Junkyard Iron Block Gets EFI and Hits The Dyno - Engine Power S1, E2

[@Onethirtytwo]

The Holley Terminator is a self-learning system; a learning computer, sent back in time to save John Connor!

[@Onethirtytwo]

@@mctigmctiggy1475 It's not a TOOMA!

[@TengoChorr0]

We got skynet by the balls now

[@Onethirtytwo]

Torque wrench...

[@johnwilson1784]

Phased Plasma rifle in 40 watt range.

[@michaelwoods3850]

Bring me the Holly if you want to live,the machines are coming

[@generalsixty2133]

Back in 2012 when I built my 6.0. A Holley rep said they would never build a harness to plug the Terminator TBI into their LS harness. So we made it to work. I was likely one of the first in the world to install a Terminator TBI / HP ECU/ Edelbrock dual plane combo on an LS. Around 2015 Holley started making the harness to do that.

[@bentleyclouse3311]

Thats frigging awesome

[@generalsixty2133]

@@bentleyclouse3311 It looks cool but the intake performs no better than a truck intake. If I was to do it again I’d go with a FAST intake. 50 hp more.

[@bentleyclouse3311]

@@generalsixty2133 wow 50hp is huge. I actually believe your story and I'm impressed. Wished you was my neighbor!!! Lol in middle Tennessee no one does LS stuff. Not in my area.

[@generalsixty2133]

@@bentleyclouse3311 You can always buy a GM that came with an LS from the factory. Then do bolt on upgrades. Easier than a swap into an old car. It’s all just time, money and space to do it. Have fun!

[@dscuderia2189]

An Aussie living in Spain. Love watching your vids, guys 🙌🏼 I love watching your work, Tommy, Joe, Mike, Pat, Ryan, Kevin, LT, Austin... I know I'm missing a few 😅 keep it up

[@billyhellboy6138]

Put another shrimp on the barbie eh Kangooroo sport eh you wanna beer mate FOSTERS is the one u want eh champ watch out for drop bears and crocodiles eh mate

[@stitchjones7134]

Not much muscle or pony in Spain I'd imagine.

[@diduck6878]

@@billyhellboy6138 Victoria Bitter is drank more than Fosters

[@markhuffstetler1315]

Joe nice work , miss the shows on TV . I am a oldman not real up on this new stuff, keep up the good work.

[@utahcountypicazospage5412]

I always like more cubes because the numbers are always better but this 4.8 is impressive

[@BrockGrimes]

I've seen a 4.8 with a LSX intake, heads, and cam make 475hp

[@2loco]

I'm a Ford guy currently driving a coyote V8, but I admit I've got a big love for pushrod chev V8s 🤫

[@eldel5.023]

I know what you mean brother. Also own a 5.0 and since I love LS power also own a single cab Silverado with a 448 stroker. And for last project I jst bought a 6.0 with tranny for complete swap on a mustang 2005 v6..... Why hate when you can own both!!

[@2loco]

@@mikec9112 yes you are right. It is a subaru boxer...

[@KPearce57]

572 Crate motor with high rise Holly Port Fuel Injection Hedman Headers long tube . 1060 hp in a 1975 GMC pickup . I love it.

[@joshtheking1772]

....and about 5 miles per gallon driving like a granny.

[@johnherdener6801]

@@joshtheking1772 and $17,000!!

[@hawkdsl]

The LS with the Holly TBI and MSD box is a really nice set up. Pretty trick having a mounting point on the intake for the MSD box. It would be a clean looking install. I can see this being a nice swap for the GMT400 trucks.. allowing an easy stock computer delete. Tying it into the dash harness wouldn't be that difficult either. It would be on the expensive side.. but dropping this into a cherry or restored car/truck would be worth it. LS power and reliability with a simple self learning TBI.

[@Lilanddad]

I’ve done it in 24 hr and thought I was the shiznit. 1h41m is impressive 👍

[@tmo2798]

It took my brother and I a week for a clutch job and I thought the same.

[@klk1900]

when I was racing under sponsorship I had my pit crew swap my qualifying engine to race engine. In 36min in a competition we had. Just to be clear I wasn’t involved with it. I just had to watch and hope we won. It was a competition to give our crews lime light for once. It’s actually a lot difficult than people think. They had to work around the ridiculous amount of pipe that’s all one giant piece connected into the roll bar to withstand 180mph impacts.

[@Matthewzilla]

They said 10.5:1 compression but, the 243 heads that were installed have an extra 3.3cc combustion chamber volume. They are closer to 9:1. I have a 4.8 with a slightly milder cam, but milled 706 heads and .040” head gasket. It makes 10.2:1 compression and I was over 380hp. Can’t remember the torque. At the tires it made over 280hp/280tq at 4700rpm. Had to shut down early due to high wheel speed on street tires.

[@skwerlee]

Good ol' Joe. I always liked him.

[@dakotawilkins-gillam2719]

Same

[@jasonhastings5538]

I started watchin horse power as a kid!! Always liked Joe, he has done afew other tv programs aswell!

[@brandon5839]

He's a prick in person

[@robertwest3093]

They set this dyno test up to sell Holley EFI systems. They crutched this motor using 570 and 600 cfm carburetors. I don't care what the carburetor cfm formula says, an engine with heads that breathe as well as the LS6 heads is going to choke on a 600 cfm or smaller carburetor. That's one reason why the 1000 cfm throttle body made 17 more horsepower!

[@24theMoney]

Joe was the Man...the voice of horsepower. RIP

[@NorthViewModelShop]

Great video. I find my self now at 37 years with a 68 AMX looking for a motor option. This video was very helpful

[@dogdue4588]

Luv the show guys! I have an '06 aluminum block, aluminum head, 8th digit "B", 5.3. Supposedly 340 h.p. 170,000 miles. Runs excellent! Would really appreciate some h.p. upgrade suggestions. Thanks...

[@frankcherry3810]

Hey guys, I wish you would do a dyno video showing how having improperly adjusted valves (too loose, too tight) affects performance.

[@johnsheetz6639]

I believe Richard holdener does something like that check it out.

[@robertwest3093]

Richard Holdener is THE man when you are interested in the before and after installation of performance parts. I think he has covered everything I have wanted to know.

[@jacobdavie7856]

I got an 81 camaro, and we just started our engine swap a couple days ago, we got the old 267 out and we got a rebuilt and bored over 305

[@kenlutter2065]

While your building it you might as well go with 350

[@jacobdavie7856]

@@kenlutter2065 the 305 took a crap last year😂 its got a 350now😂

[@cooleyhy]

Watch out when those "Secont Dairies" open up. They're known to make much more power than regular ol' secondaries! 😎

[@unicornsteaks6769]

The 600 CFM carb only cost three hunnert and ninety fi' dollars

[@willisknotme6042]

Would love to have their rock bottom budget lol

[@jacksonmeads1161]

Same. And their skill. I dont know much so it would be nice to have a fraction of their knowledge

[@Slaktrax]

Don't forget installed power is going to be quite a bit less than those dyno numbers.

[@MazzaFiveOneFour]

Every time I come back to this video, I realize more and more that this is VERY far from a budget build. Those valve covers alone are over $400, and those coil pack brackets are 179. That harness is 1k+. No idea how they come up with budget when there's nearly $5,000 in new parts alone here.

[@darrenspicer5976]

@@MazzaFiveOneFourbudget for the guys running 60k engine builds

[@onebadbowtie86]

Wong on the knock sensors location and 24x/58x. Some were still 24x with the knock sensors on the side of the block.

[@JMPK23]

I would love to see what a lq9 with one of these holley efis and a t56 would get get for fuel economy.

[@looloo6322]

I'm have to stop watching this channel, it's going to get me back into my old hobby.

[@raymondguzman5083]

Why did u stop?

[@smallchungus6967]

This Makes me wanna start a new hobby lol

[@looloo6322]

@@raymondguzman5083 Life sort of got in the way, I moved to Manhattan from Connecticut for my job, sold my '71 Z28 and here I am 40 years later watching this channel and dreaming about a nice '69 Camaro with a big block. I will say I missed the rush of my race car every day of my life.

[@davidjaime2061]

Keeps me out of trouble

[@pablorambo123]

will probably never even touch an american engine, but god dam do i enjoy watching this show. so well presented, well done boys!

[@lucysmith4242]

I'll send you one

[@eternalthread7846]

Put a Holley high ram intake and sent it to 7k+ rpm and you’ll be in the 400+hp range, 4.8s love to rev

[@ragimundvonwallat8961]

would they last in a street application shifting 7k everyday???

[@eternalthread7846]

@@ragimundvonwallat8961 yes as long as upgrade the valve train

[@ragimundvonwallat8961]

@@eternalthread7846 oh well if the bottom end can handle it all stock thats a great cheap little set up

[@eternalthread7846]

@@ragimundvonwallat8961 the bottom ends in these things crazy strong and the 4.8 is the best out of all of the truck motors for high rpm use bc of its short stroke

[@ragimundvonwallat8961]

@@eternalthread7846 if id be a gm guy i would swap one of those puppies into a 80's camaro instead of figthing with those useless 305.... dont tell me those dont suck, they always have and always will lol =P those 4.8 look like gold in comparison

[@Trapper50cal]

Man...a 944 or 928 with a blown motor plus one of these equals tons of fun and a decent sleeper. Or a Regal :-)

[@johnherdener6801]

I have a blown engine 944 that was supposed to get an LS swap. But, I turn 70 this year and have to many other projects to do. The 944 weighs 2600 lb, but the 928 weighs in at about 3800lb. But, I will admit that the 928 is a really nice Hiway cruiser.

[@ragimundvonwallat8961]

@@johnherdener6801 928 were nice, i wish i could own a fully stock one

[@anthonyostermyer5242]

Nice power but do you plan on doing a 4.6 l sohc pi motor

[@brianbessette6413]

I have a 71 Camaro that i did a 4.8 ls swap in im using the self tunning efi im Makin a tad over 440 hp i did a full rebuild 30 over bore long tube headers i used aftermarket heads

[@davidwhite8967]

I've built a 16.51 to 1 compression British Ford Essex V6, 3L swept volume. I think it will make more HP on E100 than any comparable I-6s and many V8's and still have better Emissions

[@CrabSpirits]

This setup is great for wowing with the open hood at a cruise night. But it'll be only old dudes who aren't familiar with LS engines and high school kids who haven't seen the other hundred KZbin videos where people are making way more power with a $500 junkyard pulled motor set.

[@kravmaga7070]

how easy is it to get these engines from junkyard complete with stock ECu and harness? and how hard is it to get those complete engines running in an old pre fuel injection chevy car/truck?

[@lucysmith4242]

It's decently easy. You have to figure out if the junkyard you go to will nickel and dime you for each accessory. Normally it'd cost 500 ish full dress if you pull it yourself and 800 full dress if it's already pulled. The engine is a decent bit shorter than gen 1 and 2 small block chevy's. The mount location is also different. If you use adapter plates than you can keep the stock transmission location and even use the old small block chevy engine mounts. The only thing I advise to watch out for is to make sure you have enough room at the back of the engine. Like I said the ls engine family is shorter and the engine will sit closer to the firewall. So make sure you have at least an inch or two of clearance behind your stock gen 1 or 2 sbc. Also have to pay attention to flexplates. The dished one will need a little adapter piece. It's like 30$ not a big deal. Then there is the computer. You can opt for MSD 6014 box and intake which will set you back 750$ ish depending on sales. This will allow you to use a carburetor. However it gives full ignition tuning capability. If you want EFI and full ignition and fuel tuning capability there is holley terminator x for 1,000$. This is good for forced induction and larger injectors. If you are doing a mild cam with the same injectors and keeping the MAF sensor then you can just tune the stock ECU. If you are doing no cam, no injectors, naturally aspirated, with stock MAF, you can just use the stock computer with the "Vehicle Anti Theft" system disabled (cost like 60~70$). If you do a carbureted set up you would need a low pressure electric fuel system, if you are doing efi you would need a higher pressure electric fuel pump/system. This can be as simple as a bosch 044 ziptied near your fuel tank with rubber efi line to the rails, or as complex as a sumped fuel cell with -10 hard lines and a magnafuel 4303. Depends on how much you want to spend and how neat you want it done. If you are serious about it check out Sloppy Mechanics, A21 Bravo, Driveway Engineer, Squirrel Tuned, Night Wrencher, Richard Holdener (for combos), and LS1Tech.

[@kravmaga7070]

@@lucysmith4242 Thats a comprehensive response especially from a "girl" ? Ive since already bought 2 -5.3LS engines. One came w/o ecu, alternator, starter or manifolds but it was a mere 200 cdn with another 80 if he comes up with ecu and manifolds[and maybe starter but he sold alternator. ] My second LS is a complete cutout inc all accesories, starter, manilfold and even maf sensor intake all for 445 cdn BUT it had 2 broken manifold bolts, one he showed me and one i twisted off rather easily. the one he showed me came out easy as it had 1/2 inch sticking out but one i broke i spent a few hours yesterday with mig and easy outs and failed with both methods to get it out. So i will try again today with fast freeze 6013 stick welding to remoe it but failing that i may have to swap the other LS head on there :-( which im guessing will be new head gaskets, maybe intake gaskets....might even Balloon into a new CAM[elgin 1840p or summit 8712] which require no new rods or rockers anything.] but will still be almost the same price as i paid for entire cutout.

[@lucysmith4242]

@@kravmaga7070 yeah it always kind of snow balls out of control. If you still through the bolt/stud, all the way through with a drill bit about half the diameter it will relieve most of the pressure. That's how I used to do them in the Machine Shop. Sounds like you got good deals on those engines!

[@kravmaga7070]

@@lucysmith4242 not sure i can dril it now since an extractor is broke off in hole. ?

[@lucysmith4242]

@@kravmaga7070 Oof, that is tough tough. Beyond my level of expertise. Most machine shops should be able to extract it through creative means for maybe 30$

[@Chris-ux5nl]

Nothing like EFI 😎

[@fabianmedina9966]

What truck and year was that ls pulled from?😮

[@zososldier]

Ooooor you could just use the factory fuel injection and intake manifold. Sending your harness and ecu out to get cut down and reprogrammed for stand alone only costs around $500.

[@Keeterbob]

On the 570 carb what were the jets sizes and squirter size? What was the timing curve on that run? What was the AFR also?

[@martinprehjan9944]

Where do you guys get your parts and prices from? I have not been able to find that first Holly...the 570 for anything less than close to 500 bucks!!! You guys are quoting 370, please enlighten me on this!

[@monikhushalpuri]

This episode is from like 7 years ago...inflation

[@martinprehjan9944]

@@monikhushalpuri I see! My apologies for not thinking of that!

[@memphisreigns1498]

THIS WAS FILMED 🎥 IN 2013 they never tell you that so I will 🤫😁

[@cowboy2251]

how do you know that

[@scotthartwig7190]

Come on guys, y'all know that engine is good to 7,000 rpm if you have the right fuel in it

[@tmo2798]

91 or 92 octane maybe? They used 89.

[@danieldoss3937]

But what was the rattle/knock when you shut it off? Didn't sound healthy

[@fastmonaro05]

Great Video. Can anyone tell me what cam duration @ 050 plus lift this motor ran???? I take it was a Roller cam.

[@johnherdener6801]

@@thomasdaddio741 113 LSA. Plus that cam is for the 1800 to 6800 RPM range. If they would have gone to 7000 I think 410 to 420 HP would have been the result.

[@jappsautomotive4210]

I thought the Ls builds needed some kind of crank case ventilation system.

[@blownaway4371]

What are the specs for the 'Comp Cam'? You guys post all the other parts used...

[@ec6052]

Red team looked clean and organized in appearance, I knew they were whipping the two hillbillies

[@Outlawcatfishing1983]

My only question is the oil sensor on the back of the engine. What did you do to bypass that?

[@davidreed6070]

All ls engines need is CAM I bet the (right)cam would ad 60 or more

[@hardball107]

Sometimes lots more.

[@PlugInRides]

If the EFI setup costs almost $2K, how is a more expensive LS junkyard engine, with existing EFI, not a better option?

[@jeffreygout]

How is it a budget build if you pay 600 dollars or more to remove power by carbureting it?

[@SGTJDerek]

Stock 4.8 that breaths. I wonder where the fall off would be. They didn't really zing it that far. Farther than you'd need on the street but still.

[@athosndl]

One of the best car shows EVER ! When you will do a video on a 5.7 LT1 from 1993 ? That whould be AWESOME ! And tell us if that torque head 24x conversion is the Best way to get rid of the optispark , and how much power could we get out of it ! GOD BLESS FROM ROMANIA 🇦🇩✝️🇺🇸

[@johnherdener6801]

The coil pack conversion gives about another 15 to 20 horsepower and costs about $2500. The optispark is fine if you just keep it dry and use the vented cap. You can do a lot for $2500. I built a mild ( sorta' ) 383 LT1 for my '95 Firebird formula that makes about 450 at the flywheel.

[@Oldford777]

Ford 300 build part two next???!!!

[@carltrano1325]

Best channel on KZbin

[@jarredsmith8091]

They should have raised the timing more with the carb 24 degrees seems low

[@nsmturbo5902]

They could've went a bit higher but the gains would have been minimal. These engines are a lot more efficient than the old SBC

[@tr3vorb438]

Just tuned back in after a while away. When did the ‘blonde’ conversion happen? 😂

[@danhedrick1795]

Is a 570 too small for a 5.3 with cam upgrade

[@badass4429]

Yes. 750cfm 34'timing

[@danhedrick1795]

That’s not a 5.3

[@uptownsamcv]

WHAT A SWEET SETUP !!

[@mavcar38]

hour and 41 minutes for an ls swap!! Insane, can I hire these guys?

[@eddieshabazz5603]

$275 my ass boys. The day one of your builds costs that ill give u the $275. Im calling Shenanigans

[@johnbehneman1546]

THANK YOU SO MUCH!!!! A MUST-WATCH!!!! I LOVE MY HOT ROD FAMILY!!!! SO MUCH FUN!!!!! THANKS FOR SHARING & I LEARNED SO MUCH!!!!

[@nelyh1395]

Why cam did you guys use?

[@creedosborne7885]

could I do the same build with a 5.3?

[@danross5510]

I'd like to know what kind of mpg it got 😏🙄

[@mr.b3132]

Just Tune that bad boy, and save money

[@McNabbula]

Miss Mike. Anyone know where he went?

[@PetesGarageandperformance]

Hey that’s me @ 14:13. Before KZbin fame! Lol

[@dadofmine9957]

Why did yall go with stock rocker arms? 😲

[@hardball107]

Stock rocker arms are great. The weak link is the needle bearings, they're not even full rollers. Just take them apart and I put a bushing kit in them. Solid , Oilite Bronze bushings with micro polished tool steel trunnions. 300% stronger than stock.

[@funguy7979]

Is there an EFI for a GM 572?

[@SurlyMike]

Well how about trying that with an original 283 next. Put some H.O. 305 heads on it, cam, intake, etc. Can you build it for less money than the cost of all these aftermarket parts?

[@frigglebiscuit7484]

hell yes. ls stuff like they used is $$$$$/ dont let people tell you "hurr durr stock junkyard motor" nope.

[@nsmturbo5902]

@@frigglebiscuit7484 the parts used in this vid were a waste of money, and they made less power! You can easily use a junkyard LS engine with stock parts for cheap! It's only expensive if you make it expensive...

[@katrinasunboxing7546]

Shouldnt a msd be kept cool. Like on the fender well or fire wall.

[@Mtnbike121]

"Gets efi" uh bud, the ls came with mpfi lol

[@nallen1006]

Yeah they pulled off a better system to put on some junk efi conversion kit. wtf

[@Lordspaghett]

Was just thinking the same thing

[@scottgas1299]

not everyone likes the look of the factory intake manifolds. A lot of people don't want to "mess" with efi so they go carbs bc it's what they know.

[@Lordspaghett]

@@scottgas1299 Might as well keep the stock small block if you're not willing to learn something new. The LS efi fuel system is as simple as SPFI systems get, plus the reliability aspect is amazing.

[@Mtnbike121]

@@scottgas1299 its cheaper to buy a holley efi that is self learning tuneing than put a carb, intake and msd box. Take steps forward not backwards.

[@chrishughes8504]

boy I wish I could find the same deals they are finding, priced the same build significantly higher

[@keithusace4352]

You didn't show an increase of fuel pressures switching to efi, is it not necessary with this Holley application

[@Raccoonactual]

The Holley kits come with the needed fuel pump, aswell as all the hoses and fittings.

[@albertjones5538]

What is the specs on that camshaft

[@kennethconnors5316]

this site is my "gold standard" for real and accurate info

[@xekret]

You must have never heard of Richard Holdener....

[@austindoud273]

It shouldn't be

[@frigglebiscuit7484]

@@xekret the guy that runs vs segments and doesnt even match the engines equally? mhm...no thanks. i used to like him, but he got stale quick.

[@HOTRODERify]

Should put that 4.8 into a blazer

[@jordanochoa312]

Can you guys do a stroked 4.8 or not possible ?

[@johnherdener6801]

A 5.3 is a stroked 4.8. I believe the 6.2 is a slightly longer stroke yet.

[@gregbenwell6173]

I am old school, I guess I am "too old school" because I have never had a problem with chokes or cold start problems!! Of course a lot of folks don't understand how to tune an old school carb like those on the 1960s and 1970s cars, and honestly tuning the carb was only part of the "tune"!! OR to put it another way, back years ago tuning a carb was actually fairly straight forward and easy ONCE YOU UNDERSTOOD, that you have to TUNE EVERYTHING!! This is where I saw a lot of guys fail, because they would slap on the biggest carbs, then wonder why the motor stumbled because they did nothing to Dwell, or ignition timing or even cam timing (if needed)!! They ignored that all these system interact with each other in other words!! And face it you can install the largest camshaft you engine can hold, but like tuning, if you ignore air flow through the motor you basically get the same result as a poor tune will give you!! Either super rich or super lean conditions and nothing that is a benefit to your motor or performance!!! And I live in New York State most of my life.....so I would run a lot of manual chokes, and tune my timing and carbs to work together!! Believe it or not, even point type ignition systems can run extremely well when you actually understand the basics on how they interact with everything as well!!

[@nsmturbo5902]

There's absolutely nothing wrong with running a carb, and most people that have carb issues are more than likely ignition issues. The only problem with carbs is the tunability, they are set/built for the single application that you make it be. Once they are set, well that's it... With EFI the computer can constantly change to give the engine what it needs when it needs it.

[@lewisdeclouette6342]

Man I love this show

[@getsufuma2597]

I never understood why people put carbs on LS engines...

[@johnbehneman1546]

THANK YOU SO MUCH. SO INSPIRATIONAL!!!!

[@hardcorecyclegsxr]

They didn't say what the final timing amount was. If it's only 24, that's very much

[@thomasroth4695]

Not showing the whole dyno graph ? Bet the vac 2nd did great

[@sihartobing9570]

Best Engineering Workshop The Power Nation*🌠✓ ..,... Cheerio .🌠👍👍👍🌠🌠🌟🌠🌠.

[@Funtimes670]

I realize this show may have aired before Holley had the terminator X system out but there is no way I would trade my factory injection and Terminator X on my LS swap for what they ran on the dyno. Plus, it would have made more average HP and torque with the factory injection system!

[@bmstylee]

This is probably 15 years old so long before what is available today. If you bought something without an intake setup because it was super cheap or wanted simplicity a carb still works. I would take the additional work involved to run EFI.

[@pablotharpalo5685]

I seconded what Bill said. In my case I got a 4.8 long block with a 3.9 crank So I was on my own in terms of intake and field management. So for simplicity and cost effectiveness for me TBI is definitely the way to go with a carb intake

[@Funtimes670]

@@bigboreracing356 I suppose if you want a 7000 rpm top end race car. But for ripping around town below 7k the factory injection is the way to go in my opinion.

[@Funtimes670]

@@bigboreracing356 because I have watched enough Richard Holdner videos to know that the short runner on that carb style intake will not match the torque curve of a factory TBSS or even truck intake from idle to 5k RPM. Above that and the short runner will have slightly more and peak out with more. But that isn’t where most people do their driving on the streets unless you are roll racing or have a car with a really low gear ratio to utilize those RPM. Notice how they didn’t show the entire curve of the dyno pull and only the peak numbers? The bottom end was probably lower then even the stock cam motor would be.

[@joshtheking1772]

@@bigboreracing356 i wouldn't run any of them. The EFI setup on this is $2000 and the XP your talking about is $900. Both of them are wasted money.

[@seanedwards1838]

Thats basically what they came with stock, give or take and come stock with efi. I dnt understand the point of all the money spent on parts. I love the three carb/efi comparison though

[@hawkdsl]

I think the idea is grabbing an LS out of the yard, and still adapt it without the stock harness that's probably going to be more of a headache then its worth.... which is really the best way to do it. The intake having a mounting point for the MSD box is trick and clean, and will allow wire management that wont look like a plate of spaghetti.

[@ragimundvonwallat8961]

well...stock its 255-285 depending on the years...so that would be a big no to ''Thats basically what they came with stock, give or take'' yeah give or take, only a 45% increase

[@nsmturbo5902]

@@ragimundvonwallat8961 stock 4.8/5.3 LS truck engines come with a horrible tune. The factory Dyno numbers are with all the accessories attached and a tune for economy. If you put a stock 4.8 on the Dyno without all the accessories and gave it a good tune those numbers would be well over 300.

[@ragimundvonwallat8961]

@@nsmturbo5902 gross vs net is nowhere near 45%

[@hardball107]

@@ragimundvonwallat8961 Those are factory numbers (net) and there are inhibitors built into the PCM to limit output to help the rest of the drivetrain live to 200,000 miles. Open up the intake and exhaust and any 4.8 and it will make 330-340hp, 5.3's average 370-375hp. Add a cam and that number jumps to 430-450hp and up, you can see up to a 70hp increase with a decent cam in a stock motor. Sometimes more. Over the last 10 years I've swapped lots of them.

[@JohnSmith-qj4cf]

How much for injection please why not use all the stock injection

[@diduck6878]

Right?!. And buy at least 2 more engines

[@JohnSmith-qj4cf]

Can you tell me the part number for the cam for the 4.8 please

[@TurboNFRStwoK]

Comp Cams XFI 146-426-11 Edit: They give this specs but not the part number in the pervious episode. Specs on the cam are 222in/234ex duration and .566in/.576ex lift. So I just punched the numbers in google and that’s the cam that popped up.

[@JohnSmith-qj4cf]

@@TurboNFRStwoK thks

[@xekret]

I wont daily drive my LS so for budget reasons, I might go with a carb.

[@xekret]

@@mctigmctiggy1475 ^^^

[@joshtheking1772]

Why not drive it. Thats what its for. Drive it.

[@xekret]

@@joshtheking1772 Oh it will be driven no doubt!

[@johnherdener6801]

For budget reasons just use the stock EFI. Get the harness and computer when you pull the motor at the junk yard. Modifying the harness to be a stand alone is not that difficult, but does take some time and care. But it save s you a but load of coin.

[@jakewade7388]

10.5:1 CR? I don’t think so. Not with a standard bore/stroke 4.8, flat top pistons, and 64cc 243 heads.

[@motleyw]

i was just thinking that lol i think this setup would actually drop it to 9.1:1 cr

[@garyblackledge2529]

They need to spin that thing 7,500 rpms

[@141runn]

love to see what a quadrajet would do

[@bobhilly546312156332]

When you pay 1000 ford the carb manifold and Holley mpgi wiring harness it 1100 ish it’s not cheaper to go carb

[@danhedrick1795]

Can get a carb and intake for like 600-700$ depending

[@themodifiedbranch.166]

Would those numbers be similar for a 5.3L LS. ?

[@hansm8688]

Should be better with the same upgrades. Porting the heads would also do wonders. Easily into the 400s

[@joshtheking1772]

5.3's are the budget build of the century. You have SO many options when building those. Good to 500hp on the bottom end, keep the top end stable and you can have loads of fun with those. The 6.0 liter engines suck ass, for the money you spend on them. 5.3 liter motors are where the fun is at.

[@hansm8688]

@@joshtheking1772 I agree I just rebuilt a 5.3 with 150k miles for a swap into a K5. Polished the crank, new rod and main bearings, piston rings and ported the heads. Also put new gaskets, oil pump, timing set and harmonic balancer. I'm still under 1K for the rebuild and basically have brand new engine.

[@pjnelson5827]

Roughly 10% more power from a 5.3 with the same parts.

[@wildbill6976]

factory 5.3's have better low end numbers, but 4.8's breathe better at top end

[@HeadFlowInc]

The Static Compression ratio on this 4.8 is between 8.80-1 to 9.15-1 I have no idea where they fabricated 10.50-1. Simply not possible. JD

[@wildbill6976]

ls6 heads

[@nsmturbo5902]

@@wildbill6976 LS6 would have larger combustion chambers, therefore the CR would be lower.

[@JohnDoe-ml8ru]

No Quadrajet? :(

[@79tazman]

LOL!! Quadrascrap lol they are good for daily drivers but if you want performance Edelbrock or Holley is the way to go and besides many of the late 70's and 80's quads have all the emission junk on it and the air fuel screws capped off

[@diduck6878]

@@79tazman wouldn't make the RPM. Small fuel bowl

[@Filzkiiz]

YesSiRr!!😎😁👊👌🔥💯💯!! Made it!!

[@RandomTechWZ]

Anyone else notice that he hooked up the negative terminal before the positive?

[@ralphhaldermanjr5926]

Love the Gen 2 Camaro

[@lylefoster6046]

Isn't a 2nd gen Camaro from 1970 to 1973? Change in 1974?

[@buckykattguitar]

2nd generation ran 70 to 81

[@mikesavoy8861]

Another ls, how great. Man are these motors ever getting boring

[@mikesavoy8861]

@@thomasdaddio741 yeah only Chevy guys could wish they could make power like fords do. If you haven’t noticed fords are holding all the records.

[@mikesavoy8861]

@@thomasdaddio741 my shit makes more power with iron heads then your aluminum ones do

[@mikesavoy8861]

@@thomasdaddio741 my animals aren’t dumb like yours

[@mikesavoy8861]

@@thomasdaddio741 be sure to put all that small block power threw a Ford rear as well

[@frigglebiscuit7484]

for real.

[@shawnc757]

How'd they manage to get 10.5:1 with 243 heads? Did I miss something?

[@jakewade7388]

They didn’t.

[@Aint1S]

That last closed loop kit must have had some serious problems with torque... They wouldn't show those numbers. 🤔