Massey 1800 project begins. Disassembly at its worst.

Disassembly of the 1800 Massey Ferguson begins. I didn’t get far, but what else would I expect 😆

[@jondavidmcnabb]

The best part of this video is the last minute!!! Pure and utter hilarity.

[@jtsbarnngrill6873]

Thanks!

[@notajp]

That old forklift is gonna be the handiest tool in the shed! The best buy you’ve made yet…

[@jtsbarnngrill6873]

I agree!

[@jasonboyd5867]

That Rolls Royce/ Ferguson skit at the end. I'm dead 😂😂😂

[@jtsbarnngrill6873]

😆😆😆

[@EliseandDanchannel]

Love your outros. Makes me laugh all the time.

[@jtsbarnngrill6873]

Right on! That makes me happy!

[@prevost8686]

That forklift is really good for saving your lower back from long term damage. Makes me want one myself. 👍

[@jtsbarnngrill6873]

Tell ya what, that thing gets used 3-5 times a week!

[@alcopower5710]

That forklift was such a great investment.

[@jtsbarnngrill6873]

I use it all the time!

[@john1cutlass1986]

How you did that ending with a straight face? I'm just waking up and lost my shit laughing!😅

[@jtsbarnngrill6873]

😆😆. Right on!

[@northdakotaham1752]

MF going to hire JT for their next ad.

[@john1cutlass1986]

@@northdakotaham1752 no doubt!

[@dannyv2335]

That forklift was such a good purchase

[@jtsbarnngrill6873]

Right! I gut my money worth from it lol

[@gonetothedogs2872]

All hail the all terrain forklift

[@jtsbarnngrill6873]

👍🏼😆😆

[@danielelliott1570]

Humor is exceptional 😂😂 ! What a struggle with that tire glad you got it off hope the others come off easier .

[@jtsbarnngrill6873]

I hope so too! Thanks!

[@kenfrazier616]

being around vehicles from back east that lovely salt, would loosen the lug nuts and roll the vehicle forward or backwards a few inches

[@jtsbarnngrill6873]

Right! The tire place got it, but they had a few hours in it

[@richardmiels3402]

Turned into a tricky job like most do when we know what we want do but stuff gets in the way. I'm pleased you persisted; clearly shooting the tire and bolts also failed. Bit sketchy; you are worth more than our content so be safe! Regards from Eyre Peninsula, South Australia.

[@jtsbarnngrill6873]

Thanks! Careful is my motto 😉

[@markflick1641]

That old forklift is turning out to be a great investment . You be carful . Great video JT 👍

[@jtsbarnngrill6873]

Thanks!

[@Stephen-ou4sy]

Good to see Otis the forklift [named after the lift company] earning his keep. Thanks for sharing

[@jtsbarnngrill6873]

You bet! That is one handy machine!

[@Stephen-ou4sy]

@@jtsbarnngrill6873 We painted lines on the so we knew how close to the doorway we were. Once the lines line up it's time to stop going up.

[@Stephen-ou4sy]

on the sections of the mast sorry for leaving that out

[@jtsbarnngrill6873]

Right on. That’s a good idea!

[@davebur3350]

Glad to See the New-Ladder Finally Getting some LOVE...and That PEACEMAKER next to Garage-Door has Me Wondering if You were about to SHOOT the Wheel&Tire OFF of the 1800!!?...No-Wonder why FLUFFY Doesn't Hang-Around much...She probably Knows You are TRIGGER-HAPPY💥💥💥😱

[@stevec5338]

Best welding rod around. 52 years rust & gunk. 👍👍👍👍

[@jtsbarnngrill6873]

You got that right!

[@mwilliams8288]

Too funny. “Massey Ferguson”

[@jtsbarnngrill6873]

😆😆

[@user-ot9bm3by5t]

Jt looks like you have the same mess while working on something. What should be fairly easy ends up being absolutely as difficult as it can possibly be, so good luck brother.

[@jtsbarnngrill6873]

That’s the way it goes 😆. Sometimes I have those days lol

[@jefferyhubbard9591]

Get yourself a cherry picker, it'll work great for those tires plus other lifting

[@Marcvandenenden]

It ain't that easy J.T. Working alowne ain't bad but not always easy. 😉 Keep it up J.T. Wish you a nice weekend. Greetings, Marc. 🤠

[@jtsbarnngrill6873]

Right! It ain’t always bad 😉

[@user-dd8wh3xi6u]

You should have had fluffy helping with the tire. Then you wouldn't have been alone. 😊

[@trentonromig9765]

Put some blocks down in case that Jack kicks out buddy hate to see you get hurt

[@GaryYff]

When you finished sprucing that massey up it’ll really be a sexy machine.

[@jtsbarnngrill6873]

Thanks! I hope so!

[@darrellfxdwg]

If you drill or torch some holes a few inches back from the tip of your forks you can put a clevis on them and use it as a crane. The clevis will also stop a ratchet strap from slipping off the end.

[@jtsbarnngrill6873]

They have them. If you watch when I pull the tire outside I pull a screwdriver from one of the holes, it was holding a strap in place

[@garycathey7712]

JT, you scare me when you work with heavy stuff by yourself! Please be careful and safe!

[@jtsbarnngrill6873]

I will! Thank you!

[@schoubrian]

Insanely funny outro, thank you for making me laugh for 15min😂😂😂

[@jtsbarnngrill6873]

Glad I could! 😆😆

[@briannelson4493]

JT you’ll have to show us some more detail on just how that rim mounts to cause it to stick like that. I own John Deere and a Farmall M , those drive wheels are mounted with lugs. Great job so far.

[@jtsbarnngrill6873]

Right on! The tire place got it free, so I’ll be doing that next week

[@canvids1]

I watched the whole video and it moves on to the next one before I can post. Anyhow a great video and a very tuff danger-est job. best thing you did was buy that fork lift. message to self next project fix the jerky clutch.

[@jtsbarnngrill6873]

I’m not sure how to get that thing to go smoothly. But at least it goes and lifts 😉

[@den-nap4974]

Never had anything go easy or as I planned. I can feel your frustration too. Oh well

[@jtsbarnngrill6873]

It happens 😉

[@ronzezulka6646]

Hey Joe,,,so,,where do we start?? The 1800 is gonna turn into a grumpy old bastard. Otis is earning his keep. The shop is perfect. The gunslinger is laughing his duals off. Hot chick's and gunslinger. Definitely blue mountain madness. Cheers buddy 👍

[@jtsbarnngrill6873]

Right! 😆😆. Thanks!

[@terrycannon570]

JT I got to give it to you the ending was not only funny but creative. I really think Hollywood is under serious threat from You Tube creators like yourself. As Harold from ARW would say KO-KO (Keep on Keeping on.) .

[@jtsbarnngrill6873]

Right on! Thanks!

[@user-hs7bz5zs1o]

Good thing you’ve got the forklift! 😅

[@jtsbarnngrill6873]

Right on!

[@iainpaton1865]

Keep the great videos coming friend. From Scotland

[@jtsbarnngrill6873]

Thanks!

[@SODAK2276]

Nice that you have the space to work now!

[@tj.farmer3905]

Hi JT it would have been a cool project to see you fix up The Mello yello she lifts pallets and tires and all sorts of other things she deserves some tlc🥰😀😀😀

[@jtsbarnngrill6873]

All in good time. Got 4 projects for summer and the forker is one of them 😉

[@tj.farmer3905]

😃😃👍👍❤️😃👍👍👍👍👍👍❤️👍👍👍👍

[@JS-1983]

That end of the video 🤣

[@jtsbarnngrill6873]

Thanks for noticing!

[@derekadams729]

That fork lift was a god send JT. Love your work.

[@jtsbarnngrill6873]

Thanks!

[@zendoargos4988]

If that tire really is the original to the tractor it's no wonder that it wouldn't come off easily. That's more than just rust at this point, it's fused on there. As the project gets frustrating remember how much easier it is with your new spacious shop, your smooth concrete floor, and your forklift for mechanical assistance with heavy parts. I'm looking forward to seeing the old girl all dolled up.

[@jtsbarnngrill6873]

You are right! That would have been a nightmare in the old barn with no forklift!

[@McCormickfarrier]

🤣LOL... Rolls Ferguson... man, it's gonna be a hell of a job with her.... the new workshop is just awesome! - Love that episode! 👍

[@jtsbarnngrill6873]

Thanks very much! I appreciate it!

[@TKM1951]

As said before . Nice shop !

[@jtsbarnngrill6873]

Thanks 👍

[@larryklostermann5779]

Nice video JT. The forklift has really been helpful.

[@jtsbarnngrill6873]

Sure has!

[@ryanduren2739]

The rabbit doesn’t always win the race. I bet it looks kick ass when ur done!!! Hell that’s like wrestling a damn grizzly bear. U will find ur rhythm.

[@jtsbarnngrill6873]

Right on!

[@LOGs502]

I'll tell ya, I'm weirdly excited about this project for whatever reason. Grew up driving masseys (1100 and 175gp) All those wood blocks remind me of putting away the 1100 after mowing jobs because you never know if you picked up a small leak at some point. It kept the frame up in case one ran flat overnight. Thankfully never needed it.

[@jtsbarnngrill6873]

Right on!

[@ardtessa]

The outro was brilliantJT !! 🤣🤣🤣🤣

[@jtsbarnngrill6873]

Thanks😆

[@whodathunkithuh1001]

Maybe loosen up the bolts a little and drive the tractor back and forth to loosen things up ahead of disassembly?

[@jtsbarnngrill6873]

I will on the next one

[@blackf350]

4:40 Was waiting for the Real American Theme Song to kick in.

[@jtsbarnngrill6873]

Ha! Almost did lol

[@farmark457]

A side shift forklift would sure have been handy with the tire removal. Keep your eye out for an upgrade 😊. Thx

[@jtsbarnngrill6873]

Right on!

[@davidbarnes706]

Like your videos please be safe

[@jtsbarnngrill6873]

Will do!

[@richardschaffling9882]

Great ending and I guess after all those years she just did not want to give up her wheel as for the rain we are the same way here in Tn buy that is ok it’s better then 30 miles from me they had tornados keep up the great videos .

[@jtsbarnngrill6873]

Right! Glad you’re ok down there

[@dertrommler2112]

I think Otis is a good name for the forklift

[@Dan-vv1tl]

😂 great video especially the end very funny

[@jtsbarnngrill6873]

Glad you enjoyed

[@tmwinkler]

Best ending EVER! Cheers!

[@jtsbarnngrill6873]

Thanks!

[@cspfitch]

Great job!!!

[@jtsbarnngrill6873]

Thank you!!

[@peterfox6256]

Love the outro

[@jtsbarnngrill6873]

Right on! Thanks!

[@cynthiatrombley4325]

Another great video and the ending was a hoot!

[@jtsbarnngrill6873]

Right on! Thanks!

[@MasseyDave]

Big job hard work , well done 👍👍👍👍

[@jtsbarnngrill6873]

Thanks!

[@3767712]

Love the videos man keep on keepin on. Cheers from upstate NY.

[@jtsbarnngrill6873]

Thanks!

[@arthuroffill8005]

I thought you was pulling the big guns out.

[@markklumpp39]

Cannot wait to watch the transformation

[@jtsbarnngrill6873]

Thanks! Hopefully in the next few weeks!

[@robertclements7835]

Great job JT.

[@jtsbarnngrill6873]

Thanks!

[@thomasjones3946]

Another great one JT especially the end 😂😂

[@jtsbarnngrill6873]

Right on! Thanks!

[@stevecolwill5681]

Brilliant J T . Your a winner

[@jtsbarnngrill6873]

Thanks!

[@robertnelson5064]

You have got your hands full. Be safe and keep up the good work.

[@jtsbarnngrill6873]

Thank you, I will

[@user-kd4jm7dz1r]

Love the ending lol!

[@jtsbarnngrill6873]

Thanks!

[@Nick-nw6zg]

Boy that forklift coming in handy now ain’t it👍🏼

[@jtsbarnngrill6873]

Sure is! Gets more use than anything!

[@dp8689]

Wow, you have more patience than me.Good luck

[@jtsbarnngrill6873]

Thanks!

[@mikeschafer9948]

Great Video JT! Love the Hulkamania shirt😂

[@jtsbarnngrill6873]

Classic 😆😆

[@chadtosh6831]

Hulkmania T-shirt and working hard banging away. Love it. Lmfao 🤣

[@jtsbarnngrill6873]

Right on!

[@AndrewHCann]

Excellent video JT :) also yes some tire get of rims & putting back task to and have had my share to included! I said to lots place work for doing tires said owners run should be took off and on lots for 5 years for each tires of any vechiles so be easy to do when needed repairs or replacement! Yes be costly but much better and to less problems!

[@jtsbarnngrill6873]

Right on!

[@AJ67901]

You are liking that forklift!

[@jtsbarnngrill6873]

Sure am! I use it all the time!

[@mrclaus859]

Thanks JT

[@jtsbarnngrill6873]

😃

[@johnwesner3935]

Well it, as they said in the movie, " you may have to reevaluate your decision making paradigm"! Farming and old tractors??😅 Why do men find satisfaction and humor in another man's struggles? Been there?? That's for making me smile!

[@jtsbarnngrill6873]

The struggle keeps it real 😆

[@josephatherton2781]

Good going J T , a lot of work removing panels and preping for painting . one stubborn tyre , rim and Centre .

[@jtsbarnngrill6873]

Right on!

[@kurtreinhardt6789]

Great work so far- most bigger projects seem to get bigger once you dive into them

[@jtsbarnngrill6873]

That’s for sure!

[@wandahelmer1038]

New build ✅ next Gantry for new building 👷‍♀️ 💪 😅

[@jtsbarnngrill6873]

Yes!

[@myallisg3388]

That would be where your forkilft would work well with handling those tyres off of the tractor.

[@jtsbarnngrill6873]

For sure!

[@themarinerkommer4371]

daym, the noise that forklift makes through that mike you have sounds like its alive some animal. cool sound effects i reckon JT.

[@jtsbarnngrill6873]

Thanks!

[@LouisvanWijk]

Holy shit man, put some blocks under it, instead of one lousy jack. (Ah much better later in the vid)

[@corydriver7634]

If you don’t mind my asking about how much does it cost to have a tire like that removed and replaced? The forklift may not be perfect but wow what a genius purchase that has turned out to be. That last bit at the end was hilarious dude😂😂😂 I was dying. Be safe out there JT.

[@jtsbarnngrill6873]

Thanks! They charge me 100 bucks to change one out. 75 for the 18.4’s

[@user-we9nh4wi9q]

JT. Same here in Curtice OH. I have standing water where I've never had

[@jtsbarnngrill6873]

It’s terrible this year!

[@e90jmeck26]

Really glad you bought that forklift!lol

[@jtsbarnngrill6873]

Right! That thing is awesome!

[@devonatwell1088]

Love the shirt

[@jtsbarnngrill6873]

Thanks!

[@northdakotaham1752]

That ending was hilarious! MF should hire you for marketing..lol! As for those tires and hubs...I can certainly see that you won't want to reinstall that old tire and have to remove it again. I have the same deal on my 1805 plus a Steiger with MF axles. About all I could suggest would be loosen the bolts slightly and drive it around the yard bit. Do all four at the same time. I ruined one of those tapered hubs once...which I still need to find in the boneyard somewhere...hopefully!

[@jtsbarnngrill6873]

Right on! I’ll be doing that on the next one for sure!

[@user-yl4kj9ft9s]

I wish I still lived in Kalamazoo. I would help ya!!

[@jtsbarnngrill6873]

Right on! Still 31/2 hours away lll

[@zerogravity8465]

Buy a jack Up pallet hand truck for moving pallets about,,,,, they are great for removing your tractor tyres and truck tyres

[@dp8689]

That is so funny at the end😂😂

[@jtsbarnngrill6873]

Thanks!

[@grahamclark7594]

🇸🇪 keep at it JT, you will get there in the end.

[@jtsbarnngrill6873]

Thanks!

[@AirplaneDoctor_]

I feel your pain, I've managed to do my burn down spray and that's it, ground isn't solid enough even with duals and can't dry with all the rain this spring.

[@jtsbarnngrill6873]

Hope it drys out soon!

[@terrimartin8630]

Whatever that was at the end of the video, I liked it !

[@jtsbarnngrill6873]

Great! 😆

[@peterbenson3776]

Door #1 😂😂 you’re killin me

[@jtsbarnngrill6873]

😆 right on!

[@jeepanimal2943]

As for the RR ad on the end. Don't worry JT. Rolls will haul 2 people, so wil the MAssey. A lot of that fancy finish material sounded like plastic, compared to the rusted steel and aluminum on the Big Girl. That Royce won't haul 15000 lbs. EVER! Both will take yer girl to the lake. The Fergy will pull the RR out of the lake. The Fergy will pull the RR into the lake, and laugh. The RR will slowly drive away from the lake quietly, calmly over gravel roads. The Massey will sit quietly, playing Nitty Gritty while you and the little honey, do a little "Fishin' In The Dark." Ifffin you know what I mean............ And a second thought, Take the forklift, lift the tire back up straight, put a stump where the center piece would sit, knock the wheel back over. Weight and a force in motion. MAybe, pop that center right out. Just a thought.

[@jtsbarnngrill6873]

Right on!

[@jimsgardensandrabbitry]

Thanks for sharing JT. I feel your pain. Hard to do everything on your own and that is what I unfortunately have to do. As soon as you brought the forklift into the picture, I thought, wow, smart buy and glad JT took the time to get that up and running. Smart move. I busted a gut at the end. Enough so my wife came over to see what I was laughing about. Have a blessed weekend.

[@jtsbarnngrill6873]

Thanks very much!

[@waynemclachlan6480]

The Ruger at the door entrance...is that for amazon parcel thieves 🤫🤭😆

[@jeepanimal2943]

It's Fluffy's. Fergot it in the shop after mouse huntin'.

[@jtsbarnngrill6873]

Yes! She is the mad killer 😆😆

[@LynnKorte-ve4qf]

Clean and do the cabs interior on this one ,,its worth it I would say if everything else cks out great ,as you go thru it,,paint up some of your parts in the barn shop leaving your new one open for more service work and teardown,and so to keep the paint off the floors😊

[@jtsbarnngrill6873]

Cab will get a makeover on this rig!

[@LynnKorte-ve4qf]

Order your decals from a vinyl print shop after overlaying and rub copying them with a pencil and tracing paper that are on your tractor.,before you remove them old ones ,so the print shop can set up their computer easier,so to cut them out .I would have the print shop make them up in a satin vinyl,put them on after you base coat is sprayed and then spray the clear coat over all to seal them edges in so not to lift and peel over time,,be careful when spraying over the vinyl area, and spray lightly and let it tack up there cause the clear there might run before it tacks up,if you spray it to heavy at once there. Been there done such,,the decals last forever after sealing them in with clear coat,,the print shop can make those decals alot cheaper if you do it locally,and if you mess one up they'll still have in in their computer to do over

[@jtsbarnngrill6873]

Right on! I was actually thinking I’d do that scribble trace thing to make sure they’re perfect

[@rayscrafield2106]

Geez J.T. you must be having a bad day. I was just messing with you. I sold tools for 40 odd years and believe it or not, there is a difference. A claw hammer doesn't have as hard a face as a ball peen. It's made for driving nails. A ball been hammer is made for hitting hardened surfaces. Anyway, I like your videos and lately I've noticed others besides yours where folks are using the WRONG hammer. I say it for your safety. A claw hammer might chip more readily than a ball peen and you only get 2 eyes. Anyway, have a great day and please do keep up the great content. I like it.

[@jtsbarnngrill6873]

Right on! I appreciate that, I will need to invest in some ball hammers.

[@rayscrafield2106]

@@jtsbarnngrill6873 Do you have any tool trucks that come by anywhere around you? And I don't mean Matco. Snap-On, Mac or my favorite, Cornwell tools all sell great stuff. If you buy cheap tools, you will just have to buy them again. Anyway, to my point, run down one of those trucks and buy a couple of the popular sizes. 12, 16, 24, 32. ounce. They will outlive you if taken care of. My preference is wood handles. I always wrap the handles with duct tape from the head down to just above where you would grab it. That will save the handle if you miss your target. You won't regret it.

[@jtsbarnngrill6873]

There is a snap on and Mac that run the area. I have got snap on tools from the truck when I catch him at my local auto parts.

[@rayscrafield2106]

@@jtsbarnngrill6873 Well of those 2, I'd opt for the Snap-On. A bit pricier but they are always around. No matter where you go. Cornwell is the oldest tool company but still employee owned so they are growing a bit slower. The quality is right up there with Snap-On though and quite a bit less money. Igf I knew where you were located, I'd try to get a truck to stop by.

[@CoreyBrasher]

Dad bought a Case 4690 a while back, then turned around and bought a 4890 with a bad transmission too. I asked why? Turns out the 4890 had the wide rims already added like you have. Dad said the factory 18.4-34 tires were $1200 each plus $300 tubes and the big ones were basically free at the junkyard off combines. He had a company come out and do his, because he knew it would be a fight to get them off the rims. The cost of the tractor was equivalent to the cost of the four new 18.4-34 tires!

[@jtsbarnngrill6873]

I believe that! The tires I’m putting in this were all combine tires.

[@douglaskauffman2692]

I will def miss the Red Shed

[@jtsbarnngrill6873]

There will still be production from the old barn!

[@DirtyD1976]

Fix that water hose Ol son that kink will ruin it. And put tire and wheel back on with bolts loose and drive it around a little bit.

[@staceyhepburn3201]

Made my back ache to watch you swing sledge hammer, only because of my lower back problems lol

[@jtsbarnngrill6873]

I slept good that night lol

[@MarkAllenNorCal]

Nice

[@jtsbarnngrill6873]

Thanks

[@660r2003]

man ive done that same kinda shit with you did with the JD in tough situations even though its not what u want to do in the first place, hopefully the hulkamania shirt gave ya a little boost moving the heavy tires lol , looks like the forklift is already paying for itself so that awesome too! nice work !

[@jtsbarnngrill6873]

It helped 😆😆