I have loose bearings on my '21 501s, 4k miles, I torqued to spec but it's still loose. I don't feel any notching. Tighten some more and make sure steering is not binding? Or replace? I had a fork issue due to my own mistake during springs install that was causing head bobbing until I fixed it. Maybe that shot my bearings?
@slaverace12 жыл бұрын
I specifically said in the video to NOT use a torque wrench. Tighten it until the freeplay is gone then go riding.
@ricknoonan86402 жыл бұрын
I see on your bench two intercomp spring rate checkers. Is one for fork springs? Also have you had experience with front fork springs going set (wearing out not holding rate) without the rate checker what is a good way to measure fork springs rate?
@slaverace12 жыл бұрын
Hello: Yes, one is for fork springs. I've been in the MC industry for 50+ years, tested 1000s of springs and have yet to see a spring not hold the rate. Yes, they can settle a little but the rate remains true. Regards, JS
@agee83222 жыл бұрын
On every bike, new or new to me, l grease everyting, check oil/air level in each fork, get right springs, get chain tension right and go from there. Never amazed by the lack of grease in a new bike!
@slaverace12 жыл бұрын
Hello: You're on the right track however the fork oil level on modern dirt bikes cannot be checked. Oil gets trapped between the inner and outer tubes and therefore you must refill and reset.
@agee83222 жыл бұрын
@@slaverace1 yes - completely agreed - l should have clarified that l changed fork oil - usually after an 1hr to clean it up. I forgot to add that here in a wet climate its good to ACF50 your electrical connections whilst its all apart. Cheers.
@Dave-so7sf2 ай бұрын
You said, there isn’t any torque setting on the steering head bolt. Why does my service manual say 12nm then?
@slaverace12 ай бұрын
Hello Dave: If you're a torque-a-holic, use the spec you found. Personally, I prefer to set it by feel, not a number.
@motojon76 Жыл бұрын
About how many spring rates can you go up before you have to re-valve?
@slaverace1 Жыл бұрын
You can easily go up several sizes.
@dirtberger4533 Жыл бұрын
Great video 🏁🏁🏁.
@gcostanza21152 жыл бұрын
Hi Jeff, My KTM manual says that when retightening the upper triple clamp "use a plastic hammer and tap lightly on the upper triple clamp to avoid stresses". It doesn't really come across clearly to me what they mean, or when and where to tap. I wondered if you know anything about it? Thanks for all the great videos you post, always interesting and informative.
@slaverace12 жыл бұрын
Hello: I have not seen that in a manual. I suppose they are implying that the clamp will stick on the tubes since the tightening is being done in the center of the top clamp. Wouldn't hurt to tap on the outside edges of the clamp when you tighten the middle.
@gcostanza21152 жыл бұрын
@@slaverace1 Hi Jeff, thanks for getting back to me. In the manual it says it only applies to specific models, my bike is the KTM 350 EXC F Factory Edition (Euro model), which may be why you hadn’t come across it. Thanks again, and i’ll take your advice when I adjust them next.
@stevenstanton503411 ай бұрын
Considering fork oil, should you stick to stock oil weight? Stock is 4w in my WP Xplor fork. Is it ok to change to 5w?
@slaverace111 ай бұрын
4wt Motorex or 5wt Maxima are fine to use.
@tonymartucci70972 жыл бұрын
Thanks Jeff
@slaverace12 жыл бұрын
You're welcome.
@bloomerb41622 жыл бұрын
With the air forks, being a beginner at 190lbs without gear, I've found that I need the psi to be at around 120. I ride mx though but if I go up to even 133psi, if I don't make it to the landing of the tabletop, the forks feel like they clank hard instead of being plush. I have the clickers on fork and rear on comfort setting. These are small tabletops and I'm not jumping high.
@LocalGarage2 жыл бұрын
that pressure is way too low for your weight. Air forks are the most plush in the upper part of their stroke. you'll want your cold pressure in the 140-150psi range.
@bloomerb41622 жыл бұрын
@@LocalGarage that's not what I've found. Tried on 2 different huskies, an 2017 and 2022. Both I tried comfort clicker settings at 148psi and on 133psi, same result. Rode two ktms, 2019 125sx and 2022 150sx. They both felt plush and they were set at around 120psi and on comfort setting. So yeah if i was faster I would need more air but I've felt uncomfortable on the bikes for past 6 months and it's bc suspension was too stiff. Now I'm riding much better and faster.
@riders.oregon44742 жыл бұрын
On my 2021 250 xc TPI I run the stock forks at 141 cold and 12 clicks out comp. Stiffer rebound too but can’t remember number. I’m 10 pounds lighter than you. When riding sandy areas I turn the comp in to about 7 out. Extremely rocky rides I will spin the comp clicker to about 25 clicks out. My revalved rear shock rides a little higher in the stroke putting a little more pressure on the front than stock requiring 2 pounds more in the fork compared to 139 with stock shock.
@bloomerb41622 жыл бұрын
@@riders.oregon4474 so your riding woods? What happens when you go out closer to 17 clicks on compression on fork and lower psi? If you have ever tried it that is.
@bloomerb41622 жыл бұрын
My friend rode all the same bikes I discussed and he is 230lbs. Said he couldn't ride the huskies bc they were too stiff. Maybe yall should try lowering psi or your just much faster and not going over big obstacles.
This applies to more than dirt bikes. Any racing vehicle, really.
@JoshStreetDesign2 жыл бұрын
Jeff how do you like that Rekluse LHRB? On my Alta MXR I run a Brembo master cylinder lrhb and it's simply amazing. Requires practically no one finger pressure to make that rear tire skid. On my 350 XC-F though I run the Ox-Brake Hydra Pro. I can lock up the rear wheel with it but it requires a lot more pressure, and over time it can really be tiring on the hand when racing at race pace speeds. I have read a lot of reviews and opinions about the Rekluse lhrb that are negative and it has always shied me away from getting one. Especially the bleeding process and the fact that people say it constantly needs to be re-bled. What are your thoughts?
@salsarosdave2 жыл бұрын
I’ve had my Rekluse LHRB since 2019, never lost pressure. Tried the hydraulic OX brake and it lost pressure within weeks of the install and again after that.
@JoshStreetDesign2 жыл бұрын
@@salsarosdave what is the stopping power like compared to the Ox?
@salsarosdave2 жыл бұрын
@@JoshStreetDesign about the same from what I remember
@JoshStreetDesign2 жыл бұрын
@@salsarosdave oh man then there's no reason to switch it them...
@slaverace12 жыл бұрын
The latest Rekluse LHRB slavensracing.com/shop/dual-actuated-left-hand-rear-brake-kit-ktm-berg-hqv-rekluse/ is excellent! It has great stopping power, does not require excessive lever pressure and has excellent modulation. The bleeding is straight forward if you READ the instructions and watch the video. If bled correctly the first time, it never needs re-bled unless you are changing the fluid. The negative reviews I've seen have all been from guys that don't read the installation instructions. Some guys need to lock their toolbox and throw away the keys.
@dirtberger4533 Жыл бұрын
Wright on🏁🏁🏁🏁👍
@thietmarosgar73612 жыл бұрын
That bike doesn't even look like it's been ridden.
@slaverace12 жыл бұрын
I try to keep my bikes in top shape but I do ride almost every week.
@joerc211v2 жыл бұрын
is there not a barber shop in Co Springs!?! get a hair cut =0)
@slaverace12 жыл бұрын
They all closed. Haven't you heard? Everyone in Colorado just sits around smoking weed, no time for haircuts. Ha!
@Mostviews1112 жыл бұрын
Need to invest in a better mic this video was horrid to listen to.
@slaverace12 жыл бұрын
I use Apple Air Pods which work very well and the video is very loud on all of our computers. You are the only one that has mentioned and issue so maybe something on your end needs turned up.
@Mostviews1112 жыл бұрын
@@slaverace1 I can hear it just fine it's the quality.
@timothymailhot8339 Жыл бұрын
what is the second lever on the clutch side?
@slaverace1 Жыл бұрын
Rekluse Left Hand Rear Brake. slavensracing.com/shop/dual-actuated-left-hand-rear-brake-kit-ktm-berg-hqv-rekluse/
@austenbirrille58212 жыл бұрын
What seatconceps seat are you running?
@slaverace12 жыл бұрын
Tall comfort, not XL. slavensracing.com/shop/complete-comfort-seat-for-ktm-by-seat-concepts/